Dipolar Interactions Research Articles

Ordered States in Heisenberg Pyrochlore Antiferromagnets with Dipole–Dipole Interactions

Ordered States in Heisenberg Pyrochlore Antiferromagnets with Dipole–Dipole Interactions

Structural and temperature-dependent photoluminescence properties of NaBaBO3:Ce3+,Tb3+ phosphors synthesized using the combustion method

This study explores the structural and temperature-dependent photoluminescence of Ce3+ and Tb3+ doped NaBaBO3 phosphors, synthesized via combustion. Analysis of their crystal structures confirmed excellent alignment with the standard PDF#98–008-0110. Investigation into both room and low-temperature photoluminescence revealed that the dopants have a significant effect on emission spectra. Ce3+-doped samples exhibited excitation peaks at 275 nm and 358 nm, leading to a primary emission at 419 nm, with enhanced low-temperature emission suggesting reduced non-radiative processes. Tb3+-doped phosphors showed excitation from 250 to 377 nm and emissions from blue to deep red, including strong green emission at 550 nm due to 5D4→7F5 transitions. Optimal doping was found at 1 mol% for Ce3+, while Tb3+ showed increased luminescence up to 3 mol%, with concentration quenching observed beyond these points. The study indicates dipole–dipole interactions dominate Ce3+ concentration quenching, whereas Tb3+ involves both electric dipole and quadrupole interactions. This analysis provides insights into enhancing luminescent efficiency and suggests NaBaBO3:xCe3+,Tb3+ phosphors' potential in advancing white LED technology, highlighting their stable luminescent properties at low temperatures.

Temperature-dependent photoluminescence of novel Eu3+, Tb3+, and Dy3+ doped LaCa4O(BO3)3: Insights at low and room temperatures

This study explores the structural and optical qualities of LaCa4O(BO3)3 (LACOB) phosphors doped with Eu3+, Dy3+, and Tb3+ using a microwave-assisted sol-gel technique. It uncovers oxygen-related luminescence defects in LACOB, highlighting emission peaks at 489 and 585 nm for Dy3+, a distinct sharp peak at 611 nm for Eu3+ in the red spectrum, and a notable green emission for Tb3+ due to specific transitions. The photoluminescence (PL) analysis indicates that luminescence is optimized through precise doping, leveraging dipole interactions, and localized resonant energy transfer, which are influenced by dopant concentration and spatial configuration. Temperature studies show emission intensity variations, particularly noticeable below 100 K for Tb3+ doped samples, demonstrating the nuanced balance between thermal quenching and luminescence efficiency. This temperature dependency, alongside the identified optimal doping conditions, underscores the potential of these materials for advanced photonic applications, offering insights into their thermal behavior and emission mechanisms under different conditions.

Dispersion-driven cooperativity in alkyl perylenediimide oligomers: insights from densityfunctional theory.

The cooperative mechanism is of paramount importance in the synthesis of supramolecular polymers with desired characteristics, including molecular mass, polydispersity, and morphology. It is primarily driven by the presence of intermolecular interactions, which encompass strong hydrogen bonding, metal-ligand interactions, and dipole-dipole interactions. In this study, we utilize density functional theory and energy decomposition analysis to investigate the cooperative behavior of perylene diimide (PDI) oligomers with alkyl chains at their imide positions, which lack the previously mentioned interactions. Our systematic examination reveals that dispersion interactions originating from the alkyl side-chain substituents play an important role in promoting cooperativity within these PDIs. This influence becomes even more pronounced for alkyl chain lengths beyond hexyl groups. The energy decomposition analysis reveals that the delicate balance between dispersion energy and Pauli repulsion energy is the key driver of cooperative behavior in PDIs. Additionally, we have developed a mathematical model capable of predicting the saturated binding energies for PDI oligomers of varying sizes and alkyl chain lengths. Overall, our findings emphasize the previously undervalued significance of dispersion forces in cooperative supramolecular polymerization, enhancing our overall understanding of the cooperative mechanism.

Adhesive Zwitterionic Poly(ionic liquid) with unprecedented Organic Solvent Resistance.

