Dielectric Spectroscopy Measurements Research Articles

Ferroelectric and antiferroelectric chiral multilactate liquid crystalline materials with negative dielectric anisotropy

In this work, the mesomorphic, electro-optic and dielectric properties have been discussed in the light of molecular structure-property correlations of two chiral multilactate liquid crystalline materials possessing the orthogonal paraelectric Smectic A* phase, tilted ferroelectric Smectic C* phase and the tilted antiferroelectric Smectic CA* phase, over a substantially broad temperature range. Interestingly, a reasonably rare re-entrant Smectic C* phase (SmCre*) has also been identified in one of the investigated materials. These materials differ in their linkage groups (keto or ether) and an additional chiral unit in the terminal chain. The phase transition temperatures and transition enthalpies were determined from Polarizing Optical Microscopy and Differential Scanning Calorimetry (DSC) measurements. The compounds exhibit negative dielectric anisotropy (Δε) throughout the mesomorphic range (maximum −18 and −4 in SmA* for both the compounds) and moderately high values of spontaneous polarization (∼153 nC/cm2 in SmCre* phase). The temperature dependence of the response time (τ), bulk viscosity (η) and the activation energies (Ea) throughout the mesomorphic phase have been determined from the spontaneous polarization measurements. To emphasize the structure-property correlations in more detail, dielectric spectroscopy measurement has also been performed to measure the dielectric strength, dielectric loss, frequency dependent permittivities, relaxation time and relaxation frequencies. The clear evidence of the relatively rare SmCre* phase has also been confirmed from the temperature and frequency dependence of the dielectric permittivity. These results shed important light on the emergence of these materials as a smart alternative for their application in multicomponent mixtures targeted for advanced electro-optic and photonic devices.

Structural, optical, and electrical characteristics of anatase titanium dioxide tailored by doping of nitrogen and copper ions

Pure anatase TiO2 nanoparticles and its mono–doped and co–doped derivatives [i.e. (TiN0.007O1.993); (Ti0.998Cu0.002O2); (Ti0.998Cu0.002N0.007O1.993)] were prepared by sol–gel auto–combustion technique. Further, the effects of copper (Cu) and nitrogen (N) dopants have been investigated on structural, optical and dielectric properties of nanostructured TiO2 using X–ray diffraction (XRD), Raman spectroscopy, ultraviolet–visible (UV–Vis) spectroscopy and dielectric spectroscopy measurement respectively. The Rietveld refinement analysis of XRD data and Raman spectra revealed that all the synthesized samples have pure anatase phase having tetragonal structure with space group of I41/amd. The pure anatase phase of doped samples illustrate the substitution of Cu ions at Ti4+ sites and N ions at O2− sites in the TiO2 host lattice. The crystallite size of TiO2 and its derivatives has been observed in the range of 11–14 nm. The band gap of TiO2 reduced from 3.2 to 1.9 eV with mono–doping and co–doping of the N and Cu in TiO2 lattice as confirmed by UV–Vis spectroscopy. This red–shift might be occur due to the possible formation of N–2p and Cu–3d localized levels (mono–doping case), and the creation of isolated intermediate states (co–doping case). The dielectric spectroscopy was carried out to investigate the electrical properties in details and explained in terms of structural and intrinsic ionic behaviour of different dopants. The detected band gap energies in N/Cu mono–doped and co–doped anatase TiO2 fall within the visible spectrum, rendering them suitable for harnessing solar energy in photocatalysis and photovoltaic applications.

