Diffusion Barrier Research Articles

Theoretical investigation of NbB as an electrode material for Li/Na-ion batteries

The utilization of MBenes as electrode materials for lithium/sodium-ion batteries (LIBs/NIBs) has emerged as a prominent research area. The potential application of two-dimensional niobium boride (NbB) in LIBs/NIBs was explored through first-principles calculations. The results indicate that the monolayer of NbB exhibits exceptional dynamic stability, thermodynamic stability and electrical conductivity. The migration path of Li/Na on the NbB surface was determined, revealing diffusion barriers as low as 0.034 and 0.017 eV respectively, indicating the exceptional mobility and reversibility exhibited by NbB. The theoretical capacities of Li and Na on NbB are 258 and 323 mAh g−1, respectively. The open circuit voltage (OCV) varies within the range of 0.58 to 0.71 V and 0.05 to 0.81 V for Li/Na concentrations. Meanwhile, the investigation into the influence of various functional groups of NbB on the adsorption properties of Li/Na atoms reveals that both NbBO and NbBS surfaces retain their maximum capacity for Li/Na adsorption, whereas the NbBSe surface fails to achieve complete layer adsorption of Li/Na atoms. The introduction of the S functional groups not only maintains the ultra-low diffusion barrier (0.09 eV) of Na ions but also results in a significant decrease in the average OCV of Li/Na adsorption, which is approximately 0.37 and 0.14 V, respectively. The electrochemical properties of NbB in LIBs/NIBs are exceptional, positioning it as a promising electrode material within the MBenes family.

Structural Engineering of Metal‐Organic Frameworks for Efficient CO2 Reduction Reaction

AbstractMetal‐organic framework (MOF) materials have attracted much attention due to their diverse topological structures, excellent adsorption capacity, and unique physicochemical properties, which hold great promise in catalytic CO2 reduction reaction (CO2RR). However, the original MOFs materials have disadvantages such as poor electrical conductivity, high diffusion barrier and limited accessible catalytic sites, which seriously limit their application in CO2RR. Therefore, many structural engineering strategies have been used to improve the CO2RR performance of the MOFs materials. In this review, we mainly review the four main structure engineering strategies, i. e. crystal engineering, 2D engineering, heterostructure engineering and MOF derivatives engineering, in enhancing the catalytic CO2RR performance of the MOFs. We hope that this review will not only provide insights for the rational design of efficient MOFs materials for the CO2RR, but also stimulate more research work in this field.

Investigation of cathode properties of two-dimensional NbS2Cl2 for Li and Na-ion batteries using density functional theory

Exploring novel two-dimensional materials (2D) for electrode and electrochemical storage applications stands as a pivotal pursuit in advancing renewable energy technologies. While recent research has predominantly focused on anode materials, cathode materials have received comparatively lesser attention. This study delves into the potential cathode applications of the novel two-dimensional material NbS2Cl2 using density functional theory. Fundamental properties, encompassing electronic and thermodynamic attributes, were scrutinized to comprehend the material’s characteristics. Our investigation extended to examining the adsorption and diffusion properties of these electrode materials. Comprehensive calculations of mechanical and thermodynamic properties reaffirmed the stability of this system. Upon adsorption of Li/Na atoms, the conducting nature emerged, evident through charge density difference and projected density of states. Our findings notably reveal minimal diffusion barriers of 1.5 eV and 0.35 eV for Li and Na atoms. Moreover, the observed open circuit voltages for adsorbed Li and Na ions were 4.69 V and 2.62 V, respectively. The calculated theoretical capacity for adsorbed Li-ion on 2D-NbS2Cl2 is 400 mAh g−1, while for Na-ion adsorption, it is 353 mAh g−1, awaiting validation through future experimental verifications.

