Digital Breast Tomosynthesis Volume Research Articles

SAH-NET: Structure-Aware Hierarchical Network for Clustered Microcalcification Classification in Digital Breast Tomosynthesis.

Benign and malignant classification of clustered microcalcifications (MCs) in digital breast tomosynthesis (DBT) is an essential task in computer-aided diagnosis. However, due to the anisotropic resolution of DBT, three-dimensional (3-D) convolutional neural network (CNN)-based methods cannot extract hierarchical features efficiently. Moreover, the sparse distribution of MC points in the cluster makes it difficult for the CNN to extract discriminative structural information for classification. To comprehensively address these challenges, we propose a novel structure-aware hierarchical network (SAH-Net) for benign and malignant classification of clustered MC in a DBT volume. Specifically, the two-dimensional (2-D) group convolution is used to extract intraslice features. The one-to-one correspondence between group convolutions and slices ensures the independence of hierarchical feature extraction. Then, a partial deformable Transformer-based 3-D structural feature learning module is proposed to capture the long-range dependency between MC points in the cluster. We evaluate the proposed method on an in-house dataset with 495 clustered MCs collected from 462 DBT images. Experimental results confirm the validity of our proposed modules. The results also show that the proposed SAH-Net outperforms several other representative methods on this topic, and achieves the best classification result, with an area under the receiver operation curve (AUC) of 86.87%. The implementation of the proposed model is available at https://github.com/sunhaotian130911/SAHNet.

Optimized signal of calcifications in wide-angle digital breast tomosynthesis: a virtual imaging trial.

Evaluate microcalcification detectability in digital breast tomosynthesis (DBT) and synthetic 2D mammography (SM) for different acquisition setups using a virtual imaging trial (VIT) approach. Medio-lateral oblique (MLO) DBT acquisitions on eight patients were performed at twice the automatic exposure controlled (AEC) dose. The noise was added to the projections to simulate a given dose trajectory. Virtual microcalcification models were added to a given projection set using an in-house VIT framework. Three setups were evaluated: (1) standard acquisition with 25 projections at AEC dose, (2) 25 projections with a convex dose distribution, and (3) sparse setup with 13 projections, every second one over the angular range. The total scan dose and angular range remained constant. DBT volume reconstruction and synthetic mammography image generation were performed using a Siemens prototype algorithm. Lesion detectability was assessed through a Jackknife-alternative free-response receiver operating characteristic (JAFROC) study with six observers. For DBT, the area under the curve (AUC) was 0.97 ± 0.01 for the standard, 0.95 ± 0.02 for the convex, and 0.89 ± 0.03 for the sparse setup. There was no significant difference between standard and convex dose distributions (p = 0.309). Sparse projections significantly reduced detectability (p = 0.001). Synthetic images had a higher AUC with the convex setup, though not significantly (p = 0.435). DBT required four times more reading time than synthetic mammography. A convex setup did not significantly improve detectability in DBT compared to the standard setup. Synthetic images exhibited a non-significant increase in detectability with the convex setup. Sparse setup significantly reduced detectability in both DBT and synthetic mammography. This virtual imaging trial study allowed the design and efficient testing of different dose distribution trajectories with real mammography images, using a dose-neutral protocol. • In DBT, a convex dose distribution did not increase the detectability of microcalcifications compared to the current standard setup but increased detectability for the SM images. • A sparse setup decreased microcalcification detectability in both DBT and SM images compared to the convex and current clinical setups. • Optimal microcalcification cluster detection in the system studied was achieved using either the standard or convex dose setting, with the default number of projections.

CAPNet: Context attention pyramid network for computer-aided detection of microcalcification clusters in digital breast tomosynthesis