Synergistic effect of WO3 on structural, physical, optical, and dielectric characteristics of multicomponent borate glasses for optoelectronic applications

This study demonstrates the promising potential of WO3-doped calcium lithium silicate borate glasses as a multifunctional material with adjustable characteristics for a range of current technological purposes. The melt quenching technique was used for the manufacture of calcium lithium silicate borate glass samples doped with WO3 with a chemical composition of (50-x)B2O3+10SiO2+15CaO+25Li2O + xWO3, where x = 0, 1, 2, 3, and 5 mol%. Raman spectroscopy and UV optical absorption methods were used to investigate the spectroscopic characteristics of glass samples. The dielectric characteristics of the produced glass samples were investigated by broadband dielectric spectroscopy (BDS) measurements. The extremely short-range ordering structural matrices revealed by X-ray diffraction have validated the amorphous nature. The Raman spectra of the calcium lithium silicate borate glass exhibit considerable differences from those of glasses containing WO3. The prepared glass samples exhibited an obvious relationship between the replacement of WO3 and their density and molar volume. As a result of a modification in the structure, the values of packing density (Vp) and oxygen packing density (OPD) decrease as the molar concentration of WO3 increases. The inclusion of WO3 increased the optical absorbance of the synthesized glasses, as demonstrated by UV–Vis optical absorption spectra. According to the dielectric characteristics, the dielectric loss and dielectric constant decrease with frequency, while the AC electrical conductivity exhibits a progressive increase.

Computational dielectric spectroscopy on solid-solution interface by time-dependent voltage applied molecular dynamics simulation.

A frequency-dependent dielectric constant characterizes the dielectric response of a medium and also represents the time scale of system's collective dynamics. Although it is valuable not only academically but also practically for developing advanced devices, getting the value of a solution at the interface with a solid or electrode surface is challenging both experimentally and computationally. Here, we propose a computational method that imitates the dielectric spectroscopy and AC impedance measurement. It combines a time-dependent voltage applied molecular dynamics simulation with an equivalent circuit representation of a system composed of a solution confined between two identical electrodes. It gives the frequency-dependent dielectric constants of the bulk solution and the interface simultaneously. Unlike the conventional method, it does not require computation of a dipole autocorrelation function and its Fourier transformation. Application of the method on a system of water confined between polarizable Pt electrodes gives the static dielectric constant and the relaxation time of the bulk water in good agreement with previous simulation results and experimental values. In addition, it gives a much smaller static dielectric constant at the interface, consistent with previous observations. The outline of the dielectric dispersion curve of the interface seems similar to that of the bulk, but the relaxation time is several times faster.

Fabrication of Poly(ethylene furanoate)/Silver and Titanium Dioxide Nanocomposites with Improved Thermal and Antimicrobial Properties.

Poly(ethylene furanoate) (PEF)-based nanocomposites were fabricated with silver (Ag) and titanium dioxide (TiO2) nanoparticles by the in-situ polymerization method. The importance of this research work is to extend the usage of PEF-based nanocomposites with improved material properties. The PEF-Ag and PEF-TiO2 nanocomposites showed a significant improvement in color concentration, as determined by the color colorimeter. Scanning electron microscopy (SEM) photographs revealed the appearance of small aggregates on the surface of nanocomposites. According to crystallinity investigations, neat PEF and nanocomposites exhibit crystalline fraction between 0-6%, whereas annealed samples showed a degree of crystallinity value above 25%. Combining the structural and molecular dynamics observations from broadband dielectric spectroscopy (BDS) measurements found strong interactions between polymer chains and nanoparticles. Contact angle results exhibited a decrease in the wetting angle of nanocomposites compared to neat PEF. Finally, antimicrobial studies have been conducted, reporting a significant rise in inhibition of over 15% for both nanocomposite films against gram-positive and gram-negative bacteria. From the overall results, the synthesized PEF-based nanocomposites with enhanced thermal and antimicrobial properties may be optimized and utilized for the secondary packaging (unintended food-contact) materials.

Exploring the surge current degradation of natural ester oil-based nanofluids

The surge endurance of natural ester oil-based nanofluids against surge events is investigated experimentally. The focus of this work is the examination, through dielectric spectroscopy measurements, of the alteration of the real and imaginary parts of the complex relative permittivity of iron oxide nanofluids as a result of an accelerated degradation test employing a sequence of repetitive current impulses produced via a 12 kV/6 kA combination wave generator. The target is the exploration of a possible implementation of nanofluids as multipurpose liquids that act, in addition to insulation and coolants, as surge absorption media. Promising experimental results are discussed and compared with those of mineral oil that is widely used as a conventional insulating liquid in power transformers.

