Differences In Wall Shear Stress Research Articles

Quantitative evaluation of pulmonary hypertension using 4D flow MRI: A retrospective study

BackgroundPulmonary hypertension (PH) is a severe vascular disorder that may affect 50 % of patients with heart failure. Currently, right-sided heart catheterization is required to definitively diagnose PH. However, this method is invasive and thus may not be appropriate for repeated, long-term monitoring of PH patients. This retrospective study's aim was to evaluate whether 4D flow magnetic resonance imaging (MRI) can be used to quantitively measure flow parameters to identify patients with PH. MethodsThe study cohort included 97 patients recruited from a single institution and divided into three groups based on echocardiographic estimate of pulmonary artery systolic pressure (PASP): normal group with PASP<36 mmHg, borderline PH group with PASP of 37–50 mmHg, and PH group with PASP>50 mmHg. 4D flow MRI was used to quantitively assess blood flow and velocity, regurgitation, wall shear stress (WSS) and kinetic energy in the pulmonary artery trunk, right main pulmonary artery, and left pulmonary artery. Two experienced radiologists independently analyzed the MR images, blinded to clinical details. ResultsWe found a significant difference in WSS in the pulmonary artery trunk, right main pulmonary artery and left main pulmonary artery among the three patient groups. We also found significant differences in the kinetic energy and average through velocity in the pulmonary artery trunk and right main pulmonary artery, and significant differences in the flow rate in the right main pulmonary artery. ConclusionThese data suggest that 4D flow MRI can quantitate pulmonary artery flow parameters and distinguish between patients with and without PH.

Effects of stent shape on focal hemodynamics in intracranial atherosclerotic stenosis: A simulation study with computational fluid dynamics modeling.

The shape of a stent could influence focal hemodynamics and subsequently plaque growth or in-stent restenosis in intracranial atherosclerotic stenosis (ICAS). In this preliminary study, we aim to investigate the associations between stent shapes and focal hemodynamics in ICAS, using computational fluid dynamics (CFD) simulations with manually manipulated stents of different shapes. We built an idealized artery model, and reconstructed four patient-specific models of ICAS. In each model, three variations of stent geometry (i.e., enlarged, inner-narrowed, and outer-narrowed) were developed. We performed static CFD simulation on the idealized model and three patient-specific models, and transient CFD simulation of three cardiac cycles on one patient-specific model. Pressure, wall shear stress (WSS), and low-density lipoprotein (LDL) filtration rate were quantified in the CFD models, and compared between models with an inner- or outer-narrowed stent vs. an enlarged stent. The absolute difference in each hemodynamic parameter was obtained by subtracting values from two models; a normalized difference (ND) was calculated as the ratio of the absolute difference and the value in the enlarged stent model, both area-averaged throughout the arterial wall. The differences in focal pressure in models with different stent geometry were negligible (ND<1% for all cases). However, there were significant differences in the WSS and LDL filtration rate with different stent geometry, with ND >20% in a static model. Observable differences in WSS and LDL filtration rate mainly appeared in area adjacent to and immediately distal to the stent. In the transient simulation, the LDL filtration rate had milder temporal fluctuations than WSS. The stent geometry might influence the focal WSS and LDL filtration rate in ICAS, with negligible effect on pressure. Future studies are warranted to verify the relevance of the changes in these hemodynamic parameters in governing plaque growth and possibly in-stent restenosis in ICAS.

Utility of vector flow mapping technology in quantitative assessment of carotid wall shear stress in hypertensive patients: A preliminary study.

