Diffuse Reflectance Infrared Fourier Transform Research Articles

Structure and Chemical Reactivity of Y-Stabilized ZrO2 Surfaces: Importance for the Water-Gas Shift Reaction.

The surface structure and chemical properties of Y-stabilized zirconia (YSZ) have been subjects of intense debate over the past three decades. However, a thorough understanding of chemical processes occurring at YSZ powders faces significant challenges due to the absence of reliable reference data acquired for well-controlled model systems. Here, we present results from polarization-resolved infrared reflection absorption spectroscopy (IRRAS) obtained for differently oriented, Y-doped ZrO2 single-crystal surfaces after exposure to CO and D2O. The IRRAS data reveal that the polar YSZ(100) surface undergoes reconstruction, characterized by an unusual, red-shifted CO band at 2132 cm-1. Density functional theory calculations allowed to relate this unexpected observation to under-coordinated Zr4+ cations in the vicinity of doping-induced O vacancies. This reconstruction leads to a strongly increased chemical reactivity and water spontaneously dissociates on YSZ(100). The latter, which is an important requirement for catalysing the water-gas-shift (WGS) reaction, is absent for YSZ(111), where only associative adsorption was observed. Together with a novel analysis scheme these reference data allowed for an operando characterisation of YSZ powders using DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy). These findings facilitate rational design and tuning of YSZ-based powder materials for catalytic applications, in particular CO oxidation and the WGS reaction.

Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium.

Mesoporous silicon nitride (Si3N4) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal-ligand orbital overlap. Here, tetrabenzyl zirconium (ZrBn4) was chemisorbed on Si3N4, and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C-H bond activation along the Zr-N bond, this material was found to be a highly active (1.53 molpropene molZr-1 h-1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.

Multiple effects of relative humidity on heterogeneous ozonolysis of cooking organic aerosol proxies from heated peanut oil emissions

The exposure to cooking organic aerosols (COA) is closely related to people's daily lives. Despite extensive investigations into COA's model compounds like oleic acid, the intricacies of heterogeneous ozonolysis of real COA and the effects of ambient conditions like humidity remain elusive. In this work, the ozonolysis of COA proxies from heated peanut oil emissions was investigated using diffuse reflectance infrared Fourier transform (DRIFTS) spectroscopy, and proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS). We found that humidity hinders the reaction between ozone and CC double bonds due to the competitive adsorption of water and ozone on COA. Although visible light has little influence on the ozonolysis of COA in the absence of humidity, the ozonolytic CO production is significantly promoted by visible light in the presence of humidity. It may be attributed to the formation of water-derived reactive oxygen species (ROS, mainly HO•) from the photosensitization of polycyclic aromatic hydrocarbons (PAHs) in COA. We also found that humidity can enhance the depolymerization of carboxylic acid dimers and hydrolysis of intrinsic acetals in the COA. Moreover, humidity promotes the release of VOCs during both the dark and light ozonolysis of COA. This work reveals the important roles of humidity-responsive and photo-responsive components in COA during its ozonolysis, and the change in VOC release may guide the control of human VOC exposure in indoor air.

Photocatalytic CO2 reduction of CuO-Zn1-xCuxO (ZCO)/Ti3C2Tx MXene heterojunctions with enhanced interfacial charge transfer

