Diphenoquinone Research Articles

Catalytic activity of CuI/CuII cyanide based phenanthroline-bicarbonate system for enhancing aerobic oxidation of 2,6-di-tert-butylphenol

The metal organic framework {[Cu2(CN)3(phen)3]5H2O} MOF1- bicarbonate system was investigated as an efficient catalyst for aerobic oxidation of 2, 6-di-tert-butylphenol (2,6- DTBP). The catalytic system showed very efficient catalytic behavior for the oxidation of selective coupling of 2,6- DTBP to 3,3′,5,5′-tetra-tert-butyl-4,4′-diphenoquinone (DPQ) in excellent yield. The influence of reaction parameters on the selective oxidation of 2, 6-DTBP to DPQ had been investigated. Photoluminescence probing technology of Disodium salt of terephthalic acid as well as scavenging experiments revealed the creation of the hydroxyl radicals as the main active oxidation radicals produced by the MOF1/O2/basic bicarbonate system. The oxidation reaction mechanism was also discussed. The recycled catalytic system retained its activity for eight successive runs.

Colorimetric determination of cysteine based on Au@Pt nanoparticles as oxidase mimetics with enhanced selectivity.

A H2O2-free colorimetric protocol based on urchin-like Au@Pt nanoparticles (Au@Pt NPs) has been developedfor the sensitive and selective determination of cysteine (Cys). We verified the intrinsic oxidase-like activity of the Au@Pt NPs. They can act as artificial mimic oxidases to catalyse the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) with the assistance of dissolved oxygen, avoiding the use of H2O2 in the colorimetric determination of Cys. In addition, the discrimination of Cys from the other two biothiol analogues, homocysteine and glutathione, can be easily realized through a simple ageing process. HNO3 is added to this colorimetric system to terminate the reaction by oxidizing ox-TMB (oxidized form of TMB) to diphenoquinone (DPQ), thus generatinga characteristic absorption peak of DPQ at 450nm. By recording the absorbance at 450nm, interference from the aggregated Au@Pt NPs (absorption peak at 670nm) when 650nm (the characteristic absorption peak of ox-TMB) is used as the absorption wavelength can be eliminated. We investigated this H2O2-free colorimetric protocol and obtained high sensitivity, with a detection limit of 1.5nM and relatively high selectivity. The analytical performance for real samples was further explored. The Au@Pt NP-based H2O2-free colorimetric protocol is of great significance for the sensitive and selective determination of Cys in practical samples in different scenarios.

Insights into N-Heterocyclic Carbene-Catalyzed Oxidative α-C(sp3)-H Activation of Aliphatic Aldehydes and Cascade [2 + 2] Cycloaddition with Ketimines.

Predicting the chemoselectivity of [2 + 2] cyclizations is an important challenge in organic chemistry. Herein, we provided a valuable case for this issue. Density functional theory calculations were performed to systematically study the possible mechanisms and origin of selectivities for the N-heterocyclic carbene (NHC)-catalyzed oxidative α-C(sp3)-H activation of aliphatic aldehydes and the cascade [2 + 2] cycloaddition with ketimines. The [2 + 2] cycloaddition of azolium enolate intermediates to the C═N bond, rather than the C═O bond of ketimine, is revealed to be determined by chemo- and stereoselectivity. By comparing the energy gap between the frontier molecular orbitals (FMOs) of the two reacting parts involved in the [2 + 2] cycloaddition transition states, we propose a new strategy to determine the origin of the reaction chemoselectivity. Moreover, the local nucleophilic index can efficiently predict the active site of ketimines. Further analyses illustrate that NHC can increase the nucleophilicity of aldehydes and the acidity of the α-C(sp3)-H bond, and 3,3',5,5'-tetra- tert-butyl diphenoquinone (DQ) acts as an oxidant and promotes α-C(sp3)-H bond deprotonation. This work is useful not only for understanding the NHC-catalyzed oxidative [2 + 2] annulation but also for developing new applications of the FMO theory in organocatalytic cyclizations.

