Differences In Specific Gravity Research Articles

GROWTH AND WOOD TRAITS EVALUATION OF 15-YEAR-OLD TENGKAWANG (Shorea spp.) TREE STANDS IN GUNUNG WALAT UNIVERSITY FOREST, WEST JAVA, INDONESIA

Gunung Walat University Forest (GWUF) in Sukabumi Regency, Indonesia, plays a crucial role in providing various ecosystem services. Five important Shorea trees, i.e., S. stenoptera, S. mecisopteryx, S. pinanga, S. palembanica, and Shorea leprosula have been planted in GWUF as an effort for its conservation and object of research. An evaluation of the adaptability and suitability of these species to the GWUF ecosystem, as well as their wood characteristics, needs to be carried out regularly. Therefore, the study aimed to examine the growth performances and physical wood properties of five Shorea species, i.e., Shorea stenoptera, S. mecisopteryx, S. pinanga, S. palembanica, and S. leprosula at the age of 15-year-old planted in GWUF. The results indicated that S. leprosula exhibited the best growth performance in terms of average diameter (19.64 cm), volume (0.27 m3), slenderness (126.58), and wood density (0.94 g/cm3), and S. stenoptera showed the best performance in average height (23.35 m). While the poor performance was shown by S. palembanica in terms of average diameter (6.73 cm), height (11.15 m), volume (0.02 m3), wood density (0.87 g/cm3), and specific gravity (0.45), and S. stenoptera in terms of average slenderness (202.73). In addition, significant differences in tree height, diameter, volume, wood density, specific gravity, and moisture content were found in S. palembanica compared with other species. The relationship between the growth and physical wood properties parameters varied between species. The study revealed that planting the five Shorea species in GWUF is suitable for increasing vegetation cover and conserving the species.

Effect of Organic and Industrial Fertilizers on Reducing Sugar, Specific Gravity, Dry Matter and Starch Composition of Fresh Harvested Irish Potato Varieties in Musanze District Rwanda

Potatoes for use in industrial processing must have a low reducing sugar concentration. This study investigates the impact of organic and synthetic fertilizers on the composition of Irish potato cultivars’ reducing sugar, specific gravity, dry matter, and starch. The research was conducted at Busogo Farm in Rwanda, using randomized complete block designs in seasons 2021 B and 2022 A with rate of ten tones per hectare under the doses of 100%, 50%, and 0% and three hundred kilograms per hector under the dose of 100%, 50% and 0% respectively for farmyard manure and NPK 17.17.17. Results showed significant effects of season and treatment on reducing sugar levels in potatoes. Twihaze and Kirundo varieties recorded high glucose (0.09%), while Gisubizo variety in control, recorded low glucose (0.01%). Additionally, the analysis of variance showed that Irish potato varieties with low to moderate and moderate to high glucose contents, respectively, experienced extremely significant (p 0.001) effects of farmyard manure and NPK on glucose content for the seasons 2021 B and 2022 A. The application of inorganic and organic fertilizers had a significant impact (p 0.05) on dry matter in seasons B and A, according to the analysis of variance. Additionally, the results demonstrated extremely significant (p<0.01) differences in specific gravity and starch in both seasons, with Kinigi variety having higher values of dry matter, specific gravity, and starch content in season B and A, respectively, of 24.58, 1.10, and 18.59%. Season 2022 A’s high decreasing sugar levels were caused by meteorological conditions brought on by the soil’s high moisture content as well as the maturity of the tubers. Due to its low level of reducing sugar, Gikungu, Kirundo, and Kinigi are excellent for chips whereas Twihaze variety is advised for boiling cooking methods.

