Dialkyl Sulfides Research Articles

Conversion of Acids to S-Alkyl Dithiocarbamates by Decarboxylative Sulfuration Using Visible-Light Photocatalysis.

S-Alkyl dithiocarbamates, as an important class of sulfur-containing compounds, play pivotal roles in diverse fields, yet methods for the synthesis that start from simple, readily available feedstocks and exhibit mild conditions and structurally diverse products are scarce. In this work, we developed an efficient approach for the synthesis of various S-alkyl dithiocarbamates via visible-light photocatalysis with readily available and structurally diverse alkyl carboxylic acids (primary, secondary, and tertiary acids, amino acids, etc.) and disulfide tetraalkylthiuram as the starting materials. This protocol features high efficiency, mild reaction conditions, a broad substrate scope, and good functional group tolerance. Potential applications are further demonstrated by a sunlight experiment, H2O as a solvent, gram-scale synthesis, and facile synthesis of bioactive molecules.

Iron-Catalyzed Asymmetric Imidation of Sulfides via Sterically Biased Nitrene Transfer.

Transition-metal-catalyzed enantioselective nitrene transfer to sulfides has emerged as one of the most powerful strategies for rapid construction of enantioenriched sulfimides. However, achieving stereocontrol over highly active earth-abundant transition-metal nitrenoid intermediates remains a formidable challenge compared with precious metals. Herein, we disclose a chiral iron(II)/N,N'-dioxide-catalyzed enantioselective imidation of dialkyl and alkyl aryl sulfides using iminoiodinanes as nitrene precursors. A series of chiral sulfimides were obtained in moderate-to-good yields with high enantioselectivities (56 examples, up to 99% yield, 98:2 e.r.). The utility of this methodology was demonstrated by late-stage modification of complex molecules and synthesis of the chiral insecticide sulfoxaflor and the intermediates of related bioactive compounds. Based on experimental studies and theoretical calculations, a water-bonded high-spin iron nitrenoid species was identified as the key intermediate. The observed stereoselectivity was original from the steric repulsion between the amide unit of the ligand in the chiral cave and the bulky substituent of sulfides. Additionally, dioxazolones proved to be suitable acylnitrene precursors in the presence of an iron(III)/N,N'-dioxide complex, resulting in the formation of enantioselectivity-reversed sulfimides (14 examples, up to 81% yield, 97:3 e.r.).

Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts.

Recent advances in visible light photocatalysis represent a significant stride towards sustainable catalytic chemistry. However, its successful implementation in fine chemical production remains challenging and requires careful optimization of available photocatalysts. Our work aims to structurally modify bioinspired porphyrin catalysts, addressing issues related to their laborious synthesis and low solubility, with the goal of increasing their efficiency and developing reusable catalytic systems. We have demonstrated the catalytic potential of readily available meso-tetrakis[4-(diethoxyphosphoryl)phenyl]porphyrins (M(TPPP)). Novel metal (Pd(II), Co(II) and In(III)) complexes with this ligand were prepared in good yields. These chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence) and electrochemical methods. The introduction of phosphonate groups on the phenyl substituents of meso-tetraphenylporphyrins (M(TPP)) improves solubility in polar organic solvents without significantly altering the photophysical properties and photostability of complexes. This structural modification also leads to easier reductions and harder oxidations of the macrocycle for all investigated complexes compared to the corresponding TPP derivatives. The free base porphyrin, zinc(II), palladium(II), and indium(III) complexes were studied as photocatalysts for oxidation of sulfides to sulfoxides using molecular oxygen as a terminal oxidant. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under blue LED irradiation in the acetonitrile-water mixture (10 : 1 v/v) with a low loading (0.005-0.05 mol%) of porphyrin photocatalysts, where H2(TPPP) and Pd(TPPP) were found to be the most efficient. The reaction mechanism was studied using photoluminescence and EPR spectroscopies. Then, to access reusable catalysts, water-soluble derivatives bearing phosphonic acid groups, H2(TPPP-A) and Pd(TPPP-A), were prepared in high yields. These compounds were characterized using spectroscopic methods. Single-crystal X-ray diffraction analysis of Pd(TPPP-A) reveals that the complex forms a 3D hydrogen-bonded organic framework (HOF) in the solid state. Both H2(TPPP-A) and Pd(TPPP-A) were found to catalyze the photooxidation of sulfides by molecular oxygen in the acetonitrile-water mixture (1 : 1 v/v), while only Pd(TPPP-A) resulted in selective production of sulfoxides. The complex Pd(TPPP-A) was easily recovered through extraction in the aqueous phase and successfully reused in five consecutive cycles of the sulfoxidation reaction.

