Diimine Research Articles

Synthesis, Structure And Thermogravimetric Analysis Of Copper(II) Complex Derived From N1 ,N3 -Bis(1-(Pyridin2-Yl)Ethylidene)Propane-1,3-Diamine

Cu(II) complex derived from ligand, (N 1 ,N3 -bis(1-(pyridin-2-yl)ethylidene)propane-1,3-diamine (L) which was synthetized in situ, is reported. The isolated Cu(II) complex was characterized by elemental analyses, IR, and UV-Vis spectroscopies, and Thermogravimetric analyze (TGA). Additionally, the structure of the complex was determined by single crystal X-ray diffraction study. The diimine ligand was coordinated to Cu(II) ion through two azomethine nitrogen atoms and two pyridine nitrogen atom. One bromide ion complete the coordination sphere yielding a distorted square pyramidal geometry. The structure of the copper(II) complex is confirmed by X-ray diffraction. The complex crystallizes in the monoclinic space group P21/c with unit cell dimensions a = 8.3433 (3) Å, b = 13.2605 (3) Å, c = 18.838 (6) Å,  = 97.522 (16)°, V = 2066.2 (6) Å3 , Z = 4, R1 = 0.048 and wR2 = 0.081. The Cu(II)cation in N4Br inner is situated in a distorted square pyramidal environment. Thermogravimetric analyze of the complex were carried out at 20–800 °C and showed that the complex were decomposed into three steps.

Photo- and Electrocatalytic Hydrogen Evolution by Heteroleptic Dirhodium(II,II) Complexes: Role of the Bridging and Diimine Ligands.

A series of heteroleptic Rh2(II,II) complexes, cis-[Rh2(μ-DPhF)2(μ-bncn)2]2+ (1; bncn = benzo[c]cinnoline), cis-[Rh2(μ-DPhF)(μ-OAc)(μ-bncn)2]2+ (2), and cis-[Rh2(μ-OAc)2(μ-bncn)2]2+ (3), is presented, and the excited state and redox properties of each complex was characterized for the photo- and electrocatalytic production of H2. The oxidation potentials shift anodically from 1 to 3, consistent with a highest occupied molecular orbital (HOMO) with significant metal-ligand mixing, Rh2(δ*)/DPhF(π/nb). In contrast, modest differences in the first two bncn-localized reversible reduction potentials were observed in 1 - 3. The lowest energy metal/ligand-to-ligand charge transfer (1ML-LCT) transition, Rh2(δ*)/DPhF(π/nb) → bncn(π*), shifts from 633 nm in 1 to 553 nm in 2, and the metal-to-ligand charge transfer (1MLCT) Rh2(π*) → bncn(π*) absorption in 3 appears at 462 nm in CH3CN. Although the 3ML-LCT excited state of 2 is shorter lived than that of 1, 2.7 ns as compared to 19 ns, respectively, photocatalytic hydrogen generation is observed for the former upon 595 nm irradiation in the presence of 0.1 M TsOH (p-tolylsulfonic acid) and 0.1 M BNAH (1-benzyl-1,4-dihydronicotinamide). The temperature dependence of the 3ML-LCT lifetimes of 1 and 2 shows the presence of a thermally accessible deactivating state. In addition, the singly reduced intermediate, [2]-, is photoactive and able to generate hydrogen in the presence of TsOH. Importantly, the electrocatalytic currents generated by equimolar concentrations of 1 - 3 in CH3CN are nearly identical, consistent with a mechanism of catalysis that is localized on the bncn ligand and does not require a Rh-H hydride intermediate. This finding can be used to develop earth-abundant first-row transition metal complexes for photo- and electrocatalytic H2 production.

Biocompatible Re-Containing Block Copolymers for Intracellular pH Mapping in the PLIM Mode.

