Diffuse Reflectance Research Articles

Modulating Electronic Structure of MoS2 nanosheets by Sulfide‐Enrichment‐Induced Vacancies for Enhanced Photocatalytic Hydrogen Production

Enhancing photocatalytic activity by changing the electronic structure of the catalyst is an effective strategy. 2H‐MoS2 has semiconductor properties, and its unsaturated side S atom is the main active site for its photocatalytic activity. However, due to the weak S‐H bond energy, its hydrogen adsorption capacity is weak. In this work, the electronic structure of MoS2 is adjusted by S‐rich treatment, resulting in the formation of Mo vacancy (MoS2‐VMo). The level of Mo vacancies was assessed using UV‐visible diffuse reflectance spectroscopy (UV‐vis DRS). As these vacancies can capture certain photogenerated electrons, thereby reducing the recombination of electron‐hole pairs. Through DFT calculation, it is found that the anti‐bonding orbital electron filling of MoS2‐VMo is weakened, the bond energy of S‐Mo bond is weakened, and the bond energy between S‐H bond is enhanced, which is more conducive to proton adsorption. The photocatalytic activity for hydrogen evolution of MoS2‐3, which underwent the optimal S‐rich treatment, achieved a remarkable rate of 2404.6 μmol g‐1 h‐1 in dye eosin Y (EY) sensitization system, significantly surpassing that of MoS2 lacking the S‐enriched treatment. This study introduces a novel concept for enhancing the photocatalytic hydrogen evolution performance of metal sulfides via defect engineering.

Facile synthesis and characterization of zinc molybdate (ZnMoO4) nanosheets for electrochemical supercapacitor application

Abstract This study explores the synthesis and characterization of zinc molybdate (ZnMoO4) nanosheets with emphasis on their potential application for energy storage devices particularly supercapacitors. The synthesis of ZnMoO4 nanosheets was done through co-precipitation followed by examination of their structure, morphology, optical, thermal behaviour and electrochemical performance by various characterization techniques. X-ray diffraction (XRD) analysis confirmed that the formation of monoclinic ZnMoO4 phase with the average crystallite size 17.93 nm. Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) revealed that this material had nanosheets-like structure which helps to increase ion transport and surface area; these two factors are essential for enhancing the material’s supercapacitor efficacy. The semiconductor characteristics were determined using UV–Visible diffuse reflectance spectroscopy (UV-DRS) which indicated a band gap energy of 4.2 eV. Fourier transform infrared (FTIR) analysis confirmed that the presence of Zn–O and Mo–O bonds in their crystal lattice. Thermogravimetric analysis (TGA) showed that the ZnMoO4 nanosheets had thermal stability since they experienced only a slight mass loss of 2.57 % up to 800 °C. Cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) tests were undertaken to find out the specific capacitance and the value is 618 F g⁻1 at a current density of 1 A g⁻1.

Achieving High Photocatalytic NOx Removal Activity Using a Bi/BiOBr/TiO2 Composite Photocatalyst.

Fossil fuel combustion generates nitrogen oxides (NO + NO2 = NOx), which pose threats to the environment and human health. Although commercial products containing titanium dioxide (TiO2) can remedy NOx pollution by photocatalysis, they only function in the ultraviolet (UV). On the other hand, bismuth oxybromide (BiOBr) is active in the visible. BiOBr is stable, affordable, and non-toxic, making it an appealing alternative. In addition, nanoparticulate Bi metal can further enhance visible light absorption through its surface plasmon properties and charge carrier lifetime by spatially separating charge. In this study, to enhance the visible-light activity of TiO2-based photocatalysts for NOx pollution, a composite of Bi-decorated BiOBr/TiO2 was synthesized using a solvothermal method across varying the Ti/Bi atomic ratio (0.2, 2.2, 4.4, and 6.6), and synthesis duration (6h, 12h, and 18h). The photocatalytic performance of the synthesised composites for NO gas removal was investigated using an adapted ISO method (22197-1:2016). Analysis showed that the preferential growth of the (010) crystal facet in BiOBr and the presence of Bi metal both play an important role in the superior photocatalytic activity seen in our Bi-decorated BiOBr/TiO2 composite. The composites were characterised using X-ray diffraction (XRD), attenuated total reflectance - Fourier transform infrared spectroscopy (ATR-FTIR), high-resolution scanning electron microscopy (HRSEM), UV-Vis diffuse reflectance (DRS) spectroscopy, transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, Brunauer-Emmett-Teller (BET) analysis, thermogravimetric analysis (TGA), and diffuse reflectance transient absorption spectroscopy (DR-TAS). Our research shows that the Bi/BiOBr-TiO2 composite synthesised through the 12-hour solvothermal method with a Ti/Bi atomic ratio of 4.4 exhibits the highest photocatalytic performance towards both NO and NO2 oxidation; with 32.8% and 54.9% NO removal and 15.1% and 29.5% NO2 under visible and UV lamps, respectively.

