Differentiation Of Positional Isomers Research Articles

Exploring a Lux® i-Amylose-3 column in normal phase and polar-organic mode for chiral separation of cathinone derivatives and pyrovalerones using high-performance liquid chromatography.

Each year, new psychoactive substances appear on the global drug market leading to constant changes. Most of these compounds with stimulating effect possess a chiral center, thus leading to two enantiomers with presumably different pharmacological properties. Among them, synthetic cathinones, often misleadingly traded as "bath salts," play an important role. There is little knowledge about the distinct effect of the enantiomers. The aim of this study was to test a commercially available Lux® i-Amylose-3 column by HPLC-UV for enantiorecognition of cathinone derivatives. Overall, 80 compounds were tested in normal phase mode, where 75 substances were separated under initial conditions. After method optimization, at least partial separation was achieved for the remaining compounds. The same set of substances was measured in polar-organic mode, where 63 analytes were resolved into their enantiomers under initial conditions with very short retention times. Both modes showed complementary results for the individual compounds. Furthermore, the tested methods proved to be suitable for differentiation of positional isomers, which can be useful for drug checking programs. All measurements were carried out under isocratic conditions, and intraday and interday repeatability tests were performed.

Mass Spectrometry Approach for Differentiation of Positional Isomers of Saccharides: Toward Direct Analysis of Rare Sugars.

Rare sugars have gained popularity in recent years due to their use in antiaging treatments, their ability to sweeten with few calories, and their ability to heal infections. Rare sugars are found in small quantities in nature, and they exist typically as isomeric forms of traditional sugars, rendering some challenges in their isolation, synthesis, and characterization. In this work, we present the first direct mass spectrometric approach for differentiating structural isomers of sucrose that differ only by their glycosidic linkages. The method employed a noncontact nanoelectrospray (nESI) platform capable of analyzing minuscule volumes (5 μL) of saccharides via the formation of halide adducts ([M+X]-; X = Cl and Br). Tandem mass spectrometry analysis of the five structural isomers of sucrose afforded diagnostic fragment ions that can be used to distinguish each isomer. Detailed mechanisms showcasing the distinct fragmentation pattern for each isomer are discussed. The method was applied to characterize and confirm the presence of all five selected rare sugars in raw honey complex samples. Aside from the five natural α isomers of sucrose, the method was also suitable for differentiating some β isomers of the same glycosidic linkages, provided the monomeric sugar units are different. The halide adduct formation via the noncontact nESI source was also proven to be effective for oligosaccharides such as raffinose, β-cyclodextrin, and maltoheptaose. The results from this study encourage the future development of methods that function with simple operation to enable straightforward characterization of small quantities of rare sugars.

Utility of gas chromatography infrared spectroscopy (GC-IR) for the differentiation of positional isomers of fentanyl related substances

Forensic laboratories routinely use gas chromatography mass spectrometry (GC–MS) in the identification of controlled substances using both retention time and electron impact ionization (EI) mass spectra. Certain drugs such as positional isomers of some fentanyl related substances (FRS) can produce indistinguishable EI mass spectra but may be differentiated using retention time. The core structure of fentanyl consists of an amide group, a piperidine ring, an aniline ring, and an N-alkyl chain, each providing opportunities for points of substitution that create FRS and corresponding positional isomers. For this study, the analysis by GC coupled to a vapor-phase infrared spectroscopy detector (GC-IR) was used as a complementary technique to GC–MS for the identification of positional isomers of FRS. The result is a novel fentanyl library consisting of 212 different FRS reference compounds. A collaboration among three different laboratories yielded correct identifications of twenty blind samples when searched against the GC-IR FRS library created at Florida International University (FIU). The expected limits of detection for fentanyl using GC-IR range between 0.10 and 0.19 mg/mL, depending on the sample introduction (injector) method and other instrumental parameters. The newly created GC-IR library and its GC–MS counterpart of 212 FRS are shared in the supplementary materials for future use by researchers and practitioners.

Utilization of Machine Learning for the Differentiation of Positional NPS Isomers with Direct Analysis in Real Time Mass Spectrometry.