Blood flowing in the arterial lumen acts on the surface of the vessel wall to form wall shear stress (WSS). To date, there has been limited research on the utility of non-invasive technology in the accurate quantification of carotid WSS in patients with hypertension (HP). The present study aimed to explore the usage of vascular vector flow mapping (VFM) in the quantitative assessment of carotid WSS in hypertensive patients at an early stage and to validate its clinical utility. A total of 50 individuals confirmed without carotid plaques were grouped into a HP group (n = 25) and a control (CON) group (n = 25) according to blood pressure. An ALOKA LISENDO 880 Color Doppler Ultrasound with a L441 3-15 MHZ probe was used to obtain a longitudinal section scan to determine the regions of interests (ROIs) of the common carotid artery. VFM-based WSS measurements were obtained by selecting the ROI with optimal image quality from three full cardiac cycles. WSS-derived measurements, including WSSmax, WSSmin, and WSSmean, were analyzed and compared between the HP and CON groups. In addition, the correlations between WSS-derived measurements and the carotid artery intima-media thickness (IMT) were also analyzed. There were significant statistical differences in WSSmax and WSSmean between patients in the HP and CON groups. Specifically, the HP group had significantly decreased WSSmax and WSSmean compared to the CON group (WSSmax: 1.781 ± 0.305 Pa vs. 2.286 ± 0.257 Pa; WSSmean: 1.276 ± 0.333 Pa vs. 1.599 ± 0.293 Pa, both p < 0.001). However, there was no statistical difference in WSSmin between the groups (0.79 ± 0.36 vs. 0.99 ± 0.42, p = 0.080). Additionally, Spearman's correlation analysis indicated that the WSS-derived parameters were negatively correlated with the IMT (p < 0.001). Vascular VFM technology shows promising results in the quantitative assessment of difference in hemodynamics of the vascular flow field between patients with HP and normal controls. Difference in WSS may serve as a potential predictor for the development of arteriosclerosis risks.

Hemodynamics derived from computational fluid dynamics based on magnetic resonance angiography is associated with functional outcomes in atherosclerotic middle cerebral artery stenosis.

To investigate the relationship between fluid-attenuated inversion recovery (FLAIR) vascular hyperintensity (FVH), hemodynamics, and functional outcome in atherosclerotic middle cerebral artery (MCA) stenosis using a computational fluid dynamics (CFD) model based on magnetic resonance angiography (MRA), according to a modified Rankin Scale (mRS) at 3 months. A total of 120 patients with 50-99% atherosclerotic MCA stenosis were included. The training and internal validation groups were composed of 99 participants and 21 participants, respectively. Demographic, imaging data, and functional outcome (mRS at 3 months) were collected. Hemodynamic parameters were obtained from the CFD model. The FVH score was based on the number of territories where FVH is positive, according to the spatial distribution in the Alberta Stroke Program Early Computed Tomography Score (ASPECTS). The prediction models were constructed according to clinical and hemodynamic parameters using multivariate logistic analysis. The DeLong test compared areas under the curves (AUCs) of the models. The multivariable logistic regression analysis showed that the National Institute of Health Stroke Scale (NIHSS) at admission, hypertension, hyperlipidemia, the ratio of wall shear stress before treatment (WSSRbefore), and difference in the ratio of wall shear stress (WSSR) were independently associated with functional outcome (all P<0.05). In the training group before treatment, the AUC of model 1a (only clinical variables) and 2a (clinical variables with addition of WSSRbefore) were 0.750 and 0.802. After treatment, the AUC of model 1b (only clinical variables) and 2b (clinical variables with addition of difference in WSSR) were 0.815 and 0.883, respectively. The AUC of models with hemodynamic parameters was significantly higher than the models based on clinical variables only (all P<0.05, DeLong test). In the internal validation group before treatment, the AUC of the model (clinical variables) was 0.782, and that of the model (clinical variables and WSSRbefore) was 0.800. After treatment, the AUC of the model (clinical variables) was 0.833, and that of the model (clinical variables and difference in WSSR) was 0.861. There were no significant differences between the good and the poor functional outcome group concerning FVHbefore scores before treatment (0.30±0.81 vs. 0.26±0.97; P=0.321) and FVHafter scores after treatment (0.08±0.39 vs. 0.00±0.00; P=0.244). Hemodynamics was associated with functional outcomes in patients with ischemic stroke attributed to atherosclerotic MCA stenosis, while FVH was not. Hemodynamic parameters were of great importance in the prediction models.

Left Ventricular Assist Device Support-Induced Alteration of Mechanical Stress on Aortic Valve and Aortic Wall.

