Different Types Of Stacking Faults Research Articles

Impact of Nitrogen on the Selective Closure of Stacking Faults in 3C-SiC.

Despite the promising properties, the problem of cubic silicon carbide (3C-SiC) heteroepitaxy on silicon has not yet been resolved and its use in microelectronics is limited by the presence of extensive defects. In this paper, we used microphotoluminescence (μ-PL), molten KOH etching, and high-resolution scanning transmission electron microscopy (HRSTEM) to investigate the effect of nitrogen doping on the distribution of stacking faults (SFs) and assess how increasing dosages of nitrogen during chemical vapor deposition (CVD) growth inhibits the development of SFs. An innovative angle-resolved SEM observation approach of molten KOH-etched samples resulted in detailed statistics on the density of the different types of defects as a function of the growth thickness of 3C-SiC free-standing samples with varied levels of nitrogen doping. Moreover, we proceeded to shed light on defects revealed by a diamond-shaped pit. In the past, they were conventionally associated with dislocations (Ds) due to what happens in 4H-SiC, where the formation of pits is always linked with the presence of Ds. In this work, the supposed Ds were observed at high magnification (by HRSTEM), demonstrating that principally they are partial dislocations (PDs) that delimit an SF, whose development and propagation are suppressed by the presence of nitrogen. These results were compared with VESTA simulations, which allowed to simulate the 3C-SiC lattice to design two 3C-lattice domains delimited by different types of SFs. In addition, through previous experimental evidence, a preferential impact of nitrogen on the closure of 6H-like SFs was observed as compared to 4H-like SFs.

Characterization of (4,4)- and (5,3)-Type Stacking-Faults in 4deg.-Off 4H-SiC Epitaxial Wafers by Synchrotron X-Ray Topography and by Photo-Luminescence Spectroscopy

Experimentally,the grazing-incident X-ray topography at different diffraction conditions, and room temperature photo-luminescence spectroscopy, various different types of stacking-faults in epitaxial films on 4-degrees-off 4H-SiC wafers were identified precisely without wafer cutting. Their types and the numbers were investigated statistically. It became clear that (4,4) type stacking-faults were the most common ones and two different types were identified. Still 34% of the stacking-faults were unknown types in the present investigation.Several different kinds of stacking-faults formed on the surface of 4-degrees-off 4H-SiC epitaxial wafers were investigated. Their types could be identified and type distribution in a wafer could be obtained using X-ray topography and room temperature Photo-Luminescence without wafer cutting. Type determination of 8H(4,4)- stacking fault ; with or without strain field, could also be decideddemonstrated using this method.