Oxidation of 2,6-di-tert-butylphenol with tert-butyl hydroperoxide catalyzed by iron porphyrin tetrasulfonate, iron porphyrin tetracarboxylate and their supported analogues in a water-methanol mixture.

In this study, two water-soluble iron porphyrins bearing sulfonate and carboxylate functionalities (FePTS and FePTC, respectively) and their supported analogues were used as catalysts for the oxidation of 2,6-di-tert-butylphenol (DTBP) in a water-methanol mixture. tert-Butyl hydroperoxide (TBHP) was the oxidant and the volume ratio of water to methanol in the mixture was 1-8. The major products of the DTBP oxidation were 3,3',5,5'-tetra-tert-butyl-4,4'-diphenoquinone (DPQ) and 4,4'-dihydroxy-3,3',5,5'-tetra-tert- butylbiphenyl (H2DPQ). Also 2,6-di-tert-butyl-1,4-benzoquinone (BQ) was the minor product of the oxidation. The results showed that FePTC was more catalytically active than FePTS in the oxidation and gave the highest TON and TOF values in comparison to those for metalloporphyrin and metallophthalocyanine based catalysts in the DTBP oxidation given in the literature. In addition, the ecotoxicity tests of the DTBP oxidation mixtures before and after oxidative catalytic treatment toward Artemia salina were performed. It was found that the toxicity of the catalytically treated DTBP mixture containing residual DTBP and products was lower than the catalytically untreated DTBP mixture.

Insights into the N-Heterocyclic Carbene (NHC)-Catalyzed Oxidative γ-C(sp3)-H Deprotonation of Alkylenals and Cascade [4 + 2] Cycloaddition with Alkenylisoxazoles.

The N-heterocyclic carbene (NHC)-catalyzed oxidative C-H deprotonations have attracted increasing attention; however, the general mechanism regarding this kind of oxidative organocatalysis remains unclear. In this paper, the competing mechanisms and origin of the stereoselectivity of the NHC-catalyzed oxidative γ-C(sp3)-H deprotonation of alkylenals and cascade [4 + 2] cycloaddition with alkenylisoxazoles were systematically investigated for the first time using density functional theory (DFT). The computed results indicate that the oxidation of the Breslow intermediate by 3,3',5,5'-tetra- tert-butyl diphenoquinone (DQ) via a hydride transfer to oxygen (HTO) pathway is the most favorable among the four competing pathways. In addition, the analyses demonstrate that oxidant DQ plays a double role, i.e., strengthening the acidity of the hydrogen of the γ-carbon of alkylenal and forming π···π interactions with conjugated C═C bonds to promote the γ-C(sp3)-H deprotonation. The NHC catalyst acts as a Lewis base, and the hydrogen-bond network between the NHC and the substrate formed in the key Michael addition step is responsible for the origin of the stereoselectivity. Further DFT calculations reveal that the nonpolar solvent can stabilize the nonpolar R isomer but destabilize the polar S isomer for the stereoselectivity-determining transition states, thus improving the stereoselectivity.

A Highly Efficient Aromatic Amine Ligand/Copper(I) Chloride Catalyst System for the Synthesis of Poly(2,6-dimethyl-1,4-phenylene ether).

Highly active catalyst systems for polymerizing 2,6-dimethylphenol were studied by using aromatic amine ligands and copper(I) chloride. The aromatic amine ligands employed were pyridine, 1-methylimidazole, 2-aminopyridine, 3-aminopyridine, and 4-aminopyridine. A mixture of chloroform and methanol (9:1, v/v) was used as a polymerization solvent. All experiments were performed with oxygen uptake measurement apparatus, while the reaction rate for each aromatic amine ligand-Cu catalyst system and the amount of by-product, 3,3′,5,5′-Tetramethyl-4,4′diphenoquinone (DPQ), were measured to determine the efficiency of the catalyst systems. The 4-aminopyridine/Cu (I) catalyst system was found to be extremely efficient in poly(2,6-dimethyl-1,4-phenylene ether) (PPE) synthesis; it had the fastest reaction rate of 6.98 × 10−4 mol/L·s and the lowest DPQ production. The relatively high basicity of 4-aminopyridne and the less steric hindrance arising from a coordination of Cu and 4-aminopyridine in this catalyst are responsible for the fast polymerization rate. When 2-aminoprydine (an isomer of 4-aminopyridine) was used as a ligand, however, no polymerization occurred probably due to steric hindrance.