Background and objectiveComputer-aided detection (CADe) of microcalcification clusters (MCs) in digital breast tomosynthesis (DBT) is crucial in the early diagnosis of breast cancer. Although convolutional neural network (CNN)-based detection models have achieved excellent performance in medical lesion detection, they are subject to some limitations in MC detection: 1) Most existing models employ the feature pyramid network (FPN) for multi-scale object detection; however, the rough feature sharing between adjacent layers in the FPN may limit the detection ability for small and low-contrast MCs; and 2) the MCs region only accounts for a small part of the annotation box, so the features extracted indiscriminately within the whole box may easily be affected by the background. In this paper, we develop a novel CNN-based CADe method to alleviate the impacts of the above limitations for the accurate and rapid detection of MCs in DBT. MethodsThe proposed method has two parts: a novel context attention pyramid network (CAPNet) for intra-layer MC detection in two-dimensional (2D) slices and a three-dimensional (3D) aggregation procedure for aggregating 2D intra-layer MCs into a 3D result according to their connectivity in 3D space. The proposed CAPNet is based on an anchor-free and one-stage detection architecture and contains a context feature selection fusion (CFSF) module and a microcalcification response (MCR) branch. The CFSF module can efficiently enrich shallow layers’ features by the complementary selection of local context features, aiming to reduce the missed detection of small and low-contrast MCs. The MCR branch is a one-layer branch parallel to the classification branch, which can alleviate the influence of the background region within the annotation box on feature extraction and enhance the ability of the model to distinguish MCs from normal breast tissue. ResultsWe performed a comparison experiment on an in-house clinical dataset with 648 DBT volumes, and the proposed method achieved impressive performance with a sensitivity of 91.56 % at 1 false positive per DBT volume (FPs/volume) and 93.51 % at 2 FPs/volume, outperforming other representative detection models. ConclusionsThe experimental results indicate that the proposed method is effective in the detection of MCs in DBT. This method can provide objective, accurate, and quick diagnostic suggestions for radiologists, presenting potential clinical value for early breast cancer screening.

Deep learning denoising of digital breast tomosynthesis: Observer performance study of the effect on detection of microcalcifications in breast phantom images.

The noise in digital breast tomosynthesis (DBT) includes x-ray quantum noise and detector readout noise. The total radiation dose of a DBT scan is kept at about the level of a digital mammogram but the detector noise is increased due to acquisition of multiple projections. The high noise can degrade the detectability of subtle lesions, specifically microcalcifications (MCs). We previously developed a deep-learning-based denoiser to improve the image quality of DBT. In the current study, we conducted an observer performance study with breast radiologists to investigate the feasibility of using deep-learning-based denoising to improve the detection of MCs in DBT. We have a modular breast phantom set containing seven 1-cm-thick heterogeneous 50% adipose/50% fibroglandular slabs custom-made by CIRS, Inc. (Norfolk, VA). We made six 5-cm-thick breast phantoms embedded with 144 simulated MC clusters of four nominal speck sizes (0.125-0.150, 0.150-0.180, 0.180-0.212, 0.212-0.250mm) at random locations. The phantoms were imaged with a GE Pristina DBT system using the automatic standard (STD) mode. The phantoms were also imaged with the STD+ mode that increased the average glandular dose by 54% to be used as a reference condition for comparison of radiologists' reading. Our previously trained and validated denoiser was deployed to the STD images to obtain a denoised DBT set (dnSTD). Seven breast radiologists participated as readers to detect the MCs in the DBT volumes of the six phantoms under the three conditions (STD, STD+, dnSTD), totaling 18 DBT volumes. Each radiologist read all the 18 DBT volumes sequentially, which were arranged in a different order for each reader in a counter-balanced manner to minimize any potential reading order effects. They marked the location of each detected MC cluster and provided a conspicuity rating and their confidence level for the perceived cluster. The visual grading characteristics (VGC) analysis was used to compare the conspicuity ratings and the confidence levels of the radiologists for the detection of MCs. The average sensitivities over all MC speck sizes were 65.3%, 73.2%, and 72.3%, respectively, for the radiologists reading the STD, dnSTD, and STD+ volumes. The sensitivity for dnSTD was significantly higher than that for STD (p<0.005, two-tailed Wilcoxon signed rank test) and comparable to that for STD+. The average false positive rates were 3.9±4.6, 2.8±3.7, and 2.7±3.9 marks per DBT volume, respectively, for reading the STD, dnSTD, and STD+ images but the difference between dnSTD and STD or STD+ did not reach statistical significance. The overall conspicuity ratings and confidence levels by VGC analysis for dnSTD were significantly higher than those for both STD and STD+ (p≤0.001). The critical alpha value for significance was adjusted to be 0.025 with Bonferroni correction. This observer study using breast phantom images showed that deep-learning-based denoising has the potential to improve the detection of MCs in noisy DBT images and increase radiologists' confidence in differentiating noise from MCs without increasing radiation dose. Further studies are needed to evaluate the generalizability of these results to the wide range of DBTs from human subjects and patient populations in clinical settings.

Developing breast lesion detection algorithms for digital breast tomosynthesis: Leveraging false positive findings.