Dynamics of polylactic acid under ultrafine nanoconfinement: The collective interface effect and the spatial gradient.

Polymers under nanoconfinement can exhibit large alterations in dynamics from their bulk values due to an interface effect. However, understanding the interface effect remains a challenge, especially in the ultrafine nanoconfinement region. In this work, we prepare new geometries with ultrafine nanoconfinement ∼10nm through controlled distributions of the crystalline phases and the amorphous phases of a model semi-crystalline polymer, i.e., the polylactic acid. The broadband dielectric spectroscopy measurements show that ultrafine nanoconfinement leads to a large elevation in the glass transition temperature and a strong increment in the polymer fragility index. Moreover, new relaxation time profile analyses demonstrate a spatial gradient that can be well described by either a single-exponential decay or a double-exponential decay functional form near the middle of the film with a collective interface effect. However, the dynamics at the 1-2nm vicinity of the interface exhibit a power-law decay that is different from the single-exponential decay or double-exponential decay functional forms as predicted by theories. Thus, these results call for further investigations of the interface effect on polymer dynamics, especially for interfaces with perturbed chain packing.

Modeling the Interface Between Phases in Dense Polymer‐Carbon Black Nanoparticle Composites by Dielectric Spectroscopy: Where Are We Now and What are the Opportunities?

AbstractThe macroscopic properties of polymer nanocomposites (PNC) rely largely on the interphase between the polymer chains and the filler particles. One significant difficulty to solve this issue is to quantitatively model the structure‐property correlations due to the interfacial region in these complex materials. While dielectric spectroscopy (DS) measurements are routinely used to characterize the effective permittivity of filled polymers, fitting standard effective medium models and mixing equations to these data remains notoriously difficult to interpret. This is due to the absence of explicit reference to internal length scales characterizing the interfaces in the PNC. As an illustrative example, a two‐level homogenization framework is proposed which enables the extraction of useful information on the impact of a thin interphase confined on a nanometer length scale based on broadband DS data. This model leads to new ways of tuning the interphase so as to optimize the material's response to electric field, a situation relevant for electromagnetic shielding. This approach provides guidance on how to observe directly and experimentally the actual properties of the interface between the phases (as opposed to model‐based inference). Aside from its secure physical foundation in the theory of effective medium, a significant advantage of this approach is that a genetic algorithm (GA) technique applied to this physics‐based model enables the uniqueness of the fit parameters to be considered, as the GA method is robust in terms of finding globally optimum solutions, therefore placing confidence in non‐universal values of the percolation exponents. Recent work in physics‐informed machine learning indicates that the effective dielectric properties of PNC with many degrees of freedom due to their complex morphology can be described by considering only a few degrees of freedom describing the interface features between the phases in these composites.

Interfacial polarization-driven relaxation in CuO epitaxial thin films

In this manuscript, we examine the electrical behavior of pulse laser deposition grown epitaxial (111) oriented CuO thin films using impedance spectroscopy to understand the microscopic origin of their relaxor-like characteristics. Temperature (T) dependent variation of the real part of dielectric permittivity (ε′) shows a relaxor ferroelectric-like anomaly with Vogel–Fulcher relation fitting well with the observed dielectric behavior, and thus, pointing toward a relaxor ferroelectric nature of the CuO thin film. However, the loss tangent and frequency-dependent dielectric spectroscopy measurements suggest the need to further explore the different mechanisms to understand the origin of observed relaxor behavior. Deconvolution of the impedance spectra reveals that interfacial contributions dominate in the dielectric response. Moreover, deconvoluted capacitances are temperature-independent within the specified temperature range, thereby excluding the possibility of a ferroelectric transition suggested by ε′ vs T data. The DC bias measurement of dielectric permittivity and I–V measurements reveal the MW (Maxwell–Wagner) nature of the observed dielectric anomaly. The measurements also suggest interface-limited Schottky conduction as the predominant conduction mechanism in the CuO thin films. This work demonstrates that the apparent relaxor behavior observed in the CuO thin film is related to extrinsic, i.e., interfacial polarization effect, instead of the intrinsic ferroelectric nature of the material.

