Breast Height Research Articles

Variation in survival, growth and stem straightness in Eucalyptus urophylla provenances in the Southern Highlands region, Tanzania

Lack of quality planting materials has significantly limited productivity and quality of commercial forestry plantations in Tanzania. A provenance/progeny trial of Eucalyptus urophylla was established to test performance in order to select the best planting materials for future plantation activities. A complete randomised block design was used whereby 30 families from 8 provenances within 6 replications were tested. At 13 years tree survival, growth (diameter at breast height and height) and stem straightness were assessed. The results indicate that there were highly significant differences (p < 0.05) among provenances and families in survival, height, breast height diameter (DBH) and stem straightness. The overall survival ranged from 79.0% to 96.2%; height ranged between 24.9 and 32.5 m; and DBH ranged from 18.7 to 24.5 cm. Overall, results from this study show that provenances Alassannaru, Elun kirpas, Nesunhuhun and Nakana ulam have better growth performance and stem form than others. These results provide valuable information on the growth performance of different provenances and families of E. urophylla. The provenances and families selected with best performance can be used in developing improved seeds for plantation establishment and/or selection of plus trees for vegetative propagation as candidate clones for a clonal testing programme in Tanzania.

Benchmarking Under- and Above-Canopy Laser Scanning Solutions for Deriving Stem Curve and Volume in Easy and Difficult Boreal Forest Conditions

The use of mobile laser scanning for mapping forests has scarcely been studied in difficult forest conditions. In this paper, we compare the accuracy of retrieving tree attributes, particularly diameter at breast height (DBH), stem curve, stem volume, and tree height, using six different laser scanning systems in a managed natural boreal forest. These compared systems operated both under the forest canopy on handheld and unmanned aerial vehicle (UAV) platforms and above the canopy from a helicopter. The complexity of the studied forest sites ranged from easy to difficult, and thus, this is the first study to compare the performance of several laser scanning systems for the direct measurement of stem curve in difficult forest conditions. To automatically detect tree stems and to calculate their attributes, we utilized our previously developed algorithm integrated with a novel bias compensation method to reduce the overestimation of stem diameter arising from finite laser beam divergence. The bias compensation method reduced the absolute value of the diameter bias by 55–99%. The most accurate laser scanning systems were equipped with a Velodyne VLP-16 sensor, which has a relatively low beam divergence, on a handheld or UAV platform. In easy plots, these systems found a root-mean-square error (RMSE) of below 10% for DBH and stem curve estimates and approximately 10% for stem volume. With the handheld system in difficult plots, the DBH and stem curve estimates had an RMSE under 10%, and the stem volume RMSE was below 20%. Even though bias compensation reduced the difference in bias and RMSE between laser scanners with high and low beam divergence, the RMSE remained higher for systems with a high beam divergence. The airborne laser scanner operating above the forest canopy provided tree attribute estimates close to the accuracy of the under-canopy laser scanners, but with a significantly lower completeness rate for stem detection, especially in difficult forest conditions.

Production patterns of loblolly pine plantations along a geographic gradient in southern Brazil

Pinus taeda plantations depend directly on the supply of resources (light, water, and nutrients) available to the stand. However, studies quantifying edaphic and climatic factors in P. taeda stands are scarce. This study aimed to identify the main edaphic, climatic and stand factors that influence the productivity and growth pattern of P. taeda plantations in southern Brazil. A total of 24 stands, ranging between 8 and 10 years old were evaluated. Biometric variables such as height, diameter at breast height (DBH), stem analysis, growth rings, specific gravity, and soil chemical and physical variables were evaluated. Site index (SI), stem biomass, mean annual increment without bark (MAI) and correlations between variables were calculated. We observed that by nine years after planting, none of the plots had reached their maximum growth; and MAI, standing stem biomass and SI ranged from 15 to 35 m³ ha−1 year−1, 56–131 Mg ha−1, and 12–19 m, respectively, with higher values in Três Barras site. Stem biomass were positively related with SI (r = 0.89), and stem production was related with higher available water content (r = 0.41), warm temperatures (r = 0.61), and higher relative air humidity (r = 0.58). The study corroborates the role of nutrients, well-drained soils, mild climatic conditions, and low water deficit to explain the high yields of P. taeda in Brazil compared to other locations around the world. Based on these results, studies on fertilization, genetic material, and more frequent use of stem analysis, associated with X-ray densitometry, are recommended for P. taeda.