Due to the complex nature of digital breast tomosynthesis (DBT) in imaging techniques, reading times are longer than 2D mammograms. A robust computer-aided diagnosis system in DBT could help radiologists reduce their workload and reading times. The purpose of this study was to develop algorithms for detecting biopsy-proven breast lesions on DBT using multi-depth level convolutional models and leveraging non-biopsied samples. As biopsied positive samples in a lesion dataset are limited, we hypothesized that false positive (FP) findings by detection algorithms from non-biopsied benign lesions could improve detection algorithms by using them as data augmentation. We first extracted 2D slices from DBT volumes with biopsy-proven breast lesions (cancer and benign), with non-biopsied benign lesions (actionable), and for controls. Then, to provide lesion continuity along the z-direction, we combined a lesion slice with its immediate adjacent slices to synthesize 2.5-dimensional (2.5D) images of the lesion by assigning them into R, G, and B color channels. We used 224 biopsy-proven lesions from 39 cancer and 62 benign patients from a DBTex challenge dataset of 1000 scans. We included the 2.5D images of immediate neighboring slices from the lesion's center to increase the number of training samples. For lesion detection, we used the YOLOv5 algorithm as our base network. We trained a baseline algorithm (medium-depth level) using biopsied samples to detect actionable FPs in non-biopsied images. Afterward, we fine-tuned the baseline model on the augmented image set (actionable FPs added). For lesion inferencing, we processed the DBT volume slice-by-slice to estimate bounding boxes in each slice, and then combined them by connecting bounding boxes along the depth via volumetric morphological closing. We trained an additional model (large) with deeper-depth levels by repeating the above process. Finally, we developed an ensemble algorithm by combining the medium and large detection models. We used the free-response operating characteristic curve to evaluate our algorithms. We reported mean sensitivity per FPs per DBT volume only for biopsied views and sensitivity at 2-false positives per image (2FPI) for all views. However, due to the limited accessibility to the truth of the challenge validation and test datasets, we used sensitivity at 2FPI for statistical evaluation. For the DBTex independent validation set, the medium baseline model achieved a mean sensitivity of 0.627 FPs per DBT volume, and a sensitivity of 0.640 at 2FPI. After adding actionable FP lesions, the model had an improved 2FPI of 0.769 over the baseline (p-value=0.013). Our ensemble algorithm with multi-depth levels (medium + large) achieved a mean sensitivity of 0.815 FPs per DBT volume and an improved sensitivity at 2FPI of 0.80 over the baseline (p-value<0.001) on the validation set. Finally, our ensemble model achieved a mean sensitivity of 0.786 FPs per DBT volume and a sensitivity of 0.743 at 2FPI on the DBTex independent test set. Our results show that actionable FP findings hold useful information for lesion detection algorithms, and our ensemble detection model with multi-depth levels improves lesion detection performance.

Architectural distortion detection based on superior-inferior directional context and anatomic prior knowledge in digital breast tomosynthesis.

In 2020, breast cancer becomes the most leading diagnosed cancer all over the world. The burden is increasing in the prevention and treatment of breast cancer. Accurately detecting breast lesions in screening images is important for early detection of cancer. Architectural distortion (AD) is one of the breast lesions that need to be detected. To develop a deep-learning-based computer-aided detection (CADe) model for AD in digital breast tomosynthesis (DBT). This model uses the superior-inferior directional context of DBT and anatomic prior knowledge to reduce false positive (FP). It can identify some negative samples that cannot be distinguished by deep learning features. The proposed CADe model consists of three steps. In the first step, a deep learning detection network detects two-dimensional (2D) candidates of ADs in DBT slices with the inputs preprocessed by Gabor filters and convergence measure. In the second step, three-dimensional (3D) candidates are obtained by stacking 2D candidates along superior-inferior direction. In the last step, FP reduction for 3D candidates is implemented based on superior-inferior directional context and anatomic prior knowledge of breast. DBT data from 99 cases with AD were used as the training set to train the CADe model, and data from 208 cases were used as an independent test set (including 108 cases with AD and 100 cases without AD as the control group). The free-response receiver operating characteristic and mean true positive fraction (MTPF) in the range of 0.05-2.0 FPs per volume are used to evaluate the model. Compared with the baseline model based on convergence measure, our proposed method demonstrates significant improvement (MTPF: 0.2826±0.0321vs. 0.6640±0.0399). Results of an ablation study show that our proposed context- and anatomy-based FP reduction methods improve the detection performance. The number of FPs per DBT volume reduces from 2.47 to 1.66 at 80% sensitivity after employing these two schemes. The deep learning model demonstrates practical value for AD detection. The results indicate that introducing superior-inferior directional context and anatomic prior knowledge into model can indeed reduce FPs and improve the performance of CADe model.