Photocatalytic CO2 reduction reaction (CO2RR) synthesis of recycled fuel is a promising pathway to assist the mitigating fossil fuel depletion. Finding efficient and inexpensive high performance CO2RR semiconductor photocatalysts is a giant challenge in the field of photocatalytic reduction. This work constructs the novel-designed interfacial Schottky junction of CuO-Zn1-xCuxO (ZCO)/Ti3C2Tx via electrostatic spinning and electrostatic self-assembly techniques. The catalysts exhibit tight contact heterogeneous interface companies with enhanced CO2 chemisorption capability and proved by various characterizations for efficient carrier separation and migration capacity. The optimized ZCO/Ti3C2Tx nanosheet composites significantly improved their photocatalytic performance. The best samples yielded 5.855 and 2.518 μmol g−1 h−1 of CO and CH4, which are 6 and 1.73 times higher than the conversion of ZCO, respectively, and maintain stability after four cycles without the use of sacrificial agents. In addition, the mechanism and reaction pathways of the photocatalytic process are proposed through In-situ diffuse reflectance Infrared Fourier Transform Spectroscopy (In-situ DRIFTS) and X-ray absorption near edge structure (XANES) analysis. This work provides a new semiconductor/co-catalyst system for the photocatalytic reduction of CO2 and demonstrates that Ti3C2Tx MXene is a hopeful and inexpensive co-catalyst.

Preparation of Single-Helical Curdlan Hydrogel and Its Activation with Coagulation Factor G

β-1,3-glucans are a kind of natural polysaccharide with immunomodulatory, antitumor, and anti-inflammatory properties. Curdlan, as the simplest linear β-1,3-glucan, possesses a variety of biological activities and thermogelation properties. However, due to the complexity and variability of the conformations of curdlan, the exact structure–activity relationship remains unclear. We prepare a chemically crosslinked curdlan hydrogel with the unique single-helical skeleton (named S gel) in 0.4 wt% NaOH at 40 °C, confirmed by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). X-ray diffractometry (XRD) data show that S gel maintains the single-helical crystal structure, and the degree of crystallinity of the S gel is ~24%, which is slightly lower than that of the raw powder (~31%). Scanning electron microscopy (SEM) reveals that S gel has a continuous network structure, with large pores measuring 50–200 μm, which is consistent with its high swelling property. Using the 13C high-resolution magic angle spinning nuclear magnetic resonance (HRMAS NMR) method, we determine that most of the single-helical skeleton carbon signals in the swollen S gel are visible, suggesting that the single-helical skeleton of S gel exhibits fascinating mobility at room temperature. Finally, we reveal that the binding of S gel to coagulation Factor G from tachypleus amebocyte lysate increases and saturates at 20 μL tachypleus amebocyte lysate per mg of S gel. Our prepared S gel can avoid the transformation of curdlan conformations and retain the bioactivity of binding to coagulation Factor G, making it a valuable material for use in the food industry and the pharmaceutical field. This work deepens the understanding of the relationship between the single-helical structure and the activity of curdlan, promoting the development and application of β-1,3-glucans.

Molecularly Tunable Heterostructured Co-polymers Containing Electron-deficient and -rich Moieties for Visible-light and Sacrificial-agent-free H2O2 Photosynthesis.

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C-H arylation and Knoevenagel polymerization reactions for visible-light and sacrificial-agent-free H2O2 synthesis. The subsequent copolymerization of the electron-deficient benzodithiophene-4,8-dione and the electron-rich biphenyl (B) and p-phenylenediacetonitrile (CN) not only expands the π-conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB-CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g-1 h-1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs-TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one-electron pathway and the mutual conversion between C=O and C-OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts.

Molecularly Tunable Heterostructured Co‐polymers Containing Electron‐deficient and ‐rich Moieties for Visible‐light and Sacrificial‐agent‐free H2O2 Photosynthesis

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C−H arylation and Knoevenagel polymerization reactions for visible‐light and sacrificial‐agent‐free H2O2 synthesis. The subsequent copolymerization of the electron‐deficient benzodithiophene‐4,8‐dione and the electron‐rich biphenyl (B) and p‐phenylenediacetonitrile (CN) not only expands the π‐conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB‐CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g‐1 h‐1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs‐TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one‐electron pathway and the mutual conversion between C=O and C−OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts.

