Diffusion-ordered NMR Research Articles

Near-Infinite-Chain Polymers with Ge=Ge Double Bonds.

Despite considerable interest in heteroatom-containing conjugated polymers, there are only few examples with heavier p-block elements in the conjugation path. The recently reported heavier acyclic diene metathesis (HADMET) allowed for the synthesis of a polymer containing Ge=Ge double bonds - albeit insoluble and with limited degree of polymerization. By incorporation of long alkyl chains, we now obtained soluble representatives, which exhibit degrees of polymerization near infinity according to diffusion-ordered NMR spectroscopy (DOSY) and dynamic light scattering (DLS). Analyses of the UV/Vis absorption and the NMR spectroscopic data confirm the presence of σ,π-conjugation across the silylene-phenylene linkers between the Ge=Ge double bonds. Favorable intermolecular dispersion interactions lead to ladder-like cylindrical supramolecular assemblies as confirmed by X-ray diffraction (XRD), small angle X-ray scattering (SAXS) and DLS. AFM and TEM images of deposited thin films reveal lamellar ordering of extended polymer bundles.

Speedy Component Resolution Using Spatially Encoded Diffusion NMR Data.

Diffusion-ordered NMR spectroscopy (DOSY) is a powerful tool to analyse mixtures. Spatially encoded (SPEN) DOSY enables recording a full DOSY dataset in just one scan by performing spatial parallelisation of the gradient dimension. The simplest and most widely used approach to processing DOSY data is to fit each peak in the spectrum with a single or multiple exponential decay. However, when there is peak overlap, and/or when the diffusion decays of the contributing components are too similar, this method has limitations. Multivariate analysis of DOSY data, which is an attractive alternative, consists of decomposing the experimental data, into compound-specific diffusion decays and 1D NMR spectra. Multivariate analysis has been very successfully used for conventional DOSY data, but its use for SPEN DOSY data has only recently been reported. Here, we present a comparison, for SPEN DOSY data, of two widely used algorithms, SCORE and OUTSCORE, that aim at unmixing the spectra of overlapped species through a least square fit or a cross-talk minimisation, respectively. Data processing was performed with the General NMR Analysis Toolbox (GNAT), with custom-written code elements that now expands the capabilities, and makes it possible to import and process SPEN DOSY data. This comparison is demonstrated on three different two-component mixtures, each with different characteristics in terms of signal overlap, diffusion coefficient similarity, and component concentration.

What Is the Molecular Weight of "High" Molecular Weight Dissolved Organic Matter?

The use of ultrafiltration to isolate high molecular weight dissolved organic matter (HMWDOM) from seawater is a fundamental tool in the environmental organic chemist's toolbox. Yet, important characteristics of HMWDOM relevant to its origin and cycling, such as its molecular weight distribution, remain poorly defined. We used diffusion-ordered NMR spectroscopy coupled with mixed-mode chromatography to separate and characterize two major components of marine HMWDOM: acylpolysaccharides (APS) and high molecular weight humic substances (HS). The molecular weights (MWs) of APS and HS both fell within distinct, narrow envelopes; 2.0-16 kDa for APS and 0.9-6.5 kDa for HS. In water samples from the North Pacific Ocean the average MW of both components decreased with depth through the mesopelagic. However, the minimum MW of APS was >2 kDa, well above the molecular weight cutoff of the ultrafilter, suggesting APS removal processes below 2 kDa are highly efficient. The MW distribution of APS shows only small variations with depth, while the MW distribution of HS narrowed due to removal of HMW components. Despite the narrowing of the MW distribution, the concentration of HS did not decrease with depth between 15 and 915 m. This suggests that HMW HS produced in surface waters was either degraded into lower MW compounds without significant remineralization, or that HMW HS was remineralized but replaced by an additional source of HS in the mesopelagic ocean. Based on these results, we propose potential pathways for the production and removal of these major components of HMWDOM.