The aim of this study was to evaluate the fluid dynamics in the aortic valve and proximal aorta during continuous-flow left ventricular assist device (LVAD) support using epiaortic echocardiography and vector flow mapping technology. A total of 12 patients who underwent HeartMate 3 implantation between December 2018 and February 2020 were prospectively examined. The wall shear stress (WSS) on the ascending aorta, aortic root, and aortic valve was evaluated before and after LVAD implantation. The median age of the cohort was 62 years and 17% were women. The peak WSS on the ascending aorta (Pre 1.48 [0.86-1.69] [Pascal {Pa}] vs. Post 0.33 [0.21-0.58] [Pa]; p = 0.002), aortic root (Pre 0.46 [0.31-0.58] (Pa) vs. Post 0.18 [0.12-0.25] (Pa); p = 0.001), and ventricularis of the aortic valve (Pre 1.76 [1.59-2.30] (Pa) vs. Post 0.30 [0.10-0.61] (Pa); p = 0.001) was significantly lower after LVAD implantation. No difference in WSS was observed on the fibrosa of the aortic valve (Pre 0.36 [0.22-0.53] (Pa) vs. Post 0.38 [0.38-0.52] (Pa); p = 0.850) before and after implantation. The WSS on the ascending aorta, aortic root, and ventricularis of the aortic valve leaflets was significantly altered by LVAD implantation, providing preliminary data on the potential contribution of fluid dynamics to LVAD-induced aortic insufficiency and root thrombus.

Association between erythrocyte dynamics and vessel remodelling in developmental vascular networks.

Sprouting angiogenesis is an essential vascularization mechanism consisting of sprouting and remodelling. The remodelling phase is driven by rearrangements of endothelial cells (ECs) within the post-sprouting vascular plexus. Prior work has uncovered how ECs polarize and migrate in response to flow-induced wall shear stress (WSS). However, the question of how the presence of erythrocytes (widely known as red blood cells (RBCs)) and their impact on haemodynamics affect vascular remodelling remains unanswered. Here, we devise a computational framework to model cellular blood flow in developmental mouse retina. We demonstrate a previously unreported highly heterogeneous distribution of RBCs in primitive vasculature. Furthermore, we report a strong association between vessel regression and RBC hypoperfusion, and identify plasma skimming as the driving mechanism. Live imaging in a developmental zebrafish model confirms this association. Taken together, our results indicate that RBC dynamics are fundamental to establishing the regional WSS differences driving vascular remodelling via their ability to modulate effective viscosity.

Analisis Interaksi Aliran Darah dan Pembuluh Serta Pengaruh Kebebasan Mesh Pada Simulasi Hemodinamik Berbasis Metode Elemen Hingga

Cardiovascular diseases are the world’s leading cause of death with significant death rates caused by abnormalities in vessels such as aneurysms and stenosis. These conditions can potentially cause blockage and thinning of vessels which may lead to heart attack, stroke, and bleedings. Recently, computational simulation methods are frequently used in blood flow analysis. These methods are frequently used in vascular fluid dynamics analysis which relate to the origin of a disease, efficacy prediction in installation of therapeutic instruments and complements the in vitro studies. This article presents an example of a simple vascular simulation to study the effect of blood flow with respect to vascular wall displacement. Furthermore, this research shows the importance of formal CFD pre-processing such as mesh independence testing which influences the simlation accuracy as well as vascular flow prediction and its effects on vascular wall displacement. In this research, it is concluded that the number of mesh elements affects the accuracy of vascular wall shear stress (WSS) calculations with average WSS difference of 0.8 Pa with no significant difference in wall displacement values. An average WSS of 1.95 Pa and a wall displacement of 5.7 µm are obtained from the blood flow simulation in this study.

Ultrasound Based Computational Fluid Dynamics Assessment of Brachial Artery Wall Shear Stress in Preeclamptic Pregnancy.