Effect of sulfation on the catalytic performance of Mn-Co composite oxide catalyst for the selective catalytic reduction of NOx by NH3

The effect of sulfation on the catalytic performance of Mn-Co composite oxide catalyst for the selective catalytic reduction of NOx by NH3 (NH3-SCR) has been investigated. Different concentrations of SO2 have been used to sulfate Mn-Co composite oxide catalyst. The catalyst sulfated with 30 ppm SO2 showed the widest activity temperature window, over which 80% NOx conversion was obtained in the temperature range of 80–350 °C. The sulfation leads to the appropriate redox property of Mn-Co composite oxide, thus improving the N2 selectivity. Meanwhile, the sulfation contributes to the generation of more Brønsted acid sites, which is crucial for the enhanced activity. In situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS) demonstrated that the adsorbed NH3 species on both Lewis acid and Brønsted acid sites, monodentate nitrite, bidentate nitrate and cis-nitrite species are the reactive intermediates in the NH3-SCR reaction. This study provides an idea for the regulating the activity temperature window of NH3-SCR catalyst to adapt to its practical application.

Evaluating the properties of deinking paper sludge from the Mediterranean area for recycling in local areas as a soil amendment and to enhance growth substrates

AbstractRecycling of paper generates large quantities of paper sludge that is rich in organic matter and can be exploited to counteract organic matter loss in agricultural soils, especially in some geographical areas, such as the Mediterranean. In order for deinking paper sludge (DPS) to be recycled, chemical and physical characterizations are required along with an analysis of possible contaminants. DPS from Italy and Tunisia, resulting from various deinking processes, were analyzed and compared in terms of their chemical properties (pH, OM, total N, C/N ratio, mineral nutrients, and trace metals), surface chemistry [diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy and Fourier-transform infrared (FTIR) spectroscopy], and thermal stability [thermogravimetric analysis (TGA)]. The aim was to improve their use as amendments in soils or growth substrates. Elemental analysis revealed higher carbon concentrations in the Tunisian DPS and similar nitrogen contents, high mineral nutrient levels, and potentially toxic trace element levels below the limits allowed for soil amendment. No evidence was found for the presence of organic pollutants, pathogens, or toxic heavy metals. Surface chemical analysis revealed comparable materials rich in aromatic, phenolic, aliphatic, and polysaccharide structures along with clay minerals and carbonates. The thermal analysis revealed similar decomposition temperatures for the organic matter. Practical implications of the results are discussed, highlighting the similar properties of sludge following ink removal by different processes and the need to integrate the N content in order to be able to employ sludge as an amendment in soil and growing media. Given the similarity of the compositions of the materials, appropriate DPS management is key to improving soil fertility, reducing paper waste disposal, and implementing a circular economy in the Mediterranean, where climate change is having a significant impact.

Microwave‐assisted Fast Synthesis of a Donor‐Acceptor Covalent Organic Framework towards Photooxidative Amidation Catalysis

The synthesis of covalent organic frameworks (COFs) at bulk scale require robust, straightforward, and cost‐effective techniques. However, the traditional solvothermal synthetic methods of COFs suffer low scalability as well as requirement of sensitive reaction environment and multiday reaction time (2‐10 days) which greatly restricts their practical application. Here, we report microwave assisted rapid and optimized synthesis of a donor‐acceptor (D−A) based highly crystalline COF, TzPm‐COF in second (10 sec) to minute (10 min) time scale. With the increasing of the time from seconds to minutes crystallinity, porosity and morphological changes are also observed for TzPm‐COF. Owing to visible range light absorption, suitable band alignment, and low exciton binding energy (Eb=64.6 meV), TzPm‐COF can efficaciously produce superoxide radical anion (O2•−) after activating molecular oxygen (O2) which eventually drives aerobic photooxidative amidation reaction with high recyclability. This photocatalytic approach works well with a variety of substituted aromatic aldehydes having electron‐withdrawing or donating groups and cyclic, acyclic, primary or secondary amines with moderate to high yield. Furthermore, catalytic mechanism was established by monitoring the real‐time reaction progress through in‐situ diffuse reflectance infrared Fourier transform spectroscopic (DRIFTS) study.