Study of the preparation, characterization, and solubility of lidocaine complexed with 5-sulfosalicylic acid dihydrate

Objective: This study was to prepare solid dispersions of lidocaine (Lid) with 5-sulfosalicylic acid dihydrate (SSA) by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1) and to evaluate their physical properties. Methods: Here, we evaluated the physicochemical properties and solubility of solid dispersions of Lid and SSA prepared by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1). Results: Differential scanning calorimetry measurements showed that after freeze-drying, the endothermic peak due to Lid melting, the dehydration peak, and the endothermic peak due to SSA melting disappeared. Powder X-ray diffraction results showed that the characteristic Lid and SSA peaks disappeared after freeze-drying, indicating a halo pattern. The near-infrared spectroscopy results suggested that Lid-derived –NH and –CH groups and the Lid-derived –OH and –CH groups from the SSA peak shifted and broadened after freeze-drying, suggesting their involvement in complex formation through Lid/SSA intermolecular interactions. Nuclear Overhauser effect spectroscopy-nuclear magnetic resonance (NMR) measurements showed a cross-peak due to the interaction between the Lid-derived –CH group and the SSA-derived –OH group, suggesting hydrogen bonding. Diffusion-ordered spectroscopy NMR measurements showed that the diffusion coefficients of Lid and SSA aggregated in FD Lid/SSA, suggesting a change in Lid dispersibility in the solvent owing to the formation of a complex with SSA. The solubility of FD Lid/SSA was approximately 88 mg/mL (∼20-fold higher than that of Lid). Conclusions: These findings suggest that complex formation occurred in FD Lid/SSA; this enhanced the solubility of this dispersion.

Predicting Molecular Weight Characteristics of Reductively Depolymerized Lignins by ATR-FTIR and Chemometrics.

Recent scientific advances in the valorization of lignin, through e.g., (partial-)catalytic depolymerization, require equally state-of-the-art approaches for the analysis of the obtained depolymerized lignins (DLs) or lignin bio-oils. The use of chemometrics in combination with infrared (IR) spectroscopy is one avenue to provide rapid access to pertinent lignin parameters, such as molecular weight (MW) characteristics, which typically require analysis via time-consuming size-exclusion methods, or diffusion-ordered NMR spectroscopy. Importantly, MW serves as a marker for the degree of depolymerization (or recondensation) that the lignin has undergone, and thus probing this parameter is essential for the optimization of depolymerization conditions to achieve DLs with desired properties. Here, we show that our ATR-IR-based chemometrics approach used previously for technical lignin analysis can be extended to analyze these more processed, lignin-derived samples as well. Remarkably, also at this lower end of the MW scale, the use of partial least-squares (PLS) regression models well-predicted the MW parameters for a sample set of 57 depolymerized lignins, with relative errors of 9.9-11.2%. Furthermore, principal component analysis (PCA) showed good correspondence with features in the regression vectors for each of the biomass classes (hardwood, herbaceous/grass, and softwood) obtained from PLS-discriminant analysis (PLS-DA). Overall, we show that the IR spectra of DLs are still amenable to chemometric analysis and specifically to rapid, predictive characterization of their MW, circumventing the time-consuming, tedious, and not generally accessible methods typically employed.

Using Nuclear Magnetic Resonance to Troubleshoot a Stability Issue in a Real-World Formulation Chassis-Application to Consumer Oral Healthcare.

With direct application to current and future consumer healthcare products, this research sheds light on the importance of packaging and its potential effects on both Active Pharmaceutical Ingredient (API) delivery and stability. Industrially sourced, proprietary experimental formulations (PEFs), specifically oral cleansers, based on salicylic acid and hydrogen peroxide, discolored over time at different rates, depending on packaging type used. This discoloration stemmed from an interplay of two factors, involving both spontaneous formulation degradation and the interaction of both degradants and salicylic acid with the internal surface of the packaging. This manuscript reports on the investigation to uncover the origins of discoloration. To investigate this real-world, industrial pipeline problem, we exploited the high dimensionality and simple sample preparation uniquely afforded by NMR. Using a combination of 1D/2D NMR and diffusion-ordered NMR spectroscopy (DOSY) to leverage molecular mass estimations from, we not only quickly confirmed the identities of these degradants, but also assessed their formation as a function of temperature and pH, providing insight into the mechanisms underlying their formation. We were able to identify catechol as the main source of discoloration over a period of several weeks, being formed at the ppm level. Furthermore, we evaluated the formulation-container interaction, employing NMR, ICP-MS, and ATR-IR. Despite this comprehensive analysis, the root causes of discoloration could only tentatively be assigned to a surface Ti complex of salicylic acid and other hydroxy carboxylic acids. Through the understanding of formulation degradation pathways, we were able to support further toxicology assessment, vital to both consumer safety and the manufacturer. This work underscores the invaluable role of NMR in the analysis of intricate proprietary mixtures with a consumer-centric purpose. Our findings demonstrate that conventional analytical techniques falter in the face of such complexity, requiring extensive preparation and pre-analytical processing, highlighting the novelty and crucial relevance of NMR research to manufacturers and consumers. Such an analysis is of value in the pursuit of materials within the consumer-healthcare space, which meet the requirements for successful recycling or re-use.

