Differentiated Backprojection Research Articles

One network to solve all ROIs: Deep learning CT for any ROI using differentiated backprojection.

Computed tomography for the reconstruction of region of interest (ROI) has advantages in reducing the x-ray dose and the use of a small detector. However, standard analytic reconstruction methods such as filtered back projection (FBP) suffer from severe cupping artifacts, and existing model-based iterative reconstruction methods require extensive computations. Recently, we proposed a deep neural network to learn the cupping artifacts, but the network was not generalized well for different ROIs due to the singularities in the corrupted images. Therefore, there is an increasing demand for a neural network that works well for any ROI size. Two types of neural networks are designed. The first type learns ROI size-specific cupping artifacts from FBP images, whereas the second type network is for the inversion of the truncated Hilbert transform from the truncated differentiated backprojection (DBP) data. Their generalizabilities for different ROI sizes, pixel sizes, detector pitch and starting angles for a short scan are then investigated. Experimental results show that the new type of neural networks significantly outperform existing iterative methods for all ROI sizes despite significantly lower runtime complexity. In addition, performance improvement is consistent across different acquisition scenarios. Since the proposed method consistently surpasses existing methods, it can be used as a general CT reconstruction engine for many practical applications without compromising possible detector truncation.

Interior reconstruction method based on rotation-translation scanning model

In various applications of computed tomography (CT), it is common that the reconstructed object is over the field of view (FOV) or we may intend to sue a FOV which only covers the region of interest (ROI) for the sake of reducing radiation dose. These kinds of imaging situations often lead to interior reconstruction problems which are difficult cases in the reconstruction field of CT, due to the truncated projection data at every view angle. In this paper, an interior reconstruction method is developed based on a rotation-translation (RT) scanning model. The method is implemented by first scanning the reconstructed region, and then scanning a small region outside the support of the reconstructed object after translating the rotation centre. The differentiated backprojection (DBP) images of the reconstruction region and the small region outside the object can be respectively obtained from the two-time scanning data without data rebinning process. At last, the projection onto convex sets (POCS) algorithm is applied to reconstruct the interior region. Numerical simulations are conducted to validate the proposed reconstruction method.

Image reconstruction for sparse-view CT and interior CT-introduction to compressed sensing and differentiated backprojection.

New designs of future computed tomography (CT) scanners called sparse-view CT and interior CT have been considered in the CT community. Since these CTs measure only incomplete projection data, a key to put these CT scanners to practical use is a development of advanced image reconstruction methods. After 2000, there was a large progress in this research area briefly summarized as follows. In the sparse-view CT, various image reconstruction methods using the compressed sensing (CS) framework have been developed towards reconstructing clinically feasible images from a reduced number of projection data. In the interior CT, several novel theoretical results on solution uniqueness and solution stability have been obtained thanks to the discovery of a new class of reconstruction methods called differentiated backprojection (DBP). In this paper, we mainly review this progress including mathematical principles of the CS image reconstruction and the DBP image reconstruction for readers unfamiliar with this area. We also show some experimental results from our past research to demonstrate that this progress is not only theoretically elegant but also works in practical imaging situations.

Interior region‐of‐interest reconstruction using a small, nearly piecewise constant subregion

To develop a method to reconstruct an interior region-of-interest (ROI) image with sufficient accuracy that uses differentiated backprojection (DBP) projection onto convex sets (POCS) [H. Kudo et al., "Tiny a priori knowledge solves the interior problem in computed tomography," Phys. Med. Biol. 53, 2207-2231 (2008)] and a tiny knowledge that there exists a nearly piecewise constant subregion. The proposed method first employs filtered backprojection to reconstruct an image on which a tiny region P with a small variation in the pixel values is identified inside the ROI. Total variation minimization [H. Yu and G. Wang, "Compressed sensing based interior tomography," Phys. Med. Biol. 54, 2791-2805 (2009); W. Han et al., "A general total variation minimization theorem for compressed sensing based interior tomography," Int. J. Biomed. Imaging 2009, Article 125871 (2009)] is then employed to obtain pixel values in the subregion P, which serve as a priori knowledge in the next step. Finally, DBP-POCS is performed to reconstruct f(x,y) inside the ROI. Clinical data and the reconstructed image obtained by an x-ray computed tomography system (SOMATOM Definition; Siemens Healthcare) were used to validate the proposed method. The detector covers an object with a diameter of approximately 500 mm. The projection data were truncated either moderately to limit the detector coverage to Ø 350 mm of the object or severely to cover Ø199 mm. Images were reconstructed using the proposed method. The proposed method provided ROI images with correct pixel values in all areas except near the edge of the ROI. The coefficient of variation, i.e., the root mean square error divided by the mean pixel values, was less than 2.0% or 4.5% with the moderate or severe truncation cases, respectively, except near the boundary of the ROI. The proposed method allows for reconstructing interior ROI images with sufficient accuracy with a tiny knowledge that there exists a nearly piecewise constant subregion.