Estimating retinal blood oxygenation from diffuse reflectance spectra of semi-infinite tissue using principal component analysis

Estimating retinal blood oxygenation from diffuse reflectance spectra of semi-infinite tissue using principal component analysis

Visible light sensitive BiVO4–TiO2 nanocomposites for photocatalytic dye degradation

Abstract The hydrothermal approach was used to prepare visible light active BiVO4–TiO2 nanosheet composites in varying molar ratios. The photoluminescence (PL) spectrum, X-ray photoelectron spectroscopy (XPS), UV-Visible Diffuse Reflectance Spectroscopy (DRS), Transmission electroscopy (TEM), Brunauer-Emmett-Teller (BET) and field emission scanning electron microscopy (FESEM), were used to analyze the photocatalysts and composites. Photocatalytic activity of BiVO4–TiO2 composites was investigated by decolorizing methylene blue. Out of four different molar ratio BiVO4–TiO2 composites with a molar ratio of 3:1 BiVO4 TiO2 composite showed enhanced photocatalytic activity which is further proved by photoluminescence investigation of coumarin and Scavenger test. The DRS of BiVO4 TiO2 composite showed red shift in optical absorption. The enhanced photocatalytic activity is due to minimizing electron hole recombination by making composite with TiO2.

Synthesis, Structure, and Properties of Dion–Jacobson Double‐Layered Perovskites A′SmNb2O7 (A′=Rb, K, Na, Li, H)

AbstractDion‐Jacobson‐type layered perovskite compounds A′SmNb2O7 (A′=Rb, K, Na, Li, H) were synthesized using solid‐state and ion‐exchange methods. While the parent solid‐state product RbSmNb2O7, has previously been studied, the ion‐exchanged compounds were obtained and studied for the first time. The phase and chemical purity of the compounds were confirmed by X‐ray diffraction (XRD) and energy‐dispersive X‐ray spectroscopy (EDX). The crystal structures of RbSmNb2O7 (I2 cm, a=0.54356(1) nm, b=0.53935(1) nm, c=2.1891(5) nm), KSmNb2O7 (I2 cm, a=0.53660(7) nm, b=0.54481(6) nm, c=2.1527(1) nm) and LiSmNb2O7 (B2 cm, a=0.54546(4) nm, b=0.53567(4) nm, c=2.04582(5) nm) were refined using the Rietveld method. Polyhedral distortions in these structures have been studied in detail. The thermal behavior of the compounds has been determined using differential thermal analysis (DTA), revealing that A′=Na, Li and H compounds are metastable hydrates, while A′=Rb and K compounds are stable. The optical band gap, valence band edge, and conduction band edge potentials of the compounds obtained were calculated using diffuse reflection spectroscopy data. A photocatalytic experiment was performed on the degradation of methylene blue under ultraviolet light. All of the samples obtained showed some asctivity in the reaction of dye photooxidation.