Synthesis of Mammogram From Digital Breast Tomosynthesis Using Deep Convolutional Neural Network With Gradient Guided cGANs.

Synthetic digital mammography (SDM), a 2D image generated from digital breast tomosynthesis (DBT), is used as a potential substitute for full-field digital mammography (FFDM) in clinic to reduce the radiation dose for breast cancer screening. Previous studies exploited projection geometry and fused projection data and DBT volume, with different post-processing techniques applied on re-projection data which may generate different image appearance compared to FFDM. To alleviate this issue, one possible solution to generate an SDM image is using a learning-based method to model the transformation from the DBT volume to the FFDM image using current DBT/FFDM combo images. In this study, we proposed to use a deep convolutional neural network (DCNN) to learn the transformation to generate SDM using current DBT/FFDM combo images. Gradient guided conditional generative adversarial networks (GGGAN) objective function was designed to preserve subtle MCs and the perceptual loss was exploited to improve the performance of the proposed DCNN on perceptual quality. We used various image quality criteria for evaluation, including preserving masses and MCs which are important in mammogram. Experiment results demonstrated progressive performance improvement of network using different objective functions in terms of those image quality criteria. The methodology we exploited in the SDM generation task to analyze and progressively improve image quality by designing objective functions may be helpful to other image generation tasks.

Deep Convolutional Neural Network With Adversarial Training for Denoising Digital Breast Tomosynthesis Images.

Digital breast tomosynthesis (DBT) is a quasi-three-dimensional imaging modality that can reduce false negatives and false positives in mass lesion detection caused by overlapping breast tissue in conventional two-dimensional (2D) mammography. The patient dose of a DBT scan is similar to that of a single 2D mammogram, while acquisition of each projection view adds detector readout noise. The noise is propagated to the reconstructed DBT volume, possibly obscuring subtle signs of breast cancer such as microcalcifications (MCs). This study developed a deep convolutional neural network (DCNN) framework for denoising DBT images with a focus on improving the conspicuity of MCs as well as preserving the ill-defined margins of spiculated masses and normal tissue textures. We trained the DCNN using a weighted combination of mean squared error (MSE) loss and adversarial loss. We configured a dedicated x-ray imaging simulator in combination with digital breast phantoms to generate realistic in silico DBT data for training. We compared the DCNN training between using digital phantoms and using real physical phantoms. The proposed denoising method improved the contrast-to-noise ratio (CNR) and detectability index (d') of the simulated MCs in the validation phantom DBTs. These performance measures improved with increasing training target dose and training sample size. Promising denoising results were observed on the transferability of the digital-phantom-trained denoiser to DBT reconstructed with different techniques and on a small independent test set of human subject DBT images.

Deep learning of mammary gland distribution for architectural distortion detection in digital breast tomosynthesis

Computer aided detection (CADe) for breast lesions can provide an important reference for radiologists in breast cancer screening. Architectural distortion (AD) is a type of breast lesion that is difficult to detect. A majority of CADe methods focus on detecting the radial pattern, which is a main characteristic of typical ADs. However, a few atypical ADs do not exhibit such a pattern. To improve the performance of CADe for typical and atypical ADs, we propose a deep-learning-based model that used mammary gland distribution as prior information to detect ADs in digital breast tomosynthesis (DBT). First, information about gland distribution, including the Gabor magnitude, the Gabor orientation field, and a convergence map, were produced using a bank of Gabor filters and convergence measures. Then, this prior information and an original slice were input into a Faster R-CNN detection network to obtain the 2-D candidates for each slice. Finally, a 3-D aggregation scheme was employed to fuse these 2-D candidates as 3-D candidates for each DBT volume. Retrospectively, 64 typical AD volumes, 74 atypical AD volumes, and 127 normal volumes were collected. Six-fold cross-validation and mean true positive fraction (MTPF) were used to evaluate the model. Compared to an existing convergence-based model, our proposed model achieved an MTPF of 0.53 ± 0.04, 0.61 ± 0.05, and 0.45 ± 0.04 for all DBT volumes, typical + normal volumes, and atypical + normal volumes, respectively. These results were significantly better than those of 0.36 ± 0.03, 0.46 ± 0.04, and 0.28 ± 0.04 for a convergence-based model (p ≪ 0.01). These results indicate that employing the prior information of gland distribution and a deep learning method can improve the performance of CADe for AD.

