Diacrylate Hydrogels Research Articles

Insertable Biomaterial-Based Multianalyte Barcode Sensor toward Continuous Monitoring of Glucose and Oxygen.

Chronic diseases, including diabetes, cardiovascular diseases, and microvascular complications, contribute significantly to global morbidity and mortality. Current monitoring tools such as glucometers and continuous glucose monitors only measure one analyte; multiplexing technologies offer a promising approach for monitoring multiple biomarkers, enabling the management of comorbidities and providing more comprehensive disease insights. In this work, we describe a miniaturized optical "barcode" sensor with high biocompatibility for the continuous monitoring of glucose and oxygen. This enzymatic sensor relies on oxygen consumption in proportion to local glucose levels and the phosphorescence reporting of tissue oxygen with a lifetime-based probe. The sensor was specifically designed to operate in a tissue environment with low levels of dissolved oxygen. The barcode sensor consists of a poly(ethylene glycol) diacrylate (PEGDA) hydrogel with four discrete compartments separately filled with glucose- or oxygen-sensing phosphorescent microparticles. We evaluated the response of the barcode hydrogels to fluctuating glucose levels over the physiological range under low oxygen conditions, demonstrating the controlled tuning of dynamic range and sensitivity. Moreover, the barcode sensor exhibited remarkable storage stability over 12 weeks, along with full reversibility and excellent reproducibility (∼6% variability in the phosphorescence lifetime) over nearly 50 devices. Electron beam sterilization had a negligible effect on the glucose response of the barcode sensors. Furthermore, our investigation revealed minimal phosphorescence lifetime changes in oxygen compartments while exhibiting increased lifetime in glucose-responsive compartments when subjected to alternating glucose concentrations (0 and 200 mg/dL), showcasing the sensor's multianalyte sensing capabilities without crosstalk between compartments. Additionally, the evaluation of chronic tissue response to sensors inserted in pigs revealed the appropriate biocompatibility of the barcodes as well as excellent material stability over many months. These findings support further development of similar technologies for introducing optical assays for multiple biomarkers that can provide continuous or on-demand feedback to individuals to manage chronic conditions.

Optical fiber fluorescence Cu2+ sensing technology based on CdSe/ZnS quantum dots: Large detection range, low detection limit

BackgroundCopper ion (Cu2+), a crucial heavy metal ion, is closely associated with human health and the ecological environment. Imbalances in Cu2+ can result in health issues for humans and damage to the ecosystem. Therefore, it is essential to detect Cu2+ in the environment. However, current Cu2+ sensors still face challenges such as limited detection range, poor detection limits, high costs, and complex preparation processes. Clearly, there is a need for a Cu2+ sensor with an extensive detection range, low detection limit, cost-effectiveness, and simple preparation methods that enable online monitoring and real-time measurement of Cu2+. ResultsIn this paper, a high-performance optical fiber fluorescent Cu2+ sensor based on polyethylene glycol diacrylate (PEGDA) hydrogel encapsulated CdSe/ZnS quantum dots (QDs) is designed and fabricated. Due to the porous nature of PEGDA hydrogels, large-diameter CdSe/ZnS QDs are confined within the hydrogels, while small molecules Cu2+ are allowed to permeate them. Cu2+ reacts with QDs, resulting in the fluorescence quenching of QDs, which enables the detection of Cu2+. Experimental results show that the sensor can quantitatively analyze Cu2+ in the concentration range of 0.1–200 μM, with a limit of detection (LOD) of only 0.8 nM, and the fastest response time is only 5 s. Additionally, the sensor exhibits strong specificity, has been successfully applied to real water sample detection, demonstrates good stability, and shows great potential for real-time Cu2+ detection. SignificanceThe sensor possesses a large detection range and low LOD, and the synthesis of its core fluorescent probe is straightforward and expedient. Specifically, the fluorescent probe can be synthesized by subjecting a solution of hydrogel precursors doped with CdSe/ZnS QDs to UV irradiation for approximately 2 min. This method is particularly suitable for monitoring confined environments and holds significant implications for the production of Cu2+ sensors capable of real-time detection.