Fabrication of Al-Ti intermetallic alloy via aluminothermic reduction process from TiO2 in molten salts

ABSTRACT A novel method based on the aluminothermic reduction of TiO2 in Na3AlF6-AlF3-CaF2 molten salts has been proposed to prepare Al-Ti intermetallic alloys in this research. The Al-Ti intermetallic alloy was obtained by reducing dissolved TiO2 in electrolyte molten salt using liquid Al as a reductant at the stirring rate of 200 r/min for 5 min under 960°C, and it was mainly enriched in the Al matrix which was dispersed in molten salts. The lower alloy layers in the melt pool were characterised by X-ray diffraction (XRD), scanning electron microscopy, energy dispersive spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS), taking advantage of the specific gravity difference between the molten salt and the alloy. The TiAl3 was the major intermetallic alloys phase formed between Al and Ti according to XRD results. The Al2O3 by-product in the reduction process of TiO2 was dissolved in electrolyte molten salt.

Rehydration effect of qingshu buye decoction on exercise and high temperature-induced dehydration.

The aim of this study was to conduct a comprehensive evaluation of the rehydration efficacy of QSBYD and elucidate its potential underlying mechanism. 38 participants were randomly assigned to receive either QSBYD or placebo before and after exercise and heat-induced dehydration. Hydration indicators were measured over time. Blood tests assessed cellular anaerobic respiration metabolites, serum inflammatory markers, and coagulation markers. Perceptual measures of thirst, fatigue, and muscular soreness were also taken. QSBYD consumption resulted in lower urine volume (Control vs. QSBYD: 260.83 ± 167.99 ml vs. 187.78 ± 141.34 ml) and smaller decrease in percentage of nude body weight change from baseline (Control vs. QSBYD: -0.52 ± 0.89% vs. -0.07 ± 0.52%). Although no significant differences in urine specific gravity, QSBYD resulted in reduced urine volume at 120 min, suggesting improved fluid retention. Furthermore, QSBYD resulted in lower levels of IL-1β (Control vs. QSBYD: 2.40 ± 0.68 vs. 1.33 ± 0.66 pg/mL), suggesting QSBYD may provide benefits beyond hydration. Further investigation into the underlying mechanisms and long-term effects of QSBYD on hydration is warranted. QSBYD may be an effective alternative to commercial sports drinks in mitigating dehydration effects.

Variation of Agitator Blades in Continous Settling Tank to Reduce Oil Losses in Oil Refining Process in Palm Palm Factories

Continuou Settling Tank (CST) is one of the units located at the clarification station where the CST works to separate oil and mud based on differences in specific gravity where the lighter density will go up, namely oil, while the heavy type will settle to the bottom, namely mud. The language here is how to make the construction of the agitator transmission in the Continuou Settling Tank (CST) unit and how the agitator blade influences the oil content contained in the sludge in the Continuou Settling Tank (CST) unit. The method is carried out with variations in the number of blades that open 2, 4 and 6 pieces. The specifications of the equipment data obtained are primary data resulting from the design of the Continuou Settling Tank (CST) tool. Based on the blade obtained two results the percentage of oil content of 10.85%. This shows that there is still oil content in the mud. Likewise, the blade that found four pieces was 8.678%. While on the blade that got six pieces, the average percentage of oil was 7.652%. This shows that the blades that have been opened six pieces have met the desired percentage of oil standards.

Study on Manufacturing of Bricks by Using Waste Foundry Sand

The main objective of this project is to utilize waste foundry sand (WFS) from foundry industry in manufacturing of bricks. The entire process of combining clay mixtures, forming of bricks, drying and firing was done with local conditions. With minimum process it was possible to introduce up to 30% WFS in clay bodies to produce bricks of desirable properties. The minimum average wet compression resistance of 5.54Mpa, and maximum average water absorption of 20.76% was obtained for bricks containing 30% WFS, when fired at 900 C. There was insignificant difference in apparent porosity, water absorption, and specific gravity of bricks containing WFS, when compared to commercial bricks. The addition of WFS reduced the bulk density of the bricks, which has also caused reduction in compressive strength. WFS bricks can be classified as class II bricks, based on recommendations of IS 1077 standard specification. These bricks can be used in single storied load bearing structures, and also in the construction of infill walls in multi-storied framed structures.