Humic Substances from Waste-Based Fertilizers for Improved Soil Fertility

This research explores how different organic waste transformation methods influence the production of humic substances (HSs) and their impact on soil quality. Using olive and orange wastes as substrates, the study compares vermicomposting, composting, and anaerobic digestion processes to determine which method produces the most humic-substance-rich products. The characterization of HSs in each product included analyses of total organic carbon (TOC), humic and fulvic acid content, humification rate, humification degree, and E4/E6 ratio, with HSs extracted using potassium hydroxide (KOH) and analyzed via Diffuse Reflectance Infrared Fourier-Transform (DRIFT) spectroscopy to assess structural complexity. The results revealed that the chemical composition of the input materials significantly influenced the transformation dynamics, with orange by-products exhibiting a higher humification rate and degree. Vermicomposting emerged as the most efficient process, producing fertilizers with superior humic content, greater microbial biodiversity, and enhanced cation exchange capacity, thus markedly improving soil quality. Composting also contributed to the stabilization of organic matter, albeit less effectively than vermicomposting. Anaerobic digestion, by contrast, resulted in products with lower levels of HSs and reduced nutrient content. Aerobic processes, particularly vermicomposting, demonstrated the most rapid and effective transformation, producing structurally complex, stable humus-like substances with pronounced benefits for soil health. These findings underscore vermicomposting as the most sustainable and efficacious approach for generating HS-rich organic fertilizers, presenting a powerful alternative to synthetic fertilizers. Furthermore, this study highlights the potential of organic waste valorization to mitigate environmental pollution and foster circular economy practices in sustainable agriculture.

Choose Your Dopant─Ultrananotitania Directing Photocatalytic Electron Destination.

Anatase titania photocatalysts are the subject of thousands of papers annually. Since the photoefficiency is low, doping TiO2 photocatalysts with various elements is a widely employed technique to enhance performance. However, studies involving different catalyst sizes, morphologies, or dopants often yield varied or even contradictory conclusions. Herein, we report a versatile platform based on ultranano, <2 nm, particles, that minimizes defects, produces uniform morphology, and enables systematic investigation of dopant control of product formation. Charge-carrier destination is determined by the redox couple in the oxide matrix; a couple that is measured by diffuse reflectance spectroscopy. Versatility is demonstrated via doping with all fourth-period transition elements (except Sc). For oxidation reactions, two distinct reaction pathways are identified; the balance between the pathways is regulated by the reduction potential of the dopant in the matrix. The prospect for directing charge transfer significantly expands potential applications for titania.

Different metal-doped NiO nanoparticles for sunlight-mediated degradation of low-density polyethylene microplastic films.

Due to the widespread use and incorrect handling of plastics, we need to find a practical and effective way to eliminate plastic waste from the environment. Different metal-doped nickel oxide (DMD-NiO) nanoparticles (NPs) were synthesized using a sol-gel technique and were used to degrade low-density polyethylene (LDPE) microplastic (MP) films when exposed to sunlight. The optical and structural properties of sol-gel method synthesized materials were investigated using a variety of characterization methods (Fourier transform infrared (FT-IR), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), X-ray diffractometer (XRD) analysis, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HR-TEM), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, and thermogravimetric analysis (TGA). Degradation study results suggest that the photocatalytic activity of DMD-NiO-LDPE nanocomposites (NCs) films was greater than that of pure LDPE and undoped NiO-LDPE films. Because of their increased optical absorption and efficient suppression of photo-produced charge carriers' recombination, the DMD-NiO NPs showed higher photocatalytic degradation of LDPE films. Thus, LDPE films with 2% wt Fe-NiO (iron-doped nickel oxide) nanomaterials showed a degradation of around 38.16% among DMD-NiO-LDPE NCs films under visible light over a short period of 30 days (240 h). The formation of carbonyl groups in the degradation product of LDPE was confirmed by Fourier transform infrared (FT-IR) analysis. When compared to the original LDPE film, the Fe-NiO-LDPE NCs films showed a significant decrease in crystallinity and carbonyl indexes, as much as 8.4% lower. The current project proposes the development of eco-friendly photocatalysts using a sol-gel technique for combating MP pollution in the environment.

Gallium Methylene Ga8(CH2)12 on Mesoporous Silica

Gallium methylene Ga8(CH2)12 was grafted onto large‐pore mesoporous silica SBA‐15500 and mesoporous silica MCM‐41500 with smaller mesopores, each thermally pretreated at 500 °C. For comparability reasons, trimethylgallium was employed as a grafting reagent. The hybrid materials Ga8(CH2)12@SBA‐15500, GaMe3@SBA‐15500, Ga8(CH2)12@MCM‐41500 and GaMe3@MCM‐41500 were characterized by ICP‐OES, N2 physisorption, elemental analysis, solid‐state 1H/13C/29Si NMR spectroscopy and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. To gain further insight into potential surface species, the molecular compound Ga8(CH2)12 was treated with excess (eight equivalents) of HOSi(OtBu)3, which gave the dimeric species [GaMe2{OSi(OtBu)3}]2, being isolable also from the reaction of GaMe3 with one equivalent of silanol. The hybrid materials revealed high metal contents and surface species with intact Ga–CH2–Ga linkages as proposed by NMR spectroscopy and their reactivity toward benzophenone.