Microwave-assisted Fast Synthesis of a Donor-Acceptor Covalent Organic Framework towards Photooxidative Amidation Catalysis.

The synthesis of covalent organic frameworks (COFs) at bulkscalerequire robust, straightforward, andcost-effective techniques. However, the traditional solvothermal synthetic methods of COFs suffer low scalability as well as requirement of sensitive reaction environment and multiday reaction time (2-10 days) which greatly restricts their practical application. Here, we report microwave assisted rapid and optimized synthesis of a donor-acceptor (D-A) based highly crystalline COF, TzPm-COF in second (10 sec) to minute (10 min) time scale. With the increasing of the time from seconds to minutes crystallinity, porosity and morphological changes are also observed for TzPm-COF. Owing to visible range light absorption, suitable band alignment, and low exciton binding energy (Eb=64.6meV),TzPm-COF canefficaciously produce superoxide radical anion (O2•-) after activating molecular oxygen (O2) which eventually drives aerobic photooxidative amidation reaction with high recyclability. This photocatalytic approach works well with a variety of substituted aromatic aldehydes having electron-withdrawing or donating groups and cyclic, acyclic, primary or secondary amines with moderate to high yield. Furthermore, catalytic mechanism was established by monitoring the real-time reaction progress through in-situ diffuse reflectance infrared Fourier transform spectroscopic (DRIFTS) study.

Revealing the roles of Zr on enhanced H2-SCR performances on Pt/TiO2 catalyst

The development of Hydrogen Internal Combustion Engine (H2-ICEs) to replace conventional fuel engines is expected to be an effective way to reduce CO2 emissions, but some NOx emitted from the H2-ICEs still should be eliminated by the selective catalytic reduction of NOx with H2 (H2-SCR). Large amount of platinum oxide existed on Pt/TiO2 leads to its low H2-SCR activity. In contrast, the Zr-modified Pt/TiO2 catalysts exhibit a higher NOx conversion and N2 selectivity in a wider temperature window (100–180 °C) than those of Pt/TiO2. The appropriately weakened strong interaction between Pt and TiO2 by Zr induces more Pt0 species, which are active sites for the activation of NOx and H2 in H2-SCR reaction. More oxygen vacancies caused by the formation of Zr-Ov-Ti3+ bands involve in the activation of NOx and the adsorption of nitrates (NOx−) species. Furthermore, in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTs) demonstrates that Pt/ZrxTi1-x catalysts possess more adsorbed NOx− species and a faster reduction rate for them. Monodentate and bridged nitrates are considered to be more reactive with H2 than bidentate nitrates at relatively low temperatures. This work provides directions for the development of high-performance H2-SCR catalysts and the modulation of the conversion temperature.

Mechanism of Interfacial Molecular Interactions Reveals the Intrinsic Factors for the Highly Enhanced Sensing Performance of Ag-Loaded Co3O4.

The noble metal-loaded strategy can effectively improve the gas-sensing performances of metal oxide sensors. However, the gas-solid interfacial interactions between noble metal-loaded sensing materials and gaseous species remain unclear, posing a significant challenge in correlating the physical and chemical processes during gas sensing. In this study, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and in situ Raman spectroscopy were conducted to collaboratively investigate the interfacial interactions involved in the ethanol gas-sensing processes over Co3O4 and Ag-loaded Co3O4 sensors. In situ DRIFTS revealed differences in the compositions and quantities of sensing reaction products, as well as in the adsorption-desorption interactions of surface species, among Co3O4 and Ag-loaded Co3O4 materials. In parallel, in situ Raman spectroscopy demonstrated that the ethanol atmosphere can modulate the electron scattering of Ag-loaded Co3O4 materials but not of raw Co3O4. In situ experimental results revealed the intrinsic reason for the highly enhanced sensing performances of the Ag-loaded Co3O4 sensors toward ethanol gas, including a decreased optimal working temperature (from 250 to 150 °C), an improved gas response level (from 24 to 257), and accelerated gas recovery dynamics. This work provides an effective platform to investigate the interfacial interactions of sensing processes at the molecular level and further advances the development of high-performance gas sensors.