The differentiation of positional isomers is a well established analytical challenge for forensic laboratories. As more novel psychoactive substances (NPSs) are introduced to the illicit drug market, robust yet efficient methods of isomer identification are needed. Although current literature suggests that Direct Analysis in Real Time–Time-of-Flight mass spectrometry (DART-ToF) with in-source collision induced dissociation (is-CID) can be used to differentiate positional isomers, it is currently unclear whether this capability extends to positional isomers whose only structural difference is the precise location of a single substitution on an aromatic ring. The aim of this work was to determine whether chemometric analysis of DART-ToF data could offer forensic laboratories an alternative rapid and robust method of differentiating NPS positional ring isomers. To test the feasibility of this technique, three positional isomer sets (fluoroamphetamine, fluoromethamphetamine, and methylmethcathinone) were analyzed. Using a linear rail for consistent sample introduction, the three isomers of each type were analyzed 96 times over an eight-week timespan. The classification methods investigated included a univariate approach, the Welch t test at each included ion; a multivariate approach, linear discriminant analysis; and a machine learning approach, the Random Forest classifier. For each method, multiple validation techniques were used including restricting the classifier to data that was only generated on one day. Of these classification methods, the Random Forest algorithm was ultimately the most accurate and robust, consistently achieving out-of-bag error rates below 5%. At an inconclusive rate of approximately 5%, a success rate of 100% was obtained for isomer identification when applied to a randomly selected test set. The model was further tested with data acquired as a part of a different batch. The highest classification success rate was 93.9%, and error rates under 5% were consistently achieved.

Comprehensive profiling of conjugated fatty acid isomers and their lipid oxidation products by two-dimensional chiral RP×RP liquid chromatography hyphenated to UV- and SWATH-MS-detection

This research reports on the development of a comprehensive two-dimensional liquid chromatography (2D-LC) method hyphenated to inline DAD-UV and ESI-QTOF-MS/MS-detection for the separation of conjugated polyunsaturated fatty acid isomers and structurally related (saturated, unconjugated, oxidized) compounds. In pharmaceutical lipid formulations conjugated fatty acids can be found as impurities, generated by oxidation of polyunsaturated fatty acids. Due to the structural complexity of resultant multi-component samples one dimensional liquid chromatography may be suboptimal for quality control and impurity profiling. The screened reversed-phase columns showed a lack of selectivity for the conjugated fatty acid isomers but the resolutions improved with the shape selectivity of the stationary phases (C18- < C30- < cholesteryl-ether-bonded). Further enhanced selectivity for the non-chiral conjugated FAs could be achieved with amylose/cellulose-based chiral stationary phases (CSPs) which harbor cavities for selective inclusion depending on E/Z configurations of the double bonds of the analytes. Amylose-based CSPs showed higher selectivity for conjugated fatty acids than the cellulose-based polysaccharide CSPs. Hyphenating the chiral and reversed-phase columns in a comprehensive 2D-LC-setup was favorable since they showed orthogonality and good compatibility, because both were operated under RP-conditions. The chiral dimension (1D) mainly separated the different isomers, while the reversed-phase dimension (2D) separated according to number of double bonds and degree of oxidation. Using this setup, advanced structural annotation of unknowns was possible based on UV-, MS1- and MS2-spectra. Data-independent acquisition (by SWATH) enabled differentiation of positional isomers of oxidized lipids by characteristic MS2-fragments and elucidation of co-eluted compounds by selective extracted ion chromatograms of fragment ions (MS2 EICs).

Synthesis and characterization of a series of N,N′‐substituted urea derivatives by using electrospray ionization tandem mass spectrometry: Differentiation of positional isomers