3D Context-Aware Convolutional Neural Network for False Positive Reduction in Clustered Microcalcifications Detection.

False positives (FPs) reduction is indispensable for clustered microcalcifications (MCs) detection in digital breast tomosynthesis (DBT), since there might be excessive false candidates in the detection stage. Considering that DBT volume has an anisotropic resolution, we proposed a novel 3D context-aware convolutional neural network (CNN) to reduce FPs, which consists of a 2D intra-slices feature extraction branch and a 3D inter-slice features fusion branch. In particular, 3D anisotropic convolutions were designed to learn representations from DBT volumes and inter-slice information fusion isonly performed on the feature map level, which could avoid the influence of anisotropic resolution of DBT volume. The proposed method was evaluated on a large-scale Chinese women population of 877 cases with 1754 DBT volumes and compared with 8 related methods. Experimental results show that the proposed network achieved the best performance with an accuracy of 92.68% for FPs reduction with an AUC of 97.65%, and the FPs are 0.0512 per DBT volume at a sensitivity of 90%. This also proved that making full use of 3D contextual information of DBT volume can improve the performance of the classification algorithm.

Multi-domain features for reducing false positives in automated detection of clustered microcalcifications in digital breast tomosynthesis.

In digital breast tomosynthesis (DBT) imaging, a microcalcification (MC) cluster may span across different slices and blurring exists in the out-of-focus slices. We developed a radiomics approach to extract features from focus slice and combine multiple spatial domains to reduce false positives (FPs) in an automated pipeline of detecting MC clusters. We performed a retrospective study on a cohort of 290 Chinese women patients with a total of 580 DBT volumes. We developed an automated MC detection pipeline that consists of two stages: an initial detection to identify a set of MC candidates that may include many FPs, followed by a radiomics-based classification model to identify and reduce the FPs. We extract both two-dimensional (2D) and three-dimensional (3D) radiomics features from multiple spatial domains, including a focus slice, projection image, and tomographic volume. A linear discriminant classifier was used coupled with a sequential forward feature selection procedure. The free-response operating characteristics (FROC) curve and partial area under the FROC curve (pAUC) in the FP rate range of 0 to 2 per DBT volume were used to evaluate the model's performance. At a sensitivity of 90%, the FP rate was reduced from 1.3 to 0.2 per DBT volume after applying the multi-domain-based classification on the initial detections. The multi-domain yielded a significantly higher pAUC compared to the initial detection (increase of pAUC=0.2278, P<0.0001), focus slice (increase of pAUC=0.0345, P=0.0152), project image (increase of pAUC=0.1043, P<0.0001), and tomographic volume (increase of pAUC=0.0791, P=0.0032). The radiomic features extracted from the three domains may provide complementary information and their integration can significantly reduce FPs in automated detection of MCs in DBT volumes on a large Chinese women population.

Computer-aided detection of mass in digital breast tomosynthesis using a faster region-based convolutional neural network.

Digital breast tomosynthesis (DBT) is a newly developed three-dimensional tomographic imaging modality in the field of breast cancer screening designed to alleviate the limitations of conventional digital mammography-based breast screening methods. A computer-aided detection (CAD) system was designed for masses in DBT using a faster region-based convolutional neural network (faster-RCNN). To this end, a data set was collected, including 89 patients with 105 masses. An efficient detection architecture of convolution neural network with a region proposal network (RPN) was used for each slice to generate region proposals (i.e., bounding boxes) with a mass likelihood score. In each DBT volume, a slice fusion procedure was used to merge the detection results on consecutive 2D slices into one 3D DBT volume. The performance of the CAD system was evaluated using free-response receiver operating characteristic (FROC) curves. Our RCNN-based CAD system was compared with a deep convolutional neural network (DCNN)-based CAD system. The RCNN-based CAD generated a performance with an area under the ROC (AUC) of 0.96, whereas the DCNN-based CAD achieved a performance with AUC of 0.92. For lesion-based mass detection, the sensitivity of RCNN-based CAD was 90% at 1.54 false positive (FP) per volume, whereas the sensitivity of DCNN-based CAD was 90% at 2.81 FPs/volume. For breast-based mass detection, RCNN-based CAD generated a sensitivity of 90% at 0.76 FP/breast, which is significantly increased compared with the DCNN-based CAD with a sensitivity of 90% at 2.25 FPs/breast. The results suggest that the faster R-CNN has the potential to augment the prescreening and FP reduction in the CAD system for masses.