Relationships between diameter growth and functional wood anatomy in Eucalyptus globulus clones

Aim of study: We aimed to 1) analyze the variability of wood hydraulic anatomical traits in 10 clones of E. globulus Labill. with different growth rates, and 2) determine whether the magnitude of diameter growth affects the relationships between anatomical variables and diameter at breast height (DBH). Area of study: 25-year-old common garden trial in Balcarce, Buenos Aires, Argentina. Material and methods: We measured vessel diameter and number per unit area in transverse histological sections of stem wood, and calculated the proportion of vessel lumens, vessel composition (S), and theoretical specific hydraulic conductivity (Ks) of 10 E. globulus clones of high (HG) and low (LG) mean growth rates (measured as DBH) under field conditions. Main results: There was a difference in the range of variability in hydraulic anatomy between HG and LG clones, with LG clones showing a wider range. HG clones had wood with larger and fewer vessels and higher S compared to LG clones, with similar Ks between both growth groups. No clear or strong trends were observed between wood anatomy and DBH within the HG and LG groups, but across all clones a high correlation (Spearman coefficient r; p&lt;0.001) was observed between vessel number ‒ DBH (r= -0.68), and S ‒ DBH (r= 0.74). These correlations were driven by contrasting mean values of both growth groups. Research highlights: Commercial E. globulus clones present a relatively large variation in anatomical and hydraulic strategies. However, in contrast to what is postulated for various woody species, there was no clear relationship between theoretical hydraulic efficiency and individual diameter growth rate in the genotypes studied.

Morphological and genetic characterization of jackfruit (Artocarpus heterophyllus) in the Kayunga and Luwero districts of Uganda

BackgroundJackfruit (Artocarpus heterophyllus) is an economically valuable fruit tree in Uganda. However, the production of jackfruit in Uganda is low. Additionally, because of deforestation, genetic erosion of the resource is predicted before its exploitation for crop improvement and conservation. As a prerequisite for crop improvement and conservation, 100 A. heterophyllus tree isolates from the Kayunga and Luwero districts in Uganda were characterized using 16 morphological and 10 microsatellite markers.ResultsThe results from the morphological analysis revealed variations in tree height, diameter at breast height (DBH), and crown diameter, with coefficient of variation (CV) values of 20%, 41%, and 33%, respectively. Apart from the pulp taste, variation was also observed in qualitative traits, including tree vigor, trunk surface, branching density, tree growth habit, crown shape, leaf blade shape, fruit shape, fruit surface, flake shape, flake color, flake flavor and pulp consistency/texture. Genotyping revealed that the number of alleles amplified per microsatellite locus ranged from 2 to 5, with an average of 2.90 and a total of 29. The mean observed (Ho) and expected (He) heterozygosity were 0.71 and 0.57, respectively. Analysis of molecular variance (AMOVA) indicated that 81% of the variation occurred within individual trees, 19% among trees within populations and 0% between the two populations. The gene flow (Nm) in the two populations was 88.72. The results from the ‘partitioning around medoids’ (PAM), principal coordinate analysis (PCoA) and genetic cluster analysis further revealed no differentiation of the jackfruit populations. The Mantel test revealed a negligible correlation between the morphological and genetic distances.ConclusionsBoth morphological and genetic analyses revealed variation in jackfruit within a single interbreeding population. This diversity can be exploited to establish breeding and conservation strategies to increase the production of jackfruit and hence boost farmers’ incomes. However, selecting germplasm based on morphology alone may be misleading.

Characterizing heterogeneous forest structure in ponderosa pine forests via UAS-derived structure from motion