Characterization of N,N'-substituted ureas was found to be challenging by nuclear magnetic resonance (NMR) spectroscopy, particularly N-di- and tri-alkylated ureas because of the absence of adjacent protons. In the present study, electrospray ionization tandem mass spectrometry has been used to differentiate positional isomeric pairs and to characterize a series of N,N'-substituted ureas, as these compounds have significant importance for drug discovery. Additionally, urea is an essential functionality in several bioactive compounds as well as a variety of clinically approved therapies. High-resolution electrospray ionization tandem mass spectrometry (ESI-HR-MS/MS) has been used to characterize a series of N,N'-substituted urea derivatives and differentiate two pairs of positional isomers. The data was acquired by Xcaliber application in positive ionization mode. ESI-HR-MS/MS spectra of [M + H]+ ions of the positional isomeric urea derivatives 8a and 8b show distinct fragmentation patterns. For example, the MS/MS spectrum of the [M + H]+ ion of isomer 8a displays the abundant fragment ion at m/z 285.1595, which was totally absent in isomer 8b. This would be plausibly formed by the cleavage of the C-N bond of the urea group with the elimination of the isocyanate moiety. In contrast, the MS/MS spectrum of the [M + H]+ ion of isomer 8b shows an intense ion at m/z 311.1389 which is completely absent in isomer 8a which would be formed by the cleavage of the C-N bond attached to the ring nitrogen. Similarly, another pair of positional isomers, 8c and 8d, have been clearly distinguished by their fragmentation behaviour. In addition, a series of N,N'-substituted urea derivatives were studied to investigate the impact of different substitution on the fragmentation behaviour. The present study demonstrates that ESI-HR-MS/MS can be used to differentiate pairs of N,N'-substituted urea positional isomers and characterize a series of derivatives. It was observed that a characteristic fragment ion was formed by the C-N bond cleavage with the elimination of an isocyanate moiety. The proposed mechanism of fragmentation was supported by the change in the fragmentation pathway upon alkylation of the NH. In order to generalize this fragmentation pattern, a series of N-alkylated ureas was synthesized and studied by MS/MS.

High-Sensitivity Glycan Profiling of Blood-Derived Immunoglobulin G, Plasma, and Extracellular Vesicle Isolates with Capillary Zone Electrophoresis-Mass Spectrometry

We developed a highly sensitive method for profiling of N-glycans released from proteins based on capillary zone electrophoresis coupled to electrospray ionization mass spectrometry (CZE-ESI-MS) and applied the technique to glycan analysis of plasma and blood-derived isolates. The combination of dopant-enriched nitrogen (DEN)-gas introduced into the nanoelectrospray microenvironment with optimized ionization, desolvation, and CZE-MS conditions improved the detection sensitivity up to ∼100-fold, as directly compared to the conventional mode of instrument operation through peak intensity measurements. Analyses without supplemental pressure increased the resolution ∼7-fold in the separation of closely related and isobaric glycans. The developed method was evaluated for qualitative and quantitative glycan profiling of three types of blood isolates: plasma, total serum immunoglobulin G (IgG), and total plasma extracellular vesicles (EVs). The comparative glycan analysis of IgG and EV isolates and total plasma was conducted for the first time and resulted in detection of >200, >400, and >500 N-glycans for injected sample amounts equivalent to <500 nL of blood. Structural CZE-MS2 analysis resulted in the identification of highly diverse glycans, assignment of α-2,6-linked sialic acids, and differentiation of positional isomers. Unmatched depth of N-glycan profiling was achieved compared to previously reported methods for the analysis of minute amounts of similar complexity blood isolates.

Differentiation of Positional Isomers of Halogenated Benzoylindole Synthetic Cannabinoid Derivatives in Serum by Hybrid Quadrupole/Orbitrap Mass Spectrometry.

Legally regulated synthetic cannabinoids (SCs) are continuously being created by making minor positional modifications to pre-existing analogs; thus, compounds with minor structural differences must be isolated and identified accurately. For iodo-benzoylindole derivatives of SCs, only specific isomers are currently the target of legal control, and it is necessary to establish an analytical method for accurately identifying positional isomers. In this study, we synthesized a series of 57 designer drugs and developed a screening method for identifying halogen positional isomers on the phenyl ring of benzoylindole derivative SCs in serum. Analytical methods using the Discovery F5 pentafluorophenyl column gave the best selectivity and retention of the positional isomer analytes. Some of the meta and para iodo-substituted SCs were eluted at similar retention times and were difficult to separate by liquid chromatography (LC). However, they were identified via the relative abundance of the two product ions in the collision-induced dissociation reaction using LC-hybrid quadrupole/orbitrap high-resolution mass spectrometry. Our synthesized halogen-substituted positional isomer SC library and method for differentiating positional isomers of halogenated benzoylindole SC derivatives could provide an indispensable analysis tool for identifying illegal drugs in serum of drug users.

Synthesis and determination of analytical characteristics and differentiation of positional isomers in the series of N-(2-methoxybenzyl)-2-(dimethoxyphenyl)ethanamine using chromatography-mass spectrometry.