Monitoring of intracellular pH is of great importance since deviation of this parameter from the "normal" magnitudes can be considered as an indicator of various pathologies. Thus, the development of new efficient and biocompatible sensors suitable for application in biological systems and capable of quantitative pH estimation remains an urgent chemical task. Herein, we report the synthesis of a series of phosphorescent rhenium [Re(NN)(CO)2(PR3)2]+ complexes based on the NN diimine ligands containing pH-responsive carboxylic groups and styrene-containing phosphine ligands. The complexes, which display the highest pH sensitivity, were copolymerized with polyvinylpyrrolidone using the RAFT protocol to impart water solubility and to protect the chromophores from interaction with molecular oxygen. The resulting copolymers show an emission lifetime response onto pH variations in the physiological range. Cellular experiments with Chinese hamster ovary cells (CHO-K1) reveal easy internalization of the probes in cell culture and an approximately uniform distribution in cells, with some preference for location in acidic compartments (late endosomes and lysosomes). Using nigericin to homogenize intra- and extracellular pH, we built a calibration of lifetime versus pH in live CHO-K1 cells. Analysis of the phosphorescence lifetime imaging microscopy (PLIM) data confirms the applicability of the obtained sensors for monitoring the intracellular pH in cell cultures.

Towards efficient Ir(III) anticancer photodynamic therapy agents by extending π-conjugation on N^N ligands.

In this work we disclose a new family of biscyclometallated Ir(III) complexes of the general formula [Ir(C^N)2(N^N)]Cl (IrL1-IrL5), where HC^N is 1-phenyl-β-carboline and N^N ligands (L1-L5) are different diimine ligands that differ from each other in the number of aromatic rings fused to the bipyridine scaffold. The photophysical properties of IrL1-IrL5 were thoroughly studied, and theoretical calculations were performed for a deeper comprehension of the respective variations along the series. All complexes exhibited high photostability under blue light irradiation. An increase in the number of aromatic rings led to a reduction in the HOMO-LUMO band gap causing a red-shift in the absorbance bands. Although all the complexes generated singlet oxygen (1O2) in aerated aqueous solutions through a photocatalytic process, IrL5 was by far the most efficient photosensitizer. Consequently, IrL5 was highly active in the photocatalytic oxidation of NADH. The formation of aggregates in DMSO at a high concentration (25 mM) was confirmed using different techniques, but was proved to be negligible in the concentration range of biological experiments. Moreover, ICP-MS studies proved that the cellular uptake of IrL2 and IrL3 is much better relative to that of IrL1, IrL4 and IrL5. The antiproliferative activity of IrL1-IrL5 was investigated in the dark and under blue light irradiation against different cancer cell lines. Complexes IrL1-IrL4 were found to be cytotoxic under dark conditions, while IrL5 turned out to be weakly cytotoxic. Despite the low cellular uptake of IrL5, this derivative exhibited a high increase of cytotoxicity upon blue light irradiation resulting in photocytotoxicity indexes (PI) up to 38. IrL1-IrL4 showed lower photocytotoxicity indexes ranging from 1.3 to 17.0. Haemolytic experiments corroborated the compatibility of our complexes with red blood cells. Confocal microscopy studies proved their accumulation in mitochondria, leading to mitochondrial membrane depolarization, and ruled out their localization in lysosomes. Overall, the mitochondria-targeted activity of IrL5, which inhibits considerably the viability of cancer cells upon blue light irradiation, allows us to outline this PS as a new alternative to traditional chemotherapeutic agents.

