Dielectric Barrier Discharge Ionization Source Research Articles

Recent Advances in Single-Cell Metabolomics Based on Mass Spectrometry

Recent Advances in Single-Cell Metabolomics Based on Mass Spectrometry

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method.

A novel sample introduction and ionization method for trace explosives detection is proposed and investigated herein, taking into consideration real-world application requirements. A thermal desorption sampling method and dielectric barrier discharge ionization (DBDI) source, with air as the discharge gas, were developed. The counter flow method was adopted firstly into the DBDI source to remove the interference of ozone and other reactive nitrogen oxides. A separated reaction region with an ion guiding electric field was developed for ionization of the sample molecules. Coupled with a homemade miniature digital linear ion trap mass spectrometer, this compact and robust design, with further optimization, has the advantages of soft ionization, a low detection limit, is free of reagent and consumable gas, and is an easy sample introduction. A range of common nitro-based explosives including TNT, 2,4-DNT, NG, RDX, PETN, and HMX has been studied. A linear response in the range of two orders of magnitude with a limit of detection (LOD) of 0.01 ng for TNT has been demonstrated. Application to the detection of real explosives and simulated mixed samples has also been explored. The work paves the path to developing next generation mass spectrometry (MS) based explosive trace detectors (ETDs).

Excited-State N Atoms Transform Aromatic Hydrocarbons into N-Heterocycles in Low-Temperature Plasmas.

The direct formation of N-heterocycles from aromatic hydrocarbons has been observed in nitrogen-based low-temperature plasmas; the mechanism of this unusual nitrogen-fixation reaction is the topic of this paper. We used homologous aromatic compounds to study their reaction with reactive nitrogen species (RNS) in a dielectric barrier discharge ionization (DBDI) source. Toluene (C7H8) served as a model compound to study the reaction in detail, which leads to the formation of two major products at "high" plasma voltage: a nitrogen-replacement product yielding protonated methylpyridine (C6H8N+) and a protonated nitrogen-addition (C7H8N+) product. We complemented those studies by a series of experiments probing the potential mechanism. Using a series of selected-ion flow tube experiments, we found that N+, N2+, and N4+ react with toluene to form a small abundance of the N-addition product, while N(4S) reacted with toluene cations to form a fragment ion. We created a model for the RNS in the plasma using variable electron and neutral density attachment mass spectrometry in a flowing afterglow Langmuir probe apparatus. These experiments suggested that excited-state nitrogen atoms could be responsible for the N-replacement product. Density functional theory calculations confirmed that the reaction of excited-state nitrogen N(2P) and N(2D) with toluene ions can directly form protonated methylpyridine, ejecting a carbon atom from the aromatic ring. N(2P) is responsible for this reaction in our DBDI source as it has a sufficient lifetime in the plasma and was detected by optical emission spectroscopy measurements, showing an increasing intensity of N(2P) with increasing voltage.

Hybrid Ionization Source Combining Nanoelectrospray and Dielectric Barrier Discharge Ionization for the Simultaneous Detection of Polar and Nonpolar Compounds in Single Cells.

Single-cell metabolomics is expected to deliver fast and dynamic information on cell function; therefore, it requires rapid analysis of a wide variety of very small quantities of metabolites in living cells. In this work, a hybrid ionization source that combines nanoelectrospray ionization (nanoESI) and dielectric barrier discharge ionization (DBDI) is proposed for single-cell analysis. A capillary with a 1 μm i.d. tip was inserted into cells for sampling and then directly used as the nanoESI source for ionization of polar metabolites. In addition, a DBDI source was employed as a post-ionization source to improve the ionization of apolar metabolites in cells that are not easily ionized by ESI. By increasing the voltage of the DBDI source from 0 to 3.2 kV, the classes of detected metabolites can be shifted from mostly polar to both polar and apolar to mainly apolar. Plant cells (onion) and human cells (PANC-1) were investigated in this study. After optimization, 50 compounds in onion cells and 40 compounds in PANC-1 cells were observed in ESI mode (3.5 kV) and an additional 49 compounds in onion cells and 73 compounds in PANC-1 cells were detected in ESI (3.5 kV)-DBDI (2.6 kV) hybrid mode. This hybrid ionization source improves the coverage, ionization efficiency, and limit of detection of metabolites with different polarities and could potentially contribute to the fast-growing field of single-cell metabolomics.