Tunable Optical Properties and Relaxor Behavior in Ni/Ba Co-Doped NaNbO3 Ceramics: Pathways Toward Multifunctional Applications

In this study, Ni/Ba co-doped NaNbO3 ceramics (NBNNOx) were synthesized using a solid-state method to explore the effects of Ni2+ and Ba2+ ion substitution on the structural, optical, and dielectric properties of NaNbO3. X-ray diffraction (XRD) confirmed that the ceramics retained an orthorhombic structure, with crystallinity improving as the doping content (x) increased. Significant lattice distortions induced by the Ni/Ba co-doping were observed, which were essential for preserving the perovskite structure. Raman spectroscopy revealed local structural distortions, influencing optical properties and promoting relaxor behavior. Diffuse reflectance measurements revealed a significant decrease in band gap energy from 3.34 eV for undoped NaNbO3 to 1.08 eV at x = 0.15, highlighting the impact of co-doping on band gap tunability. Dielectric measurements indicated relaxor-like behavior at room temperature for x = 0.15, characterized by frequency-dependent anomalies in permittivity and dielectric loss, likely due to ionic disorder and structural distortions. These findings demonstrate the potential of Ni/Ba co-doped NaNbO3 ceramics for lead-free perovskite solar cells and other functional devices, where tunable optical and dielectric properties are highly desirable.

Incorporation of a Binuclear Cobalt Complex into MOFs for Photocatalytic CO2 Reduction with H2O as an Electron Donor.

The development of molecular composite photocatalysts for cost-effective, sacrificial-reagent-free CO2 reduction is desirable but challenging. Herein, we employed an in situ encapsulation strategy to encapsulate the binuclear cobalt complex (Co2L) within NH2-MIL-125 and synthesized a range of MOF-based composites with varying cobalt content for photocatalytic CO2 reduction. The photocatalytic results showed that the catalytic performance increased with the increase in Co2L content, reaching a rapid CO generation rate of 27.95 μmol·g-1·h-1, over 5 times that of bare NH2-MIL-125, with water as the electron donor instead of any organic sacrificial agent. This composite catalyst effectively harnesses the advantages of both molecular catalysts and MOFs, leveraging the superior catalytic activity of molecular catalysts while also capitalizing on the light absorption and water oxidation capabilities of MOFs, resulting in a remarkable ability for photocatalytic CO2 reduction. The photocatalytic mechanism involving electron transfer and CO2 activation has been revealed by photoluminescence spectroscopy, in situ X-ray photoelectron spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy, and other control experiments.

La-supported SnO2–CaO composite catalysts for efficient malachite green degradation under UV–vis light

This study presents the development and optimization of La@SnO2–CaO composite catalysts for efficient photocatalytic degradation of malachite green dye in aqueous solutions under UV–vis light irradiation. The catalysts were prepared via conventional incipient-wetness impregnation and thoroughly characterized using advanced analytical techniques, including X-ray diffraction, Fourier transform infrared spectroscopy, UV–vis diffuse reflectance spectroscopy, N2 adsorption–desorption analysis, and scanning electron microscopy. To optimize photodegradation efficiency, the effects of three independent factors were systematically investigated using response surface methodology: Temperature, pH, and Sn/Ca molar ratio. Our results reveal optimal conditions for maximum dye degradation: pH 7, Sn/Ca molar ratio of 0.33, and a process time of 35 min, resulting in a maximum photodegradation efficiency of 98.80% for malachite green dye. Notably, visible light exhibited a more pronounced effect on dye degradation compared to UV light over time, with visible light achieving 25% greater dye removal after 60 min of illumination. Furthermore, the catalyst showed excellent recyclability, retaining 85% of its initial activity after five consecutive cycles. These findings contribute significantly to the development of sustainable methods for dye removal from wastewater and highlight the potential of La@SnO2–CaO composite catalysts in environmental remediation processes, particularly in treating textile industry effluents.

