Dinuclear Gold Complexes Research Articles

New dinuclear gold(III) complex with 1,5-naphthyridine as bridging ligand: synthesis, characterization, DNA/BSA binding studies, and anticancer activity

New dinuclear gold(III) complex with 1,5-naphthyridine as bridging ligand: synthesis, characterization, DNA/BSA binding studies, and anticancer activity

Manipulation of aurophilicity in constructed clusters of gold(I) complexes with boosted luminescence and smart responsiveness

High-performance luminescent gold(I) complexes have attracted considerable attention due to their potential applications in various fields, but their construction is a significantly challenging task. Herein, we designed and synthesized a series of novel dinuclear gold(I) complexes 1–4 based on 1,2-bis(diphenylphosphino)benzene and 1,4-bis(diphenylphosphino)benzene frameworks, where para-substitutions of benzene ring were employed for comparison and bulky t-butyl groups were introduced into carbazole ligands to assist flexibly regulating the aurophilicity. Among them, the structure of complex 1 was confirmed by single-crystal X-ray diffraction, and all the complexes exhibited typical aggregation-induced emission characteristics. Due to the construction of intramolecular aurophilicity and the formation of molecular clusters, noticeable enhancement of the luminescent efficiency was achieved for the core complex 1. Together with the introduction of flexible t-butyl groups, good responsiveness towards external mechanical force and solvent vapors were also realized. Moreover, the specific bioimaging ability of complex 1 towards cancer cells was demonstrated. Thus, this work presents the crucial capability of aurophilic manipulation in tuning the luminescence and smart behaviors of gold complexes, and it will open a new route to developing high-performance luminescent materials.

Front Cover: Ferrocenyl Dinuclear Gold(I) Complexes. Study of their Structural Features and the Influence of Bridging and Phosphane Ligands in a Catalytic Cyclization Reaction (Chem. Eur. J. 10/2024)

Front Cover: Ferrocenyl Dinuclear Gold(I) Complexes. Study of their Structural Features and the Influence of Bridging and Phosphane Ligands in a Catalytic Cyclization Reaction (Chem. Eur. J. 10/2024)

Ferrocenyl Dinuclear Gold(I) Complexes. Study of their Structural Features and the Influence of Bridging and Phosphane Ligands in a Catalytic Cyclization Reaction.

Invited for the cover of this issue are the groups of Raquel P. Herrera and M. Concepción Gimeno at the Instituto de Síntesis Química y Catálisis Homogénea (University of Zaragoza-CSIC). The image depicts the light of the full moon illuminating a bridge between the gold(I) metal centers. Two dragons, symbolizing the use of bridging ligands, confront each other to determine the ultimate victor. Read the full text of the article at 10.1002/chem.202303585.

Ferrocenyl Dinuclear Gold(I) Complexes. Study of their Structural Features and the Influence of Bridging and Phosphane Ligands in a Catalytic Cyclization Reaction.

The combination of the ferrocene moiety with gold(I) catalysis remains a relatively unexplored field. In this article, we delve into the synthesis, characterization, and potential catalytic activity of four complexes utilizing both monodentate and bidentate ferrocenyl diphenylphosphane ligands (ppf and dppf), coordinated with two gold(I) metal centers, linked by either chloride or pentafluorophenylthiolate bridging ligands. This leads to the formation of cationic "self-activated" precatalysts capable of initiating the catalytic cycle without the need for external additives. The catalytic activity of these complexes was assessed through a model reaction in gold(I) catalysis, specifically the cyclization of a N-propargylbenzamide to produce an oxazole. In addition, we studied and compared the influence exerted by both the phosphane and the bridging ligand on the performance of these catalysts.