Constructing Novel High Dielectric Constant Polyimides Containing Dipolar Pendant Groups with Enhanced Orientational Polarization.

Polymer dielectrics with high dielectric constant are urgently demanded for potential electrical and pulsed power applications. The design of polymers with side chains containing dipolar groups is considered an effective method for preparing materials with a high dielectric constant and low loss. This study synthesizes and comprehensively compare the dielectric properties of novel polyimides with side chains containing urea (BU-PI), carbamate (BC-PI), and sulfonyl (BS-PI) functional groups. The novel polyimides exhibit relatively high dielectric constant and low dielectric loss values due to the enhanced orientational polarization and suppressed dipole-dipole interactions of dipolar groups. In particular, BU-PI containing urea pendant groups presents the highest dielectric constant of 6.14 and reasonably low dielectric loss value of 0.0097. The strong γ transitions with low activation energies derived from dielectric spectroscopy measurements have been further evaluated to demonstrate the enhanced free rotational motion of urea pendant dipoles. In energy storage applications, BU-PI achieves a discharged energy density of 6.92 J cm-3 and a charge-discharge efficiency above 83% at 500 MV m-1. This study demonstrates that urea group, as dipolar pendant group, can provide polymers with better dielectric properties than the most commonly used sulfonyl groups.

Hybrid nanofillers loaded epoxy resin; Synthesis, characterizations, and dielectric spectroscopy

In the current work, synthesis, structural, magnetic, and dielectric characterization of nanofillers doped epoxy composites were studied deeply. Bisphenol A-(epichlorohydrin): epoxy and hardener N(3-dimethylaminopropyl)-1,3-propylene diamine was used to prepare epoxy composite and nano epoxy composites. (CoFe2O4 + Fe3O4), and (NiFe2O4 + CoFe2O4) hybrid nanofillers were used as nanofillers. The structural information of neat epoxy and nano-epoxy composites was obtained by XRD. To understand the actual chemical changes, the nature of bonding and interaction mechanism between the nano-particles and the neat epoxy; the structural chemistry and surface functionality of nano-epoxy composites were examined through Fourier transform infrared spectroscopy (FTIR). Moreover, vibrational sample magnetometer (VSM) measurements were done to gain additive information about the magnetic properties of nanoparticle-loaded epoxy composites. Dielectric spectroscopy measurements of nano epoxy composites were carried out using a precision LCR meter in the frequency range of 1 kHz to 2 MHz and with the help of a vector network analyzer along with SPEAG dielectric assessment kit for thin layers over the frequency range of 200 MHz to 20 GHz at room temperature. The influence of nano-fillers on the dielectric properties of neat epoxy composites is discussed thoroughly.

In situ process analytical technology for real time viable cell density and cell viability during live-virus vaccine production