Spatially encoded pure-shift diffusion-ordered NMR spectroscopy yielded by chirp excitation

Spatially-encoded diffusion-ordered NMR spectroscopy (SPEN-DOSY) has emerged as a new time-efficient tool for the analysis of mixtures of small molecules in solution. Time efficiency is achieved using the concept of spatial parallelization of the effective gradient area, instead of the sequential incrementation used in conventional diffusion experiments. The data acquired with such sequences are then usually processed to extract diffusion coefficients, but cases when peak overlap in the 1H spectrum are difficult to address. Such limitation in conventional diffusion experiments is addressed via using the Pure Shift Yielded by CHirp Excitation (PSYCHE)-iDOSY sequence. Here we have adapted the PSYCHE-iDOSY sequence by using echo planar spectroscopic imaging (EPSI) to acquire SPEN-DOSY data. The pure shift mode of PSYCHE separates the overlapped components and a modified Stejskal-Tanner equation is used to extract the corresponding diffusion coefficient. The primary results obtained with the above-mentioned mixtures seem to open the possibility of separating complex mixtures in less time than PSYCHE-iDOSY.

Monitoring galactolipid digestion and simultaneous changes in lipid-bile salt micellar organization by real-time NMR spectroscopy

The use of Nuclear Magnetic Resonance spectroscopy for studying lipid digestion in vitro most often consists of quantifying lipolysis products after they have been extracted from the reaction medium using organic solvents. However, the current sensitivity level of NMR spectrometers makes possible to avoid the extraction step and continuously quantify the lipids directly in the reaction medium. We used real-time 1H NMR spectroscopy and guinea pig pancreatic lipase-related protein 2 (GPLRP2) as biocatalyst to monitor in situ the lipolysis of monogalactosyl diacylglycerol (MGDG) in the form of mixed micelles with the bile salt sodium taurodeoxycholate (NaTDC). Residual substrate and lipolysis products (monogalactosyl monoacylglycerol (MGMG); monogalactosylglycerol (MGG) and octanoic acid (OA) were simultaneously quantified throughout the reaction thanks to specific proton resonances. Lipolysis was complete with the release of all MGDG fatty acids. These results were confirmed by thin layer chromatography (TLC) and densitometry after lipid extraction at different reaction times. Using diffusion-ordered NMR spectroscopy (DOSY), we could also estimate the diffusion coefficients of all the reaction compounds and deduce the hydrodynamic radius of the lipid aggregates in which they were present. It was shown that MGDG-NaTDC mixed micelles with an initial hydrodynamic radius rH of 7.3 ± 0.5 nm were changed into smaller micelles of NaTDC-MGDG-MGMG of 2.3 ± 0.5 nm in the course of the lipolysis reaction, and finally into NaTDC-OA mixed micelles (rH of 2.9 ± 0.5 nm) and water soluble MGG. These results provide a better understanding of the digestion of galactolipids by PLRP2, a process that leads to the complete micellar solubilisation of their fatty acids and renders their intestinal absorption possible.

Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion.

The objective of this work is to evaluate the reprocessing of PLA 3D printing waste from different origins, into filaments and films, and without the addition of any additive. Two types of waste were considered: a blend of different printing wastes (masks, visors, other components) of personal protective equipment coming from an association of Spanish coronamakers, and PLA waste from a single known commercial source. Both types of materials were subjected to repeated extrusion cycles and processed into films by compression molding. Samples were characterized after each cycle and their mechanical and viscosity properties evaluated. Diffusion-ordered NMR spectroscopy (DOSY) experiments were also carried out to estimate molecular weights. The results show a better performance for the PLA waste from the known origin, capable of withstanding up to three re-extrusion cycles per two for the waste blending, without significant degradation. Additionally, a model to address collection and mechanical recycling cycles under two different scenarios (full traceability and not full traceability) was proposed.