Plug-and-play laser ablation-mass spectrometry for molecular imaging by means of dielectric barrier discharge ionization

The plug-and-play hyphenation of UV-laser ablation (LA) and mass spectrometry is presented, using dielectric barrier discharge ionization (DBDI). The DBDI source employed here is characterized by its unique geometry, being directly mounted onto the inlet capillary of a mass spectrometer. In the literature, this particular kind of DBDI source is also referred to as active capillary plasma ionization. It has been commercialized as soft ionization by chemical reaction in transfer (SICRIT) and will be addressed as DBDI in this study. LA-DBDI-MS was used for the direct, molecule-specific and spatially resolved analysis of various solid samples, such as coffee beans and pain killer tablets without extensive sample preparation. The combination of fast washout UV-laser ablation and the principle of the DBDI source used here allowed for highly efficient soft ionization as well as high spatial resolution down to 10 μm for molecular imaging.

Negative-mode mass spectrometric study on dc corona, ac corona and dielectric barrier discharge ionization in ambient air containing H2O2, 2,4,6-trinitrotoluene (TNT), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)

In this work, a miniature dielectric barrier discharge (m-DBD) ionization source was developed, and a comparative study of dc corona, ac corona and the m-DBD ionization in ambient air was made. As a very simple miniature dielectric barrier discharge ion source, a tip-sealed fused silica capillary (i.d.: 0.2 mm, o. d.: 0.35 mm) inserted with an acupuncture needle (body diameter: 0.12 mm) was used. While dc and ac corona discharge are glow-like, the m-DBD was more or less arc-like and it gave more abundant ions originating from fragmentation of analytes. When H2O2 vapor was introduced in the m-DBD plasma, the major ions O3−• and CO3−• generated in air were quickly annihilated by the reactions with H2O2. For 2,4,6-trinitrotoluene (TNT) introduced in the m-DBD plasma, [TNT − H + O]− (m/z 242), [TNT − CH3 + O]− (m/z 228), and [TNT − NO2 + O2]− (m/z 213) were detected which were almost absent in dc and ac corona discharge ionization. Their precursors may be the fragment neutral radical species generated from TNT exposed in the m-DBD plasma.Density functional theory (DFT) calculations predicted that O3−• and CO3−• react with H2O2 to form O2−•⋅⋅⋅H2O⋅⋅⋅⋅⋅O2, and O2−•⋅⋅⋅H2CO3, respectively. The stabilities and structures of the adduct ions of O2−•, HO2−, O3−•, CO3−•, HCO3−, NO3−, and HCO4− with H2O and H2O2 were also examined by highly accurate calculations.

Metal Probe Microextraction Coupled to Dielectric Barrier Discharge Ionization-Mass Spectrometry for Detecting Drug Residues in Organisms.

In this study, a novel method for the direct coupling of metal probe microextraction (MPME) and a dielectric barrier discharge ionization (DBDI) source with mass spectrometry (MS) is reported. Analytes adsorbed on a tungsten needle were directly transferred to the DBDI source via rapid thermal desorption, which resulted in a limit of detection as low as 8 pg/mL. This is in part due to the "active capillary" configuration of the plasma ion source, where the efficiency of ion transfer to the MS is ∼100%. Specialty gases to maintain the plasma and carry analytes to the MS are not required. In contrast to direct one-step ionization of molecular adsorbates, the complete separation of the analyte desorption from the probe and the ionization event in our experimental setup greatly enhanced the sensitivity and detection reproducibility (RSD of 8.3%). We show detection of pyrimethamine, a first-line drug for the treatment and prevention of Plasmodium falciparum malaria all over the world, by this MPME/DBDI/MS method. The detection of drug residues in live fish and paramecium was achieved without the need for any sample pretreatment. The relative concentration of the drug in different organs of the fish was determined. This simple and convenient method has the potential for the analysis of chemicals even in single-cell organisms.