Increasingly, dry conifer forest restoration has focused on reestablishing horizontal and vertical complexity and ecological functions associated with frequent, low-intensity fires that characterize these systems. However, most forest inventory approaches lack the resolution, extent, or spatial explicitness for describing tree-level spatial aggregation and openings that were characteristic of historical forests. Uncrewed aerial system (UAS) structure from motion (SfM) remote sensing has potential for creating spatially explicit forest inventory data. This study evaluates the accuracy of SfM-estimated tree, clump, and stand structural attributes across 11 ponderosa pine-dominated stands treated with four different silvicultural prescriptions. Specifically, UAS-estimated tree height and diameter-at-breast-height (DBH) and stand-level canopy cover, density, and metrics of individual trees, tree clumps, and canopy openings were compared to forest survey data. Overall, tree detection success was high in all stands (F-scores of 0.64 to 0.89), with average F-scores > 0.81 for all size classes except understory trees (< 5.0 m tall). We observed average height and DBH errors of 0.34 m and − 0.04 cm, respectively. The UAS stand density was overestimated by 53 trees ha−1 (27.9%) on average, with most errors associated with understory trees. Focusing on trees > 5.0 m tall, reduced error to an underestimation of 10 trees ha−1 (5.7%). Mean absolute errors of bole basal area, bole quadratic mean diameter, and canopy cover were 11.4%, 16.6%, and 13.8%, respectively. While no differences were found between stem-mapped and UAS-derived metrics of individual trees, clumps of trees, canopy openings, and inter-clump tree characteristics, the UAS method overestimated crown area in two of the five comparisons. Results indicate that in ponderosa pine forests, UAS can reliably describe large- and small-grained forest structures to effectively inform spatially explicit management objectives.

Redbay (Persea borbonia L. Spreng) Seedling and Sapling Growth and Recruitment Near Trees with and without Putative Resistance to Laurel Wilt Disease

Laurel wilt, a fungal disease (Harringtonia lauricola T.C. Harr., Fraedrich and Aghayeva) spread by the Asian redbay ambrosia beetle [Xyleborus glabratus Eichhoff (Coleoptera: Curculionidae: Scolytinae)], presents an imminent threat to North American members of the Lauraceae family, having caused extensive mortality in several species, especially redbay (Persea borbonia L. Spreng). Varying levels of disease resistance have been recorded in redbay under controlled conditions. To investigate if previously monitored putatively resistant field redbays have influenced the regeneration and survival of conspecifics within the surrounding 0.08 ha, a survey was conducted in 2018-19 and compared to similar data collected years prior (2008-09, 2013) along the coasts of Florida, Georgia, and South Carolina, United States. Plots were originally established at six disease-infested study sites around large redbay (&gt;7.5-cm diameter at breast height (1.37 m) (DBH)) that had survived the initial laurel wilt disease epidemic that began in approximately 2007. In 2018-19, a subset of 61 plots within 16 m of the original “survivor” redbay were recorded and compared to previous surveys. Among the original redbay selected for resistance, 22 of 61 (36%) survivors across all sites were alive in 2018 with survival rates varying from 0 to 70% between survey periods (average mortality 3.6%/year). Trees that died in years since 2008-09 had their plots reclassified as susceptible or “suscepts”. Changes in mean quadratic diameter at 1.37 m of redbay plots near survivors were significantly greater than those near suscepts, and in 2018-19, the average diameter of redbay near survivors was 7.62 cm vs. 4.90 cm for suscepts. The diameter distribution of dead and live redbay in the whole population showed a decrease in live individuals surviving past 8 cm DBH in 2018–2019, but 20 of 22 survivor candidate trees were larger than 8 cm DBH. Regeneration was occurring both clonally and sexually and tended to be greater near suscepts, but midstory resprouts per hectare and understory seedlings interacted significantly with the site and the latter differed between sites. These findings indicate that redbay is regenerating in these ecosystems, and disease resistance may allow for increased average tree size for some individuals, but an upper size threshold of around 8 cm DBH may still exist for much of the population. In addition, the importance of site variables in regeneration was apparent, making either local genetic or environmental effects an important topic for future research. Continuing to monitor these survivors while locating new candidates for disease screenings and breeding, preventing the introductions of new strains of H. lauricola, shedding light on the nature of resistance and its heritability, and initiating outplanting trials with resistant germplasm are instrumental steps in bringing redbay back to prominence in its historical range.