Furfural adsorption on V2O5 surface: A combined experimental-theoretical study

The adsorption of furfural on the V2O5 surface was investigated using experimental and theoretical methods. In situ Diffuse Reflectance Infrared Fourier-Transform Spectroscopy results show the presence of physi- and chemi-sorption phenomena, where trans-furfural is mostly chemisorbed at the beginning of the adsorption process. These results are in agreement with theoretical DFT results, as the most thermodynamically favored configurations corresponds to the chemisorbed trans-furfural (T1) and cis-furfural (C1) with binding energies of −1.83 and −2.05 eV.

Construction of an Electron Capture and Transfer Center for Highly Efficient and Selective Solar-Light-Driven CO2 Conversion.

Exploring high-efficiency photocatalysts for selective CO2 reduction is still challenging because of the limited charge separation and surface reactions. In this study, a noble-metal-free metallic VSe2 nanosheet was incorporated on g-C3N4 to serve as an electron capture and transfer center, activating surface active sites for highly efficient and selective CO2 photoreduction. Quasi in situ X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and femtosecond transient absorption spectroscopy (fs-TAS) unveiled that VSe2 could capture electrons, which are further transferred to the surface for activating active sites. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations revealed a kinetically feasible process for the formation of a key intermediate and confirmed the favorable production of CO on the VSe2/PCN (protonated C3N4) photocatalyst. As an outcome, the optimized VSe2/PCN composite achieved 97% selectivity for solar-light-driven CO2 conversion to CO with a high rate of 16.3 μmol·g-1·h-1, without any sacrificial reagent or photosensitizer. This work offers new insights into the photocatalyst design toward highly efficient and selective CO2 conversion.

SO2- and H2O-tolerant catalytic reduction of NOx at low temperatures through shielding ceria-based catalyst from poisoning: An efficient protection mechanism

Improving SO2/H2O resistance at low temperatures is a key challenge for industrial applications of NH3-SCR catalysts. Herein, a novel catalyst with remarkable low-temperature NH3-SCR activity and strong SO2/H2O resistance was designed by loading MoOx protective layer over porous kit-CeO2. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) coupled with basic characterization techniques were utilized to further elucidate the underlying mechanisms, and a dynamic balance between the deposition and decomposition of ammonia bisulfate was captured over porous kit-CeO2. Highly dispersed MoOx species pre-adsorbed with NH3 significantly curtailed the adsorption of NOx molecules, and the catalytic reaction over MoOx/kit-CeO2 primarily followed by the Eley-Rideal mechanism. At 250 °C, in the presence of SO2 and H2O, the Ce-O-Mo pairing site was almost unaffected and the super SO2- and H2O-tolerant property originated from the facilitated decomposition of ammonium bisulfate (ABS) and the shielding effect of Mo protective layer on SO2/H2O. This study provided an important guidance to the application of ceria-based catalysts for environmental control within low-temperature operations in non-power industries such as glass, steel, cement manufacturing, etc.

Enhanced performance of attapulgite-supported g-C3N4 for photocatalytic CO2 reduction

As a new type of non-metallic semiconductor photocatalyst, g-C3N4 has great potential in photocatalytic CO2 reduction. However, due to the low catalytic activity, it is still far from industrial reality for such applications. Herein, this work introduces attapulgite (ATP) into the photocatalyst system of g-C3N4. Additionally, ATP/Au-CN was obtained through the photodeposition method. The photocatalytic reduction ability of the photocatalyst for CO2 is enhanced. The photoelectric tests show that loading of ATP can promote the separation and migration of photocarriers. Through BET testing, it was found that the alkaline pore structure on the surface of ATP not only captures CO2, but also increases the specific surface area of the composite. According to the experimental results, the possible photocatalytic mechanism was verified by in-situ diffuse reflection infrared Fourier transform (DRIFT) spectral analysis and DFT calculation. This work provides new guidance for the construction of high efficient photocatalyst systems using abundant ATP as a support.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate.