The resistance of adhesives to organic solvents is of paramount importance in diverse industries. Unfortunately, many currently available adhesives exhibit either weak intermolecular chain interactions, resulting in insufficient resistance to organic solvents, or possess a permanent covalent crosslinked network, impeding recyclability. This study introduces an innovative approach to address this challenge by formulating zwitterionic poly(ionic liquid) (ZPIL) derivatives with robust dipole-dipole interactions, incorporating sulfonic anions and imidazolium cations. Due to its unique dynamic and electrostatic self-crosslinking structure, the ZPIL exhibits significant adhesion to various substrates and demonstrates excellent recyclability even after multiple adhesion tests. Significantly, ZPIL exhibits exceptional adhesion stability across diverse non-polar and polar organic solvents, including ionic liquids, distinguishing itself from non-ionic polymers and conventional poly(ionic liquid)s. Its adhesive performance remains minimally affected even after prolonged exposure to soaking conditions. The study presents a promising solution for the design of highly organic solvent-resistant materials for plastics, coatings, and adhesives. This article is protected by copyright. All rights reserved.

Spin angular momentum-encoded single-photon emitters in a chiral nanoparticle-coupled WSe2 monolayer.

Spin angular momentum (SAM)-encoded single-photon emitters, also known as circularly polarized single photons, are basic building blocks for the advancement of chiral quantum optics and cryptography. Despite substantial efforts such as coupling quantum emitters to grating-like optical metasurfaces and applying intense magnetic fields, it remains challenging to generate circularly polarized single photons from a subwavelength-scale nanostructure in the absence of a magnetic field. Here, we demonstrate single-photon emitters encoded with SAM in a strained WSe2 monolayer coupled with chiral plasmonic gold nanoparticles. Single-photon emissions were observed at the nanoparticle position, exhibiting photon antibunching behavior with a g(2)(0) value of ~0.3 and circular polarization properties with a slight preference for left-circular polarization. Specifically, the measured Stokes parameters confirmed strong circular polarization characteristics, in contrast to emitters coupled with achiral gold nanocubes. Therefore, this work provides potential insights to make SAM-encoded single-photon emitters and understand the interaction of plasmonic dipoles and single photons, facilitating the development of chiral quantum optics.

Anapole source based on electric dipole interactions over a low-index dielectric

Anapole source based on electric dipole interactions over a low-index dielectric

Synthesis and high-frequency magnetoelectric characterization of the 0–3 particulate lead-free multiferroic composite KNN/CFO

The research for lead-free magnetoelectric (ME) multiferroic composite materials has increased considerably because they are environmentally friendly. For composites with 0–3 connectivity, synthesis with lead-free phase has proven challenging to obtain high values of ME coupling. This work reports the successful synthesis of the KNN/CFO composite (K0.5N0.5NbO3/CoFe2O4) by conventional synthesis process. XRD and SEI showed two well-defined, also presenting good electric polarization values. The ME coefficient was very high, reaching values close to 2850 mV cm−1·Oe at the electromechanical resonance frequency. The dipolar interaction between the electric charges and magnetic moments of the KNN and CFO phases was responsible for the high value and the behavior of dependence on the applied magnetic field.

Breakdown of steady-state superradiance in extended driven atomic arrays

Recent advances in generating well controlled dense arrangements of individual atoms in free space have generated interest in understanding how the extended nature of these systems influences superradiance phenomena. Here, we provide an in-depth analysis on how space-dependent light shifts and decay rates induced by dipole-dipole interactions modify the steady-state properties of coherently driven arrays of quantum emitters. We characterize the steady-state phase diagram, with particular focus on the radiative properties in the steady state. Interestingly, we find that diverging from the well-established Dicke paradigm of equal all-to-all interactions significantly modifies the emission properties. In particular, the prominent quadratic scaling of the radiated light intensity with particle number in the steady state—a hallmark of steady-state Dicke superradiance—is entirely suppressed, resulting in only linear scaling with particle number. We show that this breakdown of steady-state superradiance occurs due to the emergence of additional dissipation channels that populate not only superradiant states but also subradiant ones. The additional contribution of subradiant dark states in the dynamics leads to a divergence in the time scales needed to achieve steady states. Building on this, we further show that measurements taken at finite times for extended atom ensembles reveal properties closely mirroring the idealized Dicke scenario. Published by the American Physical Society 2024

Selective Solid–Liquid Extraction of Lithium Cation Using Tripodal Sulfate-Binding Receptors Driven by Electrostatic Interactions

Owing to the important role of and increasing demand for lithium resources, lithium extraction is crucial. The use of molecular extractants is a promising strategy for selective lithium recovery, in which the interaction between lithium and the designed extractant can be manipulated at the molecular level. Herein, we demonstrate that anion receptors of tripodal hexaureas can selectively extract Li2SO4 solids into water containing DMSO (0.8% water) compared to other alkali metal sulfates. The hexaurea receptor with terminal hexyl chains displays the best Li+ extraction selectivity at 2-fold over Na+ and 12.5-fold over K+. The driving force underpinning selective lithium extraction is due to the combined interactions of Li+-SO42− electrostatics and the ion–dipole interaction of the lithium–receptor (carbonyl groups and N atoms); the latter was found to be cation size dependent, as supported by computational calculations. This work indicates that anion binding receptors could drive selective cation extraction, thus providing new insights into the design of receptors for ion recognition and separation.