Measuring Tree Diameter Using LiDAR Equipped iPad: An Evaluation of ForestScanner and Arboreal Forest Applications

Abstract Forest owners need simple and efficient tools to capture and understand forest metrics. Additionally, they could benefit from emerging technologies in forest analysis. Light detection and ranging (LiDAR) sensors allow for precise measurements of different variables and can be used more easily in forestry settings thanks to their introduction into smartphones and tablets. ForestScanner and Arboreal Forest are two applications (apps) that allow for the measurement of tree diameter at breast height (DBH) on LiDAR-equipped devices. Our study sought to analyze and compare (1) the timing of traditional and LiDAR-based forest inventory methods and (2) the accuracy of traditional and LiDAR-based forest measurements. We established a series of plots to record and compare tree DBH and measurement time between a traditional diameter tape, ForestScanner, and Arboreal Forest. We found that DBH measurements from the apps were in good agreement with diameter tape measurements; however, both apps tended to underestimate DBH. Additionally, measurement time for both apps was found to be significantly shorter than traditional tape measurements. Further improvements in LiDAR apps can present a simple and efficient way for future forest analysis by seasoned foresters and private landowners. Study Implications: LiDAR smartphone applications represent a cost-effective and time-efficient method for wide-spread forest management, especially among landowners who have little access to forestry-specific equipment. As these technologies continue to advance, the incorporation of functions for plot establishment, height measurements, biomass estimations, and ecosystem dynamics could become valuable assets in the forest industry. We encourage individuals to further test LiDAR measurement applications themselves, as further training on these applications will help developers to improve application accuracy.

Spatial pattern analysis reveals intra-specific competition and fractal characteristics of Pinus sylvestris var. mongolica populations in Xiaotaojia Gulley Watershed

The imprudent cultivation of Pinus sylvestris var. mongolica has led to degradation in the watersheds surrounding Chongli County. This study investigates the artificial forests of P. sylvestris var. mongolica in the Xiaotaojiagou watershed, Chongli County. Twenty-five subplots measuring 20 m × 20 m were established at upper, upper-middle, middle, and lower positions within the watershed. Spatial distribution patterns and fractal characteristics of P. sylvestris var. mongolica were analyzed using univariate pair correlation function g(r), marked correlation functions (marked correlation function Kmm(r), marked variation function γm(r), and Schlather’s Im(r) function), and fractal dimensions (box-counting dimension, information dimension). The findings are as follows: (1) P. sylvestris var. mongolica in the middle section of the watershed displayed the largest average diameters at breast height and tree height, while those in the lower section exhibited the largest average crown width. (2) P. sylvestris var. mongolica populations in the upstream, middle, and downstream sections of the watershed exhibited three alternating states: aggregated distribution, uniform distribution, and random distribution. However, with increasing spatial scale, the distribution gradually tended towards randomness. P. sylvestris var. mongolica in the upper-middle section of the watershed showed aggregated distribution at scales of 1.5–32.5 m, transitioning to random distribution and then to uniform distribution with increasing spatial scale. (3) Individual attributes of P. sylvestris var. mongolica (diameter at breast height, tree height, and crown width) exhibited high correlation and facilitation in the upstream and upper-middle sections at small-to-medium scales, whereas negative correlations and inhibitions were observed in the middle and lower sections. These attributes tended to be uncorrelated with increasing spatial scale. (4) Fractal dimensions indicated that the degree of aggregation of P. sylvestris var. mongolica population was lowest in the downstream section of the watershed. In conclusion, spatial distribution patterns and intraspecies relationships of P. sylvestris var. mongolica populations are influenced by spatial scale and environmental conditions, particularly in more resource-competitive downstream areas. Effective management and protection of P. sylvestris var. mongolica populations require targeted measures such as adjusting afforestation density, improving soil conditions, and implementing differentiated ecological restoration strategies to alleviate intraspecies competitive pressures and promote population health and sustainable development.

