Digital Multimedia Broadcasting System Research Articles

A Fast and Efficient Add-Compare-Select Structure Using Hybrid Logic Asynchronous Pipeline Design

Convolutional or trellis codes are today widely used in digital communication networks and multimedia broadcasting systems. TheViterbi decoder is commonly used for decoding trellis codes due to its excellent forward error correction performance. High-performance and low-power Viterbi decoders are in great demand in the communication industry. Despite several significant developments in decoder design and architecture in the past decade, the issue of latency and power dissipation still remains a challenge requiring further investigation and innovation. This paper proposes arobust deep-pipelined Add-Compare-Select (ACS) Unit, based on a hybrid logic asynchronous pipeline design method. The ACS operation forms the primary deadlock on the performance of the decoder hardware. With the proposed structure, the ACS units and hence Viterbi Decoder operate at a 323.3% higher throughput with 76.4% reduced latency and 86.6% reduced power consumption, when compared with QDI based realization of the ACS unit.

Error Sensitivity Analysis of DMB Transport Streams

In this paper, we examine the sensitivity of the digital multimedia broadcasting (DMB) MPEG-2 transport stream (TS) format to transmission errors. To find the sensitivity of different parts of TS packets to transmission errors, each TS packet is divided into four cells, i.e., the first three cells comprising 48 bytes each and the last cell is of 44 bytes length. Bit errors are then introduced into these different parts of the TS packets. The sensitivity of DMB videos to transmission errors and their locations is assessed in terms of the following measures: 1) Number of decoder crashes; 2) Number of decodable videos; 3) Total number of decodable frames; and 4) Objective perceptual video quality of the decoded videos. The structural similarity index and visual information fidelity criterion are used as objective perceptual quality metrics. Simulations are performed on seven different DMB videos using various bit error rates. The results show that the first cell of the TS packets is highly sensitive to bit errors compared to the subsequent three cells, both in terms of spatial and temporal video quality. Further, the sensitivity decreases from Cell 1 to Cell 4 of a DMB TS packet. The error sensitivity analysis reported in this paper may guide the development of more reliable transmission systems for future DMB systems and services. Specifically, the insights gained from this study may support designing better error control schemes that take the sensitivity of different parts of DMB TS packets into consideration.

A consumer synchronizer for T-DMB receiver based on cooperative communications in emergency alert systems

Currently, terrestrial digital multimedia broadcasting (T-DMB) systems offer an emergency alert service called automatic emergency alert service (AEAS) in emergency alert systems. The performance of T-DMB receiver for AEAS can be enhanced using cooperative communication techniques. This paper assumes the T-DMB receiver based on a cooperative communication model. Since synchronization is crucial in the performance of cooperative communications, a novel consumer synchronizer is proposed in this paper for the T-DMB receiver based on cooperative communications. The presented synchronizer includes the identification of the selected relays, which is especially required in the best-relay selection for cooperative communications. Furthermore, a channel estimation approach is suggested in the synchronizer, which is suitable for T-DMB receivers under high frequencyselectivity. The experimental results reveal that the proposed synchronizer further enhances the performance of T-DMB receiver based on cooperative communications in emergency alert systems.

The Design and Implementation of Multiple Services Tracking and Parallelly Testing in CMMB System

We need to track and detect all kinds of business when we prepare to have a test on the network in the Mobile Digital Multimedia Broadcasting System. This paper raise a way can parallelly test all the physical parameters such as RSSI, multipath, constellation diagram, BER and SNR of the service time slot of every frame in CMMB system by making a research on the traditional way of multiple services tracking and parallelly testing in CMMB system.On the basis of traditional way, we increase parity service discriminant moduleodd service parameters test module and even service parameters test module and make reasonable control scheme that odd service parameters test module and even service parameters test module test and receive the input data alternately in time ,that is to say, they independently make internal data processing, which making a good solution to the problems that the occupation of the system resource and insufficient data processing time.