High-Q plasmonic surface lattice resonance in the ultraviolet region

Surface lattice resonances (SLRs) arise from the long-range dipolar interaction in periodic plasmonic metallic nanostructures and exhibit higher quality factors (Q-factors) compared to plasmon resonances supported in isolated metallic nanostructures. In this Letter, we report a significant improvement in the Q-factor of SLR by a factor of three via modulating the efficiency of a long-range dipolar interaction, which can be achieved by varying the thickness or refractive index of the coating layer on the top of the metallic nanostructures. Under the condition of a weak long-range dipolar interaction, we observe a nascent state of SLR located directly at the Rayleigh cutoff wavelength. Due to the absence of an in-plane diffraction mode at shorter wavelengths, the nascent-SLR dip exhibits an asymmetric shape with a high Q-factor. We experimentally monitor the evolution trend at the onset of the SLR and demonstrate a plasmonic resonance reaching an experimental Q-factor exceeding 100 in the ultraviolet region, outperforming other resonance modes in metallic nanostructures. The reported nascent SLR holds promise for boosting the performance of nano-optic devices.

Tuning Surface Organic Structures by Small Gas Molecules through Catassembly and Coassembly.

The field of molecular assembly has seen remarkable advancements across various domains, such as materials science, nanotechnology, and biomedicine. Small gas molecules serve as pivotal modulators, capable of altering the architecture of assemblies via tuning a spectrum of intermolecular forces including hydrogen bonding, dipole-dipole interactions, and metal coordination. Surface techniques, notably scanning tunneling microscopy and atomic force microscopy, have proven instrumental in dissecting the structural metamorphosis and characteristic features of these assemblies at an unparalleled single-molecule resolution. Recent research has spotlighted two innovative approaches for modulating surface molecular assemblies with the aid of small gas molecules: "catassembly" and "coassembly". This Perspective delves into these methodologies through the lens of varying molecular interaction types. The strategies discussed here for regulating molecular assembly structures using small gas molecules can aid in understanding various complex assembly processes and structures and provide guidance for the further fabrication of complex surface structures.

Entanglement and quantum coherence of two YIG spheres in a hybrid Laguerre–Gaussian cavity optomechanics

We theoretically investigate continuous variable entanglement and macroscopic quantum coherence in the hybrid L–G rotational cavity optomechanical system containing two YIG spheres. In this system, a single L–G cavity mode and both magnon modes (which are due to the collective excitation of spins in two YIG spheres) are coupled through the magnetic dipole interaction whereas the L–G cavity mode can also exchange orbital angular momentum (OAM) with the rotating mirror (RM). We study in detail the effects of various physical parameters like cavity and both magnon detunings, environment temperature, optorotational and magnon coupling strengths on the bipartite entanglement and the macroscopic quantum coherence as well. We also explore parameter regimes to achieve maximum values for both of these quantum correlations. We also observed that the parameters regime for achieving maximum bipartite entanglement is completely different from macroscopic quantum coherence. So, our present study shall provide a method to control various nonclassical quantum correlations of macroscopic objects in the hybrid L–G rotational cavity optomechanical system and have potential applications in quantum sensing, quantum meteorology, and quantum information science.

