Dimensional Finite Impulse Response Research Articles

Design and implementation of two-dimensional digital finite impulse response filter using very high speed integrated circuit hardware description language

<span>The main purpose of this paper is to design a two-dimensional digital finite impulse response (FIR) filter using data broadcast and non-broadcast structure. The implementation of two-dimensional digital FIR filter is done using very high speed integrated circuit hardware description language (VHDL). Rectangular window method is used for calculating 2D digital FIR filter coefficients for data broadcast and non-broadcast structure. The coefficients of the one-dimensional digital FIR filter are obtained using the MATLAB filter design and analysis (FDA) tool for two different cut-off frequencies and are multiplied to get the necessary coefficient for the two-dimensional FIR filter to be designed; the simulation is done on Artix-7 series field programmable gate array (FPGA), target device (xc7a35t-cpg236) using Vivadov.2015.2. The proposed design reduces the area utilization and the power consumption when compared with the existing literature. The experimental result shows that the power consumption is improved by 97% and there is an improvement of 24% in area utilization for the two-dimensional with and without data broadcast one dimensional FIR filter structures.</span>

A novel accelerated artificial bee colony algorithm for optimal design of two dimensional FIR filter

This paper presents a novel approach for the design of two-dimensional (2D) Finite Impulse Response (FIR) filters. The design of FIR filters is generally non-differentiable, multimodal and higher dimensional; especially for 2D filters. A large number of filter coefficients are optimized either using constrained or unconstrained optimization approach. Due to the large number of constraints, traditional design methods cannot produce optimal filters required for some crucial applications. This makes meta-heuristic algorithms as good alternatives for addressing such constraints more efficiently. In order to improve the performance of 2D filters, we propose an Accelerated Artificial Bee Colony algorithm, termed as AABC algorithm. The earlier reported ABC based methods perform the modification of a single parameter of the solution in each cycle. But in this proposed AABC algorithm, we have adopted multiple parameters change of search equation at each step. This in turn improves the convergence speed of the algorithm by three times than the classical ABC algorithm and two times with respect to recently developed CABC method. In order to achieve better exploration behaviour of abandoned bees, we have also introduced a change during the initialization strategy of scout bees in the proposed AABC algorithm. The efficiency and robustness of the proposed algorithm are demonstrated by comparing its performance with classical Genetic Algorithm (GA), Particle Swarm Optimization , ABC and CABC methods.

Performance evaluation of signal dependent noise predictive maximum likelihood detector for two-dimensional magnetic recording read/write channel

Two-dimensional magnetic recording is affected by the inter-track interference (ITI) from the adjacent tracks. We investigate the improvement of partial response maximum likelihood (PRML) systems with signal dependent noise predictor (SDNP) in the bit error rate performance. The systems reduce the influence of ITI by two dimensional finite impulse response filter using the waveforms reproduced by triple readers from the adjacent tracks. The results show that the SDNP provides larger improvement to PR(2,6,1)ML system compare with PR1ML system.

Image denoising using 2-D FIR filters designed with DEPSO

Digital images are often corrupted by additive noises during transmission. Thus, how to alleviate noise as much as possible has received concerns for decades. In this paper, we present a simple denoising method based on two dimensional (2-D) finite impulse response (FIR) filtering, where by differential evolution particle swarm optimization (DEPSO) algorithm, five two dimensional finite impulse response filters are designed to filter different kinds of pixels. Comprised by differential evolution algorithm and particle swarm optimization algorithm, differential evolution particle swarm optimization algorithm is effective and robust, which helps to yield better denoise performance. And computer simulation demonstrates that the proposed method is superior to the conventional lowpass filtering method, as well as the modern bilateral filtering and stochastic denoising method.