N-(2-Methoxybenzyl)-2,5-dimethoxyphenethylamines (NBOMes) are synthetic phenethylamine derivatives emerging on the global drug market and reported to be associated with untoward effects in people who use drugs. Its action involves agonism at serotonin 5-HT2A receptors, affecting cognitive and behavioral processes. However, certain isomers of NBOMes may not show any psychoactive effects. They are not controlled by legislation and can be tested as pharmaceutical drugs. This study deals with the differentiation among positional isomers of 25H-NBOMe differing in the position of the two methoxy groups in the phenylethyl moiety of the molecule, using chromatography-mass spectrometry methods. The gas chromatography analysis showed that the isothermal mode was more efficient than the usually applied temperature-programming mode for the separation of the mentioned isomers. Electron ionization mass spectra of 25H-NBOMe isomers were highly similar, often resulting in a high probability of erroneous identification. However, mass spectra of their trifluoroacetyl or pentafluoropropanoyl derivatives were easily identified as they contained fragments with many significant differences. The proposed analysis using liquid chromatography-tandem mass spectrometry could distinguish the isomers of 25H-NBOMe without the need for any derivatization.

An integrated electrocatalytic nESI-MS platform for quantification of fatty acid isomers directly from untreated biofluids.

Positional isomers of alkenes are frequently transparent to the mass spectrometer and it is difficult to provide convincing data to support their presence. This work focuses on the development of a new reactive nano-electrospray ionization (nESI) platform that utilizes non-inert metal electrodes (e.g., Ir and Ru) for rapid detection of fatty acids by mass spectrometry (MS), with concomitant localization of the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C bond to differentiate fatty acid isomers. During the electrospray process, the electrical energy (direct current voltage) is harnessed for in situ oxide formation on the electrode surface via electro-oxidation. The as-formed surface oxides are found to facilitate in situ epoxide formation at the CC bond position and the products are analyzed by MS in real-time. This phenomenon has been applied to analyze isomers of unsaturated fatty acids from complex serum samples, without pre-treatment.

Differentiation of o-, m-, and p-fluoro-α-pyrrolidinopropiophenones by Triton B-mediated one-pot reaction

Positional isomer differentiation is crucial for the analysis of forensic drugs. Presently, it is difficult to distinguish among ortho, meta, and para positional isomers of ring-fluorinated synthetic cathinones, a major class of new psychoactive substances (NPSs), because they exhibit similar chromatographic properties and mass spectral patterns. We describe herein that the ring-fluorinated synthetic cathinone positional isomers, viz. o-, m-, and p-fluoro-α-pyrrolidinopropiophenones (o-, m-, and p-FPPPs), can be discriminated by their benzyltrimethylammonium hydroxide (Triton B)-mediated one-pot reaction with methanol at ambient temperature, followed by chromatographic and mass spectral analyses of the corresponding products. For p-FPPP, fluorine was nucleophilically substituted by the methoxy group to afford p-methoxy-α-pyrrolidinopropiophenone, while o- and m-FPPPs afforded the corresponding FPPP-enamine–pyrrolidine adducts, which allowed the above positional isomers to be unambiguously differentiated by comparing the reaction product chromatograms and mass spectra. The adopted approach, which does not require excess heating or use of metallic catalysts and features the advantages of simplicity and convenience, is expected to contribute toward practical NPS identification.

Characterization and differentiation of positional isomers of fluoro-fentanyl analogs by a combination of instrumental analyses

Characterization and differentiation of positional isomers of fluoro-fentanyl analogs by a combination of instrumental analyses

Mass spectral differentiation of positional isomers using multivariate statistics

Mass spectral analysis is considered to be a confirmatory method of analysis for the purpose of identifying controlled substances. However, the spectra of positional isomers are generally too visually similar to allow for differentiation. This study of fluoromethcathinone (FMC) and fluorofentanyl has shown that multivariate statistical analysis offers a feasible means of differentiating between electron ionization mass spectra of positional isomers. Three positional isomers of each compound (2-FMC, 3-FMC, 4-FMC, meta-fluorofentanyl, ortho-fluorofentanyl, and para-fluorofentanyl) were analyzed twice daily using gas chromatography/electron ionization mass spectrometry (GC/EI-MS) on six separate instruments over five days. This resulted in 60 mass spectra collected for each positional isomer. Principal component analysis (PCA) followed by linear discriminant analysis (LDA) was performed and successful differentiation of positional isomers was achieved. Leave-One-Sample-Out Cross Validation showed no errors for either group of isomers. Nineteen blind study samples were analyzed for each group of positional isomers with no misclassifications. Furthermore, data from previous case samples was analyzed using this method and in all cases the samples were properly attributed to the correct positional isomer. In addition to visual inspection of the LDA plots, objective classifications were conducted using the resulting posterior probabilities generated when LDA was performed. The results indicate multivariate statistical analysis is a promising addition to the analytical scheme of the identification of positional isomers. This would allow for higher confidence in the final identification of a compound without the need for additional instrumental analysis, saving laboratories both time and money.