Fluorinated Poly(thiophene-based aryl piperidinium) Anion-Exchange Membranes Containing Dual Cation–Dipole Interactions for Alkaline Fuel Cells

Fluorinated Poly(thiophene-based aryl piperidinium) Anion-Exchange Membranes Containing Dual Cation–Dipole Interactions for Alkaline Fuel Cells

Enhanced Quantum Control of Individual Ultracold Molecules Using Optical Tweezer Arrays

Control over the quantum states of individual molecules is crucial in the quest to harness their rich internal structure and dipolar interactions for applications in quantum science. In this paper, we develop a toolbox of techniques for the control and readout of individually trapped polar molecules in an array of optical tweezers. Starting with arrays of up to eight Rb and eight Cs atoms, we assemble arrays of RbCs molecules in their rovibrational and hyperfine ground state with an overall efficiency of 48(2)%. We demonstrate global microwave control of multiple rotational states of the molecules and use an auxiliary tweezer array to implement site-resolved addressing and state control. We show how the rotational state of the molecule can be mapped onto the position of Rb atoms and use this capability to readout multiple rotational states in a single experimental run. Further, using a scheme for the midsequence detection of molecule formation errors, we perform rearrangement of assembled molecules to prepare small defect-free arrays. Finally, we discuss a feasible route to scaling to larger arrays of molecules. Published by the American Physical Society 2024

Integrating K+ into Eu and Tb doped GdCa4O(BO3)3: A dual study on photoluminescence and structure

In this study, we investigate the structural and photoluminescence (PL) properties of rare-earth-doped GdCa4O(BO3)3 (GdCOB) phosphors, specifically focusing on the spectral behaviour induced by doping with Eu³⁺ and Tb³⁺ ions. The powder X-ray diffraction (XRD) spectra confirm the formation of a monoclinic phase. The XRD data were also refined by a Rietveld refinement method. The existence of B, O, Ca, Gd, Tb, Eu and K elements was verified by EDS spectra. We introduce a detailed examination of the charge compensation process using Kröger-Vink notation to clarify the mechanisms essential for tailoring the optical properties of the phosphors. The PL excitation spectrum of GdCOB:Eu3+, monitored at 611 nm, reveals sharp excitation peaks at 319, 361, 380, and 392 nm, corresponding to 7F0→5H3, 7F0→5D4, 7F0→7F0, and 7F0→5L6 transitions, respectively. The PL spectrum under excitation of 392 nm exhibits that phosphors doped with Eu3+ a significant red emission at 611 nm, which is attributed to the 5D₀→7F₂ transition. This emission intensity is particularly enhanced at non-centrosymmetric sites of the Eu³⁺ ions. Similarly, the PL excitation spectrum of GdCOB:Tb3+, monitored at 552 nm, displays distinct excitation peaks at 316, 341, 353, and 379 nm, which correspond to the transitions 7F₆→5D₀, 7 F₆→5L₇, 7F₆→5D₂, and 7F₆→5D₃, respectively. Tb³⁺-doped phosphors display a bright green emission, with a dominant peak at 552 nm, resulting from the 5D₄→7F₅ transition. Additionally, the introduction of K⁺ ions as co-dopants results in modifications to the local environments of Eu³⁺ and Tb³⁺ ions. These changes allow for fine-tuning of the emission peaks, significantly enhancing the luminescent output of the phosphors. Optimal doping concentrations of 5 mol% for Eu³⁺ and 1 mol% for Tb³⁺ enhance luminescent intensity and prevent concentration quenching. This phenomenon, often resulting in reduced PL intensity at higher dopant levels, is primarily due to dipole-dipole interactions, consistent with Dexter's theory of energy transfer. Strategic modulation of doping concentrations, coupled with a deep understanding of energy transfer mechanisms are critical for the development of advanced luminescent materials Our analysis of the Commission de l′Eclairage (CIE) chromaticity coordinates reveals enhanced energy transfer dynamics in rare-earth-doped borates, facilitating the tuning of luminescent properties. These results not only deepen our understanding of the fundamental physics governing such phosphors but also open pathways for the development of optoelectronic applications requiring consistent color output, such as LED technologies and solid-state lighting.

The Unprecedented Biodegradable Polyzwitterion: A Removal-Free Patch for Accelerating Infected Diabetic Wound Healing.

Zwitterionic polymers have emerged as an important class of biomaterials to construct wound dressings and antifouling coatings over the past decade due to their excellent hydrophilicity. However, all the reported zwitterionic polymers are non-degradable because of non-cleavable carbon-carbon bonding backbones, and must be removed periodically after treatment to avoid hypoxia in the wound, thus leading to potential secondary injury. In this work, we fabricate a biodegradable polyzwitterion patch for the first time by ring-opening polymerization of carboxybetaine dithiolane (CBDS), which is self-crosslinked via inter-amide hydrogen bonds and zwitterionic dipole-dipole interactions on the side chains. The unprecedented polyCBDS (PCBDS) patch demonstrates enough ductility owing to the intermolecular physical interactions to fully cover irregular wounds, also showing excellent biodegradability and antifouling performance resulted from the existence of disulfide bonds and carboxybetaine groups. Besides, the PCBDS degradation-induced released CBDS owns potent antioxidant and antibacterial activities. This PCBDS patch is used as a diabetic wound dressing, inhibiting bacterial adhesion on the external surface, and its degradation products can exactly kill bacteria and scavenge reactive oxygen species at the wound site to regulate local microenvironment, including regulation of cytokine express and macrophage polarization, accelerating infected diabetic wound repair and also avoiding the potential secondary injury. This article is protected by copyright. All rights reserved.

