Dielectric Properties Of Various Materials Research Articles

Terahertz free‐space dielectric property measurements using time‐ and frequency‐domain setups

Based on a simple and effective calculation method, two free-space measurement setups are employed to investigate the dielectric properties of various materials at terahertz (THz) frequencies. One setup involves THZ time-domain spectroscopy (THz-TDS) at a frequency range of 0.4 to 1 THz. The other setup comprises a vector network analyzer (VNA) with pairs of VAN extenders (VNAXs) and diagonal standard gain horns (SGHs) at a frequency range of 0.22 to 1.1 THz. The calculation method is verified for the THz-TDS system and employed in the VNA system for the first time. Dielectric properties, including refractive indices, power absorption coefficients, relative permittivities, and loss tangents, are calculated from measured transmission data. Several materials, including printed circuit boards and 3D printing materials, are characterized to verify the calculation method and compare the measurement setups.

Improved electrode positions for local impedance measurements in the lung—a simulation study

Impedance spectroscopy can be used to analyze the dielectric properties of various materials. In the biomedical domain, it is used as bioimpedance spectroscopy (BIS) to analyze the composition of body tissue. Being a non-invasive, real-time capable technique, it is a promising modality, especially in the field of lung monitoring. Unfortunately, up to now, BIS does not provide any regional lung information as the electrodes are usually placed in hand-to-hand or transthoracic configurations. Even though transthoracic electrode configurations are in general capable of monitoring the lung, no focusing to specific regions is achieved. In order to resolve this issue, we use a finite element model (FEM) of the human body to study the effect of different electrode configurations on measured BIS data. We present evaluation results and show suitable electrode configurations for eight lung regions. We show that, using these optimized configurations, BIS measurements can be focused to desired regions allowing local lung analysis.

Observation of terahertz-radiation-induced ionization in a single nano island.

Terahertz (THz) electromagnetic wave has been widely used as a spectroscopic probe to detect the collective vibrational mode in vast molecular systems and investigate dielectric properties of various materials. Recent technological advances in generating intense THz radiation and the emergence of THz plasmonics operating with nanoscale structures have opened up new pathways toward THz applications. Here, we present a new opportunity in engineering the state of matter at the atomic scale using THz wave and a metallic nanostructure. We show that a medium strength THz radiation of 22 kV/cm can induce ionization of ambient carbon atoms through interaction with a metallic nanostructure. The prepared structure, made of a nano slot antenna and a nano island located at the center, acts as a nanogap capacitor and enhances the local electric field by two orders of magnitudes thereby causing the ionization of ambient carbon atoms. Ionization and accumulation of carbon atoms are also observed through the change of the resonant condition of the nano slot antenna and the shift of the characteristic mode in the spectrum of the transmitted THz waves.

IMAGING OF 3-D DIELECTRIC OBJECTS USING FAR-FIELD HOLOGRAPHIC MICROWAVE IMAGING TECHNIQUE

This paper describes the working principle of a three-dimensional (3-D) holographic microwave imaging (HMI) method for imaging small inclusion embedded in a dielectric object. Using published dielectric properties of various materials, a 3-D mathematical model is developed under the MATLAB environment to validate the HMI on various dielectric objects. Results indicate that the 3-D HMI has an ability to produce a 3-D image and detect small inclusions embedded within a dielectric object. Several potential applications of the 3-D HMI method includes biological tissues imaging, security screening and packaged food evaluation.

Miniaturized FPGA-Based High-Resolution Time-Domain Reflectometer

Time-domain reflectometry (TDR) is a well-known measurement principle for evaluating frequency-dependent electric and dielectric properties of various materials and substances. Although TDR is a proven method, the high price for TDR measurement equipment and complex laboratory setups is often a limiting factor for cost-sensitive applications or large-scale field experiments, where a large number of TDR meters is required. This paper reports on the development of a new miniaturized low-cost TDR meter capable of sampling a repetitive rectangular waveform, which is used as an excitation signal. The developed sampling circuit is based on a digital delta modulator (DM) and allows for capturing the waveform of a repetitive measurement signal. A 1-MHz signal can be captured with a virtual sampling resolution of 1 ps within a measurement interval of 1 s. The generated pulses have a rise time of 2 ns and can be captured with an amplitude resolution of approximately 10 bit and an accuracy of approximately 8 bit. The developed digital DM architecture is implemented inside a small field programmable gate array and integrated into a miniaturized low-power TDR meter prototype for battery-powered outdoor applications. The captured measurement data are stored on integrated micro-SD card memory and can be read out either via a Universal Serial Bus, an RS-485 bus system, or a wireless interface. The TDR meter is controlled by an integrated microcontroller and a real-time clock and therefore can operate completely independent from any additional control setup. The TDR meter targets applications within the field of geoscience and agricultural monitoring, where large-scale measurement systems are required.