Using surface plasmon resonance, capillary electrophoresis and diffusion-ordered NMR spectroscopy to study drug release kinetics

Nanomedicines, including polymer nanocarriers with controlled drug release, are considered next-generation therapeutics with advanced therapeutic properties and reduced side effects. To develop safe and efficient nanomedicines, it is crucial to precisely determine the drug release kinetics. Herein, we present application of analytical methods, i.e., surface plasmon resonance biosensor technology (SPR), capillary electrophoresis, and 1H diffusion-ordered nuclear magnetic resonance spectroscopy, which were innovatively applied for drug release determination. The methods were optimised to quantify the pH-triggered release of three structurally different drugs from a polymer carrier. The suitability of these methods for drug release characterisation was evaluated and compared using several parameters including applicability for diverse samples, the biological relevance of the experimental setup, method complexity, and the analysis outcome. The SPR method was the most universal method for the evaluation of diverse drug molecule release allowing continuous observation in the flow-through setting and requiring a small amount of sample.

Accounting for gradient non-uniformity in spatially-encoded diffusion-ordered NMR spectroscopy

Diffusion-ordered NMR spectroscopy (DOSY) is a powerful tool for the analysis of mixtures. Spatially-encoded (SPEN) DOSY makes it possible to collect a complete DOSY data set in a single scan, through spatial parallelisation of the gradient dimension. One limitation of current SPEN DOSY experiments is that the data is analysed assuming that the field gradient is uniform over the sample. This is usually not the case for high resolution NMR probes, and even less for triple-axis gradient probes. In this work, we have developed methods to account for gradient non-uniformity in the processing of SPEN DOSY experiment. We have first mapped the field gradient, using a stimulated echo (STE) NMR sequence with a weak readout gradient. We have then modified the calculation of the position-dependent effective gradient pulse area that is used in the analysis of SPEN DOSY data. The resulting model was validated through numerical simulations. A comparison of results obtained with and without inclusion of the effect of non-uniform gradients shows that the proposed approach increases the accuracy of SPEN DOSY experiments.

Mechanistic Investigations of Phenoxyimine-Cobalt(II)-Catalyzed C(sp2)-C(sp3) Suzuki-Miyaura Cross-Coupling.

The mechanism of phenoxyimine (FI)-cobalt-catalyzed C(sp2)-C(sp3) Suzuki-Miyaura cross-coupling was studied using a combination of kinetic measurements and catalytic and stoichiometric experiments. A series of dimeric (FI)cobalt(II) bromide complexes, [(4-CF3PhFI)CoBr]2, [(4-OMePhFI)CoBr]2, and [(2,6-diiPrPhFI)CoBr]2, were isolated and characterized by 1H and 19F NMR spectroscopies, solution and solid-state magnetic susceptibility, electron paramagnetic resonance (EPR) spectroscopy, X-ray crystallography, and diffusion-ordered NMR spectroscopy (DOSY). One complex, [(4-CF3PhFI)CoBr]2, was explored as a single-component precatalyst for C(sp2)-C(sp3) Suzuki-Miyaura cross-coupling. Addition of potassium methoxide to [(4-CF3PhFI)CoBr]2 generated the corresponding (FI)cobalt(II) methoxide complex as determined by 1H and 19F NMR and EPR spectroscopies. These spectroscopic signatures were used to identify this compound as the resting state during catalytic C(sp2)-C(sp3) coupling. Variable time normalization analysis (VTNA) of in situ catalytic 19F NMR spectroscopic data was used to establish an experimental rate law that was first-order in a (FI)cobalt(II) precatalyst, zeroth-order in the alkyl halide, and first-order in an activated potassium methoxide-aryl boronate complex. These findings are consistent with turnover-limiting transmetalation that occurs prior to activation of the alkyl bromide electrophile. The involvement of boronate intermediates in transmetalation was corroborated by Hammett studies of electronically differentiated aryl boronic esters. Together, a cobalt(II)/cobalt(III) catalytic cycle was proposed that proceeds through a "boronate"-type mechanism.

NMR Spectroscopy Study of the Effect of the Molecular Mass of Hypromellose Phthalate on Its Solubility