Ambient N[tbnd]N bond weakening hydrogenation by utilizing the highly defective Cu3BiS3/MnO2 electrocatalyst for ammonia yield above 3 mg/h.cm2: The N2-nano dipole interaction micromechanism

This study introduces a novel Cu3BiS3/MnO2 composite catalyst for the electrochemical nitrogen reduction reaction (eNRR) to address challenges in sustainable ammonia production, aiming to replace the energy-intensive Haber-Bosch process. The ternary Cu3BiS3/MnO2 catalyst exhibited impressive results, achieving a high ammonia yield rate of 3604 µg h−1cm−2 and a significant Faradaic efficiency of 31.4 % at −0.75 V vs. RHE in a 0.5 M Na2SO4 solution, while only 446 µg h−1cm−2 from binary metal CuMn(2:3). This success was attributed to abundant cation and anion defects with multiple valence charges in the Cu3-xBiS3/MnO2-y catalyst, created by introducing the third metal, Bi, into the binary CuMn system. These defects served as trapping centers for dynamic nitrogen molecule activation and facilitated charge transport, enhancing the eNRR process. This study underscores the potential of highly defective Cu3-xBiS3/MnO2-y as an efficient and sustainable catalyst for electrochemical nitrogen fixation, offering a greener approach to ammonia production.

Magnetic Assembly of Magnetite/Perovskite Hybrid Nanorods for Circularly Polarized Luminescence

AbstractMagnetic fields are uniquely valuable for creating colloidal nanostructured materials, not only providing a means for controlled synthesis but also guiding their self‐assembly into distinct superstructures. In this study, a magnetothermal process for synthesizing hybrid nanostructures comprising ferrimagnetic magnetite nanorods coated with fluorescent perovskite nanocrystals is reported and their magnetic assembly into superstructures capable of emitting linear and circularly polarized light are demonstrated. Under UV excitation, the superstructures assembled in a liner magnetic field produce linear polarized luminescence, and those assembled in a chiral magnetic field exhibit strong circularly polarized luminescence (CPL) with a glum value up to 0.44 (±0.004). The CPL is believed to originate from the dipolar interaction between neighboring perovskite nanocrystals attached to the chiral assemblies and the chiral‐selective absorption of the perovskite emission by the magnetite phase. The magnetic synthesis and assembly approaches and the resulting distinctive chiral superstructures are anticipated to open up new avenues for designing diverse functional chiroptical devices.

Determination of Binding Constants for the Complexes Between Heavy Metal Ions and Cucurbit[n]uril

AbstractOne of the major concerns worldwide is the rapid increase in water pollution with hazardous heavy metals. The Cucurbit[n]uril (CB[n]) structure provides an inner hydrophobic cavity accessible through two electrostatically negative portals with polar carbonyl groups, allowing for charged ion–dipole interaction between cationic species with excellent binding affinities. In this work we selected CB[5], and CB[7] for the titrimetric and electrochemical evaluation of the heavy metal complexes formed with Copper(II), Cadmium(II) and Lead(II). The host–guest interaction was found by either attenuation of the redox peaks, the formation of a new peak, or the slight shift in the redox peaks of the heavy metal ions. Titration data were obtained for CB[n] with the heavy metal solutions to determine the molar coefficient of binding. The stoichiometry of the complexes was 1 : 1 by Job′s plot. We calculated the binding constants using the Benesi–Hildebrand method achieving relatively good binding constants (K) ranging from (1.80±0.14)×105–(4.98±0.13)×105 M−1. The results showed that the complexes of Cadmium(II) and Lead(II) with both CB[5] and CB[7] are highly stable in aqueous media. Copper(II) was able to bind to the smaller sized portal of CB[5], whereas with CB[7] the heavy metal ion could not form a favourable complex. This phenomenon suggests that the CB[5] is an ideal host at forming stable host–guest interactions than their larger homologue.