Dinuclear gold(I) pseudohalogen complexes bridged by a ferrocenyl bisphosphine ligand: synthesis, structure, and reactivity toward isothiocyanate

Ferrocenyl bisphosphine-bridged dinuclear gold(I) complexes containing CF3COO as a pseudohalogen ligand were synthesized from the corresponding halides using CF3COOAg. The sequential treatment of gold(I) trifluoroacetates with aqueous NaN3 afforded the corresponding ferrocenyl bisphosphine-bridged dinuclear gold(I) azides. Isolated gold(I) pseudohalogen complexes were characterized through IR, NMR and X-ray crystallography. The characteristic IR absorption bands of ν(CO), ν(CF), and ν(N3) were at 1690, 1190, and 2040 cm−1, respectively, corresponding to the gold(I) trifluoroacetates and azides, verifying gold(I) pseudohalogen formation. The molecular structure of [Au2(η1-CF3CO2)2(µ-dippf)] (dippf = 1,1’-bis(diisopropylphosphino)ferrocene) through X-ray diffraction showed intermolecular Au⋅⋅⋅Au interactions with close contacts between molecules. The crystallographic images illustrate the polymeric chain of bis(phosphino)ferrocenyl gold(I) formed via intermolecular Au⋅⋅⋅Au bonds and layered packing arrays. In contrast, the molecular structures of [Au2(η1-CF3CO2)2(µ-dtbpf)] (dtbpf = 1,1’-bis(di-tert-butylphosphino)ferrocene) and Au2(N3)2(µ-dippf) showed intramolecular Au⋅⋅⋅Au aurophilic interactions, but the structures of [Au2(η1-CF3CO2)2(µ-dcpf)] (dcpf = 1,1′-bis(dicyclohexylphosphino)ferrocene) and Au2(N3)2(µ-dppf) revealed no direct interaction within the dinuclear gold(I) system. Gold(I) azides gradually react with isothiocyanates (allyl, (S)-(+)-1-phenylethyl, and benzyl) to afford the corresponding gold(I) tetrazole-thiolates [Au2X2(µ-dippf)] or [Au2X2(µ-dtbpf)] (X = S[CN4(Y)]) (Y = allyl, (S)-(+)-1-phenylethyl, and benzyl) via dipolar cycloaddition of the isothiocyanates into the Au-N3 bond.

Unlocking the catalytic potential of gold(II) complexes: a comprehensive reassessment.

Gold(II) complexes, unlike their gold(I) and gold(III) counterparts, have been sparsely employed in the field of catalysis. This is primarily due to the challenges associated with isolating and characterising these open-shell species. However, these complexes offer a wide range of possibilities. On one hand, this intermediate oxidation state has proven to be more easily accessible through reduction and oxidation processes compared to the gold(I)/gold(III) redox couple, thereby facilitating potential homo-coupling and cross-coupling reactions. On the other hand, gold(II) exhibits Lewis acid behaviour, bridging the characteristics of the soft acid gold(I) and the hard acid gold(III). In this review, we focus on mono- and dinuclear gold(II) complexes, whether they are isolated and well-studied or proposed as intermediates in cross-coupling reactions induced by the action of oxidants or light. We delve into the unique reactivity and potential applications of these gold(II) species, shedding light on their role in this field. This comprehensive exploration aims to underscore the latent promise of gold(II) complexes in catalysis, offering insights into their structural and mechanistic aspects while highlighting their relevance in contemporary chemical transformations.

Dinuclear gold(i) complexes with pyrimidine- and m-carborane-based bisphosphine ligands: synthesis, structure, photoluminescence and cytotoxicity against malignant pleural mesothelioma

Novel luminescent and anticancer dinuclear Au(i) complexes with bisphosphine ligands have been synthesized and studied.

Potent Anticancer Activity of a Dinuclear Gold(I) bis-N-Heterocyclic Imine Complex Related to Thioredoxin Reductase Inhibition in Vitro.