Scientific relevance. Hypromellose phthalate is used in enteric coatings for oral medicinal products. The proportion of phthalate groups in the polymer is standardised because it has a significant effect on solubility. Whereas, the molecular mass of hypromellose phthalate is not controlled, and its impact on solubility in media with different pH values is understudied.Aim. The study aimed to employ NMR spectroscopy to investigate the effect the molecular mass of hypromellose phthalate may have on the dissolution kinetics at the pH value declared by the polymer manufacturer.Materials and methods. The study analysed hypromellose phthalate isolated from proton-pump inhibitor enteric coatings and the hypromellose phthalate reference standard. The molecular mass of the polymer was estimated by diffusion-ordered NMR spectroscopy (DOSY) with polyethylene glycols of known molecular masses for calibration. The authors studied the dissolution profiles of hypromellose phthalates of different molecular masses using 1H NMR spectra.Results. The authors developed a procedure for estimating the average molecular mass of hypromellose phthalate by DOSY. The procedure showed variations in the molecular mass of the polymer in the test samples; the molecular mass scatter amounted to 10 kDa. The dissolution profile of the test samples in an aqueous buffer solution (pH 5.59) was described by a linear function during the first hour. The slope characterising the dissolution rate varied from 10° to 36°.Conclusions. The variation in the molecular mass of hypromellose phthalate significantly affects the dissolution rate of the test samples. The function of the dissolution rate against the molecular mass of hypromellose phthalate is non-linear. The article provides a compelling reason for further research to derive a correlation equation for the dissolution rate of hypromellose phthalate as a function of two variables (molecular mass and proportion of phthalate groups in the polymer).

Short-chain polyphosphates: Extraction effects on migration and size estimation of Saccharomyces cerevisiae extracts with polyacrylamide gel electrophoresis.

Polyacrylamide gel electrophoresis is commonly used to characterize the chain length of polyphosphates (polyP), more generally called condensed phosphates. After separation, nonradioactive, optical polyP staining is limited to chain lengths greater than 15 monomers with toluidine blue or 4',6-diamidino-2-phenylindole. PolyP chain lengths longer than 62 monomers were correlated to the shortest DNA ladders. In this study, synthetic linear polyPs (Sigma-Aldrich "Type 45", estimated mean length of 45 monomers), trimetaphosphate (trimetaP: 3 ring), tripolyphosphate (tripolyP), pyrophosphate (PPi ), and inorganic orthophosphate (o-Pi ) were visualized after separation by an in situ hydrolytic degradation process to o-Pi that was subsequently stained with methyl green. Statistically insignificant migration reduction of synthetic short-chain polyP after perchloric acid or phenol-chloroform extraction was confirmed with the Friedman test. 31 P diffusion-ordered NMR spectroscopy confirmed that extraction also reduced PPi diffusivity by <10%. Linear regression between the Rf peak migration value and the logarithm of synthetic polyP molecular weights enabled estimation of extracted polyP chain lengths from 2 to 45 monomers. Linear polyP extracts from Saccharomyces cerevisiae grown in aerobic conditions were generally shorter than extracts cultured in anaerobic conditions. Extractions from both aerobic and anaerobic S. cerevisiae included tripolyP and o-Pi , but no PPi .

Combination of Drug Delivery Properties of PAMAM Dendrimers and Cytotoxicity of Platinum(IV) Complexes-A More Selective Anticancer Treatment?

Based on their drug delivery properties and activity against tumors, we combined PAMAM dendrimers with various platinum(IV) complexes in order to provide an improved approach of anticancer treatment. Platinum(IV) complexes were linked to terminal NH2 moieties of PAMAM dendrimers of generation 2 (G2) and 4 (G4) via amide bonds. Conjugates were characterized by 1H and 195Pt NMR spectroscopy, ICP-MS and in representative cases by pseudo-2D diffusion-ordered NMR spectroscopy. Additionally, the reduction behavior of conjugates in comparison to corresponding platinum(IV) complexes was investigated, showing a faster reduction of conjugates. Cytotoxicity was evaluated via the MTT assay in human cell lines (A549, CH1/PA-1, SW480), revealing IC50 values in the low micromolar to high picomolar range. The synergistic combination of PAMAM dendrimers and platinum(IV) complexes resulted in up to 200 times increased cytotoxic activity of conjugates in consideration of the loaded platinum(IV) units compared to their platinum(IV) counterparts. The lowest IC50 value of 780 ± 260 pM in the CH1/PA-1 cancer cell line was detected for an oxaliplatin-based G4 PAMAM dendrimer conjugate. Finally, in vivo experiments of a cisplatin-based G4 PAMAM dendrimer conjugate were performed based on the best toxicological profile. A maximum tumor growth inhibition effect of 65.6% compared to 47.6% for cisplatin was observed as well as a trend of prolonged animal survival.