Catalytic way of transforming 2,3-dimethylphenol to para-quinone with the use of vanadium-containing heteropoly acids

2,3-Dimethyl-p-benzoquinone (2,3-Me2BQ) is a valuable chemical that is applied as a soft oxidizing and dehydrogenating agent and also as a synthon in preparing different complex products including pharmaceutical and biochemical substances. Keggin- and modified-type aqueous solutions of Mo-V-phosphoric heteropoly acids (Mo-V-P HPAs) with the gross compositions H3+xPMo12-xVxO40 (HPA-x) and HaPzMoyVx’Ob (HPA-x’), respectively, possessing high oxidation potential and simplicity of regeneration can serve as effective soft oxidants for obtaining such para-quinone from 2,3-dimethylphenol (2,3-Me2P). The synthesized HPA catalysts with different vanadium content were characterized by a number of analysis techniques, such as 31P and 51V NMR spectroscopy, potentiometry, titrimetry, and pH measurement. It was found that the predominant formation of 2,3-Me2BQ instead of corresponding diphenoquinone (DPQ) at one-electron oxidation is achieved by a consecutive optimization of reaction conditions, the most important among them being organic solvent and molar ratio of vanadium(V) to substrate. As was shown, the substitution of HPA-x by HPA-x’ allows one to increase the quinone selectivity and to decrease the optimal molar ratio of vanadium(V) to substrate. The highest yield of the desired quinone (97%) at total substrate conversion was obtained by using the biphasic water-benzene system at molar vanadium(V) to substrate ratio of 12. The temperature of 50°C and an inert atmosphere were established to be the optimal reaction conditions. The aqueous HPA-10′ solution including the highest content of VO2+ ions proved to be the most efficient catalyst among investigated HPAs. Carrying out catalyst regeneration at a separate stage provides the preservation of its activity and selectivity at the initial level for at least ten cycles.

3,3′,5,5′-Tetra-tert-butyl-4,4′-diphenoquinone (DPQ)-Air as a New Organic Photocatalytic System: Use in the Oxidative Photocyclization of Stilbenes to Phenacenes

We report an organic photocatalytic system, namely 3,3′,5,5′-tetra-tert-butyl-4,4′-diphenoquinone (DPQ) and air, capable of coupling efficiently with the photocyclization of stilbenes to afford phenacenes. The potential of this new and mild process is shown with the synthesis of [5]- and [7]phenacene, two semiconductors recently implemented into organic electronic devices, with high yields and remarkable purity.

Caveolin-1 facilitates internalization and degradation of ABCA1 and probucol oxidative products interfere with this reaction to increase HDL biogenesis

Background and aimsExpression of ATP binding cassette transporter (ABC) A1, a key membrane protein for biogenesis of high-density lipoprotein (HDL), is regulated not only by its gene transcription but also by its intracellular degradation to modulate plasma HDL concentration. We previously showed that inhibition of ABCA1 degradation by probucol oxidative products, spiroquinone (SQ) and diphenoquinone (DQ), increased HDL biogenesis and reverse cholesterol transport, and achieved reduction of atherosclerosis in animal models. The background mechanism has thus been investigated. MethodsInvolvement of caveolin-1, a protein of multiple functions in cell biology, particularly in cholesterol trafficking, has been examined for its roles in ABCA1 degradation as well as the effects of SQ and DQ on the reaction. ResultsABCA1 protein was increased in caveolin-1-deficient mouse embryonic fibroblasts, not by increase of transcription but by decrease in its internalization and degradation. Transfection and expression of caveolin-1 normalized the protein level and the rate of degradation of ABCA1. Immunoprecipitation experiments demonstrated association between ABCA1 and caveolin-1 and SQ and DQ disrupted this interaction. The effects of SQ and DQ to increase ABCA1 and cell cholesterol release induced by apolipoprotein A-I were dependent on expression of caveolin-1. Fluorescence imaging of ABCA1 and caveolin-1 in cultured cells demonstrated their co-localization as well as its disruption by SQ and DQ, being consistent with the biochemical findings. ConclusionsCaveolin-1 enhances internalization and degradation of ABCA1 by its association with ABCA1. Interference of this interaction by probucol oxidative products suppresses ABCA1 degradation and increase HDL biogenesis.