Amino Acid Sulfinate Salts as Alkyl Radical Precursors

A general approach to the synthesis of amino acid sulfinate salts from commercially available α-chiral hydroxylated amino acids is reported. These reagents are shown to be valuable precursors to alkyl radicals under mild photochemical oxidation conditions. The photochemically generated amino acid radicals engage readily with alkyl and aryl disulfide radical traps to afford a diverse suite of modified amino acids.

Enzyme/GSH/pH-responsive hyaluronic acid grafted porous silica nanocarriers bearing Ag2S QDs for fluorescence imaging and combined therapy

Hyaluronic acid (HA) is a naturally polysaccharide that has been used for drug delivery, but is limited by low drug loading capacity and drug leakage in circulation. To improve drug delivery efficient, HA modified porous silica (pSiO2) nanocarriers were successfully prepared for drug delivery and combining therapy. pSiO2 nanocarriers have stable porous structure and high loading capacity, and pSiO2/HA nanocarriers would possess advantages of HA-based carriers and pSiO2 nanoparticles. Herein, pSiO2 nanocarriers were prepared by two-phase process, followed by embedding Ag2S QDs in the pore walls of pSiO2 carriers, which render the carriers photothermal effect. pSiO2 nanocarriers have size of 30 nm, large channels, and high loading capacity (29.3 %). To graft HA, a sensitive linker with alkyl amine and disulfide bond was conjugated on the surface of Ag2S/pSiO2 nanocarriers by three-step reaction. After loading doxorubicin (DOX), HA was grafted via sensitive linker onto the surface of Ag2S/pSiO2 carriers via the formation of amide bonds to seal the loaded drugs. The interaction between HA and CD44 confers the carrier targeting ability to cancer cells. HA coating can be degraded by hyaluronidase resulting in the release of internal cargo. The Ag2S/pSiO2/HA nanocarriers performs responsive drug release and combining photothermal chemotherapy.

Decatungstate-catalyzed radical disulfuration through direct C-H functionalization for the preparation of unsymmetrical disulfides

Unsymmetrical disulfides are widely found in the areas of food chemistry, pharmaceutical industry, chemical biology and polymer science. Due the importance of such disulfides in various fields, general methods for the nondirected intermolecular disulfuration of C-H bonds are highly desirable. In this work, the conversion of aliphatic C(sp3)-H bonds and aldehydic C(sp2)-H bonds into the corresponding C-SS bonds with tetrasulfides (RSSSSR) as radical disulfuration reagents is reported. The decatungstate anion ([W10O32]4−) as photocatalyst is used for C-radical generation via intermolecular hydrogen atom transfer in combination with cheap sodium persulfate (Na2S2O8) as oxidant. Herein a series of valuable acyl alkyl disulfides, important precursors for the generation of RSS-anions, and unsymmetrical dialkyl disulfides are synthesized using this direct approach. To demonstrate the potential of the method for late-stage functionalization, approved drugs and natural products were successfully C-H functionalized.

Volatilome and Essential Oil of Ulomoides dermestoides: A Broad-Spectrum Medical Insect.