Reconstruction method of differentiated backprojection-projection onto convex sets in the interior problem and design of bone-nail model

This work focuses on the application of the reconstruction method of differentiated backprojection (DBP)-projection onto convex sets (POCS) in the interior problem. First, we present the definition of the interior problem and real truncated Hilbert transform, and then outline the implementation steps of DBP-POCS. After that, we introduce the middle-part known condition for region of interest (ROI) accurate reconstruction and the unique condition of the interior problem, and verify the uniqueness and stability of the interior problem accurate reconstruction through numerical experiments, and then compare the results for the interior problem in reconstruction images using filtered backprojection (FBP). In addition, the authors also design the application models of ROI reconstruction and make an initial attempt to the application of DBP-POCS method in the interior problem.

Exact Efficient Handling of Interrupted Illumination in Helical Cone-Beam Computed Tomography with Arbitrary Pitch

We present a theoretically-exact and stable computed tomography (CT) reconstruction algorithm that is capable of handling interrupted illumination and therefore of using all measured data at arbitrary pitch. This algorithm is based on a differentiated backprojection (DBP) on M-lines. First, we discuss the problem of interrupted illumination and how it affects the DBP. Then we show that it is possible to take advantage of some properties of the DBP to compensate for the effects of interrupted illumination in a mathematically exact way. From there, we have developed an efficient algorithm which we have successfully implemented. We show encouraging preliminary results using both computer-simulated data and real data. Our results show that our method is capable of achieving a substantial reduction of image noise when decreasing the helix pitch compared with the maximum pitch case. We conclude that the proposed algorithm defines for the first time a theoretically-exact and stable reconstruction method that is capable of beneficially using all measured data at arbitrary pitch.

Tiny a priori knowledge solves the interior problem in computed tomography

Based on the concept of differentiated backprojection (DBP) (Noo et al 2004 Phys. Med. Biol. 49 3903, Pan et al 2005 Med. Phys. 32 673, Defrise et al 2006 Inverse Problems 22 1037), this paper shows that the solution to the interior problem in computed tomography is unique if a tiny a priori knowledge on the object f(x, y) is available in the form that f(x, y) is known on a small region located inside the region of interest. Furthermore, we advance the uniqueness result to obtain more general uniqueness results which can be applied to a wider class of imaging configurations. We also develop a reconstruction algorithm which can be considered an extension of the DBP-POCS (projection onto convex sets) method described by Defrise et al (2006 Inverse Problems 22 1037), where we not only extend this method to the interior problem but also introduce a new POCS algorithm to reduce computational cost. Finally, we present experimental results which show evidence that the inversion corresponding to each obtained uniqueness result is stable.

A two-step Hilbert transform method for 2D image reconstruction

The paper describes a new accurate two-dimensional (2D) image reconstruction method consisting of two steps. In the first step, the backprojected image is formed after taking the derivative of the parallel projection data. In the second step, a Hilbert filtering is applied along certain lines in the differentiated backprojection (DBP) image. Formulae for performing the DBP step in fan-beam geometry are also presented. The advantage of this two-step Hilbert transform approach is that in certain situations, regions of interest (ROIs) can be reconstructed from truncated projection data. Simulation results are presented that illustrate very similar reconstructed image quality using the new method compared to standard filtered backprojection, and that show the capability to correctly handle truncated projections. In particular, a simulation is presented of a wide patient whose projections are truncated laterally yet for which highly accurate ROI reconstruction is obtained.