Simplified computer-aided detection scheme of microcalcification clusters in digital breast tomosynthesis images.

A computer-aided detection (CADe) algorithm for clustered microcalcifications (MCs) in reconstructed digital breast tomosynthesis (DBT) images is suggested. The MC-like objects were enhanced by a Hessian-based 3D calcification response function, and a signal-to-noise ratio (SNR) enhanced image was also generated to screen the MC clustering seed objects. A connected component segmentation method was used to detect the cluster seed objects, which were considered as potential clustering centers of MCs. Bounding cubes for the accepted clustering seed candidate were generated and the overlapping cubes were combined and examined. After the MC clustering and false-positive (FP) reduction step, the average number of FPs was estimated to be 0.87 per DBT volume with a sensitivity of 90.5%.

INDIVIDUALISED CALCULATION OF TISSUE IMPARTED ENERGY IN BREAST TOMOSYNTHESIS.

The imparted energy to the glandular tissue in the breast (glandular imparted energy, GIE) is proposed for an improved assessment of the individual radiation-induced risk resulting from X-ray breast imaging. GIE is computed from an estimation of the quantity and localisation of glandular tissue in the breast. After a digital breast tomosynthesis (DBT) acquisition, the volumetric glandular content (volumetric breast density, VBD) is computed from the central X-ray projection. The glandular tissue distribution is determined by labelling the DBT voxels to ensure the conservation of the VBD. Finally, the GIE is calculated by Monte Carlocomputation on the resulting tissue-labelled DBT volume. For verification, the method was applied to 10 breast-shaped digital phantoms made of different glandular spheres in an adipose background, and to a digital anthropomorphic phantom. Results were compared to direct GIE computations on the phantoms considered as 'ground-truth'. The major limitations in accuracy are those of DBT, in particular the limitedz-resolution. However, for most phantoms, the results can be considered as acceptable.

Three-Dimensional Computer-Aided Detection of Microcalcification Clusters in Digital Breast Tomosynthesis.

We propose computer-aided detection (CADe) algorithm for microcalcification (MC) clusters in reconstructed digital breast tomosynthesis (DBT) images. The algorithm consists of prescreening, MC detection, clustering, and false-positive (FP) reduction steps. The DBT images containing the MC-like objects were enhanced by a multiscale Hessian-based three-dimensional (3D) objectness response function and a connected-component segmentation method was applied to extract the cluster seed objects as potential clustering centers of MCs. Secondly, a signal-to-noise ratio (SNR) enhanced image was also generated to detect the individual MC candidates and prescreen the MC-like objects. Each cluster seed candidate was prescreened by counting neighboring individual MC candidates nearby the cluster seed object according to several microcalcification clustering criteria. As a second step, we introduced bounding boxes for the accepted seed candidate, clustered all the overlapping cubes, and examined. After the FP reduction step, the average number of FPs per case was estimated to be 2.47 per DBT volume with a sensitivity of 83.3%.

Detection of masses in digital breast tomosynthesis using complementary information of simulated projection.