A dielectric barrier discharge ion source increases thrust and efficiency of electroaerodynamic propulsion

Electroaerodynamic (EAD) propulsion, which produces a thrust force by electrostatic means, has been proposed as a method of electric airplane propulsion which is solid-state and nearly silent and produces no combustion emissions. Previous work demonstrated that EAD is capable of sustaining flight of heavier-than-air airplanes. The most successful EAD propulsion devices have thus far used a direct current (DC) corona discharge to produce ions and the same DC field to accelerate them. However, these corona discharge EAD devices are subject to a performance trade-off where increasing thrust reduces efficiency (thrust-to-power ratio). This is a key barrier to practical adoption. Here, we show that by using a dielectric barrier discharge (DBD) instead of a corona discharge to produce ions, while still using a DC field to accelerate them, higher thrust and thrust-to-power can be achieved. We identify operating regimes for this thruster, optimize the electrical characteristics of the DBD ion source, and find that the thrust-to-power can reach up to 20 N/kW at a thrust of 50 mN/m and up to 10 N/kW at 150 mN/m—in both cases, approximately twice that of the equivalent corona discharge devices. With lower power draw for the same thrust, DBD enhanced EAD propulsion devices could increase the endurance of EAD airplanes and begin to enable the design of practically useful solid-state aircraft.

High-throughput screening of PAHs and polar trace contaminants in water matrices by direct solid-phase microextraction coupled to a dielectric barrier discharge ionization source

Ambient mass spectrometry enables fast and direct analysis, requiring minimal or no sample preparation; these attributes have established it as the preferred technique for applications in numerous fields (e.g., biomedical, forensic, and environmental). Here we coupled an active capillary plasma ionization source based on a dielectric barrier discharge directly to solid-phase microextraction, achieving a quick (<10 min per sample), green (virtually no samples preparation and thus no solvents involved), sensitive (LODs up to 3 pg mL−1), robust (RSD of <20%), and quantitative (LDR ≥ 2 orders of magnitude) screening method. This study, moreover, shows that intrinsically poorer ionization efficiencies for low-polarity compounds (such as polycyclic aromatic hydrocarbons, PAHs), which precluded their ultra-trace detection, can be partially overcome by adding dopants and lowering the LODs into the pg mL−1 range. Results also show that the presence of these dopants greatly affects the ionization mechanism, resulting in the preferential formation of radical cations versus protonated PAHs. As a proof of concept, this method was applied to the detection of organic microcontaminants in different water matrices (such as tap, ground, and treated wastewater). Common contaminants (e.g., DEET, benzotriazole, β-estradiol) were tentatively detected and, if above the LOQ, quantified (i.e., DEET at 30 pg mL−1). These promising results evidence that this approach is interesting for quick (field) screening methods, and the newly increased efficiency for a larger polarity range additionally expands the range of possible applications.

Analysis of amphetaminic drug compounds in urine by headspace-dielectric barrier discharge ionization-mass spectrometry

Rapid detection of trace level amphetaminic drug compounds in urine is essential to monitor consumption of these abuse drugs by athletes. In this work, the amphetaminic drug compounds were spiked in human urine and analyzed using headspace – dielectric barrier discharge (DBD) ionization-mass spectrometry method. In the headspace method, the urine spiked drug compound was treated with alkali solution, thus the free base amphetaminic molecules were released into the gas phase. The gaseous molecules were then ionized by the DBD ion source placed in front of the mass spectrometer inlet under ambient condition. This method provided comparable sensitivity with the solid-phase microextraction (SPME) in analysis of the amphetaminic compounds where no derivatization or adduct formation was required. The present method also facilitated the sensitivity enhancement with about one order of magnitude in urine compared to standard solution. Carbonate alkali solution showed the highest sensitivity for detection of the drug compounds in urine and the sensitivity was enhanced by using NH3. The limits of detection (LODs) of the various amphetaminic molecules were found to be in the range of 0.10–0.80 ng/mL for standard solutions while those for urine were in the range of 0.04–0.40 ng/mL. The analytical figures of merit of this method were evaluated under ambient condition using suitable internal standard. Results suggested the suitability of this method for analytical routine work in detection of amine-based drugs in doping test and/or in forensic laboratories. A mechanism of enhanced sensitivity by the ammoniated carbonate alkali solution in urine is also discussed.