Exceptionally Stable Cobalt Nanoclusters on Functionalized Graphene

To improve reactivity and achieve a higher material efficiency, catalysts are often used in the form of clusters with nanometer dimensions, down to single atoms. Since the corresponding properties are highly structure‐dependent, a suitable support is thus required to ensure cluster stability during operating conditions. Herein, an efficient method to stabilize cobalt nanoclusters on graphene grown on nickel substrates, exploiting the anchoring effect of nickel atoms incorporated in the carbon network is presented. The anchored nanoclusters are studied by in situ variable temperature scanning tunneling microscopy at different temperatures and upon gas exposure. Cluster stability upon annealing up to 200 °C and upon CO exposure at least up to 1 × 10−6 mbar CO partial pressure is demonstrated. Moreover, the dimensions of the cobalt nanoclusters remain surprisingly small (<3 nm diameter) with a narrow size distribution. Density functional theory calculations demonstrate that the interplay between the low diffusion barrier on graphene on nickel and the strong anchoring effect of the nickel atoms leads to the increased stability and size selectivity of these clusters. This anchoring technique is expected to be applicable also to other cases, with clear advantages for transition metals that are usually difficult to stabilize.

Influence of Hf Doping on the Oxygen Behaviors on ZrCo(110) Surface Using First-Principles Calculation

ZrCo alloy is easily poisoned by impurity gases such as O2, CO, and CO2, resulting in a deterioration in hydrogen storage performance. In this study, we conducted a comprehensive investigation into the adsorption and dissociation characteristics of oxygen on the ZrCo(110) surface using first-principles calculations. Previous studies indicated that the anti-disproportionation properties of ZrCo alloy can be significantly improved by Hf substitution, but the effect of Hf doping on the anti-poisoning properties has not been reported. We also examined the effect of Hf doping on the adsorption, dissociation, and diffusion characteristics of oxygen. It is found that on the ZrCo(110) surface, O2 molecules are easily dissociated and then stably adsorbed at the hollow site. Oxygen atoms will fill the surface preferentially and then diffuse inward. The doping of Hf has an insignificant impact on the adsorption or dissociation behavior of oxygen in comparison to the pure ZrCo surface. However, a notable observation is that the doping of Hf resulted in a reduction in the diffusion barrier for oxygen from the surface to the subsurface by 0.61 eV. Consequently, our study suggests that doping Hf is not an advisable strategy for improving the ZrCo(110) surface’s resistance to O2 poisoning because of improved oxygen permeability.

An autotransferable alloy overlayer toward stable sodium metal anodes.

Sodium (Na) metal anodes receive significant attention due to their high theoretical specific energy and cost-effectiveness. However, the high reactivity of Na foil anodes and the irregular surfaces have posed challenges to the operability and reliability of Na metals in battery applications. In the absence of inert environmental protection conditions, constructing a uniform, dense, and sodiophilic Na metal anode surface is crucial for homogenizing Na deposition, but remains less-explored. Herein, we fabricated a Tin (Sn) nanoparticle-assembled film conforming to separator pores, which provided ample space for accommodating volumetric expansion during the Na alloying process. Subsequently, a seamless Na-Sn alloy overlayer was formed and transferred onto the Na foil during Na plating through a separator-assisted technique, thereby overcoming conventional operational limitations of metallic Na. As compared to traditional volumetrically expanded cracked ones, the present autotransferable, highly sodiophilic, ion-conductive, and seamless Na-Sn alloy overlayer serves as uniform nucleation sites, thereby reducing nucleation and diffusion barriers and facilitating the compact deposition of metallic Na. Consequently, the autotransferable alloy layer enables a high average Coulombic efficiency of 99.9% at 3.0mAcm-2 and 3.0 mAh cm-2 in the half cells as well as minimal polarization overpotentials in symmetric cells, both during prolonged cycling 1200h. Furthermore, the assembled Na||Sn-1.0h-PP||Na3V2(PO4)3@C@CNTs full cell delivers high capacity retention of 97.5% after 200 cycles at a high cathodic mass loading.

Investigation of N C and B C bilayers as anode materials for Li-ion batteries by first-principles calculations.