The purpose of this study is to develop a computer-aided detection system that combines the detection results in 3D digital breast tomosynthesis (DBT) volume and 2D simulated projection (synthesized image which is not provided by the vendor but generated from DBT volume in this study) to improve the accuracy of mass detection in DBT. The 3D DBT volume has a problem of blurring in the out-of-focus plane because it is reconstructed from a limited number of projection view images acquired over a limited angular range. To solve the problem, the simulated projection is generated by measuring the blurriness of voxels in the DBT volume and adopting conspicuity voxels. A contour-based detection algorithm is applied to detecting masses in the simulated projection. The DBT volume is analyzed by using an unsupervised mass detection algorithm, which results in mass candidates in the DBT volume. The mass likelihood scores estimated for mass candidates on the DBT volume and the simulated projection are merged in a probabilistic manner through a Bayesian network model to differentiate masses and false positives (FPs). Experiments were conducted on a clinical data set of 320 DBT volumes. In 90 volumes, at least one biopsy-proven malignant mass was presented. The longest diameter of masses ranged from 7.0 to 56.4 mm (mean = 25.4 mm). The sizes of masses in the data set were relatively large compared to the sizes of the masses reported in other detection studies. Three image quality measurements (overall sharpness, sharpness of mass boundary, and contrast) were used to evaluate the image quality of the simulated projection compared to the DBT central slice where the mass was most conspicuous and other projection methods (maximum intensity projection and average projection). A free-response receiver operating characteristic (FROC) analysis was adopted for evaluating the accuracy of mass detection in the DBT volume, the simulated projection, and the combined approach. A jackknife FROC analysis (JAFROC) was used to estimate the statistical significance of the difference between two FROC curves. The overall sharpness and the sharpness of mass boundary in the simulated projection are higher than those in the DBT central slice and other projection methods. The contrast of the simulated projection is lower than the DBT central slice. The mass detection in the DBT volume achieved region-based sensitivities of 80% and 85% with 1.75 and 2.11 FPs per DBT volume. The proposed combined mass detection approach achieved same sensitivities with reduced FPs of 1.33 and 1.93 per DBT volume. The difference of the FROC curves between the combined approach and the mass detection in the DBT volume was statistically significant (p < 0.01) by JAFROC analysis. This study indicates that the combined approach that merges the detection results in the DBT volume and the simulated projection is a promising approach to improve the accuracy of mass detection in DBT.

Computer-aided detection system for clustered microcalcifications in digital breast tomosynthesis using joint information from volumetric and planar projection images

We propose a novel approach for the detection of microcalcification clusters (MCs) using joint information from digital breast tomosynthesis (DBT) volume and planar projection (PPJ) image. A data set of 307 DBT views was collected with IRB approval using a prototype DBT system. The system acquires 21 projection views (PVs) from a wide tomographic angle of 60° (60°-21PV) at about twice the dose of a digital mammography (DM) system, which allows us the flexibility of simulating other DBT acquisition geometries using a subset of the PVs. In this study, we simulated a 30° DBT geometry using the central 11 PVs (30°-11PV). The narrower tomographic angle is closer to DBT geometries commercially available or under development and the dose is matched approximately to that of a DM. We developed a new joint-CAD system for detection of clustered microcalcifications. The DBT volume was reconstructed with a multiscale bilateral filtering regularized method and a PPJ image was generated from the reconstructed volume. Task-specific detection strategies were designed to combine information from the DBT volume and the PPJ image. The data set was divided into a training set (127 views with MCs) and an independent test set (104 views with MCs and 76 views without MCs). The joint-CAD system outperformed the individual CAD systems for DBT volume or PPJ image alone; the differences in the test performances were statistically significant (p < 0.05) using JAFROC analysis.

Multiscale bilateral filtering for improving image quality in digital breast tomosynthesis.

Detection of subtle microcalcifications in digital breast tomosynthesis (DBT) is a challenging task because of the large, noisy DBT volume. It is important to enhance the contrast-to-noise ratio (CNR) of microcalcifications in DBT reconstruction. Most regularization methods depend on local gradient and may treat the ill-defined margins or subtle spiculations of masses and subtle microcalcifications as noise because of their small gradient. The authors developed a new multiscale bilateral filtering (MSBF) regularization method for the simultaneous algebraic reconstruction technique (SART) to improve the CNR of microcalcifications without compromising the quality of masses. The MSBF exploits a multiscale structure of DBT images to suppress noise and selectively enhance high frequency structures. At the end of each SART iteration, every DBT slice is decomposed into several frequency bands via Laplacian pyramid decomposition. No regularization is applied to the low frequency bands so that subtle edges of masses and structured background are preserved. Bilateral filtering is applied to the high frequency bands to enhance microcalcifications while suppressing noise. The regularized DBT images are used for updating in the next SART iteration. The new MSBF method was compared with the nonconvex total p-variation (TpV) method for noise regularization with SART. A GE GEN2 prototype DBT system was used for acquisition of projections at 21 angles in 3° increments over a ± 30° range. The reconstruction image quality with no regularization (NR) and that with the two regularization methods were compared using the DBT scans of a heterogeneous breast phantom and several human subjects with masses and microcalcifications. The CNR and the full width at half maximum (FWHM) of the line profiles of microcalcifications and across the spiculations within their in-focus DBT slices were used as image quality measures. The MSBF method reduced contouring artifacts and enhanced the CNR of microcalcifications compared to the TpV method, thus preserving the image quality of the structured background. The MSBF method achieved the highest CNR of microcalcifications among the three methods. The FWHM of the microcalcifications and mass spiculations resulting from the MSBF method was comparable to that without regularization, and superior to that of the TpV method. The SART regularized by the multiscale bilateral filtering method enhanced the CNR of microcalcifications and preserved the sharpness of microcalcifications and spiculated masses. The MSBF method provided better image quality of the structured background and was superior to TpV and NR for enhancing microcalcifications while preserving the appearance of mass margins.