Effect of artisanal gold mining on woody plant diversity in Western Burkina Faso

Although artisanal gold mining strongly contribute to enhance people incomes in West Africa, this activity can lead to habitat fragmentation and loss of woody species. Therefore, studying the impact of artisanal gold mining on woody plant diversity is needed for efficient management of forest resources. In this study, we investigated the impact of artisanal gold mining on woody plant diversity and dynamics in the Kari classified forest in Western Burkina Faso. Forest inventories were carried out at two sites including a gold panning site and a control site, following a systematic sampling design. We identified all woody species and measured all woody species with a diamtere at breast height ≥5 cm. A total 60 plots of 900 m² were surveyed. Diversity indices and dendrometric parameters were calculated and compared between the two sites. The results showed a higher species richness (59 woody species distributing in 39 genera and 18 families) in the control site compared to the gold panning site (38 species distributing in 25 genera and 12 families). The mean values of the number of species per plot and the Shannon diversity index were higher in the control site (15.50 ± 8.80; 2.16 ± 0.43, respectively) than in the artisal mining site (5.47 ± 2.71; 1.40 ± 0.53, respectively), showing that the control site is more diverse than the site that is under gold panning. The control site also had the highest density (683.33 ± 262.99 ft/ha) and stable woody stands compared to the less gold panning site (137.41 ± 102.31 ft/ha) where unstable woody stands were found. While the gold-panning site was characterised by biophysical impacts such as destruction of the plant cover and soil excavation, no visible impact was observed at the control site.Theses findings highlight the negative impact of artisanl gold mining on woody species diversity and structure. The study provides essential information for decision-making on sustainable forest management in the context of mining boom in Burkina Faso's.

Extracting the DBH of Moso Bamboo Forests Using LiDAR: Parameter Optimization and Accuracy Evaluation

The accurate determination of the Diameter at Breast Height (DBH) of Moso bamboo is crucial for estimating biomass and carbon storage in Moso bamboo forests. In this research, we utilized handheld LiDAR point cloud data to extract the DBH of Moso bamboo and enhanced the accuracy of diameter fitting by optimizing denoising parameters. Specifically, we fine-tuned two denoising parameters, neighborhood point number and standard deviation multiplier, across five gradient levels for denoising. Subsequently, DBH fitting was conducted on data processed with varying denoising parameters, followed by a precision evaluation to investigate the key factors influencing the accuracy of Moso bamboo DBH fitting. The research results indicate that a handheld laser was used to scan six plots, from which 132 single Moso bamboo trees were selected. Out of these, 122 single trees were successfully segmented and identified, achieving an accuracy rate of 92.4% in identifying single Moso bamboo trees, with an average accuracy of 95.64% in extracting DBH for individual plants; the mean error was ±1.8 cm. Notably, setting the minimum neighborhood point to 10 resulted in the highest fitting accuracy for DBH. Moreover, the optimal standard deviation multiplier threshold was found to be 1 in high-density forest plots and 2 in low-density forest plots. Forest condition and slope were identified as the primary factors impacting the accuracy of Moso bamboo DBH fitting.

Assessment of air quality benefits of vegetation in an urban‐industrial region of India by integrating air monitoring with i‐Tree Eco model

AbstractIn the last few years, urban trees have emerged as an effective nature‐based solution to mitigate increasing air pollutant levels due to urbanization and industrialization. This study aims to assess the synergistic effect of urban trees on improving air quality by combining real‐time PM2.5 monitoring with the i‐Tree Eco model. The monitoring was conducted during rush hours with high traffic volume and during non‐rush hours, in both the tree alley and a non‐tree road section within the industrial areas of the north‐west region of the National Capital Territory of Delhi, India. The i‐Tree Eco model was run using the diameter at breast height values of tree species present in the study area, and the PM2.5 reduction ability of the trees was quantified. The results from both approaches indicated that urban trees can significantly reduce the traffic‐fed PM2.5 concentrations. Therefore, it is suggested that tree plantations be integrated into air pollution management strategies in urbanized regions with high traffic volumes. Although this study explores the initial link between trees and air quality in Delhi, further research incorporating local wind speed and direction measurements would provide a more comprehensive understanding of how trees influence air quality in any highly polluted urban setting.

Estimating aboveground biomass of tropical urban forests with UAV-borne hyperspectral and LiDAR data

Urban trees and forests can contribute to climate change mitigation by sequestering carbon in their living tissues, with aboveground biomass (AGB) playing a pivotal role. This study explores the capability of UAV-borne hyperspectral and LiDAR data for estimating AGB in tropical urban forests. Structural attributes of trees, such as diameter at breast height (DBH), total height, and wood density, were collected from over 5600 individuals, forming a comprehensive AGB dataset. Our methodology included two primary AGB estimation strategies: an area-based strategy that correlated AGB with hyperspectral and canopy height data across various grid sizes and an individual tree crown (ITC)-based method that integrated canopy height, spectral signatures of individual trees and crown area. The findings indicate that increasing the grid size from 10 m to 50 m improved the R2 from 0.24 ± 0.04 to 0.61 ± 0.13, mainly due to reduced border effects. Furthermore, integrating canopy height and hyperspectral data enhanced the R2 of AGB estimates from 0.61 ± 0.13 to 0.70 ± 0.09 for a 50 × 50 m grid. Crucially, wavelengths centered at the green peak and red-edge were identified as key bands in AGB retrieval. Integrating hyperspectral and LiDAR data did not significantly enhance results for individual trees, where AGB was closely linked to tree height and crown area. This study underscores the potential of utilizing integrated UAV-borne sensors for biomass assessment in urban forest settings.