The best choice today for a realistic method of increasing the energy density of a metal-ion battery is to find novel, effective electrode materials. In this paper, we present a theoretical investigation of the properties of hitherto unreported two-dimensional B C and N C bilayer systems as potential anode materials for lithium-ion batteries. The simulation results show that N C bilayer is not suitable for anode material due to its thermal instability. On the other hand B C is stable, has good electrical conductivity, and is intrinsically metallic before and after lithium intercalation. The low diffusion barrier (0.27 eV) of Li atoms shows a good charge and discharge rate for B C bilayer. Moreover, the high theoretical specific capacity (579.57 mAh/g) connected with moderate volume expansion effect during charge/discharge processes indicates that B C is a promising anode material for Li-ion batteries.

Defects in diffusion barrier function of ciliary transition zone caused by ciliopathy variations of TMEM218.

Primary cilia are antenna-like structures protruding from the surface of various eukaryotic cells, and have distinct protein compositions in their membranes. This distinct protein composition is maintained by the presence of the transition zone (TZ) at the ciliary base, which acts as a diffusion barrier between the ciliary and plasma membranes. Defects in cilia and the TZ are known to cause a group of disorders collectively called the ciliopathies, which demonstrate a broad spectrum of clinical features, such as perinatally lethal Meckel syndrome (MKS), relatively mild Joubert syndrome (JBTS), and nonsyndromic nephronophthisis (NPHP). Proteins constituting the TZ can be grouped into the MKS and NPHP modules. The MKS module is composed of several transmembrane proteins and three soluble proteins. TMEM218 was recently reported to be mutated in individuals diagnosed as MKS and JBTS. However, little is known about how TMEM218 mutations found in MKS and JBTS affect the functions of cilia. In this study, we found that ciliary membrane proteins were not localized to cilia in TMEM218-knockout cells, indicating impaired barrier function of the TZ. Furthermore, the exogenous expression of JBTS-associated TMEM218 variants but not MKS-associated variants in TMEM218-knockout cells restored the localization of ciliary membrane proteins. In particular, when expressed in TMEM218-knockout cells, the TMEM218(R115H) variant found in JBTS was able to restore the barrier function of cells, whereas the MKS variant TMEM218(R115C) could not. Thus, the severity of symptoms of MKS and JBTS individuals appears to correlate with the degree of their ciliary defects at the cellular level.

Superionic fluoride gate dielectrics with low diffusion barrier for two-dimensional electronics.

Exploration of new dielectrics with a large capacitive coupling is an essential topic in modern electronics when conventional dielectrics suffer from the leakage issue near the breakdown limit. Here, to address this looming challenge, we demonstrate that rare-earth metal fluorides with extremely low ion migration barriers can generally exhibit an excellent capacitive coupling over 20 μF cm-2 (with an equivalent oxide thickness of ~0.15 nm and a large effective dielectric constant near 30) and great compatibility with scalable device manufacturing processes. Such a static dielectric capability of superionic fluorides is exemplified by MoS2 transistors exhibiting high on/off current ratios over 108, ultralow subthreshold swing of 65 mV dec-1 and ultralow leakage current density of ~10-6 A cm-2. Therefore, the fluoride-gated logic inverters can achieve notably higher static voltage gain values (surpassing ~167) compared with a conventional dielectric. Furthermore, the application of fluoride gating enables the demonstration of NAND, NOR, AND and OR logic circuits with low static energy consumption. In particular, the superconductor-insulator transition at the clean-limit Bi2Sr2CaCu2O8+δ can also be realized through fluoride gating. Our findings highlight fluoride dielectrics as a pioneering platform for advanced electronic applications and for tailoring emergent electronic states in condensed matter.

Enhancing the combustion of nAl with AlF3 coating: gas-solid reaction mechanism for reducing combustion agglomeration of Al powder.