Digital breast tomosynthesis: computer-aided detection of clustered microcalcifications on planar projection images

This paper describes a new approach to detect microcalcification clusters (MCs) in digital breast tomosynthesis (DBT) via its planar projection (PPJ) image. With IRB approval, two-view (cranio-caudal and mediolateral oblique views) DBTs of human subject breasts were obtained with a GE GEN2 prototype DBT system that acquires 21 projection angles spanning 60° in 3° increments. A data set of 307 volumes (154 human subjects) was divided by case into independent training (127 with MCs) and test sets (104 with MCs and 76 free of MCs). A simultaneous algebraic reconstruction technique with multiscale bilateral filtering (MSBF) regularization was used to enhance microcalcifications and suppress noise. During the MSBF regularized reconstruction, the DBT volume was separated into high frequency (HF) and low frequency components representing microcalcifications and larger structures. At the final iteration, maximum intensity projection was applied to the regularized HF volume to generate a PPJ image that contained MCs with increased contrast-to-noise ratio (CNR) and reduced search space. High CNR objects in the PPJ image were extracted and labeled as microcalcification candidates. Convolution neural network trained to recognize the image pattern of microcalcifications was used to classify the candidates into true calcifications and tissue structures and artifacts. The remaining microcalcification candidates were grouped into MCs by dynamic conditional clustering based on adaptive CNR threshold and radial distance criteria. False positive (FP) clusters were further reduced using the number of candidates in a cluster, CNR and size of microcalcification candidates. At 85% sensitivity an FP rate of 0.71 and 0.54 was achieved for view- and case-based sensitivity, respectively, compared to 2.16 and 0.85 achieved in DBT. The improvement was significant (p-value = 0.003) by JAFROC analysis.

Multichannel response analysis on 2D projection views for detection of clustered microcalcifications in digital breast tomosynthesis

To investigate the feasibility of a new two-dimensional (2D) multichannel response (MCR) analysis approach for the detection of clustered microcalcifications (MCs) in digital breast tomosynthesis (DBT). With IRB approval and informed consent, a data set of two-view DBTs from 42 breasts containing biopsy-proven MC clusters was collected in this study. The authors developed a 2D approach for MC detection using projection view (PV) images rather than the reconstructed three-dimensional (3D) DBT volume. Signal-to-noise ratio (SNR) enhancement processing was first applied to each PV to enhance the potential MCs. The locations of MC candidates were then identified with iterative thresholding. The individual MCs were decomposed with Hermite-Gaussian (HG) and Laguerre-Gaussian (LG) basis functions and the channelized Hotelling model was trained to produce the MCRs for each MC on the 2D images. The MCRs from the PVs were fused in 3D by a coincidence counting method that backprojects the MC candidates on the PVs and traces the coincidence of their ray paths in 3D. The 3D MCR was used to differentiate the true MCs from false positives (FPs). Finally a dynamic clustering method was used to identify the potential MC clusters in the DBT volume based on the fact that true MCs of clinical significance appear in clusters. Using two-fold cross validation, the performance of the 3D MCR for classification of true and false MCs was estimated by the area under the receiver operating characteristic (ROC) curve and the overall performance of the MCR approach for detection of clustered MCs was assessed by free response receiver operating characteristic (FROC) analysis. When the HG basis function was used for MCR analysis, the detection of MC cluster achieved case-based test sensitivities of 80% and 90% at the average FP rates of 0.65 and 1.55 FPs per DBT volume, respectively. With LG basis function, the average FP rates were 0.62 and 1.57 per DBT volume at the same sensitivity levels. The difference in the two sets of basis functions for detection of MCs did not show statistical significance. The authors' experimental results indicate that the MCR approach is promising for the detection of MCs on PV images. The HG or LG basis functions are both effective in characterizing the signal response of MCs using the channelized Hotelling model. The coincidence counting method for fusion of the 2D MCR in 3D is an important step for FP reduction. Further study is underway to improve the MCR approach for microcalcification detection in DBT.