New mixed ligand oxido-vanadium(V) complexes with O,O-donor and diimine ligands: Synthesis, crystal structure and catalytic activity in eco-friendly oxidation of olefins and phenol

The facile synthesis and structural characterization of a set of three new oxidovanadium(V) complexes of general formula [VO2(L)(diimine)], where L is ethyl-maltol(emal) (1), deferiprone(def) (2) or, maltol(mal) (3), and diimine is 5,6-dimethyl-1,10-phenanthroline(5,6-DMP) are described. The neutral complexes 1–3 have been comprehensively characterized by employing various analytical and spectroscopic techniques including single crystal X-ray diffraction analysis. The coordination geometry around the V(V) in each of the complexes was indicated by XRD-analysis to be distorted octahedral with equatorial plane being occupied by the deprotonated O,O-donor ligands. The complexes 1–3 could be successfully implemented in organic oxidations viz., hydroxylation of phenol (PH) and olefin epoxidation under environmentally clean organic-solvent-free conditions with aqueous H2O2 as oxidant. Phenol was selectively converted into dihydroxybenzene (DHB) products, catechol (CT) and hydroquinone (HQ) (HQ/CT=1.3:1) with aqueous H2O2 as oxidant at room temperature, with a TON value of 266. Moreover, the catalysts showed impressive activity in epoxidation of styrene and a range of cyclic olefins such as cyclohexene, cyclooctene, and norbornene in absence of organic solvent, to provide high conversion (up to 100 %) with excellent epoxide selectivity and good TON values. The catalysts are stable and afford recyclability for multiple cycles of epoxidation with virtually unaltered catalytic activity.

Visible Light-Driven Hydrogen Evolution Catalysis by Heteroleptic Ni(II) Complexes with Chelating Nitrogen Ligands: Probing Ligand Substituent Position and Photosensitizer Effects

This study aims to advance the field of green chemistry and catalysis by exploring alternatives to conventional non-renewable energy sources. Emphasis is placed on hydrogen as a potential fuel, with a focus on the catalytic properties of Ni(II) complexes when coordinated with o-phenylenediamine and diimine ligands. We report the synthesis and comprehensive characterization, with various physical and spectroscopic techniques, of three heteroleptic Ni(II) complexes: [Ni(1,10-phenanthroline)(o-phenylene diamine)] (1), [Ni(2,2-dimethyl-2,2-bipyridine)(o-phenylene diamine)] (2), and [Ni(5,5-dimethyl-2,2-bipyridine)(o-phenylene diamine)] (3). The catalytic activity of these complexes for hydrogen evolution was assessed through photochemical studies utilizing visible light irradiation. Two distinct photosensitizers, fluorescein and quantum dots, were examined under diverse conditions. Additionally, their electrocatalytic behavior was investigated to elucidate the hydrogen evolution reaction (HER) mechanism, revealing a combined proton-coupled electron transfer (PCET)/electron-coupled proton transfer (ECPT) mechanism attributed to the chemical nature of the diamine ligand. The influence of ligand substituent position, ligand chemical nature, and photosensitizer type on catalytic performance was systematically studied. Among the complexes investigated, complex 2 demonstrated superior catalytic performance, achieving a turnover number (TON) of 3357 in photochemical experiments using fluorescein as a photosensitizer. Conversely, complex 1 exhibited the highest TON of 30,066 for HER when quantum dots were employed as the photosensitizer.

Ethylene Polymerizations Catalyzed by Fluorinated "Sandwich" Diimine-Nickel and Palladium Complexes.