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

Enhanced mineralization capacity for photocatalytic toluene degradation over Ag3PO4/TiO2: the critical role of oxygen vacancy

Mesoporous disk-like Ag3PO4/TiO2 heterojunctions with rich oxygen vacancies using MIL-125(Ti)-derived TiO2 as support were prepared for photocatalytic degradation toward toluene. The low amount of Ag3PO4 into Ag3PO4/TiO2-10 (1.7 wt% Ag3PO4) greatly improved the toluene mineralization capacity up to 95 %, which was much higher than that of the TiO2 alone (41.3 %). In-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) directly verified that the benzene ring was opened rapidly by the Ag3PO4/TiO2-10, while intermediate (like benzaldehyde and benzoic acid) accumulation occurred using pristine TiO2 as photocatalyst. It was demonstrated that Z-scheme heterojunction was formed between Ag3PO4 and TiO2, in which the photo-induced electrons were transferred from conduction band (CB) of the Ag3PO4 to valence band (VB) of the TiO2 under photoexcitation, boosting the generation of reactive oxygen species and inhibiting the photocorrosion of Ag3PO4. Interestingly, quantitative structure-activity relationship suggested that oxygen vacancies as crucial active sites both activated molecular oxygen and captured the photo-induced electrons to form •O2− that dominated in toluene mineralization. This work proved that the construction of Z-scheme heterojunction between MIL-125(Ti)-derived TiO2 and Ag3PO4 solved the inactivation of TiO2 and photocorrosion of Ag3PO4 in photocatalysis, highlighting the role of oxygen vacancy in determining the active species and mineralization degree for photocatalytic toluene elimination.

The impact of indium and manganese modifiers on the catalytic properties of zinc-alumina propane dehydrogenation catalysts

Supported zinc-containing catalysts are considered as a viable alternative to the currently-deployed Cr-based (toxic) and Pt-based (costly) catalysts of alkane dehydrogenation, as reflected also in the increased number of reports related to the Zn-based catalysts in recent years. Here, we present a study of alumina-supported Zn-In and Zn-Mn propane dehydrogenation (PDH) catalysts prepared by the tailored methods. Specifically, the introduction of zinc relied on the chemical vapor deposition (CVD, using Zn vapor) onto alumina or alumina-supported indium or manganese materials, the latter two prepared by the impregnation of alumina with aqueous solutions of the respective metal nitrates followed by the calcination and hydrogen treatment. Alternatively, both zinc and indium were introduced by the co-impregnation of alumina with aqueous zinc and indium nitrates. The PDH tests revealed that the “dilution” of the active Zn2+ surface sites with In+ cations lead to a significant improvement in the catalytic performance, i.e., the introduction of In+ increased propene selectivity and attenuated the undesirable cracking and hydrogenolysis side reactions as well as decreased coke formation. In contrast, Mn2+ cations improved the catalytic properties of Zn2+ surface sites to a lesser extent than In+ cations. All prepared catalysts were characterized by DRIFT (diffuse reflectance infrared Fourier transform) spectroscopy of the adsorbed CO and H2 probe molecules. It was found that surface In+ and Mn2+ cations affect Zn2+ sites (electronic and geometric effect), which can be assessed from the position of the IR bands of zinc hydridespecies, formed due to the heterolytic hydrogen dissociation on the Zn2+ active sites. The effect of In and Mn dopants also was confirmed by the molecular DFT simulation.