The combustion agglomeration of nano-aluminum (nAl) powder leads to incomplete combustion, which seriously hinders its application as metal fuel. In this work, nAl@AlF3 composites were produced by coating nAl with AlF3via a facile chemical deposition method. TEM and SEM analyses indicated that the AlF3 layer was evenly coated on the surface of nAl with a thickness of 4.6-9.1 nm, thereby varying the quantity of AlF3 applied. Experimental results from combustion indicated that the prepared nAl@AlF3 composites exhibit superior combustion efficiency, a higher combustion rate, and reduced combustion agglomeration as compared to raw nAl. Contrary to the widely accepted explanation that volatilization of AlF3 hinders Al combustion agglomeration, we proved that the gas-solid reaction between nAl and AlF3 plays an important role in inhibiting the sintering of nAl particles produced. The gaseous intermediate (i.e., AlOF and HF) released from the hydrolysis of AlF3 could reduce the diffusion barrier of Al2O3 to facilitate the reaction of Al core, which enhances the combustion reaction kinetics. More importantly, these gaseous products actively participate in the reaction cycle to continuously exert their catalytic effects.

β12-Borophene/Graphene Heterostructure as a High-Performance Anode Material for Li-Ion Batteries.

In the world of two-dimensional (2D) materials, various Borophene allotropes have gained significant attention for their remarkable specific capacity. However, the instability of monolayers has challenged experimental investigations of innovative approaches. Due to this limitation, in this work, graphene was investigated as a sublayer with the aim of providing stability to the β12-borophene monolayer. This study delves into the potential of a novel β12-borophene/graphene (β12-B/G) van der Waals (vdW) heterostructure using Quantum Espresso software based on vdW-corrected density functional theory. Our investigation includes exploring thermal and dynamical stability, adsorption energy, open circuit voltage, specific capacity, and diffusion barrier energy properties. Impressively, the calculated specific capacity reached 907 mAh/g, outperforming other 2D materials and heterostructures. The combination of a graphene layer not only ensures dynamical stability but also provides the adsorption energy of lithiumon the β12-borophene layer, simultaneously decreasing the diffusion barrier energy in comparison with the β12-borophene monolayer. The calculated open circuit voltage falls in the range 0.08-1.09 V, rendering it suitable for an overall average commercial voltage. For the borophene layer, the computed diffusion barrier energies are approximately 0.52 and 0.78 eV. Collectively, these findings underscore the potential of theβ12-B/G heterostructure as an advanced anode material for lithium-ion batteries.

The GPAT4/6/8 clade functions in Arabidopsis root suberization nonredundantly with the GPAT5/7 clade required for suberin lamellae

Lipid polymers such as cutin and suberin strengthen the diffusion barrier properties of the cell wall in specific cell types and are essential for water relations, mineral nutrition, and stress protection in plants. Land plant-specific glycerol-3-phosphate acyltransferases (GPATs) of different clades are central players in cutin and suberin monomer biosynthesis. Here, we show that the GPAT4/6/8 clade in Arabidopsis thaliana, which is known to mediate cutin formation, is also required for developmentally regulated root suberization, in addition to the established roles of GPAT5/7 in suberization. The GPAT5/7 clade is mainly required for abscisic acid-regulated suberization. In addition, the GPAT5/7 clade is crucial for the formation of the typical lamellated suberin ultrastructure observed by transmission electron microscopy, as distinct amorphous globular polyester structures were deposited in the apoplast of the gpat5 gpat7 double mutant, in contrast to the thinner but still lamellated suberin deposition in the gpat4 gpat6 gpat8 triple mutant. Site-directed mutagenesis revealed that the intrinsic phosphatase activity of GPAT4, GPAT6, and GPAT8, which leads to monoacylglycerol biosynthesis, contributes to suberin formation. GPAT5/7 lack an active phosphatase domain and the amorphous globular polyester structure observed in the gpat5 gpat7 double mutant was partially reverted by treatment with a phosphatase inhibitor or the expression of phosphatase-dead variants of GPAT4/6/8. Thus, GPATs that lack an active phosphatase domain synthetize lysophosphatidic acids that might play a role in the formation of the lamellated structure of suberin. GPATs with active and nonactive phosphatase domains appear to have nonredundant functions and must cooperate to achieve the efficient biosynthesis of correctly structured suberin.

Rational Regulation of High-Voltage Stability in Potassium Layered Oxide Cathodes.