Nickel and palladium complexes bearing "sandwich" diimine ligands with perfluorinated aryl caps have been synthesized, characterized, and explored in ethylene polymerization reactions. The X-ray crystallographic analysis of the precatalysts 16 and 6b shows differences from their nonfluorinated analogues 17 and 19, with the perfluorinated aryl caps centered precisely over the nickel and palladium centers, which results in higher buried volumes of the metal centers relative to the nonfluorinated analogues. The sandwich diimine-palladium complexes 5a and 5b containing perfluorinated aryl caps polymerize ethylene in a controlled fashion with activities that are substantially increased compared with their nonfluorinated analogues. Migratory insertion rates in relevant methyl ethylene complexes agree with the activities exhibited in bulk polymerization experiments. DFT studies suggest that facility of ethylene rotation from its preferred orientation perpendicular to the Pd-alkyl bond into a parallel in-plane conformation contributes to the higher polymerization activity for 5b relative to 18a. For these palladium systems, polymer molecular weights can be controlled via hydrogen addition (hydrogenolysis), which is unusual for late-transition-metal-catalyzed olefin polymerizations with no catalyst deactivation occurring. Sandwich diimine-nickel complexes 6a and 6b with perfluorinated aryl caps show ethylene polymerization activities that are about half of those of classical tetraisopropyl-substituted catalyst 2 but again are more active than the analogous nonfluorinated sandwich complexes. Ethylene polymerizations exhibit living behavior, and branched ultrahigh-molecular-weight polyethylenes (UHMWPEs) with very low-molecular-weight distributions (less than 1.1) are obtained. The activated nickel catalysts are stable in the absence of monomer and show good long-term stability at 25 °C.

Circular Heterochiral Titanium-Based Self-Assembled Architectures.

Circular trinuclear helicates have been synthesized from a bis-biphenol strand (LH4), titanium isopropoxide, and various diimine ligands. These self-assembled architectures constructed around three TiO4N2 nodes have a heterochiral structure (C1 symmetry) when 2,2'-bipyridine (A), 4,4'-dimethyl-2,2'-bipyridine (B), 4,4'-bromo-2,2'-bipyridine (C), or 4,4'-dimethyl-2,2'-bipyrimidine (D) is employed. Within these complexes, one nitrogen ligand is endo-positioned inside the metallo-macrocycle, whereas the other two diimine ligands point outside the helicate framework. This investigation highlights that the nitrogen ligand which does not participate in the helicate framework of the complex controls the overall symmetry of the helicate since the 2,2'-bipyrimidine chelate (F) ends in the formation of a homochiral aggregate (C3 symmetry). The lack of symmetry found in the solid state for the trinuclear species ([Ti3L3(B)3], [Ti3L3(C)3], and [Ti3L3(D)3]) is observed for these complexes in solution (dichloromethane or chloroform). Remarkably, the 2,2'-bipyrazine ligand (ligand E) ends in the formation of a hexameric aggregate formulated as [Ti6L6(E)6], whereas the use of 4,4'-dimethyl-2,2'-bipyrimidine (ligand D) permits to generate the dinuclear complexes ([Ti2L(D)2(OiPr)4] and [Ti2L2(D)2]) in addition to the trimeric structure [Ti3L3(D)3]. The behavior of [Ti3L3(A)3] in solution, on the other hand, is unique since an equilibrium between the homochiral and the heterochiral form is reached within 17 days after the complex has been dissolved in dichloromethane (C3-[Ti3L3(A)3]/C1-[Ti3L3(A)3] ratio = 0.3). In chloroform, the heterochiral form of [Ti3L3(A)3] is stable for the same period of time, evidencing the dependence of this stereochemical transformation toward the solvent medium. The thermodynamic and kinetic parameters linked to this stereochemical equilibrium have been obtained and point to the fact that the transformation is intramolecular and not induced by the presence of external ligands. The thermodynamic constant of the C1-[Ti3L3(A)3]/C3-[Ti3L3(A)3] equilibrium is found to be K = 0.34 ± 10%. Further evidence to rationalize this solvent-induced symmetry switch is obtained via a DFT calculation and classical molecular dynamics. In particular, this computational investigation elucidates the reason why the stereochemical transformation of a heterochiral architecture into a homochiral structure is possible only for a trinuclear assembly containing ligand A.

Synthesis, Characterization, and Properties of a Titanium(IV)-Tetrathiafulvalene-Based Complex.