Soft Side of Aliphatic Polycarbonates: with PCHC-b-PDMS Copolymers toward Ductile Materials

Aliphatic polycarbonates based on CO2 and epoxides are a promising group of polymers due to the utilization of CO2 as a monomer combined with a versatile epoxide feedstock. To increase the attractiveness of these polymers as a material, the poor mechanical properties have to be improved. Herein, we present the synthesis of block copolymers from poly(cyclohexene carbonate) and poly(dimethyl siloxane) (PDMS), where diffusion-ordered NMR spectroscopy measurements indicate a successful synthesis of block structures. The resulting material shows an elongation at break of up to 24% in tensile testing with an incorporation ratio of only 27% PDMS in the copolymer. At the same time, a high tensile strength (27.9 MPa) and modulus of elasticity (1726 MPa) are observed.

Synthesis of Supramolecular A8 Bn Miktoarm Star Copolymers by Host-Guest Complexation.

We report a new synthetic method to construct supramolecular A8 Bn (n=1, 2, 4) miktoarm star copolymers by host-guest complexation between a resorcinarene-based coordination capsule possessing eight polystyrene chains and 4,4-diacetoxybiphenyl guest molecules that retain one, two or four polymethyl acrylate chains. The formation of the supramolecular A8 Bn (n=1, 2, 4) miktoarm star copolymers was confirmed by dynamic light scattering (DLS), size-exclusion chromatography (SEC), and diffusion-ordered NMR spectroscopy (DOSY). Differential scanning calorimetry (DSC) measurements revealed that the miktoarm copolymers were phase-separated in the bulk. The micro-Brownian motion of the A8 B4 structure was markedly enhanced in the bulk due to a weak segregation interaction between the immiscible arms.

1H DOSY analysis of high molecular weight acrylamide-based copolymer electrolytes using an inverse-geometry diffusion probe

Copolymers of [2-(acryloyloxy)ethyl]trimethylammonium chloride (AETAC) and acrylamide (AAm) (AETAC-co-AAm) are polyelectrolytes used as flocculants in wastewater purification. Diffusion-ordered two-dimensional NMR spectroscopy (DOSY) experiments for AETAC-co-AAm samples with Mw ranging from 1.9 to 3.9 million and a polyacrylamide sample with Mw of 1.3 million were carried out in pure D2O and in D2O containing 0.1 or 1 M NaCl using an inverse-geometry diffusion probe system. Projections of the DOSY contour plots onto the diffusion coefficient (D) dimension gave distributions of D for the AETAC and AAm units in the samples. The D values at the maximum point of the distribution (Dp) agreed fairly well with those determined by dynamic light scattering.

Perfluorocarbon emulsion enhances MR-ARFI displacement and temperature in vitro: Evaluating the response with MRI, NMR, and hydrophone.

Sonosensitive perfluorocarbon F8TAC18-PFOB emulsion is under development to enhance heating, increase thermal contrast, and reduce treatment times during focused ultrasound tumor ablation of highly perfused tissue. The emulsion previously showed enhanced heating during ex vivo and in vitro studies. Experiments were designed to observe the response in additional scenarios by varying focused ultrasound conditions, emulsion concentrations, and surfactants. Most notably, changes in acoustic absorption were assessed with MR-ARFI. Phantoms were developed to have thermal, elastic, and relaxometry properties similar to those of ex vivo pig tissue. The phantoms were embedded with varying amounts of F8TAC18-PFOB emulsion or lecithin-PFOB emulsion, between about 0.0-0.3% v:w, in 0.05% v:w increments. MR-ARFI measurements were performed using a FLASH-ARFI-MRT sequence to obtain simultaneous displacement and temperature measurements. A Fabry-Perot hydrophone was utilized to observe the acoustic emissions. Susceptibility-weighted imaging and relaxometry mapping were performed to observe concentration-dependent effects. 19F diffusion-ordered spectroscopy NMR was used to measure the diffusion coefficient of perfluorocarbon droplets in a water emulsion. Increased displacement and temperature were observed with higher emulsion concentration. In semi-rigid MR-ARFI phantoms, a linear response was observed with low-duty cycle MR-ARFI sonications and a mono-exponential saturating response was observed with sustained sonications. The emulsifiers did not have a significant effect on acoustic absorption in semi-rigid gels. Stable cavitation might also contribute to enhanced heating.

A Cleavable Self-Inclusion Conjugate with Enhanced Biocompatibility and Antitumor Bioactivity

A Cleavable Self-Inclusion Conjugate with Enhanced Biocompatibility and Antitumor Bioactivity