Ulomoides dermestoides are used as a broad-spectrum medical insect in the alternative treatment of various diseases. Preliminary volatilome studies carried out to date have shown, as the main components, methyl-1,4-benzoquinone, ethyl-1,4-benzoquinone, 1-tridecene, 1-pentadecene, and limonene. This work focused on the production of metabolites and their metabolic variations in U. dermestoides under stress conditions to provide additional valuable information to help better understand the broad-spectrum medical uses. To this end, VOCs were characterized by HS-SPME with PEG and CAR/PDMS fibers, and the first reported insect essential oils were obtained. In HS-SMPE, we found 17 terpenes, six quinones, five alkenes, and four aromatic compounds; in the essential oils, 53 terpenes, 54 carboxylic acids and derivatives, three alkynes, 12 alkenes (1-Pentadecene, EOT1: 77.6% and EOT2: 57.9%), 28 alkanes, nine alkyl disulfides, three aromatic compounds, 19 alcohols, three quinones, and 12 aldehydes were identified. Between both study approaches, a total of 171 secondary metabolites were identified with no previous report for U. dermestoides. A considerable number of the identified metabolites showed previous studies of the activity of pharmacological interest. Therefore, considering the wide variety of activities reported for these metabolites, this work allows a broader vision of the therapeutic potential of U. dermestoides in traditional medicine.

Direct Synthesis of Unsymmetrical Glycosyl Disulfides from Glycosyl Bromides

AbstractA significantly fast one step reaction condition has been developed for the synthesis of unsymmetrical anomeric glycosyl disulfide derivatives in excellent yield by the treatment of anomeric glycosyl bromides with a combination of carbon disulfide (CS2) and sodium sulfide nonahydrate (Na2S ⋅ 9H2O) in the presence of symmetrical alkyl, aryl and glycosyl disulfides at room temperature. Exclusive formation of anomerically beta‐disulfides was observed under the reaction conditions. Most of the reactions are high yielding and suitable for scale‐up synthesis.

Development of Efficient and Selective Processes for the Synthesis of Commercially Important Chlorinated Phenols

para-Selective processes for the chlorination of phenols using sulphuryl chloride in the presence of various sulphur-containing catalysts have been successfully developed. Several chlorinated phenols, especially those derived by para-chlorination of phenol, ortho-cresol, meta-cresol, and meta-xylenol, are of significant commercial importance, but chlorination reactions of such phenols are not always as regioselective as would be desirable. We, therefore, undertook the challenge of developing suitable catalysts that might promote greater regioselectivity under conditions that might still be applicable for the commercial manufacture of products on a large scale. In this review, we chart our progress in this endeavour from early studies involving inorganic solids as potential catalysts, through the use of simple dialkyl sulphides, which were effective but unsuitable for commercial application, and through a variety of other types of sulphur compounds, to the eventual identification of particular poly(alkylene sulphide)s as very useful catalysts. When used in conjunction with a Lewis acid such as aluminium or ferric chloride as an activator, and with sulphuryl chloride as the reagent, quantitative yields of chlorophenols can be obtained with very high regioselectivity in the presence of tiny amounts of the polymeric sulphides, usually in solvent-free conditions (unless the phenol starting material is solid at temperatures even above about 50 °C). Notably, poly(alkylene sulphide)s containing longer spacer groups are particularly para-selective in the chlorination of m-cresol and m-xylenol, while, ones with shorter spacers are particularly para-selective in the chlorination of phenol, 2-chlorophenol, and o-cresol. Such chlorination processes result in some of the highest para/ortho ratios reported for the chlorination of phenols.