Layered oxide cathode materials may undergo irreversible oxygen loss and severe phase transitions during high voltage cycling and may be susceptible to transition metal dissolution, adversely affecting their electrochemical performance. Here, to address these challenges, we propose synergistic doping of nonmetallic elements and in situ electrochemical diffusion as potential solution strategies. Among them, the distribution of the nonmetallic element fluorine within the material can be regulated by doping boron, thereby suppressing manganese dissolution through surface enrichment of fluorine. Furthermore, in situ electrochemical diffusion of fluorine from the surface into the bulk of the materials after charging reduces the energy barrier of potassium ion diffusion while effectively inhibiting irreversible oxygen loss under high voltage. The modified K0.5Mn0.83Mg0.1Ti0.05B0.02F0.1O1.9 layered oxide cathode exhibits a high capacity of 147 mAh g-1 at 50 mA g-1 and a long cycle life of 2200 cycles at 500 mA g-1. This work demonstrates the efficacy of synergistic doping and in situ electrochemical diffusion of nonmetallic elements and provides valuable insights for optimizing rechargeable battery materials.

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys.

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

Strategies for Achieving Ultra‐Long ORR Durability—Rh Activates Interatomic Interactions in Alloys

AbstractThe stability of platinum‐based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh‐doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh−Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt−1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long‐term testing has shown direct inhibition of Co dissolution in Rh−Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long‐term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm−2 for Rh−Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long‐term stability of the alloy over the course of the cycle.

A Membrane-Free Rechargeable Seawater Battery Unlocked by Lattice Engineering.

Seawater batteries that directly utilize natural seawater as electrolytes are ideal sustainable aqueous devices with high safety, exceedingly low cost, and environmental friendliness. However, the present seawater batteries are either primary batteries or rechargeable half-seawater/half-nonaqueous batteries because of the lack of suitable anode working in seawater. Here, a unique lattice engineering to unlock the electrochemically inert anatase TiO2 anode to be highly active for the reversible uptake of multiple cations (Na+, Mg2+, and Ca2+) in aqueous electrolytes is demonstrated. Density functional theory calculationsfurther reveal the origin of the unprecedented charge storage behaviors, which can be attributed to the significant reduction of the cations diffusion barrier within the lattice, i.e., from 1.5 to 0.4eV. As a result, the capacities of anatase TiO2 with 2.4% lattice expansion are ≈100 times higher than the routine one in natural seawater, and ≈200 times higher in aqueous Na+ electrolyte. The finding will significantly advance aqueous seawater energy storage devices closer to practical applications.

Defect engineering modulated MoSe2 cathode achieves highly effective photo-responsive zinc ion battery

Photo-responsive batteries coupled with solar energy collection, conversion, and storage are promising power sources for the next generation. Dual-function photocathode with high photo-responsive characteristics and energy storage capacity to simultaneously collect and store solar energy is an ideal technological tool. However, low photoelectric conversion efficiency, carrier recombination, and poor electrical conductivity have restricted the development of dual-functional photocathodes. Herein, molybdenum selenide with selenium vacancies (named as MoSe2-VSe) is designed as a photocathode for photo-responsive zinc ion batteries. The specific capacity increased from 186.2 mAh g−1 to 234.7 mAh g−1 under visible light (1 Sun) of 0.1 A g−1. At the current density of 0.1 A g−1, the photoelectric conversion efficiency reaches 0.58 %. Notably, the photo-responsive Zn-ion battery exhibits a photo self-charging voltage of 0.98 V after 6 h illumination. The results show that the photocathode with Se vacancies can promote electron transboundary movement, reduce carrier recombination, and decrease the diffusion barrier of zinc ions. This work presents an encouraging and effective strategy for designing dual-function photocathodes and lays the foundation for the development of photo-responsive batteries.