A dinuclear gold(I) complex featuring a strongly donating bis-N-heterocyclic imine ligand was synthesised and characterised by different methods, including single crystal X-ray diffraction (SC-XRD) analysis. The compound has been tested for its antiproliferative effects in a panel of human cancer cell lines in vitro, showing highly selective anticancer effects, particularly against human A549 non-small cell lung cancer cells (NSCLC), with respect to non-tumorigenic cells (VERO). The accumulation of the compound in A549 and VERO cells was studied by high-resolution continuum source atomic absorption spectrometry (HRCS-AAS), revealing that the anticancer effects are not particularly related to the different amounts of gold taken up by the cells over 72 h. Enzyme inhibition studies to evaluate the activity of the seleno-enzyme thioredoxin reductase (TrxR) in cancer cell extracts show that the gold(I) compound is a potent inhibitor (IC50=0.567±0.208 μM), while the free ligand is ineffective. This result correlates with the observed compound's selectivity towards A549 cells overexpressing the enzyme.

Linkage of the Dinuclear Gold(I) Complex Luminescence and Origin of Endocyclic Amino Group of Cyclic P2N2-Bridging Ligands.

Gold(I) complexes of LAu2Cl2 composition based on P2N2 ligands, namely 1,5-diaza-3,7-diphosphacyclooctanes, containing ethylpyridyl substituents at the phosphorus atoms and sp2- or sp3-hybridized endocyclic nitrogen atoms were synthesized. The SCXRD analysis indicated the strong impact of the geometry of the nitrogen atom on the structure and conformational flexibility of the complexes. The N-aryl substituted ligand with the planar endocyclic nitrogen atom provides higher flexibility of the complex and an ability to bind the solvent molecules in the "host-guest" mode, whereas that kind of behavior is forbidden for the complex with an N-alkyl substituted ligand with a pyramidal nitrogen atom. The substituents at nitrogen atoms also control the origin of the emission, which is phosphorescence for the N-aryl substituted complex and fluorescence for the N-alkylaryl substituted complex. The phosphorescent gold(I) complex displays high cytotoxicity without selectivity toward the m-HeLa and normal cells, but the core-shell nanoparticles formed on the base of the complex demonstrate reduced cytotoxicity. The luminescence of the NPs allows tracking the complexes in the cell samples.

Dinuclear gold(I) complexes based on carbene and diphosphane ligands: bis[2-(dicyclohexylphosphano)ethyl]amine complex inhibits the proteasome activity, decreases stem cell markers and spheroid viability in lung cancer cells.

Three new dinuclear gold(I) complexes (1-3) containing a carbene (1,3-Bis(2,6-di-isopropylphenyl)imidazol-2-ylidene (IPr)) and diphosphane ligands [bis(1,2-diphenylphosphano)ethane (Dppe), bis(1,3-diphenylphosphano)propane (Dppp) and bis[2-(dicyclohexylphosphano)ethyl]amine (DCyPA)], were synthesized and characterized by elemental analysis and, ESI-MS, mid FT-IR and NMR spectroscopic methods. The structures of complexes 2 and 3 were determined by X-ray crystallography, which revealed that the complexes are dinuclear having gold(I) ions linearly coordinated. The anticancer activities of the complexes (1-3) were evaluated in lung (A549), breast (MC-F7), prostate (PC-3), osteosarcoma (MG-63) and ovarian (A2780 and A2780cis) cancer models. Growth inhibition by the new complexes was higher than cisplatin in all cell lines tested. The mechanism of action of complex 3 was investigated in A549 cells using 2-dimensional (2D) models and 3D-multicellular tumor spheroids. Treatment of A549 cells with complex 3 caused: the induction of apoptosis and the generation of reactive oxygen species; the cell cycle arrest in the G0/G1 phase; the inhibition of both the proteasome and the NF-kB activity; the down-regulation of lung cancer stem cell markers (NOTCH1, CD133, ALDH1 and CD44). Complex 3 was more active than cisplatin also in 3D models of A549 lung cancer cells.