To deeply investigate the interaction between a tetrathiafulvalene (TTF) unit and a Ti(IV) center, a monomeric heteroleptic octahedral Ti(IV) complex containing a diimine ligand composed of a 1,10-phenanthroline core fused with a TTF fragment (ligand 2a) was prepared. The stable complex formulated as Ti(1)2(2a), where 1 is a 2,2'-biphenolato derivative, was efficiently synthesized by following a one-step approach. This complex and its model species [Ti(1)2(2b)] were fully characterized in solution, and their solid-state structures were established by single-crystal X-ray diffraction analysis. Density functional theory calculations allowed the assignment of the frontier orbitals involved in the electronic transitions characterized by ultraviolet-visible absorption spectroscopy. Electrochemical and spectroelectrochemical studies revealed that the TTF unit within Ti(1)2(2a) can undergo two reversible one-electron oxidation processes; a reversible one-electron reduction of the Ti(IV) atom was highlighted. The photophysical measurements performed for this donor-acceptor molecular system indicated that an electron transfer process upon light excitation occurred within Ti(1)2(2a).

Impact of Diimine Ligand on Singlet-to-Triplet Charge Transfer Electroabsorption in Iron and Ruthenium Complexes.

The electroabsorption and absorption spectra of eight homoleptic complexes of the general form [M(LL)3]2+ where M = Ru, Fe, and LL = 1,10-phenanthroline (phen), 2,2'-bipyridine (bpy), and 4,4',-(R)2-bpy where R = -OCH3, -CF3, were quantified at 77 K in a butyronitrile glass. Intense metal-to-ligand charge transfer (MLCT) absorption bands were evident in the visible region. Electroabsorption spectra measured with applied electric fields >0.2 MV/cm were analyzed by the two-state Liptay model. Significant light-induced dipole moment changes of = 4-13 D were found consistent with a metal-to-ligand charge transfer (MLCT) excited state comprised an electron localized on a single diimine ligand, [MIII(LL-)(LL)2]*2+, in the initially formed Franck-Condon excited state. A low energy feature evident in the electroabsorption spectra was assigned to a direct singlet-to-triplet MLCT excited state. The identity of the diimine ligand had an unexpected and large impact on these transitions. Analysis relative to the higher energy absorption provides a comparison of spin-allowed and disallowed transitions for first- and second-row transition metal complexes. With the notable exception of [Fe(CF3bpy)3]2+, the change in dipole moment for the 3MLCT excited states was less than or equal to that of the 1MLCT excited states. The charge transfer distances for the iron complexes were generally larger than those for the Ru complexes, a behavior attributed to a smaller degree of iron-diimine coupling in the ground state. A striking result was the sensitivity of the extinction coefficient and spectral profile of the low energy electroabsorption assigned to the identity of the diimine ligand; data that suggests electronic coupling with ligand localized triplet states and high spin metal centered states must be considered when modeling the Franck-Condon excited state.

Biocompatible Phosphorescent Ir(III) Complexes for Hypoxia Sensing in PLIM Mode

AbstractIn this work, two new biscyclometalated Ir(III) complexes with diimine ligands were synthesized. The compounds were characterized by 1D and 2D NMR spectroscopy and HR ESI mass spectrometry. All complexes exhibit efficient phosphorescence with pronounced sensitivity to the presence of oxygen. The photophysical properties of the obtained compounds, including absorption, emission spectra, lifetimes and quantum yields of phosphorescence were measured in various aqueous and model biological media with variations in pH, temperature and at various O2 concentrations. The complexes exhibit a very good sensory response to the changes in oxygen concentration, resulting in an increase in quantum yields and lifetimes by 2.8–5.5 times upon oxygen removal from aerated aqueous solutions. Biological tests with CHO‐K1 cell line have shown that these compounds display low toxicity, rapid internalization into cells and localization predominantly in lysosomes. For the most promising complex the phosphorescence lifetime imaging experiments were conducted, revealing that this sensor markedly changes the phosphorescence lifetime values in cells from 1.8 to 4.1 μs upon transition from normoxia to simulated hypoxia. The obtained results indicate that this type of iridium chromophores can be effectively used for assessing the oxygen status of living objects by using time‐resolved luminescent microscopy.