Direct Coupling of Solid-Phase Microextraction with Mass Spectrometry: Sub-pg/g Sensitivity Achieved Using a Dielectric Barrier Discharge Ionization Source.

We report a new strategy for the direct coupling of Solid-Phase Microextraction (SPME) with mass spectrometry, based on thermal desorption of analytes extracted on the fibers, followed by ionization by a dielectric barrier discharge ionization (DBDI) source. Limits of detection as low as 0.3 pg/mL and a linear dynamic range of ≥3 orders of magnitude were achieved, with a very simple and reproducible approach. Different from direct analysis in real time (DART), desorption electrospray ionization (DESI), or low-temperature plasma (LTP), the desorption of the analytes from the SPME devices in our setup is completely separated from the ionization event. This enhances the reproducibility of the method and minimizes ion suppression phenomena. The analytes were quantitatively transferred from the SPME to the DBDI source, and the use of an active capillary ionization embodiment of the DBDI source greatly enhanced the ion transmission to the MS. This, together with the extraordinary sensitivity of DBDI, allowed subpg/mL sensitivities to be reached and to skip conventional and time-consuming chromatographic separation.

Low-pressure barrier discharge ion source using air as a carrier gas and its application to the analysis of drugs and explosives.

In this work, a low-pressure air dielectric-barrier discharge (DBD) ion source using a capillary with the inner diameter of 0.115 and 12 mm long applicable to miniaturized mass spectrometers was developed. The analytes, trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), 1,3,5,7-tetranitroperhydro-1,3,5,7-tetrazocine (HMX), pentaerythritol tetranitrate (PETN), nitroglycerine (NG), hexamethylene triperoxide diamine (HMTD), caffeine, cocaine and morphine, introduced through the capillary, were ionized by a low-pressure air DBD. The ion source pressures were changed by using various sizes of the ion sampling orifice. The signal intensities of those analytes showed marked pressure dependence. TNT was detected with higher sensitivity at lower pressure but vice versa for other analytes. For all analytes, a marked signal enhancement was observed when a grounded cylindrical mesh electrode was installed in the DBD ion source. Among nine analytes, RDX, HMX, NG and PETN could be detected as cluster ions [analyte + NO3 ](-) even at low pressure and high temperature up to 180 °C. The detection indicates that these cluster ions are stable enough to survive under present experimental conditions. The unexpectedly high stabilities of these cluster ions were verified by density functional theory calculation.

A dielectric barrier discharge ionization based interface for online coupling surface plasmon resonance with mass spectrometry.

The online combination of surface plasmon resonance (SPR) with mass spectrometry (MS) could be beneficial for accurately acquiring molecular interaction data simultaneously with their structural information at high throughputs. In this work, a novel SPR-MS interface was developed using a dielectric barrier discharge ionization (DBDI) source. The DBDI source was placed in front of the MS inlet, generating an ionization plasma jet. A spray tip was set between the DBDI source outlet and the MS inlet, nebulizing the SPR sample solution. Using this interface, samples could first be studied by SPR, then sprayed and ionized, finally analyzed by MS. By analyzing model samples containing small-molecule drugs dissolved in salt containing solutions, the practicability of this SPR-DBDI-MS interface was proved, observing the consistent change of SPR and MS signals. Compared with our previously developed direct analysis in real time (DART) based SPR-MS interface, this new interface exhibited a higher and better tolerance to non-volatile salts, and different ionization capabilities for various samples. These results indicated that the interface could find further utilization in SPR-MS studies especially when physiological conditions were needed.

Dielectric Barrier Discharge Ionization of Perfluorinated Compounds.

The soft ionization ability based on plasma-jet protonation of molecules initiated by a dielectric barrier discharge ionization source (DBDI) is certainly an interesting application for analytical chemistry. Since the change of an applied sinusoidal voltage may lead to different discharge modes the applied discharge was powered by a square wave generator in order to get a homogeneous plasma. It is known that besides the protonation [M+H](+) of unpolar as well as some polar molecules the homogeneous DBDI can be used to ionize molecules directly [M](+). Here we prove that the DBDI can be applied to exchange fluorine by oxygen of perfluorinated compounds (PFC). PFC are organofluorine compounds with carbon-fluorine and carbon-carbon bonds only but no carbon-hydrogen bonds. While the position of the introduction into the plasma-jet is essential, PFC can be measured in the negative mass spectrometer (MS) mode.