Sweat Characteristics and Fluid Balance Responses During Two Heat Training Camps in Elite Female Field Hockey Players.

We examined the sweat characteristics and fluid balance of elite female field hockey players during two heat training camps. Fourteen elite female field hockey players from the Australian national squad participated in two heat training camps held ∼6months apart, following winter- (Camp 1) and summer-based training (Camp 2). Daily waking body mass (BM) and urine specific gravity (USG) were collected, along with several markers of sweat and fluid balance across two matches per camp. There was a 19% mean reduction in estimated whole-body sweat sodium concentration from Camp 1 (45.8 ± 6.5mmol/L) to Camp 2 (37.0 ± 5.0mmol/L; p < .001). Waking urine specific gravity ≥ 1.020 was observed in 31% of samples, with no significant differences in mean urine specific gravity or BM between camps (p > .05), but with substantial interindividual variation. Intramatch sweat rates were high (1.2-1.8L/hr), with greater BM losses in Camp 1 (p = .030), resulting in fewer players losing ≥2% BM in Camp 2 (0%-8%), as compared with Camp 1 (36%-43%; p = .017). Our field data suggest that elite female field hockey players experience substantial sweat losses during competition in the heat regardless of the season. In agreement with previous findings, we observed substantial interindividual variation in sweat and hydration indices, supporting the use of individualized athlete hydration strategies.

Physicochemical and microbiological changes during two-stage fermentation production of umqombothi

Umqombothi is a traditional South African fermented beverage. The brewing process limits its consumption to a day or two after production due to the constant production of carbon dioxide. In this study the physicochemical and microbial changes in Umqombothi produced at two-stage fermentation temperatures [U1 (30-30 °C), U2 (30-25 °C), U3 (25–30 °C)] were studied over 52 h. Samples were collected before first fermentation (BFF), after first fermentation (AFF), before second fermentation (BSF), after second fermentation (ASF) and after final product (FP). For all three fermentation temperatures, there was a significant increase (p < 0.05) in microbial counts and a significant drop in pH following fermentation stages (AFF and ASF), with a considerable decrease in total soluble solids (TSS) after ASF. The total viable count (TVC), lactic acid bacteria (LAB), yeast, and mould were not detected in the BSF samples for all three fermentation temperatures. The LAB count was significantly (p < 0.05) different at 5.18, 5.36 and 5.25 log CFU/mL for U1, U2 and U3, respectively. The pH was 3.96, 4.12 and 4.34 for U1, U2 and U3, respectively, and was significantly (p < 0.05) different. Total soluble solids significantly (p < 0.05) increased at the BSF at all temperatures. There was no significant (p > 0.05) difference in specific gravity and ethanol content of Umqombothi at all fermentation temperatures. At all fermentation temperatures, Umqombothi was characterised by redness and yellowness, with that collected from U1 being the lightest in colour (L* = 71.24). Colour difference (ΔE) in the between of 4–8 was perceivable but acceptable as they had a ΔE value of 3.58, 2.07 and 2.02 for U1–U2, U1–U3 and U2–U3 respectively. Umqombothi produced at 30 °C for first and second fermentation (U1) was the most preferred by the consumer panellist and consequently, the best fermentation temperature to produce Umqombothi.

Comparative Analysis of Physicochemical Properties of Oils from Groundnut, Melon, Watermelon and Orange Seeds

This study analyzed and compared the physicochemical properties of oils produced from groundnut, melon, watermelon and orange seeds. The moisture content, saponification value, iodine value, peroxide value, acid value, free fatty acid, ester value, refractive index, viscosity, density, specific gravity, cloud point, pour point, flash point and fire point of the oils were analyzed. There were no significant differences in iodine value, peroxide value, refractive index, viscosity, specific gravity, cloud point, pour point, flash point and fire point, while there were significant differences in the moisture content, saponification value, acid value, free fatty acid, ester value, and density, The results revealed that these oils contain low fatty acid value and they are good sources of edible oil as they have low acid value. These oils also have great potentials as industrially promising oils, with their high saponification and iodine values, they will be good raw materials for bio-lubricant production and for a variety of industrial applications.