Controllability of optical, electrical, and magnetic properties of synthesized Cd-doped MgFe2O4 nanostructure

This study explores the synthesis of cadmium-magnesium co-doped magnesium ferrite (Mg1+xCdxFe2–2xO4, 0.00 ≤ x ≤ 0.30, Δx = 0.05) via a citric acid-assisted sol-gel auto-combustion method. X-ray diffraction (XRD) analysis revealed crystal structure changes due to Cd and Mg co-doping, with the 0.25 Cd sample showing the smallest crystallite size and highest lattice strain. High-resolution transmission electron microscopy (HRTEM) confirmed the nanostructure and largest surface area for this sample. Diffuse reflectance spectra, analyzed using the Kubelka-Munk relation, indicated that the 0.25 Cd sample had the lowest energy gap (2.08 eV), supported by band position calculations. Electrical conductivity and charge transport mechanisms were examined at various temperatures. Magnetization studies showed reduced saturation magnetization at x = 0.25, ascribed to cation distribution changes and spin canting, with coercivity and anisotropy decreasing with higher Cd content. Overall, the 0.25 Cd sample exhibited optimized optical, electrical, and magnetic properties due to its distinct microstructure.

The global well-posedness of the relativistic Boltzmann equation with hard potentials and diffuse reflection boundary condition in bounded domains

The global well-posedness of the relativistic Boltzmann equation with hard potentials and diffuse reflection boundary condition in bounded domains

МЕТОД МОНТЕ-КАРЛО ДЛЯ РАСЧЕТА ХАРАКТЕРИСТИК СВЕТОВЫХ ПОЛЕЙ В МОРСКОЙ ВОДЕ

The development of numerical methods for solving the integro-differential radiation transfer equation remains a relevant task. Among them, we can highlight the Monte Carlo method, which is in demand in various niches of modern ocean optics. The purpose of this work is a clear and concise presentation of the basics of the forward Monte Carlo method of light fields modeling in seawater, accompanied by a detailed description of its software implementation. The basics of the method are described, the procedures for choosing the type of interaction, the mean free path and the direction of photon motion are described. A simple case is considered, corresponding to an infinitely distant point source of unpolarized light, the absence of atmospheric influence, a smooth air-seawater interface, and the absence of stratification of inherent optical properties. In this case, realistic values of the absorption and scattering coefficients were used, calculated in accordance with the Case 1 model for a chlorophyll concentration of 1 μg/L, and a strongly elongated Henyey-Greenstein phase function with the parameter g = 0.95. The Fresnel reflection of light from the air-seawater interface was taken into account. The relative errors in the values of the diffuse attenuation coefficient for downward irradiance K d and the diffuse reflectance R, calculated in the spectral range of 400–700 nm using 106 photons, in comparison with the HydroLight results were 1.5 % and 0.4 %, respectively. Spectral calculation on one core of a 2017 Intel Core i5-8250U mobile processor in MATLAB takes 6 minutes. An assessment of the choice of the optimal number of photons required to obtain the desired quantities with a given accuracy was made. The implemented method is useful for becoming familiar with the basic principles used to numerically solve the radiative transfer equation in seawater using statistical methods and is used in the “Ocean Optics” course, taught by the author to 4th year students of the Department of Thermohydromechanics of the Ocean at MIPT.

Theoretical and experimental investigation of BaY2(MoO4)4:xSm3+ phosphors

In this paper, the novel BaY2(MoO4)4:xSm3+ phosphors with strong red emission and high thermal stabilization were prepared by a conventional method of high temperature solid state reaction in air atmosphere. Morphology, phase purity, element distribution, UV–Vis–NIR diffuse reflectance spectroscopy (DRS), and luminescence properties were investigated in detail. The crystal structure of the BaY2(MoO4)4 host was refined with the aid of the Rietveld refinement method by the GSAS program. The electronic band structure and phonon dispersion were performed using plane-wave density functional theory (DFT). The prepared BaY2(MoO4)4:Sm3+ phosphor exhibits excellent red emission under near-ultraviolet excitation. Strong red emission intensity and high thermal stability suggest potential application in backlighting or phosphor-covered white light-emitting diodes (pc-LEDs).