Aboveground biomass stocks of species-rich natural forests in southern China are influenced by stand structural attributes, species richness and precipitation

Forests, the largest terrestrial carbon sinks, play an important role in carbon sequestration and climate change mitigation. Although forest attributes and environmental factors have been shown to impact aboveground biomass, their influence on biomass stocks in species-rich forests in southern China, a biodiversity hotspot, has rarely been investigated. In this study, we characterized the effects of environmental factors, forest structure, and species diversity on aboveground biomass stocks of 30 plots (1 ha each) in natural forests located within seven nature reserves distributed across subtropical and marginal tropical zones in Guangxi, China. Our results indicate that forest aboveground biomass stocks in this region are lower than those in mature tropical and subtropical forests in other regions. Furthermore, we found that aboveground biomass was positively correlated with stand age, mean annual precipitation, elevation, structural attributes and species richness, although not with species evenness. When we compared stands with the same basal area, we found that aboveground biomass stock was higher in communities with a higher coefficient of variation of diameter at breast height. These findings highlight the importance of maintaining forest structural diversity and species richness to promote aboveground biomass accumulation and reveal the potential impacts of precipitation changes resulting from climate warming on the ecosystem services of subtropical and northern tropical forests in China. Notably, many natural forests in southern China are not fully stocked. Therefore, their continued growth will increase their carbon storage over time.

Woody Plant Diversity of Wof Ayzurish Forests, the Dry Afromontane of the North Shewa of Ethiopia: Regeneration and community type with Environmental gradient

Dry Afromontane Forest (DAF) is the largest Afromontane section and plays a fundamental role in preservation of species biodiversity. Despite its biodiversity, DAF is the most altered and threatened in the Ethiopian ecosystem. With the exception of a few isolated pockets left in some sacred places and protected areas of the country, most of forests are inaccessible. The scenario is not different for the present study forest. Therefore, the objective of the present study is to investigate woody species diversity, structure and regeneration status of Wof Ayzurish Forest, which is a dry Afromonatane in North Shewa of Ethiopia. A systematic method was employed whereby 67 quadrats set in 8 parallel lines transecting at 300-meter intervals and quadrats at 150-m distance. All trees and shrubs with diameters of breast height > 2.5 cm and height > 2 m were measured. The results revealed that Wof Ayzurish Forest harbors 76 species of woody plants that belong to 68 genera and 47 families, with Asteraceae, Fabaceae, and Solanaceae displaying the highest diversity. Shrubs had the highest composition than trees. The most abundant plants were Dodonaea viscosa subsp. angustifolia, Carissa spinarum, Juniperus procera, Olinia rochetiana and Olea europaea subsp. cuspidata. Dodonaea viscosa subsp. angustifolia was the most prominent plant, occurring in 98.5 % of all sample plots. The DBH and height classification pattern exhibited that the forest had a classic inverted J-shape, dominated by smaller trees and shrubs, indicating a secondary stage of regeneration. Total basal area (BA) for trees and shrubs DBH > 2.5 cm was 18.03 m2 ha−1. Remarkably, five species accounted for 57.45 % of the basal area, indicating that higher numbers of individuals concentrated in lower DBH classes. By using R software, agglomerative hierarchical cluster analysis and Canonical Correspondence Analysis (CCA) has done to identify plant community types and examine the relationship between plant community types and environmental variables, respectively. Three significantly different (p < 0.05) plant community types were identified. The CCA results showed that species diversity and community composition among community types were significantly influenced by altitude and human disturbance such as expansion of agriculture, cuttings, and grazing. Therefore, it is recommended that community-based methods and awareness creation should be devised in order to implement sustainable forest conservation.