Viable cell density (VCD) and cell viability (CV) are key performance indicators of cell culture processes in biopharmaceutical production of biologics and vaccines. Traditional methods for monitoring VCD and CV involve offline cell counting assays that are both labor intensive and prone to high variability, resulting in sparse sampling and uncertainty in the obtained data. Process analytical technology (PAT) approaches offer a means to address these challenges. Specifically, in situ probe-based measurements of dielectric spectroscopy (also commonly known as capacitance) can characterize VCD and CV continuously in real time throughout an entire process, enabling robust process characterization. In this work, we propose in situ dielectric spectroscopy as a PAT tool for real time analysis of live-virus vaccine (LVV) production. Dielectric spectroscopy was collected across 25 discreet frequencies, offering a thorough evaluation of the proposed technology. Correlation of this PAT methodology to traditional offline cell counting assays was performed, in which VCD and CV were both successfully predicted using dielectric spectroscopy. Both univariate and multivariate data analysis approaches were evaluated for their potential to establish correlation between the in situ dielectric spectroscopy and offline measurements. Univariate analysis strategies are presented for optimal single frequency selection. Multivariate analysis, in the form of partial least squares (PLS) regression, produced significantly higher correlations between dielectric spectroscopy and offline VCD and CV data, as compared to univariate analysis. Specifically, by leveraging multivariate analysis of dielectric information from all 25 spectroscopic frequencies measured, PLS models performed significantly better than univariate models. This is particularly evident during cell death, where tracking VCD and CV have historically presented the greatest challenge. The results of this work demonstrate the potential of both single and multiple frequency dielectric spectroscopy measurements for enabling robust LVV process characterization, suggesting that broader application of in situ dielectric spectroscopy as a PAT tool in LVV processes can provide significantly improved process understanding. To the best of our knowledge, this is the first report of in situ dielectric spectroscopy with multivariate analysis to successfully predict VCD and CV in real time during live virus-based vaccine production.

Effect of Ion Mass on Dynamic Correlations in Ionic Liquids.

Ionic liquids (ILs) are a class of liquid salts with distinct properties such as high ionic conductivity, low volatility, and a broad electrochemical window, making them appealing for use in energy storage applications. The ion-ion correlations are some of the key factors that play a critical role in the ionic conductivity of ILs. In this work, we present the study of the impact of ion mass on ion-ion correlations in ILs, applying a combination of broadband dielectric spectroscopy measurements and molecular dynamics simulations. We examined three ILs with the same cation but different anions to consider three different cases of cation-anion masses: M+ > M-, M+ ≈ M-, and M+ < M-. We applied the momentum conservation approach to estimate the contribution of distinct ion-ion correlations from experimental data and obtained good agreement with direct calculations of distinct ion-ion correlations from molecular dynamics simulations. Our findings reveal that relative ion mass has a strong effect on the distinct ion-ion correlations, leading to swapping of the relative amplitude of distinct cation-cation and anion-anion correlations.

Study of the Structural, Electrical, and Mechanical Properties and Morphological Features of Y-Doped CeO2 Ceramics with Porous Structure

In this work, ceramic samples of cerium oxide doped with yttrium were investigated. The concentration of a dopant Y(NO3)3 varied from 5 to 25 wt% in the initial charge. In the course of the experiment, a simple method was developed to obtain ceramics with a porosity of ~20% via one-step annealing in air in a muffle furnace. For comparison, samples with two annealings were also synthesized to determine the effects of pores on electrical, structural, and mechanical characteristics. The obtained samples were examined via X-ray powder diffraction, scanning electron microscopy, X-ray energy dispersive spectroscopy, Raman spectroscopy, dielectric spectroscopy, and Vickers microhardness measurements. The substitution of Ce4+ ions with Y3+ ions led to a significant decrease in the lattice parameter, average crystallite size, and average grain size, with a simultaneous increase in the lattice defectivity, dielectric constant, electrical conductivity, and microhardness values. It is shown that samples with a dopant weight fraction of 0.05–0.15 and one-step annealing have favorable electrical and mechanical characteristics for energy applications as porous materials with ionic conductivity.

Magnetic and Electrical Characteristics of Nd3+ and Mn2+-Co-doped Calcium Molybdato-Tungstates Single Crystals.