The Effect of Silica Filler Source on the Mechanical Properties of Composite Rubber

Rubber composite is a high molecular weight polymer, produced from natural or synthetic rubber with sulfur as its common crosslinking agent. To improve the mechanical properties of rubber, filler with high silica content was usually added. Hence in this experiment, due to their high silica content, Risk husk ash (RHA), along with chemizil and zeosil were used as the composite filler. Sulfur was chosen as the crosslinking agent of a rubber mixture that consists of polyisoprene rubber (IR), acrylonitrile butadiene rubber (KNB), and polybutadiene rubber (BR). The composition of the other component was fixed at Per Hundred Rubber (PHR) of 51.43. During mixing, the temperature and mixing time were kept constant at 60-70oC and 6 minutes. The properties of rubber composite were characterized based on their physical and mechanical properties. Based on the rheological test, RHA has a faster vulcanization time compared to chemisil and zeosil. Improvement of the mechanical properties of the RHA rubber mixture was also observed, with 300% modulus, elongation, and tear at 42 kg/cm2, 867%, and 51 kg/cm2. Meanwhile, insignificance differences in tensile strength, hardness, and specific gravity of RHA compared to chemisil and zeosil, were observed.

A physical coal cleaning approach for clean energy production from low grade Lakhra coal of Pakistan using diester table

In this work coal from Lakhra (coal mine in Pakistan) was subjected to a physical technique for mineral matter and sulfur reduction by using diester table. Effect of particle size and coal-to-water ratio of slurry were studied. A reduction of 85% in sulfur content and 88% in ash content for 500 µm coal sample was observed. While at 300 µm size sulfur and ash content were reduced about 77% and 80% respectively. At 150 µm size, the reduction in sulfur and ash was observed to be lesser (54% and 55% respectively) due to the decrease in specific gravity difference of coaland impurity (i.e. sulfur and ash). GCV increased from 17.2 MJ/kg of the raw coal to 23.3 MJ/kg of cleaner fraction obtained at 500 µm. Based on the results of this study, diester table can be proposed to be a simpler however an effective physical coal cleaning method to reduce sulfur and ash content. Besides other parameters, particle size is a crucial parameter to impact the cleaning efficiency and because of the greater difference in specific gravity of coal and impurity, higher particles size used in this study resulted in the cleanest product.

The Role of Particle Size and Shape on the Recovery of Copper from Different Electrical and Electronic Equipment Waste

The increasing world population and the development of technology have boosted the demand for electrical and electronic equipment (EEE). Equipment that has completed its life cycle causes serious damage to the environment due to its toxic components. In addition, it contains many more base metals (copper, aluminum, nickel, lead, tin, etc.) and precious metals (silver, gold, palladium, platinum, etc.) compared with a run of mine ore. Recycling these values with an economic and environmental understanding will ensure sustainability and prevent the rapid depletion of natural resources. Specific gravity, magnetic, electrostatic, optical, surface, thermal, and other property differences between particles as well as the shape, size, and distribution of individual particles directly determine the success of the recycling process. By determining the behavior of the particles during enrichment and producing grains suitable for enrichment with better performance in the size reduction stage, the quality of the concentrate to be subjected to the final chemical/metallurgical treatment will be enhanced. The main aim of this study is to reveal the effect of particle size and shape properties on the recovery of valuable metals from two different waste electrical and electronic equipment (WEEE) sources, end-of-life printed circuit boards and waste electric wires, using environmentally friendly, easier-to-use, and cost-effective mechanical, physical, and physiochemical processes. Deciding on the most suitable enrichment process after detailed characterization of the products obtained from different comminution equipment and their particle size and shape directly affected the amount, content, and recovery of the final concentrate.