μ-1,2-Bis(dipheylphosphino)ethane-κ2P,P’]bis(3-mercapto-1,2-propanediolato-κS-gold(I))

A new dinuclear gold(I) complex, possessing a bridging diphosphine ligand (1,2-bis(diphenylphosphino)ethane) and two terminal thiol ligands (1-thioglycerol), was synthesized and fully characterized by IR, 1H and 31P NMR, fluorescence, ESI-mass, and diffuse reflection spectroscopy, together with X-ray diffraction and elemental analyses. The compound formed a 1D chain supramolecular structure through intermolecular aurophilic interactions in the crystal structure, leading to photoluminescence in the solid state.

A Fourfold Gold(I)-Aryl Macrocycle with Hyperbolic Geometry and its Reductive Elimination to a Carbon Nanoring Host.

An ethylene glycol-decorated [6]cyclo-meta-phenylene (CMP) macrocycle was synthesized and utilized as a subunit to construct a fourfold AuI 2 -aryl metallacycle with an overall square arrangement. The corners consist of rigid dinuclear gold(I) complexes previously known to form only triangular metallacycles. The interplay between the conformational flexibility of the [6]CMP macrocycle and the rigid dinuclear gold(I) moieties enable the square geometry, as revealed by single-crystal X-ray diffraction. The formation of the gold complex shows size-selectivity compared to an alternative route using platinum(II) corner motifs. Upon reductive elimination, an all-organic ether-decorated carbon nanoring was obtained. Investigation as a host for the complexation of large guest molecules with a suitable convex π-surfaces was accomplished using isothermal NMR binding titrations. Association constants for [6]cycloparaphenylene ([6]CPP), [7]CPP, C60 , and C70 were determined.

Near-white light emission from single crystals of cationic dinuclear gold(I) complexes with bridged diphosphine ligands.

Three cationic dinuclear Au(I) complexes containing acetonitrile (AN) as an ancillary ligand were synthesized: [μ-LMe(AuAN)2]·2BF4 (1), [μ-LEt(AuAN)2]·2BF4 (2), and [μ-LiPr(AuAN)2]·2BF4 (3) (LMe = {1,2-bis[bis(2-methylphenyl)phosphino]benzene}, LEt = {1,2-bis[bis(2-ethylphenyl)phosphino]benzene}, and LiPr = {1,2-bis[bis(2-isopropylphenyl)phosphino]benzene}). The unique structures of complexes 1-3 with two P-Au(I)-AN rods bridged by rigid diphosphine ligands were determined through X-ray analysis. The Au(I)-Au(I) distances observed for complexes 1-3 were as short as 2.9804-3.0457 Å, indicating an aurophilic interaction between two Au(I) atoms. Unlike complexes 2 and 3, complex 1 incorporated CH2Cl2 into the crystals as crystalline solvent molecules. Luminescence studies in the crystalline state revealed that complexes 1 and 2 mainly exhibited bluish-purple phosphorescence (PH) at 293 K: the former had a PH peak wavelength at 415 nm with the photoluminescence quantum yield ΦPL = 0.12, and the latter at 430 nm with ΦPL = 0.13. Meanwhile, complex 3 displayed near-white PH, that is dual PH with two PH bands centered at 425 and 580 nm with ΦPL = 0.44. The PH spectra and lifetimes of complexes 2 and 3 were measured in the temperature range of 77-293 K. The two PH bands observed for complex 3 were suggested to originate from the two emissive excited triplet states, which were in thermal equilibrium. From theoretical calculations, the dual PH observed for complex 3 is explained to occur from the two excited triplet states, T1H and T1L: the former exhibits a high-energy PH band (bluish-purple) and the latter exhibits a low-energy PH band (orange). The T1H state is considered 3ILCT with a structure similar to that of the S0-optimized structure. Conversely, the T1L state is assumed to be a 3MLCT with a T1-optimized structure, which has a short Au(I)-Au(I) bond and two bent rods (Au-AN). The thermal equilibrium between the two excited states is discussed based on computational calculations and photophysical data in the temperature range of 77-293 K. With regard to the crystal of complex 1, we were unable to precisely measure the temperature-dependent emission spectra and lifetimes, particularly at low temperatures, because the cooled crystals became irreversibly turbid over time.