Single crystals of Ca1-3x-yMny□xNd2x(MoO4)1-3x(WO4)3x molybdato-tungstates (□ denotes vacant sites) with a scheelite-type structure have been successfully grown by the Czochralski technique in an inert atmosphere. This paper presents the results of structural, optical, magnetic, and electrical properties, as well as the broadband dielectric spectroscopy measurements of single crystals with different Nd3+ ion concentrations, i.e., when x = 0.0050 or x = 0.0098, and with constant content of Mn2+ ions, i.e., when y = 0.0050. Our magnetic studies have shown that substitution of diamagnetic Ca2+ ions in the CaMoO4 matrix with paramagnetic Nd3+ ones with a content not exceeding 0.02 and having a screened 4f-shell revealed a significant effect of orbital diamagnetism and Van Vleck's paramagnetism. Both single crystals have revealed residual electrical conductivity without an intrinsic region and a change of sign of the Seebeck coefficient at ca. 230 K. Dielectric spectroscopy measurements have shown constant values of relative permittivity (εr ∼ 8) and loss tangent (tan δ ∼ 0.01) both up to 400 K and up to 1 MHz, as well as the Fermi energy (∼0.04 eV) and the Fermi temperature (∼500 K) determined for both crystals from the diffusion component of thermopower. These results suggest the presence of shallow acceptor and donor levels in the studied crystals.

Unravelling hydrogen bond network in methanol-propanol mixtures via molecular dynamics simulation and experimental techniques

ABSTRACT Hydrogen-bonded networks in 1-propanol-methanol binary mixture are studied using molecular dynamics simulation along with experimental techniques (FTIR, dielectric spectroscopy and refractive index measurements) for the entire concentration range. The structure of hydrogen-bonded networks is studied through radial distribution function, hydrogen bond statistics and graph theoretical analysis from molecular dynamics. It is observed that the probability of hydrogen bonding is maximum in methanol molecules followed by hydrogen bonding between methanol and 1-propanol molecules and minimum among 1-propanol molecules, as the concentration changes. The graph theory results show the formation of linear chain hydrogen bond networks, with no caged structures, which is validated from the experimental results. Further, the deconvolution of the FTIR OH peak suggests the presence of linear multimers in all concentrations of the binary system. Average degree of the hydrogen-bonded networks from graph theory indicates a complex networks among pure alcohols and dimers between methanol and 1-propanol in their binary mixtures at all concentrations. The negative values of excess permittivity indicate that the components of the mixture interact in a manner such that the net dipole polarisation decreases.

Compositional Influence of Synthesized Magnetic Nanoparticles on Epoxy Composites: Dielectric, Magnetic, and Optical Characteristics

Epoxy nano-magnetic composites exhibit remarkable and promising properties by synergistically combining the properties of epoxy resin and magnetic nanofillers. The current study deals with the synthesis of Fe3O4, NiFe2O4, and CoFe2O4 nanoparticles and their respective nanoparticles-doped epoxy composites, as well as the structural, optical, and dielectric characterization of the resultant nano-composites. To investigate the surface morphology of the synthesized nanoparticles, field emission electron microscopy (FESEM) analysis was employed. By measuring electron diffraction spectroscopy (EDS), the presence of various chemicals was verified. X-ray diffraction (XRD) was used to determine the structural details of the synthesized nanoparticles and nanoparticles-doped epoxy composites. The structural chemistry and surface functionality of the nano-epoxy composites were investigated using Fourier transform infrared spectroscopy (FTIR). The magnetic properties of the synthesized nanoparticles and nanoparticles loaded epoxy composites were also studied using a vibrating sample magnetometer (VSM). UV–visible reflection spectroscopy was also carried out to find the optical properties of the synthesized nanoparticles, neat (undoped) epoxy, and nanoparticles-doped epoxy composites. Dielectric spectroscopy measurements of nanoparticles-doped epoxy composites were performed using an Agilent E4980A precision LCR (Inductance Capacitance Resistance) meter with an Agilent 16451B-test fixture LCR and vector network analyzer (VNA) in the frequency span of 10 kHz to 2 MHz and 200 MHz to 20 GHz, respectively. The influence of the synthesized nanoparticles on the neat (undoped) epoxy composites and the results in view of future applications are fully discussed.