Synthesis and Characterization of Novel <i>μ</i>-Carbonato Tetranuclear Copper Complexes [(Pip)<sub>4n</sub>Cu<sub>4</sub>X<sub>4</sub>(CO<sub>3</sub>)<sub>2</sub>] in Aprotic Media

In this work, novel oxidative coupling complexes, [(Pip)4nCu4X4(CO3)2] (n = 1 or 2, X = Cl or Br, Pip = piperidine), are synthesized from the reaction of well characterized Lewis base [(Pip)4nCu4X4O2] with carbon dioxide as a Lewis acid in CH2Cl2. These carbonato-derivatives are isolated as stable solids. They are easily soluble in aprotic solvents as CH2Cl2or phNO2. Cryoscopic measurements support tetranuclear structure for all of them. Electronic spectra in the near infrared with high molecular absorptivity may be explained for tetranuclear cuban structure to fulfil 3 halo-ligands for each copper centre in [(Pip)4nCu4X4(CO3)2]. The EPR spectra for [(Pip)4nCu4X4(CO3)2] complexes are axial type of spectra (dx2-y2 G.S) suggesting elongated tetragonal distortion for all of them. Cyclic voltammograms for [(Pip)4nCu4X4(CO3)2] are irreversible in character. These tetranuclear carbonato complexes show catalytical activity. They initiate the oxidation of 2,6-dimethylphenol (DMP) to 3,3’,5,5’-tetramethyl-4,4’-diphenoquinone (DPQ).

Kinetics of Oxidation of 2,6-Dimethylphenol (DMP) Using Novel μ-Carbonato [(Pip)<sub>4n</sub>Cu<sub>4</sub>X<sub>4</sub>(CO<sub>3</sub>)<sub>2</sub>] Complexes

This paper reports the kinetics of the oxidation of 2,6-dimethylphenol (DMP) to get 3,3’,5,5’-tetra- methyl-4,4’-diphenoquinone (DPQ) using novel oxidative coupling complexes [(Pip)4nCu4X4-(CO3)2] (n = 1 or 2, X = Cl or Br, Pip = piperidine). The new prepared tetranuclear complexes were characterized using cryoscopic measurements, electronic spectra, FTIR, EPR and cyclic voltammetry techniques. These complexes are catalytically active. The proposed mechanism of the catalytic oxidative coupling can be illustrated as a pre-equilibrium, K, between the catalyst and DMP to form a complex intermediate which is converted to activated complex through the rate determining step, k2, to form the final product. The inverse of the observed rate constants kobsd versus 1/[DMP]2 gives a straight line with intercept. From the slope and the intercept, both K and k2 are obtained. At different temperatures, thermodynamic and kinetic parameters are evaluated. It is worth to mention that, the dependence of kobsd on [DMP]2 indicates that the coordination number for every copper center in both n = 1 or 2 in [(Pip)4nCu4X4(CO3)2] is equal to six. Therefore, carbonato bridging centers in n = 1 acts as a tridentate ligand, while for n = 2 acts as a bidentate ligand.