EFFECT OF MASTITIS ON MILK COMPOSITION OF CROSS-BRED (HOLSTEIN FRIESIAN X CHOLISTANI) AND SAHIWAL CATTLE

The present study was designed to investigate the effect of mastitis on various components including fat percentage, protein, total solids, solid not fat, pH, specific gravity and lactose content in milk of cross-bred (Holstein Friesian × Cholistani) and Sahiwal cattle. A total of 376 milk samples (excluding blind and nonfunctional teats) from 100 cows (50 cross-bred and 50 sahiwal) were collected aseptically. Animals of different ages, parity and stages of lactation were selected under field condition. The diagnosis of subclinical mastitis was done on basis of Surf Field Mastitis Test. For bacterial examination of milk, the samples were grown in laboratory and various biochemical tests were performed. The results of the present study indicated that solid not fat (SNF) of mastitic sahiwal and cross-bred cattle and total solids percentage of normal and mastitic cattle were significantly reduced as the severity of mastitis increased in animals. The milk pH of normal and mastitic cattle including both sahiwal and cross-bred was significantly increased in severe cases of mastitis. The specific gravity of normal and mastitic milk samples showed that there was no significant difference in specific gravity as compared to normal. The protein percentage of normal and mastitic cattle including both sahiwal and cross-bred cattle indicated that protein concentration was significantly reduced in severe cases of mastitic animals. The findings of present study highlighted that mastitis cause major alterations in composition of milk leading to poor quality of the milk.

Genotype and age of industrial plant Jatropha curcas L. affect physico-chemical properties of seed oil

Jatropha curcas, has been established as a plant whose seeds contain a relatively high percentage of oil that is suitable for biodiesel production, among other industrial applications. Seed oil properties of J. curcas may vary depending on soils, age of plant, genotype of the plant, and agro-climatic conditions of a specific geographical region. Studies under such conditions have not yet been conducted. The present study was aimed at investigating the effects of genotype and age of the plant on the physicochemical properties of its seed oil. The seed oil was extracted using n-hexane as a solvent in the Soxhlet extraction apparatus from seed kernel collected from different genotypes and plants of different ages. Oil content in the kernel ranged from 49.78–53.75% (w/w) among the seed samples depending on genetic materials and plant age. The oil content showed very little but significant differences in density and specific gravity among the samples. The highest free fatty acid (FAA) was produced by the kernel oil of 3-year-old plants (7.78%), and 7- and 10-year-old plants gave the lowest FAA (1.26 and 1.31%, respectively). The kernel oil of 7-year-old plants produced the highest iodine value (93.60 mg/g oil) and the kernel oil of 3-year-old plants produced the lowest iodine value (61.10 mg/g oil). Kernel oil of 10-year-old plants gave the lowest (172.98 mg KOH/g) saponification value and 4-year-old Hybrid-3 gave the maximum value (209.97 mg KOH/g oil). The seed oil of Jatropha accessions showed very little difference (39.88–40.85 MJ/kg) for high heating values irrespective of their age. On the other hand, the cetane number varied from 55.32 to 59.58 in the oil samples. The age of plant and seed sources had a significant effect on seed oil content and the physio-chemical properties of Jatropha.

Effect of Phosphorus Fertilization on Yield of Chipping Potato Grown on High Legacy Phosphorus Soil