ОКИСНЮВАЛЬНА ДЕСУЛЬФУРИЗАЦІЯ НАФТОПРОДУКТІВ

The modern world market makes stringent requirements for the quality of motor fuels, in particular for sulfur content in them. The main classes of sulfur-containing compounds in petroleum fractions are thiols, dialkyl and cycloalkyl sulfides, alkylaryl sulfides, as well as heteroaromatic compounds – benzothiophene, dibenzothiophene and their alkyl derivatives. They have a negative impact on the quality of petroleum products. Growing demands on the quality of oil and petroleum products have led to the search for ways to reduce the sulfur content in oils and which would not lead to deterioration of physicochemical parameters of oil, such as viscosity, density, acidity, elemental and fractional composition, etc. Among the existing methods of desulfurization of oils and their fractions, special attention is drawn to oxidation methods that allow organic sulfur compounds to be converted into sulfoxides and sulfones which are easily removed by conventional separation methods, in particular by extraction or adsorption. The prospects of the oxidation method are due to the possibility of practical use of sulfoxides and sulfones in various sectors of the economy. The most common oxidants in the processes of oxidative desulfurization of petroleum fractions are hydrogen peroxide and alkylhydroperoxides in combination with catalysts that provide high selectivity and speed of the process. Transition metal compounds (Mo, V, W,) are most often used as catalysts because they are able to form peroxocomplexes in the presence of peroxides. Heterogeneous catalytic systems consisting of various solid carriers (salts, oxides, activated carbon, zeolites) and peroxide oxidants (hydrogen peroxide or alkyl hydroperoxides) are actively developing. Molybdenum-containing catalysts are one of the most efficient heterogeneous systems for oxidative desulfurization of diesel fuel. There is proved the effectiveness of oxidative desulfurization, which is a combination of catalytic oxidation of sulfur-containing compounds in the presence of a heterogeneous catalyst and adsorption on activated carbon. Methods of oxidative desulfurization with their advantages and disadvantages can be logical addition to large-tonnage hydrotreating processes, and also potentially can be used as an independent method of deep purification of oil and petroleum products from sulfur-containing compounds.

Nucleophilicities and Nucleofugalities of Thio- and Selenoethers.

Rate constants for the reactions of dialkyl chalcogenides with laser flash photolytically generated benzhydrylium ions have been measured photometrically to integrate them into the comprehensive benzhydrylium‐based nucleophilicity scale. Combining these rate constants with the previously reported equilibrium constants for the same reactions provided the corresponding Marcus intrinsic barriers and made it possible to quantify the leaving group abilities (nucleofugalities) of dialkyl sulfides and dimethyl selenide. Due to the low intrinsic barriers, dialkyl chalcogenides are fairly strong nucleophiles (comparable to pyridine and N‐methylimidazole) as well as good nucleofuges; this makes them useful group‐transfer reagents.

Photo-induced transition-metal and photosensitizer free cross–coupling of aryl halides with disulfides

A simple and efficient cross-coupling of aryl halides with different alkyl disulfides under mild conditions was developed. This C–S bond formation method was carried out in the absence of transition-metal and external photosensitizer under air. Excellent yields were obtained with a broad substrate scope under mild conditions, tolerating various functional groups.

Organocatalytic sulfoxidation

Treatment of a sulfide with a catalytic amount of a 1,3-diketone in the presence of silica sulfuric acid as a co-catalyst and hydrogen peroxide (50% aq) as the stoichiometric oxidant leads to the corresponding sulfoxide product. The reaction is effective for diaryl, aryl-alkyl and dialkyl sulfides and is tolerant of oxidisable and acid sensitive functional groups. Investigations have shown that the tris-peroxide 2, formed on reaction of pentane-2,4-dione with hydrogen peroxide under acidic reaction conditions, can oxidise two equivalents of sulfide using the exocyclic peroxide groups whereas the endocyclic peroxide remains intact. Calculations provide a mechanism consistent with experimental observations and suggest the reaction proceeds via an initial acid catalysed ring opening of a protonated tris-peroxide prior to oxygen transfer to a sulfur nucleophile.

Synthesis and biological properties of a series of aryl alkyl disulfide derivatives

Disulfide containing compounds are recognized for their wide range of biological properties and are known for their important applications in the pharmaceutical field. In this study, a series of diaryl disulfides with varying alkyl chain length (C8-C16) was synthesized and assessed for their physicochemical and biological properties. The interactions of compounds with bovine serum albumin (BSA) was investigated in order to study their ability to bind with blood serum protein. An increase in the binding constants (Ka) was observed with increasing chain length C8-C12, while a decrease in value was obtained with compounds of chain length C14 and C16 showing a cut off effect at C12. The thermodynamic parameters of binding indicated that the compounds bound to BSA mostly by van der Waals forces and hydrogen bonding. Molecular docking studies showed that the diaryl disulfides displayed greater binding affinity to Trp 213 rather than the Trp 134 residue on the BSA molecule. The trend observed in molecular docking is in line with the fluorescence binding studies whereby the C12 derivative was found to show optimum affinity with BSA. The disulfide with chain length C10 showed moderate antibacterial activity the highest inhibitory activity against Bacillus cereus. The cytotoxicity of the disulfides towards HaCaT cells decreased from C8 to C14. The overall results obtained show that these disulfides have potent antibacterial properties against Gram-positive bacteria Bacillus cereus at concentrations which are relatively non-toxic to normal cells.