중합촉매 시스템이 폴리페닐렌에테르의 합성에 미치는 영향

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) was synthesized using or CuCl catalyst with various amounts of ligand and base in several different solvent systems. CuCl/1-methylimidazole/ammonium hydroxide was found to be an effective catalyst system which showed the highest polymer yield and molecular weight. The effects of catalyst/monomer ratio, different amine ligands, and the content of mono-functional reagent 2,4,6-trimethylphenol (TMP) additive on the polymer yield and molecular weight were investigated. Among the co-solvent systems used in this polymerization, chloroform/methanol 9/1(v/v) gave the highest polymer yield and molecular weight ( 55 K, 92 K, PDI 1.7). The catalytic activity between CuCl and CuI was compared by oxygen-uptake experiments and the formation of sideproduct, 5,5'-tetramethyl-4,4'-diphenoquinone (DPQ), was analyzed by ultraviolet spectroscopy.

Metal complexes catalyzed oxidative coupling of 2,6-dimethylphenol in micellar media

The oxidative coupling reaction of 2,6-dimethylphenol (DMP) with H 2O 2 catalyzed by two copper(II) complexes (2,2′-dipyridylamine copper(II), L 1Cu and N,N′-bis (2-pyridinecarbonyl) ethylenediamine copper(II), L 2Cu) in cationic surfactant cetyl trimethylammonium bromide (CTAB), gemini surfactants ethanediyl-1,2-bis(dodecyldimethylammonium bromide) (12-2-12), dimethylene-1,2-bis(cetyltrimethylammonium bromide) (16-2-16), anionic surfactant sodium dodecyl benzene sulfornate (SDBS) and nonionic surfactant Triton X-100 (TX-100) micellar media were comparatively investigated at 25 °C. The kinetics of formation of 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone (DPQ) was studied. The kinetic parameters k 2 and K m were obtained at pH 7.01. L 1Cu displayed better catalytic activity than L 2Cu in mentioned above systems. For L 1Cu catalyzed systems, the cationic surfactant CTAB, 12-2-12 and 16-2-16 micellar media accelerated the oxidation of DMP. And the TX-100 and SDBS micelles showed little effect on reaction rate compared with the buffer solution. For the L 2Cu catalyzed systems, these surfactants all inhibited the oxidation of DMP, and especially, the oxidation of DMP was not found in SDBS micellar solution in the catalyzed system at pH 7.01 and 25 °C. Micelles showed great influence on the yield of product and the selectivity of PPO. Under this work's conditions, DPQ was easily generated in aqueous solution, while PPO was remarkably promoted in micellar media, especially in SDBS micellar solution. As a green technology process, one outstanding advantage of this catalyzed system was that the products of polymer can be easily separated from the solution and the catalysts still remain in the micellar solution.

Pharmacological inhibition of ABCA1 degradation increases HDL biogenesis and exhibits antiatherogenesis

Expression of ABCA1 is regulated by transcription of the gene and calpain-mediated proteolytic degradation, and inhibition ABCA1 degradation results in increased ABCA1 and HDL biogenesis in vitro. We examined whether this approach could be a potential antiatherogenic treatment. Although probucol inhibits both the activity and degradation of ABCA1, its oxidized products, spiroquinone and diphenoquinone, reduce degradation of ABCA1 without inhibiting its activity or altering transcription of the ABCA1 gene. Accordingly, both compounds enhanced apolipoprotein A-I/ABCA1-dependent generation of HDL in vitro, and increased hepatic ABCA1 and plasma HDL without increasing antioxidant activity in plasma when given to rabbits. Both compounds also decreased vascular lipid deposition in cholesterol-fed rabbits. We therefore conclude that stabilization of ABCA1 against calpain-mediated degradation is a novel and potentially important strategy to increase HDL formation and prevent atherosclerosis. Spiroquinone and diphenoquinone are potential seeds for development of such drugs.