Time Composition, Efficiency, Workload, and Noise Exposure during Tree Felling and Processing with Petrol and Battery-Powered Chainsaws in Mixed High Forest Stands

This study presents the effects of using a battery-powered chainsaw on work efficiency and ergonomics under real conditions during timber harvesting. The study was conducted during the felling and processing of coniferous and deciduous trees with a diameter at breast height (DBH) of 13 cm to 78 cm using both a petrol-powered and battery-powered chainsaw. The results include comparisons of time composition, work efficiency, psychophysical workload, and noise exposure. Heart rate and noise exposure were measured over ten days as part of a time study using the Husqvarna 543 XP petrol-powered chainsaw and the Husqvarna 540i HP battery-powered chainsaw. The comparison of the time composition between the chainsaws used showed 3%–4% differences in the duration of productive time operations and 16% in service time. The difference in work efficiency during the productive time between the two chainsaws was statistically insignificant, but generally higher when working with the battery-powered chainsaw than with the petrol-powered chainsaw. During the main productive time, the work efficiency was 9.89 min/t for the petrol-powered chainsaw and 9.44 min/t for the battery-powered chainsaw. The psychophysical workload of the feller was lower when using the battery-powered chainsaw than when using the petrol-powered chainsaw as the relative working heart rates during the entire productive time was 32.5% for the battery-powered chainsaw and 35.0% for the petrol-powered chainsaw. The noise exposure of the workers was lower when using a battery-powered chainsaw, namely 6.0 dB(A) and 0.4 dB(C) compared to the use of a petrol-powered chainsaw. The results of this paper indicate that battery-powered chainsaws can compete with petrol chainsaws in harvesting conditions that are currently considered unsuitable due to the large volume of trees.

Using Acoustic Tomography to Model Wood Deterioration in Cedrelinga cateniformis Ducke in the Peruvian Amazon

Forest plantations can be established in order to restore degraded areas. Acoustic tomography, which is of increasing importance in forest management, was used in the present study to obtain information for managing plantations of Cedrelinga cateniformis Ducke in the Peruvian Amazon. The species is valuable in the timber sector of Peru, but the core wood tends to deteriorate and develop cavities. The main objective of the study was to model wood deterioration in Cedrelinga cateniformis Ducke using the data obtained through acoustic tomography. Eight plantations of varying ages were analyzed using acoustic tomography in order to obtain indicators of wood deterioration. Biometric, climatic, and edaphic data (explanatory variables) were also measured in each plantation. The indicator variables and explanatory variables were compared and evaluated using correlation and principal component analysis. Wood deterioration was modelled using stepwise regression. The indicator variables differed significantly between plantations and were mainly correlated with the biometric variables (age and diameter at breast height). The models explained 81% of the variability of pith rot. The percentage rotten area was minimal in young plantations (1%), and the opposite was observed in mature trees (21.5 to 25.6%). The study findings provide valuable information, enabling foresters to determine the optimal age and diameter for felling Cedrelinga cateniformis in plantations in the Peruvian Amazon.

Simultaneous Models for the Estimation of Main Forest Parameters Based on Airborne LiDAR Data

This study aimed to develop simultaneous models with universal applicability for the estimation of the main factors of forest stands based on airborne LiDAR data and to provide a reference for standardizing the approach and evaluation indices of main forest factor modeling. Using airborne LiDAR and field survey data from 190 sample plots in spruce (Picea spp.), fir (Abies spp.), and spruce–fir mixed forests in Northeast China, the simultaneous models for estimating the main factors of forest stands were developed. To develop the models, the relationships between mean tree height, stand basal area, stand volume, and the main metrics of the LiDAR data and the correlations between eight quantitative factors of forest stands were considered, and the error-in-variable simultaneous equations approach was employed to fit the models. The results showed that the mean prediction errors (MPEs) of eight forest stand factors estimated by the simultaneous models were mostly within 5%, and only the MPE of the number of trees per hectare exceeded 5%. The mean percentage standard errors (MPSEs) of the estimates, including the mean diameter at the breast height (DBH), mean tree height, and mean dominant tree height, were within 15%; the MPSEs of the estimates of the stand basal area, volume, biomass, and carbon stock per hectare were within 25%; and only the MPSE of the estimated number of trees per hectare exceeded 30%. The coefficients of determination (R2) of the core prediction models for the volume, biomass, and carbon storage were all greater than 0.7. It can be concluded that estimating the main factors of forest stands based on the combination of LiDAR and field survey data is technically feasible, and the simultaneous models developed in this study for the estimation of the eight main stand factors of spruce–fir forests can meet the precision requirements of forest resource inventory, except for the number of trees, indicating that the models can be applied in practice.