Planning of gap filler networks in satellite DMB systems for wireless multimedia services

Satellite digital multimedia broadcasting (S-DMB) systems use gap fillers (GFs) to provide wireless multimedia services to non-line-of-sight locations. GFs act as repeaters, and S-DMB systems require GF networks in order to guarantee mobile reception. Fach GF covers a cell or sector. In order to provide contiguous coverage of an area comprising two or more cells or sectors, multiple GFs are needed. However, when multiple GFs are situated close to each other, interference is likely to occur. As a result, in this study, we have investigated system-level environments for planning the design of interference-free GF networks in S-DMB systems. Our investigations revealed that S-DMB services are unavailable because of quality deterioration caused by interference when the delay attributable to a GF and the satellite signals exceeds ±256 chips and the distance between the GF and its reception terminal is greater than 4.6 km. On the basis of this analysis, we conducted a field test that confirmed that the above-mentioned time delay can be controlled in such a way as to ensure high quality S-DMB services.

Normalization Factor of Hierarchically Modulated Symbols for Advanced T-DMB System

In this paper, we derived the exact formula for the normalization factor of both B-mode and Q-mode hierarchically modulated symbols of the advanced terrestrial digital multimedia broadcasting (AT-DMB) system. This factor is required to scale the average energy of the transmit symbol to one. After investigating the average energy of hierarchically modulated symbols in AT-DMB, we formulate the normalization factor as a term of the constellation ratio. Based on this normalization factor, we have verified the effect after normalization on bit error rate (BER) performance.

Decimation-interpolation structures for image communications and improvement using the lifting scheme

This paper presents an analysis of Decimation- Interpolation (DI) structures for image communications, and proposes an improvement method of DI structures. Decimation and interpolation techniques are important to efficiently transmit or store images in image communications systems such as digital multimedia broadcasting systems. The conventional design of DI structures is mainly based on the design of decimation and interpolation filters independently. Thus, the designs of the two filters are converged to a lowpass filter design. However, the conventional approach is possibly limited in performance and complexity. In this paper, we introduce some combinations of decimation and interpolation filters, and analyze the effect of the combinations in the spectral domain. We evaluate the combinations by conducting many experiments. Experimental results indicate that a good combination of the two filters provides a superior performance. On this basis, we propose an improvement method of the given DI structure. The proposed method is based on the lifting scheme whose structure is adaptable to the DI structure. Another simulation results show that the proposed method increases the performance of the given DI structure in terms of PSNR.

Backward-compatible terrestrial digital multimedia broadcasting system for multichannel audio service

In this paper, a Terrestrial Digital Multimedia Broadcasting (T-DMB) system for a multichannel audio service is proposed. The multichannel audio information on the T-DMB system proposed in this paper consists of a stereo audio signal coded by BSAC and additional multichannel side information coded by MPEG surround. These two types of information are conveyed through two elementary streams (ES), respectively. To control two elementary streams, two object descriptor (OD) streams are exploited, each of which transmits OD commands, including ObjectDescriptorUpdate and ES_DescriptorUpdate, related to a stereo audio signal and additional multichannel side information, respectively. With this method, the proposed system can convey multichannel side information while guaranteeing backward compatibility for the legacy T-DMB terminals, and moreover makes it possible to provide various advanced service scenarios with outstanding extensibility.

Polarization-Diversity Cross-Shaped Patch Antenna for Satellite-DMB Systems

A small reconfigurable patch antenna is proposed to achieve polarization diversity for digital multimedia broadcasting systems at 2.6 GHz. To obtain polarization diversity, a pair of on-slit PIN diodes is inserted in each diagonal of a cross-shaped patch. Thus, four PIN-diodes on these slits are utilized to change the connection of the slits and thus achieve polarization. Bias circuits for the diodes are allocated in the cutting corner of the crossshaped patch to minimize the antenna size. The antenna produces left-hand circular polarization, right-hand circular polarization, or linear polarization, depending on the PIN-diode status. Analysis of circular polarization operation is explicated. Measurements show a gain of about 1.5 dB, a cross polarization of about -20 dB, and an axial ratio of about 2.5 dB.