PH-responsive composite nanomaterial engineered from silica nanoparticles and luminescent mitochondrion-targeted Pt(II) complex as anticancer agent

The present work introduces a pH-dependent adsorption of water-soluble Pt(II) complex with diimine and alkynylphosphonium ligands ([Pt]2+) onto a surface of silica nanoparticles (SN-OH) as a strategy to develop a carrier function with an acidification-driven release of the complex. The adsorption of the complex onto a negatively charged silica surface shifts the equilibrium between dimeric and monomeric complex forms. The surface loading of [Pt]2+ is efficient at pH 7.0, and the acidification to pH 4.5 triggers the complex release. The interaction of [Pt]2+ with bovine serum albumin (BSA) influences the cell internalization and intracellular pathway of the complex, as well as the formation of the [Pt]2+-loaded SN-OH protein corona. The cytotoxicity data for the series of cancer and normal cell lines reveal the loading of [Pt]2+ into SN-OH as an efficient route for lower cytotoxicity and greater anticancer specificity of the nanoparticles compared to the complex. The flow cytometry and confocal microscopy methods reveal similarities in the cell internalization and intracellular pathway of [Pt]2+ and the [Pt]2+-loaded nanoparticles. The mitochondrial localization of [Pt]2+ and the [Pt]2+-loaded SN-OH does not cause noticeable changes in the membrane potential of mitochondria, and the cytotoxicity of [Pt]2+ in both forms is due to a non-apoptotic mechanism of cell death. Both the cytotoxicity and increased anticancer specificity of nanoparticles are associated with their carrier function, which is more pronounced in cancer cells with overdeveloped lysosomal compartments compared to normal ones.

Tuning a phosphine-substituted diimine ligand to afford an iron monocarbonyl complex

A series of low-valent iron complexes that feature a phosphine-substituted α-diimine (DI) ligand have been synthesized. Reduction of (Ph2PPrDI)FeBr2 with an excess of Na/Hg in the presence of carbon monoxide afforded the corresponding dicarbonyl complex, (Ph2PPrDI)Fe(CO)2. Through multinuclear NMR and single crystal X-ray diffraction analysis, this complex was found to possess a 3-coordinate DI ligand. Upon heating for 10 days at 110 °C while applying intermittent vacuum, (Ph2PPrDI)Fe(CO)2 was successfully converted to the corresponding monocarbonyl complex, (Ph2PPrDI)Fe(CO), which was found to feature a tetradentate chelate. Similar reactivity was explored using the analogous bis(tert-butyl)phosphine-substituted ligand, tBu2PPrDI. Addition of this chelate to FeBr2 afforded (tBu2PPrDI)FeBr2, and subsequent reduction yielded (tBu2PPrDI)FeBr, which was found to possess a tridentate DI ligand by single crystal X-ray diffraction. Performing the reduction of (tBu2PPrDI)FeBr2 in the presence of CO afforded the corresponding dicarbonyl complex, (tBu2PPrDI)Fe(CO)2. Like aryl-substituted (Ph2PPrDI)Fe(CO)2, alkyl-substituted (tBu2PPrDI)Fe(CO)2 was found to feature a pendant phosphine arm. However, heating (tBu2PPrDI)Fe(CO)2 under vacuum did not allow for phosphine substitution and conversion to the corresponding monocarbonyl complex, highlighting the importance of phosphine π-acidity for substitution and the stabilization of low-valent iron.

Ligand-Induced Intramolecular Redox Diversity in Titanium Complexes with Acenaphthene-1,2-diimine.