Feasibility of constructed soils for tree planting – A pilot study in New York City

Constructed soils are soils that are created with a mixture of various materials. An innovative soil exchange program - the Clean Soil Bank (CSB) in New York City allows recycling of clean glacial outwash sediments excavated from depth at construction sites. One previous study showed that soils constructed from CSB sediment and compost can effectively support crop growth in community gardens, but no research has been conducted on its potential usage as a medium for tree growth. Moreover, biochar has been used to improve soil quality, but its efficacy for street trees incorporated into constructed soils has largely not been quantified in the field. The objective of this project was to evaluate the feasibility of using soils constructed from the CSB and compost for tree planting and to investigate the impact of biochar on tree performance. Thirty-six trees of two species (Maackia amurensis and Zelkova serrata) were planted in 2019, on the sidewalks of a residential-business neighborhood in Bronx, New York. Each tree pit contains one of three soil types: type A - existing and purchased topsoil mixed with 33% compost and biochar, type B - CSB sediment mixed with 33% compost, and type C - CSB sediment mixed with 33% compost and biochar. Soil samples were collected in 2019 (before planting) and in 2021. Tree health assessments were conducted in September 2020 and July 2021 using a protocol developed by the USDA Forest Service. Other tree health parameters collected include diameter at breast height (DBH), crown diameter, tree height, photosynthetic capacity, and foliar chemistry. Significant differences in bulk density, water holding capacity, and K, Fe, and Zn concentrations were found among the three soil types. However, comparison of tree performance and foliar chemistry showed no systematic differences among the three soil types. The results indicate that CSB sediment mixed with compost can be an effective replacement for purchased topsoil for tree growth. No evidence was found that biochar provides additional benefits to street tree performance. Considering the abundant availability of glacial outwash sediment at low cost to the city, as well as access to locally produced compost, constructed soils can be a reliable source of material for urban forestry programs.

Old-growth forests in the Dinaric Alps of Bosnia-Herzegovina and Montenegro: a continental hot-spot for research and biodiversity

IntroductionAccording to various censuses, Europe has less than 1.5 million ha of old-growth forests (OGF). Most of them are in the boreal zone, while their presence in the temperate zone is residual and fragmented.In the framework of the EU biodiversity strategy, it has been adopted a broad definition of OGF which includes late-seral forests and forests with some management legacies. However, research purposes need to identify strictly defined OGFs characterized by structure, disturbance history, and processes typical and exclusive of the last stage of the forest dynamic.MethodsThe present paper wants to contribute to this debate by presenting a research network of four mixed (Fagus-Abies-Picea) montane OGFs in the Dinaric Alps (Lom, BiH; Janj, BiH; Perućica, BiH; Biogradska Gora, MNE), summarizing 20 years of multidisciplinary research by focusing on the structural characteristics and the disturbance history of the whole network and their coherency with strict OGF indicators. These sites were selected in relatively structurally uniform study areas, where 142 permanent plots have been established since 2002.Results and discussionThe study sites have a high living (747–1,201 m3 ha−1) and coarse woody debris (CWD) biomass (304–410 m3 ha−1), resulting in the highest forest carbon sink at the continental level (398–484  Mg C ha−1). The presence of large and old trees is one of the critical characteristics of the old-growth stage: in Lom and Perućica, there are 19 trees and 14  ha−1 larger than 1 m at breast height, respectively, and 14 trees and 15 trees ha−1 older than 400  years. In the last three centuries, continuous small-scale disturbances have driven forest dynamics, developing stands characterized by gap-phase dynamics and quasi-equilibrium structure. The Dinaric OGF network presents robust indicators of old-growthness, similar structural characteristics, and dynamic processes across all four sites. Identifying this sub-set of OGF using strict criteria is critical for recognizing conservation priorities and for quantifying, along an old-growthness chronosequence, the current structural differences of managed or recently abandoned forests. Besides, only OGF selected with rigorous criteria can act as a reliable reference for ecological restoration and sustainable forest management as a benchmark for carbon sink and for quantifying the impact of climate change on forests.