지상파 DMB RF 수신기에서 클락 잡음 제거를 위한 인쇄 회로 기판 설계

본 논문은 지상파 DMB에서 기준 클락 신호에 의한 RF 수신기의 민감도 열화 현상을 분석하고, 이를 해결하기 위한 새로운 PCB 설계 기법을 제안하였다. 현재 DMB 수신기 시스템에 사용되는 기준 주파수는 16.384 MHz, 19.2 MHz, 24.576 MHz의 세 종류가 있다. 이러한 기준 주파수의 고조파 성분이 RF 채널 주파수에 근접할 경우, 해당 채널의 감도가 심각히 열화될 수 있다. 이러한 클락 고조파 결합 문제를 해결하기 위해 스트립라인 형태의 새로운 클락 배선 설계 기법을 제안하였다. 제안된 기법은 인덕턴스 성분을 사용하여 클락 신호의 접지 단자를 주 접지 단자와 분리하고, 클락 신호선과 주변 접지면의 결합 커패시턴스 성분을 최소화 하도록 설계되었다. 이를 DMB 수신기 보드에 적용하여 수신기의 감도가 최대 2 dB 개선됨을 측정을 통하여 확인하였다. This paper proposes a new clock routing design for suppressing clock harmonic effects in a Printed Circuit Board (PCB) for a terrestrial Digital Multimedia Broadcasting(DMB) system. Typical crystal reference frequencies that are widely used in DMB tuners are 16.384 MHz, 19.2 MHz, 24.576 MHz. When the high-order harmonic components of these reference frequencies fall near the RF channel frequencies, receiver sensitivity of the tuners is seriously degraded. In this work, we propose a new clock routing design in order to address the clock harmonic coupling issue. The proposed design incorporates two inductors for isolating the clock ground from the main ground, and adopts a new strip line-style routing instead of the conventional microstrip line style routing to minimize the overlap area with the main ground. As a result, the RF sensitivity of the T-DMB tuner is improved by 2 dB.

Novel Equalization On-Channel Repeater with Feedback Interference Canceller in Terrestrial Digital Multimedia Broadcasting System

In this paper, we propose a novel equalization on-channel repeater (OCR) with a feedback interference canceller (FIC) to relay terrestrial digital multimedia broadcasting signals in single frequency networks. The proposed OCR not only has high output power by cancelling the feedback signals caused by insufficient antenna isolation through the FIC, but also shows better output signal quality than the conventional OCR by removing multipath signals existing between the main transmitter and the OCR through an equalizer. In addition, computer simulations and laboratory test results demonstrate that the proposed OCR successfully cancels feedback signals and compensates channel distortions and provides a higher quality transmitting signal with higher output power than conventional OCRs. Keywords: T-DMB, single frequency network (SFN), on-channel repeater (OCR), equalizer, feedback interference canceller (FIC).

A Higher Data-Rate T-DMB System Based on a Hierarchical A-DPSK Modulation

Hierarchical modulation can be effectively used to enhance terrestrial digital multimedia broadcasting (T-DMB) or digital audio broadcasting (DAB) systems in response to both the demand for higher data-rate and the need to be backward compatible with legacy receivers. QAM-type modulations are well-liked for hierarchical transmission but require coherent detection based on pilot symbol aided channel estimation. In the T-DMB or the DAB system using DQPSK modulation, however, any available pilot symbols except for the phase reference symbol do not exist. Differential amplitude phase shift keying (DAPSK) modulation is easily applied to the T-DMB system for a hierarchical modulation but may be susceptible to fast fading. As a good candidate for a hierarchical modulation of T-DMB to solve the above problems, we propose an amplitude differential phase shift keying (A-DPSK) modulation which is robust to fast fading by estimating only amplitude coefficients of the channel transfer function with the use of amplitude pilots. To raise the accuracy of channel estimation, we arrange the amplitude pilots in a come-type and introduce a noise-reduction scheme of averaging estimated channel coefficients. Simulation results show that the proposed A-DPSK provides a good choice for achieving a higher data-rate over other possible modulation schemes for advanced T-DMB or DAB systems.