Room-Temperature, Nanoscale Multiferroic Pb(Fe0.5Ta0.5)1−x(Zr0.53Ti0.47)xO3 (x = 0.2, 0.3) Thin Films Grown via the Pulsed Laser Deposition Technique

Multiferroic materials capable of robust magnetoelectric coupling at room temperature are currently being explored for their possible multifunctional device applications. Highly (100)-oriented Pb(Fe0.5Ta0.5)x(Zr0.53Ti0.47)1−x (PZTFTx) thin films (x = 0.2 and 0.3) with a thickness of about 300 nm were grown on La0.67Sr0.33CoO3 (LSCO)-buffered MgO 100-oriented substrates via the pulsed laser deposition method. An analysis of their X-ray diffraction patterns suggests the stabilization of the orthorhombic phase in the thin films at room temperature. Dielectric spectroscopic measurements of the metal–insulator–metal (Pt/PZTFTx/LSCO) thin-film capacitors as a function of temperature revealed a diffuse ferroelectric-to-paraelectric phase transition around Tm ~520 and 560 K for the x = 0.2 and 0.3 thin films, respectively. Well-saturated electrical hysteresis loops with large remanent (Pr) and saturation (Ps) polarizations were observed in these capacitors, which indicates the establishment of intrinsic ferroelectric ordering in the thin films at room temperature. These thin films retained ferromagnetic/ferrimagnetic ordering up to 300 K and showed saturation magnetization values of 8.3 (x = 0.2) and 6.1 (x = 0.3) emu/cm3 at room temperature. The magnetoelectric coupling constants of 2040 mV/cmOe (x = 0.2) and 850 mV/cmOe (x = 0.3), respectively, were obtained at an in-plane bias field at room temperature. The present study demonstrates that PZTFTx thin films are multiferroic at room temperature with large magnetoelectric couplings, and these materials may be suitable for use in magnetic sensors and spintronic device applications.

Fluorinated esters with a very broad temperature range of the antiferroelectric phase

ABSTRACT Antiferroelectricity is a desirable property of liquid crystalline materials. Therefore, we synthesised and studied two new chiral rod-like mesogens with a molecular core based on two biphenyls connected via ester linkage, with the phenyl substituted by a fluorine atom. The studied mesogens are characterised by nuclear magnetic resonance spectroscopy and mass spectrometry analysis. They have methyl heptyl in the chiral chain and exhibit an antiferroelectric phase in a very broad temperature range. We investigated their mesomorphic properties and confirmed the phase identification by differential scanning calorimetry and broad-frequency dielectric spectroscopy measurements. Additionally, we compared the studied mesogens with previously synthesised analogous materials. Two mixtures were formulated using a base mixture and new mesogens. The helical pitch of the synthesised mesogens and formulated mixtures was estimated using the selective reflection method.

Electrostrictive and piezoelectrical properties of chitosan-poly(3-hydroxybutyrate) blend films

Herein, we report the high apparent piezoelectric coefficient for chitosan-poly(3-hydroxybutyrate) (CS-PHB) blend films. The structure of chitosan-poly(3-hydroxybutyrate) (CS-PHB) blend films, exploiting characteristics such as dielectric, polarization, apparent piezoelectric properties, and their dependencies on the composition, were investigated. Based on the results of XRD, SEM, FTIR, PFM, and dielectric spectroscopy measurements, the structure of CS-PHB blend films has been proposed, which consists of spheric-like inclusion formed by precipitating isotactic-PHB interface layer, which consists of syndiotactic-PHB hydrogen bonding with CS, and CS matrix. The synergistic effects of piezoelectricity and electrostriction help explain the high value of the apparent piezoelectric coefficient (d33) obtained in the blend film with 13 wt% of PHB (d33 ≈ 200 pC/N). The investigated CS-PHB blend films are a good candidate for tissue engineering applications.