Fragmentation pathways and differentiation of positional isomers of sorafenib and structural analogues by ESI-IT-MSn and ESI-Q-TOF-MS/MS coupled with DFT calculations.

Sorafenib is an orally active multikinase inhibitor for the treatment of renal cell carcinoma. A series of sorafenib structural analogues were investigated in this work for their gas-phase fragmentation behaviors using electrospray ionization ion trap mass spectrometry and quadrupole time-of-flight mass spectrometry in the positive mode. The possible fragmentation pathways were proposed based on ESI-MS/MS data and theoretical calculation. Different from the typical α-cleavage of amide, consecutive reactions that involved elimination of H2 O and CH3 NC were observed for 2-pyridinecarboxamide derivatives, which were followed by the formation of a stabilized 7-membered ring carbocation by loss of CO. Two possible protonation sites occurred at carbonyl oxygen atoms for aryl-urea derivatives and the α-cleavage of urea was the main fragmentation pathways, which was followed by the formation of stable benzo [d] oxazole ring characteristic to aryl-urea derivatives. The relative abundance of characteristic fragment ions and the energy-resolved breakdown curves were used to distinguish the 4 sets of positional isomers of sorafenib and analogues. The methodology and results of the present work would contribute to the chemical structure identification of other structural analogues and the potential impurities presented in active pharmaceutical ingredients and drug formulations.

イオントラップ型質量分析計を用いた 3-カルボニル-&lt;i&gt;N&lt;/i&gt;-(フルオロペンチル)インドール骨格を有する危険ドラッグの位置異性体識別

イオントラップ型質量分析計を用いた 3-カルボニル-&lt;i&gt;N&lt;/i&gt;-(フルオロペンチル)インドール骨格を有する危険ドラッグの位置異性体識別

Differentiation of Positional Isomers of Propyl Alcohols Using Filament-Induced Fluorescence**Supported by the National Natural Science Foundation of China under Grant Nos 61427816 and 61235003, the Research Fund for the Doctoral Program of Higher Education of China under Grant No 20130061110047, and the Open Fund of the State Key Laboratory of High Field Laser Physics.

We experimentally demonstrate the recognition of positional isomers of propyl alcohol vapor through nonlinear fluorescence induced by high-intensity femtosecond laser filaments in air. By measuring characteristic fluorescence of n-propyl and isopropyl alcohol vapors produced by femtosecond filament excitation, it is found that they show identical spectra, that is, those from molecular bands of CH, C2, NH, OH and CN, while the relative intensities are different. By comparing the ratios of the CH and C2 signals, the two propyl alcohol isomers are differentiated. The different signal intensities are ascribed to different ionization potentials of the two isomer molecules, leading to different production efficiencies of fluorescing fragments.

Regioisomeric differentiation of the alkyl-substituted synthetic cannabinoids JWH-122 and JWH-210 by GC-EI-MS/MS