Efficient Generation of Scalable Transport Stream for High Quality Service in T-DMB

We introduce an advanced terrestrial digital multimedia broadcasting (AT-DMB) system that overcomes the limitation of data transmission rates of T-DMB by doubling it with the same frequency bandwidth. In this letter, we propose an efficient algorithm which generates a scalable transport stream in AT-DMB by multiplexing certain types of elementary streams encoded using scalable video coding and an MPEG- surround audio coder for high-quality multimedia services.

Evaluation of Cooperative Diversity Techniques Using STC for Future S-DMB Services

This paper presents an evaluation of various cooperative diversity techniques applied to future satellite digital multimedia broadcasting (S-DMB) systems. The increasing importance of hybrid and/or integrated satellite and terrestrial networks is associated with the utilization of spatial diversity techniques such as antenna diversity using space-time coding. The space-time coding schemes can be expected to result in more diversity gain as the number of transmit antennas are increased. However, we cannot design a rate-1 scheme that achieves full diversity for more than two transmit antennas. To overcome this limitation, quasi-orthogonal schemes were proposed, at the expense of the decoder complexity and diversity gain. In this paper, we introduce an efficient quasi-orthogonal space time coding scheme, and evaluate various aspects associated with the application of the proposed scheme to satellite systems. The proposed scheme in this paper provides the full rate as well as maximum-likelihood decoding via simple linear detection.

Implementing a DVB-T/H Receiver on a Software-Defined Radio Platform

Digital multimedia broadcasting is available in more and more countries with various forms. One of the most successful forms is Digital Video Broadcasting for Terrestrial (DVB-T), which has been deployed in most countries of the world for years. In order to bring the digital multimedia broadcasting services to battery-powered handheld receivers in a mobile environment, Digital Video Broadcasting for Handheld (DVB-H) has been formally adopted by ETSI. More advanced and complex digital multimedia broadcasting systems are under development, for example, the next generation of DVB-T, a.k.a. DVB-T2. Current commercial DVB-T/H receivers are usually built upon dedicated application-specific integrated circuits (ASICs). However, ASICs are not flexible for incoming evolved standards and less overall-area efficient since they cannot be efficiently reused and shared among different radio standards, when we integrate a DVB-T/H receiver into a mobile phone. This paper presents an example implementation of a DVB-T/H receiver on the prototype of Infineon Technologies' Software-Defined Radio (SDR) platform called MuSIC (Multiple SIMD Cores), which is a DSP-centered and accelerator-assisted architecture and aims at battery-powered mass-market handheld terminals.

A Cross-Layer Delay Differentiation Packet Scheduling Scheme for Multimedia Content Delivery in 3G Satellite Multimedia Systems

The design of efficient packet scheduling algorithms, which play a key role in the radio resource management (RRM), is crucial for the multimedia delivery in the satellite digital multimedia broadcasting (SDMB) system. In this paper, a novel packet scheduling scheme, which uses the cross-layer approach in its design, is proposed. This scheme comprises a new service prioritization algorithm and a dynamic rate matching based resource allocation algorithm, aimed at utilizing both the applications' QoS attributes and the physical layer data rate information. The performance of the proposed scheme has been evaluated via simulation. In comparison with existing schemes, the proposed scheme achieves significant performance gain on delay, delay variation and physical channel utilization.

Equalization On-Channel Repeater for Terrestrial Digital Multimedia Broadcasting System

This paper presents technical requirements of on-channel repeaters (OCRs) to broadcast the terrestrial digital multimedia broadcasting (T-DMB) signals in single frequency network (SFN) environment. In order to meet such requirements, the configuration and implementation method of the equalization OCR are proposed. The proposed equalization OCR does not have only short processing delay, but also provides high quality transmitting signals with high power because of the rejection capability of a feedback signal introduced by incomplete antenna isolation and multipath signals existing between a main transmitter and the OCR. Computer simulations and laboratory tests results are provided to figure out performance of the proposed equalization OCR.