Construction of Chiral Covalent Organic Frameworks Through a Linker Decomposition Chiral Induction Strategy for Circularly Polarized Light Detection

AbstractExploring new strategies for construction of chiral covalent organic frameworks (COFs) is of paramount importance yet remains a challenge. Herein, we report the rational design and construction of chiral COFs through a linker decomposition chiral induction (LDCI) strategy. Three pairs of azine‐linked chiral COFs are successfully synthesized by the condensation reactions of C3‐symmetric 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzaldehyde (Tz) with flexible chiral dihydrazide linkers derived from malic acid, aspartic acid and tartaric acid, respectively. Remarkably, upon complete or partial decomposition from flexible chiral dihydrazides to hydrazine during COF synthesis, the homochirality of these COFs, originating from the single‐handedness conformation of propeller‐like Tz cores, is well preserved. Such a stereoselective chiral memory realized via the LDCI strategy is confirmed by time‐dependent powder X‐ray diffraction (PXRD), Fourier transform infrared (FT‐IR) and diffuse reflectance circular dichroism (DRCD). Moreover, the resultant azine‐linked chiral COFs are used as the active materials to fabricate photodetectors to directly distinguish circularly polarized light (CPL), showing impressive recognition performances on the identification of left‐handed circularly (LHC) and right‐handed circularly (RHC) polarized lights. Notably, the residual undecomposed flexible chiral linkers within the COFs are found to be conducive to improving the polarization discrimination ratio. This work highlights LDCI as a new and effective strategy for constructing homochiral COFs with promising future in chiral optical application.

Phytomediated synthesis of WO3 nanoparticles using Solanum lycopersicum fruit extract for enhanced photocatalytic activity of 2,4-dichlorophenol

ABSTRACT In the present study, bio-citric acid/tungsten oxide (WO3) (BCAWO) nanoparticles (NPs) were prepared by using Solanum lycopersicum fruit extract as a reducing as well as a capping agent. The photocatalysts were characterized by UV–vis diffuse reflection spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), high-resolution transmission electron microscopy, and photoluminescence spectroscopy techniques. Diffraction peaks in the XRD spectrum were identified as the crystal planes of crystalline tungsten oxide. The BCAWO had an average size of 23.14 nm. For W–O bonds, the Fourier transform infrared spectrum displays the vibrational peak at 671.23 cm−1. A prominent absorption band was observed at 268 nm, indicating the 1.2 eV bandgap. Under xenon (Xe) lamp irradiation, the synthesized BCAWO nanoparticles showed notable photocatalytic degradation of 2,4-dichlorophenol (2,4-DCP), with a degradation rate of 96%. With BCAWO concentrations of 2.5 g/L, pH of 4, reaction period of 180 min, and 2,4 DCP concentration of 10 mg/L, the degradation of 2,4-DCP had the highest efficacy, 96%. The degradation of phenols in wastewater may be facilitated by using the green WO3 nanoparticles as a photocatalyst, according to the results.

Construction of Chiral Covalent Organic Frameworks Through a Linker Decomposition Chiral Induction Strategy for Circularly Polarized Light Detection

AbstractExploring new strategies for construction of chiral covalent organic frameworks (COFs) is of paramount importance yet remains a challenge. Herein, we report the rational design and construction of chiral COFs through a linker decomposition chiral induction (LDCI) strategy. Three pairs of azine‐linked chiral COFs are successfully synthesized by the condensation reactions of C3‐symmetric 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzaldehyde (Tz) with flexible chiral dihydrazide linkers derived from malic acid, aspartic acid and tartaric acid, respectively. Remarkably, upon complete or partial decomposition from flexible chiral dihydrazides to hydrazine during COF synthesis, the homochirality of these COFs, originating from the single‐handedness conformation of propeller‐like Tz cores, is well preserved. Such a stereoselective chiral memory realized via the LDCI strategy is confirmed by time‐dependent powder X‐ray diffraction (PXRD), Fourier transform infrared (FT‐IR) and diffuse reflectance circular dichroism (DRCD). Moreover, the resultant azine‐linked chiral COFs are used as the active materials to fabricate photodetectors to directly distinguish circularly polarized light (CPL), showing impressive recognition performances on the identification of left‐handed circularly (LHC) and right‐handed circularly (RHC) polarized lights. Notably, the residual undecomposed flexible chiral linkers within the COFs are found to be conducive to improving the polarization discrimination ratio. This work highlights LDCI as a new and effective strategy for constructing homochiral COFs with promising future in chiral optical application.