Homogeneous oxidative coupling catalysts: stoichiometry, characterization and kinetics of [(diamine)(μ-halo)copper(I)]2 oxidation by dioxygen in aprotic solvent

Copper(I) halides dissolve in deoxygenated methylene chloride and nitrobenzene solutions of equimolar N,N,N′-triethylethylenediamine (TriEED) to give air-sensitive colorless or pale yellow copper(I) dimers [(TriEED)(μ-X)Cu]2, X = Cl, Br or I. Dioxygen uptake, analytical, cryoscopic and spectral data show that copper(I) dimers are oxidized to μ-oxo complexes, [(TriEED)2(μ-X)2(μ-O)Cu2], which react with carbon dioxide to form μ-carbonato analogues, [(TriEED)2X2(μ-CO3)Cu2]. Both oxo and carbonato complexes are homogeneous oxidative coupling catalysts for oxidation of 2,6-dimethylphenol to mixture of diphenoquinone (DPQ) and polyphenyleneoxide (PPO). Kinetic data for oxidation of [(TriEED)(μ-X)Cu]2 by dioxygen in nitrobenzene obey the third-order rate law d[[(TriEED)2(μ-X)2(μ-O)Cu2]]/dt = k D[[(TriEED)(μ-X)Cu]2]2[O2]. Comparison of the kinetic data with data for oxidation of [(TEED)(μ-Br)Cu]2, TEED = N,N,N′,N′-tetraethylethylenediamine (the fully alkylated diamine), by dioxygen indicate that N–H in (TriEED) speeds the reaction by a factor of 220 due to an intermolecular attractive force between N–H of (TriEED) and the incoming dioxygen, helping to assemble the activated complex.

Catalyzed oxidation of 2,6-dimethylphenol in Triton X-100 micellar solution

The oxidative coupling reaction of 2,6-dimethylphenol with H 2O 2 catalyzed by a copper(II) Schiff complex in aqueous and Triton X-100 micellar solution under mild conditions was investigated. The kinetics of formation of 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone (DPQ) was studied. Rate constant k 2 were obtained. The optimum pH for DPQ generation reaction is 7.25. The main product was DPQ in aqueous buffer solution, but PPE and the oxidized products of PPE remained in Triton X-100 micellar solution.

Catalytic applications of Cu II-containing MOFs based on N-heterocyclic ligand in the oxidative coupling of 2,6-dimethylphenol

Two Cu II complexes bearing a N-heterocyclic ligand, namely [Cu(SO 4)(pbbm)] n ( 1) and {[Cu(Ac) 2(pbbm)] · CH 3OH} n ( 2) (pbbm = 1,1′-(1,5-pentanediyl)bis-1 H-benzimidazole) have been synthesized with the aim of exploiting new and potent catalysts. Single crystal X-ray diffraction shows that new polymeric complex 1 features 1-D double-chain framework. The catalytic studies on 1 and 2 indicate that they are efficient homogeneous catalysts for the oxidative coupling of 2,6-dimethylphenol (DMP) to poly(1,4-phenylene ether) (PPE) and diphenoquinone (DPQ) with H 2O 2 as oxidant and NaOMe as co-catalyst at room temperature. Optimal reaction conditions are obtained by examining the effects of solvent, the reaction time, temperature as well as the amounts of co-catalyst, catalyst and oxidant. Under the optimal conditions, the selectivity to PPE is almost up to 90% for both complexes, and the conversion of DMP is 85% for 1 and 90% for 2, comparable to those observed for highly active catalyst systems in the literature. Further comparison of their catalytic performances with those of the corresponding copper salt together with organic ligand, copper salt alone and free ligand reveals that the coordination of ligand to Cu II ion plays a key role in generating the superior reactivities of complexes.

Oxidation of 2,6-di- tert-butylphenol with tert-butyl hydroperoxide catalyzed by iron phthalocyanine tetrasulfonate in a methanol–water mixture

The oxidation of 2,6-di- tert-butylphenol (DTBP) with tert-butyl hydroperoxide (Bu t OOH) catalyzed by iron phthalocyanine tetrasulfonate ([FePcTS]) in a 8-to-1 methanol–water mixture resulted with about 70–80% conversion of DTBP in 3 min at ambient temperature. The mole ratios of [FePcTS]:DTBP:Bu t OOH in a typical reaction were 1:400:500, respectively. The major products of the catalysis are the coupled products, namely 3,3′,5,5′-tetra- tert-butyl-4,4′-diphenoquinone (DPQ) and 4,4′-dihydroxy-3,3′,5,5′-tetra- tert-butylbiphenyl (H 2DPQ). In addition, the effect of DTBP on the monomer–dimer equilibrium of [FePcTS] and catalytically active [FePcTS] species are discussed.