Electrochemical generation of selegiline metabolites coupled to mass spectrometry

The metabolic pathways of selegiline (a drug used for the treatment of early-stage Parkinson's disease) were analyzed by electrochemical oxidation with application of the flow electrochemical cell consisting of three electrodes (ROXY™, Antec, the Netherlands). Two types of working electrodes were applied: glassy carbon (GC) and boron-doped diamond (BDD). The potential applied at working electrode and composition of the solvent were optimized for the best conditions for oxidation and identification processes. All products were directly analyzed on-line by mass spectrometry. For further characterization of electrochemical oxidation products, the novel approach involving reversed phase chromatography linked to mass spectrometry with dielectric barrier discharge ionization (DBDI-MS) was used. In this manuscript, we report a novel technique for simulation of drug metabolism by electrochemical system (EC) connected to liquid chromatography (LC) and dielectric barrier discharge ionization (DBDI) mass spectrometry (MS) for direct on-line detection of electrochemical oxidation products. Here, we linked LC/DBDI-MS system with an electrochemical flow cell in order to study metabolic pathways via identification of drug metabolites generated electrochemically. The DBDI source has never been used before for identification of psychoactive metabolites generated in an electrochemical flow cell. Our knowledge on the biological background of xenobiotics metabolism and its influence on human body is constantly increasing, but still many mechanisms are not explained. Nowadays, metabolism of pharmaceuticals is mainly studied using liver cells prepared from animals or humans. Cytochrome P450, present in microsomes, is primarily responsible for oxidative metabolism of xenobiotics. It was also shown, that breakdown of popular medicines may be successfully simulated by electrochemistry under appropriate conditions. The presented experiments allow for comparison of these two entirely distinct techniques using selegiline as the model xenobiotic with well-described metabolic pathway in human body. The obtained results for selegiline oxidation show that it is possible to generate the most important selegiline metabolites present in human body – some of them with psychoactive properties, such as methamphetamine and amphetamine. These metabolites, serving as an evidence of the xenobiotic intake, can also be produced, among a larger group of metabolites, by incubation of selegiline with rat and human liver microsomes. The EC/LC/DBDI-MS system provides novel, promising platform for drugs screening of the phase I metabolism. The metabolites can be detected directly by MS or collected and separated by liquid chromatography.

Molecular scavengers as carriers of analytes for mass spectrometry identification.

Storage and preconcentration of various molecules by molecular scavengers for thermal desorption and identification by mass spectrometry is presented. A dielectric barrier discharge ionization source combined with a heating element for the chemical characterization of amines and organic acids, initially trapped by molecular scavengers, is described. The developed technique can be applied for preconcentration of minute amounts of molecules in liquid and gaseous phases, as well as their transportation and thorough analysis. The method, operating at ambient pressure, can also be complementary to electron impact ionization, with no need for sample derivatization.

Direct analysis of anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption-dielectric barrier discharge ionization mass spectrometry

Rapid detection of trace level anabolic steroids in urine is highly desirable to monitor the consumption of performance enhancing anabolic steroids by athletes. The present article describes a novel strategy for identifying the trace anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption (LPTD) coupled to dielectric barrier discharge (DBD) ionization mass spectrometry. Using this method the steroid molecules are enriched within a liquid droplet during the thermal desorption process and desorbed all-together at the last moment of droplet evaporation in a short time domain. The desorbed molecules were ionized using a dielectric barrier discharge ion-source in front of the mass spectrometer inlet at open atmosphere. This process facilitates the sensitivity enhancement with several orders of magnitude compared to the thermal desorption at a lower temperature. The limits of detection (LODs) of various steroid molecules were found to be in the range of 0.05–0.1ngmL−1 for standard solutions and around two orders of magnitude higher for synthetic urine samples. The detection limits of urinary anabolic steroids could be lowered by using a simple and rapid dichloromethane extraction technique. The analytical figures of merit of this technique were evaluated at open atmosphere using suitable internal standards. The technique is simple and rapid for high sensitivity and high throughput screening of anabolic steroids in urine.