Intra- vs Intermolecular Aurophilic Contacts in Dinuclear Gold(I) Compounds: Impact on the Population of the Triplet Excited State

Two series of dinuclear gold(I) complexes that contain two Au-chromophore units (chromophore = dibenzofurane or dimethylfluorene) connected through a diphosphane bridge that differs in the flexibility and length (diphosphane = dppb for 1,4-bis(diphenylphosphino)butane, DPEphos for bis[(2-diphenylphosphino)phenyl]ether, xanthphos for 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, and BiPheP for 2,2'-bis(diphenylphosphino)-1,1'-biphenyl) have been synthesized and structurally characterized. Their photophysical properties have been carefully investigated, paying attention to the role of the presence, or absence, of aurophilic contacts and their nature (intra- or intermolecular character). This analysis was permitted due to the X-ray crystallographic determination of all of the structures of the compounds discussed herein. The quantum yields of the triplet population, ϕT, have been calculated by nanosecond-laser flash photolysis measurements, and we could determine the main role of the character of the aurophilic contacts in the resulting ϕT, being especially favored in the presence of intermolecular contacts. Time-dependent density functional theory (TD-DFT) calculations support the absorption and emission assignments and the shorter distance between S1 and the closest triplet excited state energy in the case of the compounds with a higher triplet-state population.

Noncovalent Synergy: Aurophilicity and Aryl Stacking in Bis(gold(I)aryl)-dmpm Complexes.

Bis(dimethylphosphino)methane (dmpm) was used as a ligand to synthesize four semi-supported dinuclear gold(I) complexes, dmpm(AuR)2 (R = Cl, C6H5, C6Cl5, and C6F5), which were studied concerning the synergistic effects of two weak noncovalent interactions: aurophilic and aryl-aryl stacking interactions. The chloro-substituted complex was synthesized by the ligand substitution of (tht)AuCl with dmpm and further functionalized by the reaction with PhMgBr or in situ-generated C6Cl5Li to afford the phenyl- and pentachlorophenyl-substituted compounds, respectively. The pentafluorophenyl-substituted gold complex was generated by the ligand substitution of (tht)Au(C6F5) with dmpm. All complexes were characterized by multinuclear NMR spectroscopy, CHN analyses, and X-ray diffraction experiments. Additionally, the basic photoluminescence properties of dmpm(AuCl)2, dmpm(AuC6Cl5)2, and dmpm(AuC6F5)2 were examined. The aggregation behavior of dmpm(AuC6F5)2 was further investigated by variable-temperature diffusion-ordered NMR spectroscopy experiments.

Dinuclear gold(I) Complexes with Bidentate NHC Ligands as Precursors for Alkynyl Complexes via Mechanochemistry.

The use of alkynyl gold(I) complexes covers different research fields, such as bioinorganic chemistry, catalysis, and material science, considering the luminescent properties of the complexes. Regarding this last application, we report here the synthesis of three novel dinuclear gold(I) complexes of the general formula [(diNHC)(Au-C≡CPh)2]: two Au-C≡CPh units are connected by a bridging di(N-heterocyclic carbene) ligand, which should favor the establishment of semi-supported aurophilic interactions. The complexes can be easily synthesized through mechanochemistry upon reacting the pristine dibromido complexes [(diNHC)(AuBr)2] with phenylacetylene and KOH. Interestingly, we were also able to isolate the monosubstituted complex [(diNHC)(Au-C≡CPh)(AuBr)]. The gold(I) species were fully characterized by multinuclear NMR spectroscopy and mass spectrometry. The emission properties were also evaluated, and the salient data are comparable to those of analogous compounds reported in the literature.