Dynamic Bonds Mediate π-π Interaction via Phase Locking Effect for Enhanced Heat Resistant Thermoplastic Polyurethane

Stimulus-responsive polymers containing dynamic bonds enable fascinating properties of self-healing, recycling and reprocessing due to enhanced relaxation of polymer chain/network with labile linkages. Here, we study the structure and properties of a new type of thermoplastic polyurethanes (TPUs) with trapped dynamic covalent bonds in the hard-phase domain and report the frustrated relaxation of TPUs containing weak dynamic bond and π-π interaction in hard segments. As detected by rheometry, the aromatic TPUs with alkyl disulfide in the hard segments possess the maximum network relaxation time in contrast to those without dynamic bonds and alicyclic TPUs. In situ FTIR and small-angle scattering results reveal that the alkyl disulfide facilitates stronger intermolecular interaction and more stable micro-phase morphology in π-π interaction based aromatic TPUs. Molecular dynamics simulation for pure hard segments of model molecules verify that the presence of disulfide bonds leads to stronger π-π stacking of aromatic rings due to both enhanced assembling thermodynamics and kinetics. The enhanced π-π packing and micro-phase structure in TPUs further kinetically immobilize the dynamic bond. This kinetically interlocking between the weak dynamic bonds and strong molecular interaction in hard segments leads to much slower network relaxation of TPU. This work provides a new insight in tuning the network relaxation and heat resistance as well as molecular self-assembly in stimulus-responsive dynamic polymers by both molecular design and micro-phase control toward the functional applications of advanced materials.

N-Aminopyridinium Ylide-Directed, Copper-Promoted Chalcogenation of Arene C-H Bonds.

N-Aminopyridinium ylide-directing group is employed for copper-promoted chalcogenation of sp2 C-H bonds with aryl and alkyl disulfides as well as diphenyl diselenide. Reactions proceed in hexafluoroisopropanol (HFIP) solvent at elevated temperatures and are promoted by copper(II) acetate.

Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.

Nickel-Catalyzed Negishi-Type Arylation of Trialkylsulfonium Salts

Negishi-type arylation of trialkylsulfonium salts with arylzinc reagents has been accomplished under nickel catalysis. The use of cyclohexanethiol as an additional ligand was found to be particularly important to promote C–S cleavage. The present reaction accommodates one-pot arylation of dialkyl sulfides by combining with S-methylation with MeOTf. Mechanistic experiments suggest that C–S cleavage would proceed via single-electron transfer (SET) to generate the most stable carbon-centered radical and that the thiolate ligand would promote the C–S cleavage and radical recombination step.

Continuous Bioinspired Oxidation of Sulfides.

A simple, efficient, and selective oxidation under flow conditions of sulfides into their corresponding sulfoxides and sulfones is reported herein, using as a catalyst perselenic acid generated in situ by the oxidation of selenium (IV) oxide in a diluted aqueous solution of hydrogen peroxide as the final oxidant. The scope of the proposed methodology was investigated using aryl alkyl sulfides, aryl vinyl sulfides, and dialkyl sulfides as substrates, evidencing, in general, a good applicability. The scaled-up synthesis of (methylsulfonyl)benzene was also demonstrated, leading to its gram-scale preparation.

SYNTHESIS OF UREA-HYDROGEN PEROXIDE AND ITS APPLICATION FOR PREPARING THIOSULFINATE

The Urea-Hydrogen Peroxide complex (UHP) was synthesized from urea and hydrogen peroxide, characterized by FT-IR. This UHP complex could be employed as an oxidizing agent for metal-free oxidation reaction of disulfides to thiosulfinate compounds. This protocol was carried out under very mild conditions at 0oC in CH3CO2H solvent, was efficient and compatible with a range of alkyl, aryl or allyl disulfides to afford direct access to thiosulfinate compounds in very good yields up to 92% and high selectivities.