Preeclampsia (PE) is a pregnancy complication of abnormally elevated blood pressure and organ damage where endothelial function is impaired. Wall shear stress (WSS) strongly effects endothelial cell morphology and function but in PE the WSS values are unknown. WSS calculations from ultrasound inaccurately assume cylindrical arteries and patient specific computational fluid dynamics (CFD) typically require time-consuming 3D imaging such as CT or MRI. Two-dimensional (2D) B-mode ultrasound images were lofted together to create simplified three-dimensional (3D) geometries of the brachial artery (BA) that incorporate artery curvature and non-circular cross sections. This process was efficient and on average took 120±10 s. Patient specific CFD was then performed to quantify BA WSS for a small cohort of PE (n=5) and normotensive pregnant patients (n=5) and compared against WSS calculations assuming a cylindrical artery. For several WSS metrics (time averaged WSS (TAWSS), peak systolic WSS, oscillatory shear index (OSI), OSI/TAWSS and relative residence time) CFD on the simplified arterial geometries calculated large spatial differences in WSS that assuming a cylindrical artery cannot calculate. Bland-Altman and intra-class correlation (ICC) analyses found assuming a cylindrical artery both underestimated (p<0.05) and had poor agreement (ICC<0.5) with the maximum WSS values from CFD. WSS values that were abnormal compared to the normotensive patients (OSI=0.014±0.026) appear related to the pregnancy complications fetal growth restriction (n=2, OSI=0.14, 0.25) and gestational diabetes (n=1, OSI=0.23). Creating 3D artery geometries from 2D ultrasound images can be used for CFD simulations to calculate WSS from ultrasound without assuming cylindrical arteries. This approach requires minimal time for both medical imaging and CFD analysis.

Computational modelling for the spiral flow in umbilical arteries with different systole/diastole flow velocity ratios

The systole/diastole (S/D) flow velocity ratios in umbilical arteries (UAs) have been used to assess the health status of the feto-placental circulation, yet its connection to the morphology of UAs, specifically its coiling pattern remains unclear. Spiral flow induces unbalanced wall shear stress (WSS) distribution in UAs, and may contribute to the uneven arterial wall thickness, and the chirality. In this paper, we use a 3D computational fluid dynamics (CFD) technique to quantify the wall shear stress (WSS) in UA models of two configurations, i.e. at 0.17 and 0.50 spirals per centimeter, to represent normo- and hyper-coiling, respectively. For CFD simulations we use two different S/D ratios (3.02 and 5.70) revealed from the ultrasonography waveforms of a normal and an intrauterine growth restriction (IUGR) case. We found that more coils in the UA model enhanced WSS throughout a cardiac cycle (up to 24%) with the same inflow condition. In addition, time-averaged WSS are generally increased and more uneven in the hyper-coiling model. We suggest that the large WSS difference between the peak systole and end diastole (62% higher in the IURG case than the normal case) may induce uneven stenosis distribution at UAs, and contribute to UA chirality.

A computational framework to investigate retinal haemodynamics and tissue stress

The process of vision begins in the retina, yet the role of biomechanical forces in the retina is relatively unknown and only recently being explored. This contribution describes a computational framework involving 3D fluid-structure interaction simulations derived from fundus images that work towards creating unique data on retinal biomechanics. We developed methods to convert 2D fundus photographs into 3D geometries that follow the curvature of the retina. Retina arterioles are embedded into a six-layer representation of the retinal tissue with varying material properties throughout the retinal tissue. Using three different human retinas (healthy, glaucoma, diabetic retinopathy) and by varying our simulation approaches, we report the effects of transient versus steady flow, viscosity assumptions (Newtonian, non-Newtonian and Fåhræus-Lindqvist effect) and rigid versus compliant retinal tissue, on resulting wall shear stress (WSS) and von Mises stress. In the retinal arterioles, the choice of viscosity model is important and WSS obtained from models with the Fåhræus-Lindqvist effect is markedly different from Newtonian and non-Newtonian models. We found little difference in WSS between steady-state and pulsatile simulations (< 5%) and show that WSS varies by about 7% between rigid and deformable models. Comparing the three geometries, we found notably different WSS in the healthy (3.3 ± 1.3Pa), glaucoma (5.7 ± 1.6Pa) and diabetic retinopathy cases (4.3 ± 1.1Pa). Conversely, von Mises stress was similar in each case. We have reported a novel biomechanical framework to explore the stresses in the retina. Despite current limitations and lack of complete subject-specific physiological inputs, we believe our framework is the first of its kind and with further improvements could be useful to better understand the biomechanics of the retina.

Magnetic Resonance Imaging of Shear Stress and Wall Thickness in Tissue-Engineered Vascular Grafts.