Editorial: Stimuli-Responsive Emissive Organic and Metal-Organic Compounds

Light is an indispensable part in the production and living of human society, and the development of light-emitting materials is of great significance for high-tech innovations. Indeed, the exploitation of high-performance luminogenic materials has opened a new avenue to scientific advancement and societal development. For example, Chen et al. reported a fluorene-based dinuclear gold(I) complex. This complex demonstrated a remarkable aggregation-induced white-light emission feature, and it emitted high brightness solid-state and thin-film white luminescence. Furthermore, its thin-film white-light emission quantum yield was up to 65.42%, which enabled this gold(I) complex to serve as a potential candidate for white OLED (Chen et al., 2014). Benzobisthiadiazole (BBT) belongs to a typical near-infrared emissive unit, and the photoluminescence (PL) of numerous BBT derivatives lie in the second near-infrared wavelength ranges (NIR-II, 1000-1700 nm). The NIR-II-emissive nature of this type of compounds is beneficial to biomedical applications. Sun et al. elaborately designed a multipurpose nano-agent by incorporating a supramolecular Pt(II) metallacycle and a BBT-modified NIR-II-emissive organic dye into multifunctional melanin dots possessing photoacoustic and photothermal properties, and this prepared nano-agent displayed superior dual-modal imaging-guided chemo-photothermal synergistic therapy effect (Sun et al., 2019

Aggregation-Induced Emission with Alkynylcoumarin Dinuclear Gold(I) Complexes: Photophysical, Dynamic Light Scattering, and Time-Dependent Density Functional Theory Studies.

Aggregation-induced emission (AIE) has gained a remarkable amount of interest in the past 20 years, but the majority of the studies are based on organic structures. Herein, three dinuclear gold(I) complexes, with the general formula [PPh2XPPh2-Au2-Coum2], where the Au(I) atom is linked to three different diphosphanes [PPh2XPPh2; DPPM for X = CH2 (1.1), DPPP for X = (CH2)3 (1.2), and DPPA for X = C≡C (1.3)] and the propynyloxycoumarin precursor (1, 4-methyl-substituted coumarin), have been synthesized. The compounds present AIE characteristics, AIEgens, with high luminescence quantum yields in the solid state when they are compared to dilute solutions. Photophysical studies (steady-state and time-resolved fluorescence) were obtained, with AIE being observed with the three gold(I) complexes in acetonitrile/water mixtures. This was further corroborated with dynamic light scattering measurements. Time-dependent density functional theory (TDDFT) electronic calculations show that the compounds have different syn and anti conformations (relative to the coumarin core) with 1.1 syn and 1.2 and 1.3 both anti. From time-resolved fluorescence experiments, the augment in the contribution of the longer decay component is found to be associated with the emission of the aggregate (AIE effect) and its nature (involving a dimer) rationalized from TDDFT electronic calculations.

A novel cyclic dinuclear gold(I) complex induces anticancer activity via an oxidative stress-mediated intrinsic apoptotic pathway in MDA-MB-231 cancer cells.

A new dinuclear cyclic gold(I) complex [Au2(DCyPA)2](PF6)2, 1, based on bis[2-(dicyclohexylphosphano)ethyl]amine (DCyPA) has been synthesized and characterized by elemental analysis, IR and NMR spectroscopy, and X-ray crystallography. In the dinuclear complex cation [Au2(DCyPA)2]2+, the two gold(I) ions are bridged by the ligand bis[2-(dicyclohexylphosphano)ethyl]amine (DCyPA) giving rise to a 16-membered ring centrosymmetric metallacycle. The cytotoxicity of the complex was evaluated against the triple-negative human breast cancer cells MDA-MB-231. In order to understand the mechanism of the cytotoxic behavior, a variety of assays, including Annexin V-FITC/Propidium iodide double staining, ROS production, and mitochondrial membrane potential and migration assays were carried out. The results indicated that complex 1 induced cytotoxicity via an oxidative stress-mediated intrinsic apoptotic pathway in MDA-MB-231 cancer cells.