Potato (Solanum tuberosum L.) has low phosphorus (P) use efficiency as compared with other vegetable crops. This study was conducted at two commercial chipping potato farms (A and B) in Northeast Florida to evaluate different P rates for potato production. Plot size was 0.62 and 0.49 hectares for Farms A and B, respectively. The total trial area was 13.32 hectares per growing season for three consecutive years from 2018 to 2020. The randomized complete block design (RCBD) was employed with four replications per P rate. The chipping potato variety, ‘Atlantic’ was cultivated with three P rates: 0, 24.5, and 48.9 kg P ha−1 in 2018, and 12.2, 24.5, and 48.9 kg P ha−1 in 2019 and 2020. The soil of Farm A contained 497 mg kg−1 Mehlich-3 extractable P and 946 mg kg−1 aluminum (Al), and that of Farm B had 220 mg kg−1 Mehlich-3 extractable P and 253 mg kg−1 Al. The results showed that a P rate of 48.9 kg P ha−1 significantly improved tuber yield as compared to 0 in 2018 or 12.2 kg P ha−1 in 2019 and 2020. Application of 48.9 kg P ha−1 fertilizer P significantly increased the soil P level in 2018 and 2020, while the application of 24.5 kg P ha−1 fertilizer P increased the soil P level significantly in 2018 only. Tubers with 48.9 kg P ha−1 showed significantly lower external quality issues than 0 or 12.2 and 24.5 kg P ha−1. However, there were no significant differences in specific gravity, internal tuber quality, and tuber size among the different P rates. The tuber yield data show that potato plants grown on soil with high legacy P still require approximately 50 kg ha−1 P application for sustainable potato production in the area. This high P requirement results from the combination of high concentrations of active metals (Al and iron (Fe)) and a decrease in pH of one unit in the growing season. New P-fertilization programs with post-plant applications rather than with pre-plant application are urgently needed for minimizing P-immobilization by Al and Fe and improving P-use efficiency for potato production in the state.

Development and Evaluation of Earthworm-cum-compost Separator

A manually operated earthworm-cum-compost separator was designed, developed, and evaluated. The machine consisted of a separating unit, collecting tray, feed hopper, operating handle, sieving unit, and transporting wheels in order to separate the compost and earthworms from the compost material of vermin-culture. The rotating action of the cylinder caused the compost present in the vermi-culture to get separated at the sieving unit on the basis of size and the difference in specific gravity of clods and earthworms causing their separation at the discharge flume of the machine. The separator functioned properly as there was no damage caused to the earthworms. The throughput capacity, compost separation efficiency, earthworm separation efficiency, and overall efficiency were 600 kg.h-1, 88.25%, 96.02% and 84.54%, respectively, at 20.47% (w.b.) moisture contents of vermicast, 23 rpm cylinder speed, and 9° cylinder inclination angle.

Design and Experimentation Shaking Table Tool for Gravity Concentration Metal Mineral Separation

Mineral dressing, especially metal minerals in Indonesia, is carried out using appropriate methods based on their properties and characteristics. The method often used is gravity concentration. The technology that makes use of it is a shaking table. This tool works based on the difference in specific gravity and pаrtіcle size in the flowing film concentration which exerts a thrust against the pаrtіcles on the deck. In an effort to meet the needs of practicum and research in the mining engineering department, especially the Sriwijaya University Mineral Processing Laboratory. For this reason, the existing equipment in the laboratory is modified by changing the design and size of its main components. The deck is designed with a length of 170 cm and a width of 102 cm. The riffles are installed parallel to a height of 3 mm, a width of 1 cm and a spacing of 3 cm. Experimentation is carried out by adjusting the variation of the variables. The variables used as parameters are deck slope (4°, 6° and 8°), water flow rate (10, 12 and 15 L / min) and feedingspeed (5, 10 and 15 minutes). The sample used was refined tin ore. Sampling at two locations, namely sample A at the Bantam B122 Collection Station, Belinyu and sample B at the TKT DU1521 Jangkang Washing Plant Station.

Design of Air Table Equipment for the Separation of Metal Minerals by Gravity Concentration with Wind Media

This research is an air table device design and laboratory scale experimentation. Air table is a tool to separate valuable minerals from mineral impurities of tin ore based on differences in specific gravity, shape and size using air/wind media. The design of the tool starts from the design and manufacture of the table as well as the manufacture of other main components, including; feed hopper, ventilation and tertoron cloth. Then the next stage is the calculation and selection of a table driving motor in the form of an electric motor with a pulley system and the last is the calculation and selection of a blower machine as a machine that functions to blow pressure into the table. The installation of the air table was carried out at the Materials Processing Laboratory, Faculty of Engineering, Sriwijaya University. To determine the success rate of designing and evaluating the performance of the air table, experiments were carried out using several combinations of variables, including table slope, feed weight (grams), and processing time (minutes).). The experimental process of the tool was tested using tin ore samples from the remaining tin ore washing (SHP) from the Toboali Washing Plant, PT Timah, Tbk. The experimental results show that the performance of the tool shows good but not optimal performance where the lowest concentrate gain is achieved at 50.20% and the highest is 79.14% at a deck slope of 5.8°, feed weight is 600 grams and processing time is 15 minutes. The results of the evaluation show that the air table device functions relatively well, but needs to be improved and adjusted for more varied variables as well as representative samples and quantities of tin ore, so as to produce maximum concentrate and grade.