Synthetic cannabinoids (SCs) are known to have structural or positional isomers. While regulations on synthetic drugs like synthetic cathinones and SCs have been placed worldwide for the ever-growing variety of new designer drugs, laws may not necessarily be applicable to their isomers. Toxicological differences may also exist among isomers for which most new designer drugs are still uninvestigated; thus, isomer differentiation becomes of forensic importance. The aim of this study was to differentiate the regioisomers of alkyl-substituted naphthoylindole-type SCs JWH-122 and JWH-210. Reference standards of the two drugs and their regioisomers were analyzed by gas chromatography–electron ionization-mass spectrometry (GC–EI-MS) first in full scan mode. Isomers that produced identical EI spectra were further analyzed by GC-tandem mass spectrometry (MS/MS) by selecting appropriate precursor ions. For JWH-210, comparison of the product ion spectra and the relative ion intensity ratios obtained from precursor ions at m/z 312 and 183 enabled differentiation between all seven regioisomers. Complete isomeric differentiation by MS/MS analysis was not attainable for JWH-122; however, combining chromatographic results with MS/MS analysis results enabled differentiation for all isomers. Two basic fragmentation pathways were speculated for both SCs; for JWH-210, fragmentation pathway tendencies differed among the isomers, resulting in their distinguishability. Our results demonstrated that the difference between the methyl (JWH-122) and ethyl (JWH-210) group substituents contributed to fragmentation pathway tendency differences and further distinguishability between the regioisomers. Functional group differences, especially their stereochemistries, were indicated to be critical factors in positional isomer differentiation by GC-MS/MS.

Positional isomer differentiation of synthetic cannabinoid JWH-081 by GC-MS/MS.

Like many new designer drugs of abuse, synthetic cannabinoids (SC) have structural or positional isomers which may or may not all be regulated under law. Differences in acute toxicity may exist between isomers which impose further burden in the fields of forensic toxicology, medicine and legislation. Isomer differentiation therefore becomes crucial from these standpoints as new designer drugs continuously emerge with just minor positional modifications to their preexisting analogs. The aim of this study was to differentiate the positional isomers of JWH-081. Purchased standard compounds of JWH-081 and its positional isomers were analyzed by gas chromatography-electron ionization-mass spectrometry (GC-EI-MS) first in scan mode to investigate those isomers who could be differentiated by EI scan spectra. Isomers with identical or near-identical EI spectra were further subjected to GC-tandem mass spectrometry (MS/MS) analysis with appropriate precursor ions. EI scan was able to distinguish 3 of the 7 isomers: 2-methoxy, 7-methoxy and 8-methoxy. The remaining isomers exhibited near-identical spectra; hence, MS/MS was performed by selecting m/z 185 and 157 as precursor ions. 3-Methoxy and 5-methoxy isomers produced characteristic product ions that enabled the differentiation between them. Product ion spectrum of 6-methoxy isomer resembled that of JWH-081; however, the relative ion intensities were clearly different from one another. The combination of EI scan and MS/MS allowed for the regioisomeric differentiation of the targeted compounds in this study.

A mass spectrometry-based method for differentiation of positional isomers of monosubstituted pyrazine N-oxides using metal ion complexes.

A series of 11 pairs of substituted pyrazine N-oxides, differing in the substituent position, were examined using electrospray ionization mass spectrometry (ESI-MS) in order to use spectra to assess the differentiation of positional isomers. For each compound, mass spectra were recorded with three different metal cations, namely calcium (II), copper (II) and aluminum (III), with characterization of the observed peaks. Differentiation between regioisomeric N-oxides has been achieved by comparison of the identity and relative intensities of the peaks originating from the adduct ions formed with the metal ions. Principal component analysis (PCA) has been employed to assist in the interpretation of the results obtained with each metal ion, exploring possible trends according to the nature and position of the substituent in the pyrazine N-oxide.

High-energy collision-induced dissociation by MALDI TOF/TOF causes charge-remote fragmentation of steroid sulfates.

A method for structural elucidation of biomolecules dating to the 1980s utilized high-energy collisions (~10keV, laboratory frame) that induced charge-remote fragmentations (CRF), a class of fragmentations particularly informative for lipids, steroids, surfactants, and peptides. Unfortunately, the capability for high-energy activation has largely disappeared with the demise of magnetic sector instruments. With the latest designs of tandem time-of-flight mass spectrometers (TOF/TOF), however, this capability is now being restored to coincide with the renewed interest in metabolites and lipids, including steroid-sulfates and other steroid metabolites. For these metabolites, structure determinations are required at concentration levels below that appropriate for NMR. To meet this need, we explored CRF with TOF/TOF mass spectrometry for two groups of steroid sulfates, 3-sulfates and 21-sulfates. We demonstrated that the current generation of MALDI TOF/TOF instruments can generate charge-remote fragmentations for these materials. The resulting collision-induced dissociation (CID) spectra are useful for positional isomer differentiation and very often allow the complete structure determination of the steroid. We also propose a new nomenclature that directly indicates the cleavage sites on the steroid ring with carbon numbers.