A series of the chlorido and alkoxychlorido titanium complexes of the general formula (dpp-Bian)Ti(OiPr)nCl3-n, where dpp-Bian = 1,2-bis[(2,6-iPr2C6H3)imino]acenaphthene n = 0 (2), 1 (3), 2 (4), as well as (dpp-Bian)Ti(OiPr)2 (5) and (dpp-Bian)Ti(OiPr)Cl3 (3-Cl), were isolated and characterized using single-crystal X-ray diffraction analysis and spectroscopic studies combined with density functional theory (DFT) calculations. In the solid state, compounds 2-4 reveal a square-pyramidal geometry at the metal center supported with monoanionic dpp-Bian, whereas 3-Cl with a neutral diimine ligand and 5 bearing a dianionic enebisamide dpp-Bian show, respectively, an octahedral and tetrahedral coordination surrounding the metal ion. Paramagnetic complexes 2-4 exhibit electron paramagnetic resonance spectra in both toluene solution and solid state, confirming the transfer of spin density from the metal ion to the dpp-Bian ligand as the number of alkoxy groups increases. The increase in polarity of the Ti-N bonds in the row 2 < 3 < 4 contributes to enhanced stability of the metal complexes with respect to O-donor molecules. Thus, in tetrahydrofuran (THF), compounds 2 and 3 undergo reversible solvolysis, whereas complex 4 is stable. The charge and spin density distributions as well as molecular orbital energies in 2-4 were analyzed on the basis of DFT calculations which also provided information on the electronic transition energies, absorption band assignments, and thermodynamic parameters of the reactions between the complexes and THF.

Photoactivatable Ruthenium Complexes Containing Minimal Straining Benzothiazolyl-1,2,3-triazole Chelators for Cancer Treatment.

Ruthenium(II) complexes containing diimine ligands have contributed to the development of agents for photoactivated chemotherapy. Several approaches have been used to obtain photolabile Ru(II) complexes. The two most explored have been the use of monodentate ligands and the incorporation of steric effects between the bidentate ligands and the Ru(II). However, the introduction of electronic effects in the ligands has been less explored. Herein, we report a systematic experimental, theoretical, and photocytotoxicity study of a novel series of Ru(II) complexes Ru1-Ru5 of general formula [Ru(phen)2(N∧N')]2+, where N∧N' are different minimal strained ligands based on the 1-aryl-4-benzothiazolyl-1,2,3-triazole (BTAT) scaffold, being CH3 (Ru1), F (Ru2), CF3 (Ru3), NO2 (Ru4), and N(CH3)2 (Ru5) substituents in the R4 of the phenyl ring. The complexes are stable in solution in the dark, but upon irradiation in water with blue light (λex = 465 nm, 4 mW/cm2) photoejection of the ligand BTAT was observed by HPLC-MS spectrometry and UV-vis spectroscopy, with t1/2 ranging from 4.5 to 14.15 min depending of the electronic properties of the corresponding BTAT, being Ru4 the less photolabile (the one containing the more electron withdrawing substituent, NO2). The properties of the ground state singlet and excited state triplet of Ru1-Ru5 have been explored using density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. A mechanism for the photoejection of the BTAT ligand from the Ru complexes, in H2O, is proposed. Phototoxicity studies in A375 and HeLa human cancer cell lines showed that the new Ru BTAT complexes were strongly phototoxic. An enhancement of the emission intensity of HeLa cells treated with Ru5 was observed in response to increasing doses of light due to the photoejection of the BTAT ligand. These studies suggest that BTAT could serve as a photocleavable protecting group for the cytotoxic bis-aqua ruthenium warhead [Ru(phen)2(OH2)2]2+.

Structures and circularly polarized luminescence of copper(I) complexes with chiral diimine and achiral diphosphine ligands

Abstract Copper(I) complexes with chiral diimine and diphosphine ligands were prepared and their chiroptical properties were investigated. By adding chirality to the diimine ligand, CPL (circularly polarized luminescence) intensities emitted from the copper(I) complex were enhanced to a maximum absolute gem value of 3 × 10−3, which is considered large for a mononuclear copper(I) complex.