Probucol Protects against Hypochlorite-induced Endothelial Dysfunction: IDENTIFICATION OF A NOVEL PATHWAY OF PROBUCOL OXIDATION TO A BIOLOGICALLY ACTIVE INTERMEDIATE

Atherosclerosis is associated with endothelial dysfunction and a heightened state of inflammation characterized, in part, by an increase in vascular myeloperoxidase and proteins modified by its principal oxidant, hypochlorous acid (HOCl). Here we examined whether probucol could protect against endothelial dysfunction induced by the two-electron oxidant HOCl. Hypochlorous acid eliminated endothelium-dependent relaxation of rabbit aorta, whereas endothelial function and tissue cGMP was preserved and elevated, respectively, in animals pretreated with probucol. Exogenously added probucol also protected against HOCl-induced endothelial dysfunction. In vitro, HOCl oxidized probucol in a two-phase process with rate constants k(1) = 2.7 +/- 0.3 x 10(2) and k(2) = 0.7 +/- 0.2 x 10(2) m(-1) s(-1) that resulted in a dose- and time-dependent accumulation of probucol-derived disulfoxide, 4,4'-dithiobis(2,6-di-tert-butyl-phenol) (DTBP), DTBP-derived thiosulfonate, disulfone, and sulfonic acid, together with 3,3',5,5'-tetra-tert-butyl-4,4'-diphenoquinone (DPQ) as determined by high performance liquid chromatography and mass spectrometry. Like HOCl, selected one-electron oxidants converted probucol into DTBP and DPQ. Also, dietary and in vitro added DTBP protected aortic rings from HOCl-induced endothelial dysfunction and in vitro oxidation by HOCl gave rise to the thiosulfonate, disulfone, and sulfonic acid intermediates and DPQ. However, the product profiles of the in vitro oxidation systems were different from those in aortas of rabbits receiving dietary probucol or DTBP +/- HOCl treatment. Together, the results show that both probucol and DTBP react with HOCl and protect against HOCl-induced endothelial dysfunction, although direct scavenging of HOCl is unlikely to be responsible for the vascular protection by the two compounds.

Oxidation of 2,6-di- tert-butylphenol with tert-butylhydroperoxide catalyzed by cobalt(II) phthalocyanine tetrasulfonate in a methanol–water mixture and formation of an unusual product 4,4′-dihydroxy-3,3′,5,5′-tetra- tert-butylbiphenyl

The oxidation of 2,6-di- tert-butylphenol (DTBP) with tert-butylhydroperoxide (Bu t OOH) catalyzed by cobalt(II) phthalocyanine tetrasulfonate ([CoPcTS] 4−) in a 4:1 methanol–water mixture gave predominantly the coupled products 3,3′,5,5′-tetra- tert-butyl-4,4′-diphenoquinone (DPQ) and 4,4′-dihydroxy-3,3′,5,5′-tetra- tert-butylbiphenyl (H 2DPQ) when the oxidant/substrate ratio was less than 10. The conversion of DTBP was 70% in 3 h and 86% in 8 h when the amounts of DTBP, Bu t OOH, and [CoPcTS] 4− in millimoles were 0.300, 1.52, and 3.0 × 10 −3, respectively. The yield of DPQ was 56% in 3 h and 73% in 8 h whereas that of H 2DPQ was about 14% in 3 and 8 h. H 2DPQ is not commonly encountered the oxidation product of DTBP and is considered unstable. When the oxidant/substrate ratio was over 10, 2,6-di- tert-butylbenzoquinone was also formed. The degradation of [CoPcTS] 4− by Bu t OOH also occurred during the oxidation of DTBP. About three-fourths of the catalyst was degraded in the first hour and about 2% of the catalyst remained after 8 h.