Tissue-engineered vascular grafts (TEVGs) have demonstrated potential for treating congenital heart disease (CHD); however, quantitative imaging for tracking functional and structural remodeling of TEVGs has not been applied. Therefore, we evaluated the potential of magnetic resonance (MR) imaging for assessing TEVG wall shear stress (WSS) and wall thickness in a large animal model. Cell-seeded (n = 3) or unseeded (n = 3) TEVGs were implanted as inferior vena cava interposition grafts in juvenile lambs. Six months following implantation, two-dimensional phase-contrast MR imaging was performed at 3 slice locations (proximal, middle, and distal) to assess normalized WSS (i.e., WSS-to-cross sectional area). T2-weighted MR imaging was performed to assess TEVG wall thickness. Histology was qualitatively assessed, whereas immunohistochemistry was semiquantitatively assessed for smooth muscle cells (αSMA), macrophage lineage cells (CD11b), and matrix metalloproteinase activity (MMP-2 and MMP-9). Picrosirius Red staining was performed to quantify collagen content. TEVG wall thickness was significantly higher for proximal, middle, and distal slices in unseeded versus cell-seeded grafts. Significantly higher WSS values existed for proximal versus distal slice locations for cell-seeded TEVGs, whereas no differences in WSS existed between slices for unseeded TEVGs. Additionally, no differences in WSS existed between cell-seeded and unseeded groups. Both groups demonstrated elastin formation, without vascular calcification. Unseeded TEVGs possessed greater content of smooth muscle cells when compared with cell-seeded TEVGs. No differences in macrophage, MMP activity, or collagen content existed between groups. MR imaging allows for in vivo assessment of functional and anatomical characteristics of TEVGs and may provide a nonionizing approach that is clinically translatable to children undergoing treatment for CHD.

Perioperative evaluation of regional aortic wall shear stress patterns in patients undergoing aortic valve and/or proximal thoracic aortic replacement

ObjectivesTo assess in patients with aortopathy perioperative changes in thoracic aortic wall shear stress (WSS), which is known to affect arterial remodeling, and the effects of specific surgical interventions. MethodsPresurgical and postsurgical aortic 4D flow MRI were performed in 33 patients with aortopathy (54 ± 14 years; 5 women; sinus of Valsalva (d_SOV)/midascending aortic (d_MAA) diameters = 44 ± 5/45 ± 6 mm) scheduled for aortic valve (AVR) and/or root (ARR) replacement. Control patients with aortopathy who did not have surgery were matched for age, sex, body size, and d_MAA (n = 20: 52 ± 14 years; 3 women; d_SOV/d_MAA = 42 ± 4/42 ± 4 mm). Regional aortic 3D systolic peak WSS was calculated. An atlas of WSS normal values was used to quantify the percentage of at-risk tissue area with abnormally high WSS, excluding the area to be resected/graft. ResultsPeak WSS and at-risk area showed low interobserver variability (≤0.09 [−0.3; 0.5] Pa and 1.1% [−7%; 9%], respectively). In control patients, WSS was stable over time (follow-up–baseline differences ≤0.02 Pa and 0.0%, respectively). Proximal aortic WSS decreased after AVR (n = 5; peak WSS difference ≤−0.41 Pa and at-risk area ≤−10%, P < .05 vs controls). WSS was increased after ARR in regions distal to the graft (peak WSS difference ≥0.16 Pa and at-risk area ≥4%, P < .05 vs AVR). Follow-up duration had no significant effects on these WSS changes, except when comparing ascending aortic peak WSS between ARR and AVR (P = .006). ConclusionsSerial perioperative 4D flow MRI investigations showed distinct patterns of postsurgical changes in aortic WSS, which included both reductions and translocations. Larger longitudinal studies are warranted to validate these findings with clinical outcomes and prediction of risk of future aortic events.