TDR moisture measurements in granular materials: From the siliceous sand test case to the applications for agro-food industrial monitoring

Different approaches are commonly available for the continuous monitoring of moisture and dielectric properties of various materials. In particular Time Domain Reflectometry (TDR) is the standard method for measuring soil water content. Nevertheless, the state of the art is rather lacking in assessing specific calibration procedures allowing the accurate moisture monitoring of granular materials. To fill this gap, the adoption of TDR for such purposes is investigated. Starting from measurements on siliceous sand, an in-depth analysis is extended to various feedstuff materials (such as corn, corn flour and bran). Furthermore, the adopted methodology is fully assessed from a metrological point of view, thus confirming its suitability for the considered applications.

Detection of Ungrouted Cells in Concrete Masonry Constructions Using a Dielectric Variation Approach

In this study, a new technique for detecting ungrouted cells in concrete block masonry constructions was developed. The concept, based on detecting the local dielectric permittivity variations, was employed to design coplanar capacitance sensors with high sensitivities to detect such construction defects. An analytical model and finite element simulations were used to assess the influence of the sensor geometrical parameters on the sensor signals and to optimize the sensor design. To experimentally verify the model, the dielectric properties of various materials involved in concrete masonry walls were measured. In addition, a masonry wall containing predetermined grouted and ungrouted cells was constructed and inspected using the developed sensors in a laboratory setting. Moreover, different capacitance sensors were designed and compared with respect to their sensitivity, signal-to-noise ratio, and coefficient of variation of the inspected measurements. Excellent agreements were found between the experime...

Damage Detection of FRP-Strengthened Concrete Structures Using Capacitance Measurements

In this study, a new concept for detecting air voids, water intrusion, and glue infiltration damages in fiber-reinforced polymers (FRPs)-strengthened concrete structures was developed. The concept, based on detecting the local dielectric permittivity variations, was employed to design coplanar capacitance sensors (CCSs) to detect such defects. An analytical model was used to introduce the sensor operation theory and analyze the influence of different sensor parameters on the output signals and to optimize sensor design. Two dimensional finite element (FE) simulations were performed to assess the validity of the analytical results and to evaluate other sensor design-related parameters. To experimentally verify the FE model, dielectric properties of various materials involved in FRP-strengthened concrete systems were measured. In addition, two concrete specimens strengthened with FRP laminates and containing preinduced defects were constructed and inspected in a laboratory setting. Good agreement was found ...

Time domain reflectrometry: Calibration techniques for accurate measurement of the dielectric properties of various materials

In this work, an extensive theoretical and experimental analysis has been carried out on the main factors that affect the accurate evaluation of dielectric properties using time domain reflectometry (TDR). Dielectric constant measurements have been performed under different experimental conditions for various types of materials having a wide range of permittivity values. Interpretation of the results on the basis of the transmission-line theory emphasizes the importance of a suitable calibration procedure that takes into account several critical aspects, some of which seem to have been disregarded or underestimated in the literature. Qualitative and quantitative information is given on the kind of corrections needed in order to significantly improve the reliability of the TDR technique for permittivity measurements.

Use of Microwaves for Damage Detection of Fiber Reinforced Polymer-Wrapped Concrete Structures

Jacketing technology using fiber reinforced polymer (FRP) composites is being applied for seismic retrofit and rehabilitation of reinforced concrete (RC) columns designed and constructed under older specifications. In this study, the authors develop an electromagnetic (EM) imaging technology for detecting such damage as voids and debonding between the jacket and the column, which may significantly weaken the structural performance of the column otherwise attainable by jacketing. This technology is based on the reflection analysis of a continuous EM wave sent toward and reflected from layered FRP–adhesive-concrete medium: Voids and debonding areas will generate air gaps which produce additional reflections of the EM wave. In this study, dielectric properties of various materials involved in the FRP-jacketed RC column were first measured using a plane-wave reflectometer. The measured properties were then used for a computer simulation of the proposed EM imaging technology. The simulation demonstrated the difficulty in detecting damage by using plane waves, as the reflection contribution from the voids and debonding is very small compared to that from the jacketed column. In order to alleviate this difficulty, dielectric lenses were designed and fabricated, focusing the EM wave on the bonding interface. Finally, three concrete columns were constructed and wrapped with glass–FRP jackets with various voids and debonding conditions artificially introduced in the bonding interface. Using the proposed EM imaging technology involving the especially designed and properly installed lenses, these voids and debonding areas were successfully detected. This technology can be used to assess the jacket bonding quality during the initial jacket installation stage and to detect debonding between the column and the jacket caused by earthquake and other destructive loads.

Interaction of ions and molecules with surface modes in cylindrical channels in solids

The interaction of ions and molecules with surface modes in cylindrical channels in solids is described on the basis of the dielectric formalism, starting with simple dielectric models and using also more realistic descriptions of the dielectric properties of various materials of experimental interest. The response of the medium is first characterized in terms of the wake potential, calculating the main effects on the moving particles, including self-energy values, stopping and lateral forces. The general scaling properties of the main quantities as well as the effects of plasmon damping in real materials are described. The formulation is extended to ion clusters and molecular composites, introducing new form factors to take into account the cylindrical symmetry of the problem. Applications to simple ions, diclusters, dipoles, and polar molecules channeled in microcapillaries and nanochannels are considered.