A 10 b 25 MS/s 4.8 mW 0.13 µm CMOS ADC with switched‐bias power‐reduction techniques

AbstractThis paper proposes a 10 b 25 MS/s 4.8 mW 0.13 µm CMOS analog‐to‐digital converter (ADC) for high‐performance portable wireless communication systems, such as digital video broadcasting, digital audio broadcasting, and digital multimedia broadcasting (DMB) systems, simultaneously requiring a low‐voltage, low‐power, and small chip area. A two‐stage pipeline architecture optimizes the overall chip area and power dissipation of the proposed ADC at the target resolution and sampling rate, while switched‐bias power‐reduction techniques reduce the power consumption of the power‐hungry analog amplifiers. Low‐noise reference currents and voltages are implemented on chip with optional off‐chip voltage references for low‐power system‐on‐a‐chip applications. An optional down‐sampling clock signal selects a sampling rate of 25 or 10 MS/s depending on applications in order to further reduce the power dissipation. The prototype ADC fabricated in a 0.13 µm 1P8M CMOS technology demonstrates a measured peak differential non‐linearity and integral non‐linearity within 0.42 LSB and 0.91 LSB and shows a maximum signal‐to‐noise‐and‐distortion ratio and spurious‐free dynamic range of 56 and 65 dB at all sampling frequencies up to 25 MHz, respectively. The ADC with an active die area of 0.8 mm2 consumes 4.8 and 2.4 mW at 25 and 10 MS/s, respectively, with a 1.2 V supply. Copyright © 2008 John Wiley & Sons, Ltd.

계층변조 시스템에서 신호의 우선순위를 이용한 블라인드 등화

이 논문에서는 계층변조를 적용하는 AT-DMB (advanced terrestrial digital multimedia broadcasting) 시스템에 적용할 수 있는 블라인드등화 기법을 제시하고 그 성능을 살펴본다. AT-DMB 시스템은 기존 T-DMB의 DQPSK (differential quadrature phase-shift keying) 신호와 역방향 호환성을 보장하고 더 높은 데이터 전송률을 지원하기 위해 16-QAM (quadrature amplitude modulation) 계층변조 방식을 적용한다. 이 결과 SNR (signal to noise ratio)에 따라 기존 T-DMB 심볼과 추가된 심볼은 서로 다른 판정오율 (decision error rate)을 가진다. 따라서 판정한 신호로부터 채널을 추정할 때 판정오율이 낮은 선순위 심볼과 판정오율이 높은 후순위 심볼의 신뢰도에 따라 다른 가중치를 줌으로써 판정치의 전체적인 신뢰도를 향상시킬 수 있다. 이 논문에서는 계층변조에 따른 비트 오율(bit error rate) 성능의 악화정도를 분석하고, 모의실험을 통해 판정신호의 신뢰도에 따라 가중치를 주는 제안방식이 가중치를 주지 않은 경우에 비해 비트 오율 성능이 향상됨을 확인하였다. In this paper, we propose a blind equalization method for advanced terrestrial digital multimedia broadcasting (AT-DMB) systems which use hierarchical modulation. The AT-DMB system adopts hierarchical 16-ary quadrature amplitude modulation (16-QAM) to ensure backward-compatibly with the differential quadrature phase shift keying (DQPSK) signal of the legacy terrestrial digital multimedia broadcasting (T-DMB) systems and to support higher transmission rate. Due to the hierarchical modulation, the conventional T-DMB signal and the additional signal have different error rate at same signal to noise ratio (SNR). By weighting the decided symbols differently according to the reliability of the symbols, i.e., high priority symbol with low error rate and low priority symbol with high error rate, we can improve the channel estimation accuracy. In this paper, we analyze SNR loss by hierarchical modulation and confirm it through simulations. Moreover, through simulations, we verify that the proposed weighting method improve BER compared to the no-weighting method.

Optimal transmission policies for MOT in T-DMB

The Multimedia Object Transfer (MOT) protocol in Terrestrial Digital Multimedia Broadcasting (T-DMB) systems inherently does not facilitate return paths in data transmission and therefore additional policies are required to envision further efficient reliable media broadcasting. This letter proposes novel optimal transmission policies for MOT standard definition in T-DMB. The proposed broadcasting policies drastically enhance the capability of conventional MOT protocol.