Flash Desorption/Mass Spectrometry for the Analysis of Less- and Nonvolatile Samples Using a Linearly Driven Heated Metal Filament

In this paper, the important issue of the desorption of less- and nonvolatile compounds with minimal sample decomposition in ambient mass spectrometry is approached using ambient flash desorption mass spectrometry. The preheated stainless steel filament was driven down and up along the vertical axis in 0.3s. At the lowest position, it touched the surface of the sample with an invasion depth of 0.1mm in 50ms (flash heating) and was removed from the surface (fast cooling). The heating rate corresponds to ~10(4)°C/s at the filament temperature of 500°C. The desorbed gaseous molecules were ionized by using a dielectric barrier discharge ion source, and the produced ions were detected by a time-of-flight (TOF) mass spectrometer. Less-volatile samples, such as pharmaceutical tablets, narcotics, explosives, and C60 gave molecular and protonated molecule ions as major ions with thermal decomposition minimally suppressed. For synthetic polymers (PMMA, PLA, and PS), the mass spectra reflected their backbone structures because of the suppression of the sequential thermal decompositions of the primary products. The present technique appears to be suitable for high-throughput qualitative analyses of many types of solid samples in the range from a few ng to 10μg with minimal sample consumption. Some contribution from tribodesorption in addition to thermal desorption was suggested for the desorption processes. Figure ᅟ

Development of a Portable Mass Spectrometer Characterized by Discontinuous Sample Gas Introduction, a Low-Pressure Dielectric Barrier Discharge Ionization Source, and a Vacuumed Headspace Technique

The present study has attempted to downscale a mass spectrometer in order to make it portable and enable onsite analysis with it. The development of a small mass spectrometer required the use of a compact pump whose displacement was small, decreasing the sensitivity of that spectrometer. To get high sensitivity with a small mass spectrometer, we have integrated novel techniques: a highly sensitive ionization source and efficient extraction of sample vapor. The low-pressure dielectric barrier discharge ionization (LP-DBDI) source made it possible to increase the conductance between the source and the mass analyzer, compared with ambient ionization sources, enhancing the efficiency of the ion transfer from the ionization source to the mass analyzer. We have also developed a vacuumed headspace method efficiently transporting the sample vapor to the ionization source. The sensitivity was further enhanced by also using a discontinuous sample gas introduction technique. A prototype portable mass spectrometer using those novel techniques was found to be sensitive enough to detect 0.1 ppm methamphetamine, 1 ppm amphetamine, 1 ppm 3,4-methylenedioxymethamphetamine, and 10 ppm cocaine in liquid.

Leidenfrost Phenomenon-assisted Thermal Desorption (LPTD) and Its Application to Open Ion Sources at Atmospheric Pressure Mass Spectrometry

This work describes the development and application of a new thermal desorption technique that makes use of the Leidenfrost phenomenon in open ion sources at atmospheric pressure for direct mass spectrometric detection of ultratrace levels of illicit, therapeutic, and stimulant drugs, toxicants, and peptides (molecular weight above 1kDa) in their unaltered state from complex real world samples without or with minor sample pretreatment. A low temperature dielectric barrier discharge ion source was used throughout the experiments and the analytical figures of merit of this technique were investigated. Further, this desorption technique coupled with other ionization sources such as electrospray ionization (ESI) and dc corona discharge atmospheric pressure chemical ionization (APCI) in open atmosphere was also investigated. The use of the high-resolution 'Exactive Orbitrap' mass spectrometer provided unambiguous identification of trace levels of the targeted compounds from complex mixtures and background noise; the limits of detection for various small organic molecules and peptides treated with this technique were at the level of parts per trillion and 10(-9) M, respectively. The high sensitivity of the present technique is attributed to the spontaneous enrichment of analyte molecules during the slow evaporation of the solvent, as well as to the sequential desorption of molecules from complex mixtures based on their volatilities. This newly developed desorption technique is simple and fast, while molecular ions are observed as the major ions.