Synthesis and Photophysical Evaluation of 3,3’‐Nitrogen Bis‐Substituted fac‐[Re(CO)3(Diimine)Br] Complexes

AbstractThe preparations, photophysical and electrochemical properties of a series of fac‐[Re(CO)3(diimine)Br] complexes are presented. The bipyridine (bpy) based diimine ligands feature symmetrical and asymmetrical 3,3’‐diamino‐2,2’‐bipyridine substitution patterns. Photophysical and electrochemical properties of these complexes are tunable, depending on their organic diimine framework. Introduction of a distal urea bridge via the 3,3’‐substitution pattern led to prolonged phosphorescence lifetimes without a significant change in absorbance and phosphorescence emission wavelengths. Reversible electrochemical bipyridine reduction remained largely unchanged by this derivatization.

Combined Machine Learning, Computational, and Experimental Analysis of the Iridium(III) Complexes with Red to Near-Infrared Emission.

Various coordination complexes have been the subject of experimental and theoretical studies in recent decades because of their fascinating photophysical properties. In this work, a combined experimental and computational approach was applied to investigate the optical properties of monocationic Ir(III) complexes. An interpretative machine learning-based quantitative structure-property relationship (ML/QSPR) model was successfully developed that could reliably predict the emission wavelength of the Ir(III) complexes and provide a foundation for the theoretical evaluation of the optical properties of Ir(III) complexes. A hypothesis was proposed to explain the differences in the emission wavelengths between structurally different individual Ir(III) complexes. The efficacy of the developed model was demonstrated by high R2 values of 0.84 and 0.87 for the training and test sets, respectively. It is worth noting that a relationship between the N-N distance in the diimine ligands of the Ir(III) complexes and emission wavelengths is detected. This effect is most probably associated with a degree of distortion in the octahedral geometry of the complexes, resulting in a perturbed ligand field. This combined experimental and computational approach shows great potential for the rational design of new Ir(III) complexes with the desired optical properties. Moreover, the developed methodology could be extended to other transition-metal complexes.

Synthesis and luminescent properties of three excellent yellow emissive Cu(i) complexes based on the diphosphine ligand and the diimine ligand

High quantum yield (72–88%) yellow-emitting Cu(i) complexes obtained by tuning the nitrogen ligands and anions.

Antimicrobial and anticancer properties of carbon monoxide releasing molecules of the fac-[Re(CO)3(N-N)L]+ family.

The toxicity profile of fac-[Re(CO)3(N-N)L]+ complexes against microbial and tumoral cells has been extensively studied, primarily focusing on modifications to the bidentate diimine (N-N) ligand. However, less attention has been paid to modifications of the axial ligand L, which is perpendicular to the Re-N-N plane. This study reveals that the high toxicity of the fac-[Re(CO)3(bpy)(Ctz)]+ complex may be attributed to the structural effect of the trityl (CPh3) group present in clotrimazole, as removal of phenyl rings causes a significant decrease in the activity against Staphylococcus aureus (S. aureus). Moreover, substitution of the 1-tritylimidazole ligand by the structurally related ligands PPh3 and PCy3 maintains similarly high activity levels. These findings contribute to understanding the interactions of toxic complexes with bacterial membranes, suggesting that the ligand structures play a crucial role in inhibiting cell wall synthesis processes, potentially including Lipid II synthesis. Compounds with Ph3E (E = C-imidazole; P) groups also showed to be 10 times more toxic than cisplatin against three mammalian cell lines (IC50: 2-4 μM). In contrast, the analogue 1-benzylimidazole and 1-tert-butylimidazole derivatives were as toxic as cisplatin. We observed that the decomposition of the [Re(I)(CO)3] fragment inside mammalian cell lines liberates CO, which is expected to exert biological effects. Therefore, compounds of this family possessing the structural motif Ph3E seem to combine high antimicrobial and antitumoral activities, the latter being much higher than that of cisplatin.