Flexible lithium selective composite membrane for direct lithium extraction from high Na/Li ratio brine

Monovalent selective ion-exchange membranes have been widely used for lithium extraction from brine with a high Mg/Li ratio. However, extracting Li+ directly from raw brine with high Na/Li ratio remains a significant challenge. This study introduces a flexible lithium selective composite membrane by incorporating lithium-ion conductor with a quaternized polymer. The lithium-ion conductor provides pathways for lithium transmission, while the quaternized polymer effectively hinders the leakage of impurity cations. As a result, with the applied voltage of 2.0 V, the membrane achieved a high Li+/Na+ separation coefficient of 35.48 with a Li+ flux of 8.33 × 10−10 mol cm−2 s−1 in the simulated Yiliping brine, which are 56.3 and 2.8 times higher than that of commercial monovalent selective cation exchange membrane (CIMS). We proposed a lithium transport mechanism involving an adsorption-dehydration-diffusion process through the membrane. Theoretical calculations indicate that the combined effects of significant adsorption energy (−0.47 eV), low dehydration energy (515 kJ mol−1), and low diffusion barrier (0.37 eV) leads to the high selectivity for lithium. These findings provide promising prospects for the large-scale preparation of lithium ion-selective membranes, enabling the direct lithium extraction from raw brine.

Phase Evolution of Multi-Metal Dichalcogenides With Conversion-Alloying Hybrid Mechanism for Superior Lithium Storage.

Traditional lithium-ion battery (LIB) anodes, whether intercalation-type like graphite or alloying-type like silicon, employing a single lithium storage mechanism, are often limited by modest capacity or substantial volume changes. Here, the kesterite multi-metal dichalcogenide (CZTSSe) is introduced as an anode material that harnesses a conversion-alloying hybrid lithium storage mechanism. Results unveil that during the charge-discharge processes, the CZTSSe undergoes a comprehensive phase evolution, transitioning from kesterite structure to multiple dominant phases of sulfides, selenides, metals, and alloys. The involvement of multi-components facilitates electron transport and mitigates swelling stress; meanwhile, it results in formation of abundant defects and heterojunctions, allowing for increased lithium storage active sites and reduced lithium diffusion barrier. The CZTSSe delivers a high specific capacity of up to 2266mA h g-1 at 0.1 A g-1; while, maintaining a stable output of 116mA h g-1 after 10000 cycles at 20 A g-1. It also demonstrates remarkable low-temperature performance, retaining 987mA h g-1 even after 600 cycles at -40°C. When employed in full cells, a high specific energy of 562Wh kg-1 is achieved, rivalling many state-of-the-art LIBs. This research offers valuable insights into the design of LIB electrodes leveraging multiple lithium storage mechanisms.

Unveiling potential of thiophene-functionalized C3N3 nanosheet as an anode for Li-ion batteries: A DFT-D3 study

Covalent triazine frameworks (CTFs) are a fascinating type of porous organic materials that exhibit numerous distinct features, such as significant specific surface area, outstanding chemical/thermal stability, and structural modifiability at the molecular level. These features make CTFs highly appealing for utilization in Li-ion batteries (LIBs). However, their low electronic conductivity limits their practical applications. In the present study, the potential anode application of thiophene-functionalized C3N3 nanosheet for LIBs was conducted by dispersion-corrected density functional theory (DFT-D3) calculations. It was found that functionalization of the C3N3 nanosheet with six thiophene groups ((THP)6@C3N3) led to the highest reduction (0.19 eV) in the energy gap of the pristine C3N3 nanosheet. A single Li-ion preferably adsorbs between two nitrogen atoms of the triazine ring with an adsorption energy of about 4.59 eV. The absorption of Li-ion resulted in a reduction of the band gap from 1.37 eV to 0.43 eV, indicating enhanced electrical conductivity and superior cycle stability. The fully loaded functionalized nanosheet with nineteen Li-ions at various adsorption sites exhibited a remarkable theoretical specific capacity of 526.55 mAh/g. This configuration also displayed a low open-circuit voltage (0.09 V) and diffusion energy barrier (0.35 eV), ideal as an anode with a rapid charging/discharging rate. Therefore, thiophene-functionalized C3N3 nanosheet demonstrates superior anode performance for LIBs due to its high theoretical specific capacity, small diffusion barrier, and low working voltage. This work can provide insights for the refere development of CTF-based anode materials.