Effectiveness of Gravity Separation of Low Grade Nigerian Gold Ore Using Shaking Table

The response of Imogbara (Nigeria) gold ore to shaking tabling gravity separation methods was investigated in this research work. Gold concentration in run-off mines is usually as low as 0.005 ppm and must be upgraded in order to reduce the recovery process extraction costs. Gravity separation method (the focus of this work) is one of the readily affordable beneficiation methods. Shaking table is a developed separation equipment of gravity method that has been adopted to increase concentrate based on difference of specific gravity. The output result of the concentration process using shaking table is basically influenced by a number of variables, such as rotational shaking speed, particle size and deck slope. In this research, the range of rotational speed shaking was between 100 rpm and 200 rpm, the particle size was between (−300 μm > X −75 μm) and deck slope was between 10° and 30°. EDXRF was used to measure gold concentration in the concentrate as well as the tailings. The result shows that the optimum condition is obtained at a shaking speed of 100 rpm, with a slope of 10° and particle size less than 75 μm.

Relationships Between WUT (Body Weight, Urine Color, and Thirst Level) Criteria and Urine Indices of Hydration Status.

A Venn diagram consisting of percentage body mass loss, urine color, and thirst perception (weight, urine, thirst [WUT]) has been suggested as a practical method to assess hydration status. However, no study to date has examined relationships between WUT and urine hydration indices. Thus, the purpose of this study was to investigate relationships between urine specific gravity, urine osmolality, and the WUT criteria. Urine specific gravity and urine osmolality indicate hypohydration when the WUT criteria demonstrate hypohydration (≥2 markers). Laboratory cohort study. Level 3. A total of 22 women (mean ± SD; age, 20 ± 1 years; mass, 65.4 ± 12.6 kg) and 21 men (age, 21 ± 1 years; body mass, 78.7 ± 14.6 kg) participated in this study. First morning body mass, urine color, urine specific gravity, urine osmolality, and thirst level were collected for 10 consecutive days in a free-living situation. Body mass loss >1%, urine color >5, and thirst level ≥5 were used as the dehydration thresholds. The number of markers that indicated dehydration levels were counted and categorized into either 3, 2, 1, or 0 WUT markers that indicated dehydration. One-way analysis of variance with Tukey pairwise comparisons was used to assess the differences in urine specific gravity and urine osmolality between the different number of WUT markers. Urine specific gravity in 3 WUT markers (mean ± SD [effect size], 1.021 ± 0.007 [0.57]; P = 0.025) and 2 WUT markers (1.019 ± 0.010 [0.31]; P = 0.026) was significantly higher than 1 WUT marker (1.016 ± 0.009). Urine mosmolality in 2 WUT markers (705 ± 253 mOsmol [0.43]; P = 0.018) was significantly higher than 1 WUT (597 ± 253 mOsmol). Meeting at 3 WUT resulted in specificity of 0.956 and at 0 WUT resulted in sensitivity of 0.937 for urine osmolality>700mOsm. These results suggest that when 3 WUT markers are met, urine specific gravity and urine osmolality indicated hypohydration and 0 WUT represents a high likelihood of euhydration. 1 and 2 WUT values are indeterminate of hydration status. The WUT criterion is a useful tool to use in field settings to assess hydration status when first morning urine sample was used. Athletes, coaches, sports scientists, and medical professionals can use WUT criteria to monitor dehydration with reduced cost and time.