A pilot study on the noninvasive fluid hemodynamic investigation of coronary plaque

Objective: To characterize the hemodynamic force towards coronary plaque based on noninvasive coronary computed tomographic angiography and to investigate its relationship with plaque features and stenosis severity by computational fluid dynamics. Methods: Twenty-six patients underwent invasive fractional flow reserve measurement following coronary computed tomography angiography examination from March to September 2016 were retrospectively included. Computational fluid dynamics was applied and wall shear stress (WSS) and axial plaque stress (APS), which extracted the axial component of hemodynamic stress acting on stenotic lesions, were calculated based on the results of noninvasive coronary computed tomographic angiography. Plaque analysis was performed to elucidate plaque features and relative plaque burden. The fluid dynamics distributions in lesions with different stenosis severity were investigated. Results: Thirty-one coronary plaques with satisfactory imaging quality were analyzed, there were 11 (35.5%) dominant low WSS (<1 Pa) lesion and 20 high WSS lesion (64.5%), 8(25.8%) net retrograde APS lesion and 23(74.2%) anterograde lesion. Plaque volume was (78.5±48.6) mm(3) and plaque burden was (69.1±12.1)% in the low WSS group, which was(60.5±57.3) mm(3), and(57.5±14.0)%, respectively in the high WSS group, the plaque burden was significantly higher in the low WSS group than in the high WSS group (P=0.028), while the percentage of calcified plaque, fibrotic plaque and lipid core volume were similar between the two groups (P>0.05). Plaque volume was (79.7±69.1) mm(3) and plaque burden was(68.7±13.7)% in the group with anterograde-dominant APS plaque, which was(61.7±24.9)mm(3), and(68.9±10.4)%, respectively in the net retrograde APS lesion group (P>0.05). Percentage of lipid core area was significantly higher in the anterograde lesion group than in the retrograde lesion group ((25.1±18.1)% vs.(10.8±12.7)%, P=0.049). Both WSS and APS were significant higher in the severe obstructive coronary stenosis group than in non-severe obstructive coronary stenosis group (P<0.05). Although there was no difference in WSS between functional coronary ischemia group and non-functional coronary ischemia group ( (13.3±8.7) Pa vs. (12.5±14.2) Pa, P>0.05), the distribution of APS was different between the functional coronary ischemia group and non-functional coronary ischemia group ((1 698.8±652.6) Pa vs. (981.4±787.5) Pa, P<0.05). Conclusion: WSS and APS can uniquely characterize the stenotic segment and has a strong relationship with lesion geometry. APS may be related to the necrotic core plaque and functional coronary ischemia. Clinical application of these hemodynamic and geometric indices may be helpful to assess the future risk of plaque progress and plaque rupture, which will be helpful on determining respective treatment strategy for patients with coronary artery disease.

Intercorrelations of morphology with hemodynamics in intracranial aneurysms in computational fluid dynamics.

Objective:To measure morphological indices and wall shear stress (WSS) of aneurysms and parent artery surface in order to explore the relationship of morphological characteristics and WSS.Methods:Data from 47 events of consecutive cerebral saccular aneurysms from 39 patients which were referred to the interventional Neuroradiology service of the Shaoxing People’s Hospital, Shaoxing, China between 2014 April and 2015 August. Wall shear stress and wall pressure (WP) of the pre-aneurysm, aneurysm and near vessel (<1.0 cm) surface were obtained. Correlation analysis was carried between morphological parameters and WSS and its ratio. WSS, WP, intra-aneurysmal flow pattern, and location of aneurysms were analyzed.Results:Impaction zone from inflow jet was located in the distal neck part of aneurysm with high WSS in 36 aneurysms (76.6%). There were significant differences in WSS between pre-aneurysm surface and near vessel (p<0.001), aneurysm (p<0.001), aneurysm and near vessel (p<0.001). Significant correlations were found between aneurysm WSS and aspect ratio (r=-0.296), aneurysm-artery WSS ratio and size ratio (r=-0.322), aspect ratio (r=-0.416).Conclusion:Uneven WSS distributes in the various part of the pre-aneurysm vessel. The impaction zone from inflow jet is located in the distal neck of aneurysm. Aspect and size ratios can effect aneurysm WSS

Abstract WP83: Wall Shear Stress Strength Over the Cerebral Aneurysm is Drastically Affected by Aneurysm Location While the Magnitude of Disturbed Flow is Closely Related to Aneurysm Size and Surface Area

Background and purpose: The rupture rate of cerebral aneurysms varies according to the aneurysm size and location. Although several reports suggest hemodynamic involvement in the mechanisms, there still remains to be clarified. Using computational fluid dynamics, we elucidated here differences in hemodynamics according to size and location of human cerebral aneurysms. Methods: Patient-specific inflow velocities and arterial geometries of 39 MCA aneurysms and anterior communicating artery (Acom) aneurysms were acquired from patients who consented to participate in the multi-institutional prospective clinical study, CFD ABO Study. Pulsatile blood flow was simulated using ANSYS-CFX, based on the Navier-Stokes equations for incompressible fluid. Aneurysms were divided into 3 groups by their size; less than 5mm, less than 7mm and more than 5mm, and more than 7mm. Results: Wall shear stress (WSS) was significantly lower in Acom aneurysms than MCA aneurysms (p=0.00075) while there was no significant difference in WSS according to aneurysm size. In contrast, indicators for disturbed flow, oscillatory shear index (OSI) and normalized transverse WSS (NtransWSS) were significantly higher over the aneurysms of the size less than 7mm and more than 5mm compared to those less than 5mm (p=0.021 and 0.014, respectively). Moreover, there were strong or moderate positive correlations between aneurysm surface area and OSI and NtransWSS, but not WSS. However, there was no significant difference in OSI or NtransWSS between MCA and Acom aneurysms. Conclusions: The data suggest that WSS strength over the cerebral aneurysm is drastically affected by the aneurysm location while the magnitude of disturbed flow is closely related to aneurysm size and surface area. A significant lower WSS in Acom aneurysms compared to MCA aneurysms may be associated with higher rupture rate in Acom aneurysms. In contrast, disturbed flow may be involved in aneurysm enlargement.

Non-Newtonian versus numerical rheology: Practical impact of shear-thinning on the prediction of stable and unstable flows in intracranial aneurysms.

Computational fluid dynamics (CFD) shows promise for informing treatment planning and rupture risk assessment for intracranial aneurysms. Much attention has been paid to the impact on predicted hemodynamics of various modelling assumptions and uncertainties, including the need for modelling the non-Newtonian, shear-thinning rheology of blood, with equivocal results. Our study clarifies this issue by contextualizing the impact of rheology model against the recently demonstrated impact of CFD solution strategy on the prediction of aneurysm flow instabilities. Three aneurysm cases were considered, spanning a range of stable to unstable flows. Simulations were performed using a high-resolution/accuracy solution strategy with Newtonian and modified-Cross rheology models and compared against results from a so-called normal-resolution strategy. Time-averaged and instantaneous wall shear stress (WSS) distributions, as well as frequency content of flow instabilities and dome-averaged WSS metrics, were minimally affected by the rheology model, whereas numerical solution strategy had a demonstrably more marked impact when the rheology model was fixed. We show that point-wise normalization of non-Newtonian by Newtonian WSS values tended to artificially amplify small differences in WSS of questionable physiological relevance in already-low WSS regions, which might help to explain the disparity of opinions in the aneurysm CFD literature regarding the impact of non-Newtonian rheology. Toward the goal of more patient-specific aneurysm CFD, we conclude that attention seems better spent on solution strategy and other likely "first-order" effects (eg, lumen segmentation and choice of flow rates), as opposed to "second-order" effects such as rheology.

A lattice Boltzmann study of the asymmetry effect on the hemodynamics in stented fusiform aneurysms

In this paper, the effect of asymmetric bulges on the hemodynamics in stented fusiform aneurysms under pulsatile Newtonian flow condition has been studied numerically by the lattice Boltzmann method. In order to guarantee the efficiency and accuracy of the method, a domain decomposition technique is also considered. Numerical results show that the flow structures are significantly affected by the asymmetric bulges. For non-stented fusiform aneurysms, the maximum wall shear stress (WSS) and maximum wall pressure are found to occur near the distal end of the aneurysms at peak systole, and the magnitude of peak WSS and wall pressure usually increase along with the increase of the maximum height of the dilated region. In addition, the implantation of a stent can reduce the magnitude of the maximum wall pressure and WSS at the distal end, and a low-porosity stent gives better performance than a high-porosity stent in terms of the reduction. In particular, for stented fusiform aneurysms, the effect of asymmetry on wall pressure is found insignificant. Further, a comparison between pulsatile solution and steady-state solution at peak systole is also presented, and the results show that the difference of WSS near the proximal neck for two conditions is not apparent, while the location of the maximum wall pressure obtained from steady-state condition moves toward downstream in contrast to pulsatile condition, and the maximum WSS at the distal end is underestimated by the condition of steady-state.

Hemodynamics in a Pediatric Ascending Aorta Using a Viscoelastic Pediatric Blood Model.

Congenital heart disease is the leading cause of infant death in the United States with over 36,000 newborns affected each year. Despite this growing problem there are few mechanical circulatory support devices designed specifically for pediatric and neonate patients. Previous research has been done investigating pediatric ventricular assist devices (PVADs) assuming blood to be a Newtonian fluid in computational fluid dynamics (CFD) simulations, ignoring its viscoelastic and shear-thinning properties. In contrast to adult VADs, PVADs may be more susceptible to hemolysis and thrombosis due to altered flow into the aorta, and therefore, a more accurate blood model should be used. A CFD solver that incorporates a modified Oldroyd-B model designed specifically for pediatric blood is used to investigate important hemodynamic parameters in a pediatric aortic model under pulsatile flow conditions. These results are compared to Newtonian blood simulations at three physiological pediatric hematocrits. Minor differences are seen in both velocity and wall shear stress (WSS) during early stages of the cardiac cycle between the Newtonian and viscoelastic models. During diastole, significant differences are seen in the velocities in the descending aorta (up to 12%) and in the aortic branches (up to 30%) between the two models. Additionally, peak WSS differences are seen between the models throughout the cardiac cycle. At the onset of diastole, peak WSS differences of 43% are seen between the Newtonian and viscoelastic model and between the 20 and 60% hematocrit viscoelastic models at peak systole of 41%.

Abstract 14689: Regional Aortic Wall Shear Stress Mapping Implicates Hemodynamics in Human Bicuspid Aortopathy

Introduction: A suspected genetic cause for bicuspid aortic valve (BAV) aortopathy has led to aggressive resection strategies. Using 4D flow MRI, we documented increased regional wall shear stress (WSS) in BAV patients. Local hemodynamics may exacerbate extracellular matrix (ECM) degradation leading to disease progression. If validated, preoperative regional hemodynamic assessment could be used to guide more targeted patient-specific aortic resection. For the first time, we correlated regional WSS with aortic tissue remodeling in BAV patients. Methods &amp; Results: BAV patients (N=11) undergoing ascending aortic resection received preoperative 4D flow MRI with regional WSS differences mapped. Paired aortic wall samples (from same-patient with elevated WSS paired to normal WSS regions) were collected during surgery and compared using histology (pentachrome), biomechanics (biaxial mechanical testing), and ECM regulation (protein expression). Patient mean age: 49±18 years; mean aortic diameter: 4.6±0.7cm (range: 3.6 - 6.3cm); 55% had R+L fusion pattern; 36% had severe aortic stenosis. All patients had heterogeneous WSS patterns with regions of elevated WSS adjacent to those of normal WSS. By histology, regions of increased WSS showed greater medial elastin fragmentation, fibrosis, and cystic medial necrosis compared to adjacent areas of normal WSS. Regions of increased WSS showed increased elastic modulus (fold change±SD: 1.53±0.68; P=0.06, N=5) and collagen stiffness (1.37±0.49; P=0.07, N=5) compared to normal WSS regions suggesting altered distensibility. Multiplex protein analyses of ECM regulatory molecules revealed an increase in transforming growth factor β-1 (1.49±0.71, P=0.02), MMP-1 (1.62±0.84; P=0.01), MMP-2 (1.49±1.00; P=0.06), MMP-3 (1.23±0.36; P=0.02), MMP-7 (1.57±0.75; P=0.02), and TIMP-2 (1.26±0.33; P=0.01) in elevated WSS regions suggesting ECM dysregulation consistent with aortic remodeling. Conclusions: In BAV aorta, regional WSS corresponds with local histologic abnormalities, altered biomechanics, and ECM dysregulation. These novel data strongly implicate local hemodynamics as a mediator of BAV aortopathy. With further validation, 4D flow MRI could be used to guide personalized resection strategies.

219 Rock Inhibits Endothelial Migration in Disturbed flow Condition: A Potential Therapeutic Target in PCI

Stent deployment to treat coronary artery disease causes damage and loss of endothelial cells (EC). Wall shear stress (WSS), a mechanical force exerted by flowing blood on the vessel wall,...