Design of an electrochemical hydrogel nanocomposite immunosensor for the detection of hemoglobin in blood

A novel hybrid hydrogel nanocomposite immunosensor was developed for the electrochemical detection of hemoglobin in blood. The transducing element was based on carbon black (CB)-nanomodified screen-printed electrodes (SPEs) on which a poly(ethylene glycol)-diacrylate hydrogel (PEGDA) doped with gold nanoparticles (AuNPs) was photopolymerized in situ. The fabricated PEGDA-AuNPs/CB-SPEs were then functionalized with oriented anti-hemoglobin antibodies. The immunosensor was analyzed by Electrochemical Impedance Spectroscopy (EIS) and Differential Pulse Voltammetry (DPV) at different modification steps, while its morphology was evaluated by Scanning Electron Microscopy (SEM). The analytical performances of the resulting PEGDA-AuNPs/CB-SPE immunosensor were assessed by DPV analysis, demonstrating the ability of the proposed system to detect hemoglobin in both standard solution and serum samples with a limit of detection (LOD) of 0.005 mg/mL within a dynamic response in a concentration range from 0.005 to 0.1 mg/mL. Slight interference was observed in the presence of glucose and ascorbic acid at concentrations much higher than those physiologically present in the blood. Moreover, any matrix effect was evidenced in serum samples, with a good recovery value of 107 ± 4 % obtained for a hemoglobin concentration of 0.025 mg/mL.

An atomistic and experimental approach to study the effect of water and nanofillers on the compressive strength of PEGDA hydrogels for cartilage replacement

Polyethylene glycol diacrylate (PEGDA) hydrogel is emerging as a potential candidate for biomedical applications, particularly cartilage replacement. However, due to weak mechanical strength, their applications are still in the infancy for cartilage replacement. In this article, authors have reported the compressive strength of hexagonal boron nitride (h-BN) reinforced PEGDA hydrogels in conjunction with different water content. A combined experimental and atomistic approach (Molecular Dynamics) was employed to explore the compressive strength of nanocomposite hydrogels. It was reported from the experimental analysis that h-BN acts as a superior reinforcement for the compressive strength at lower water content. The Molecular Dynamics (MD) based simulations also predict a similar trend with h-BN and water content. The MD-based study gives insight into scrutinizing the behavior of polymer chains and their entanglement and sheds light on microscale phenomena that are usually inaccessible through experiments alone. It can be concluded from the experiments in conjunction with MD simulations that at higher water content, the contact points between h-BN nanosheets and polymer chains decrease, mitigating the overall compressive strength of PEGDA hydrogels. In summary, this study enables us to obtain meaningful mechanical properties that mimic the strength of human articular cartilage.

A Reconfigurable Proangiogenic Hydrogel Patch Enabling Minimally Invasive Drug Delivery.

Hydrogel is widely used for the sustained delivery of bioactive molecules that can treat various injuries, diseases, and tissue defects. However, inserting hydrogel implants without disrupting their functionality and microstructure often requires a large incision, leading to potential complications, such as infection, scarring, and pain. The gel implant is often manually rolled and inserted through a catheter for a minimally invasive delivery. However, success heavily depends on the user's skills, which can inadvertently damage the implant. To address this issue, we developed a reconfigurable hydrogel patch that can self-fold into a small tube and unfold spontaneously after implantation through a catheter. The hydrogel path was assembled by layering a drug-releasing poly(ethylene glycol) diacrylate (PEGDA) hydrogel sheet onto a PEGDA and polyethylenimine (PEI) hydrogel sheet, which rapidly swells and degrades homogeneously at controlled rates. The dynamics of the self-folding and unfolding process could be controlled by differences in the expansion ratio and elastic modulus between the two gel layers according to a mathematical model that closely matched experimental results. The unfolding process triggered a sustained release of the protein cargo. Specifically, the reconfigurable gel loaded with angiopoietin 1 significantly enhanced neovascularization, nearly doubling the vascular density compared to the control group following implantation through a tube with 15% smaller diameter than the original shape of the gel patch. This gel biopatch will be broadly useful for the minimally invasive delivery of a wide array of therapeutic molecules, potentially enhancing therapeutic outcomes.

Integrating Mechanics and Bioactivity: A Detailed Assessment of Elasticity and Viscoelasticity at Different Scales in 2D Biofunctionalized PEGDA Hydrogels for Targeted Bone Regeneration.

Methods for promoting and controlling the differentiation of human mesenchymal stem cells (hMSCs) in vitro before in vivo transplantation are crucial for the advancement of tissue engineering and regenerative medicine. In this study, we developed poly(ethylene glycol) diacrylate (PEGDA) hydrogels with tunable mechanical properties, including elasticity and viscoelasticity, coupled with bioactivity achieved through the immobilization of a mixture of RGD and a mimetic peptide of the BMP-2 protein. Despite the key relevance of hydrogel mechanical properties for cell culture, a standard for its characterization has not been proposed, and comparisons between studies are challenging due to the different techniques employed. Here, a comprehensive approach was employed to characterize the elasticity and viscoelasticity of these hydrogels, integrating compression testing, rheology, and atomic force microscopy (AFM) microindentation. Distinct mechanical behaviors were observed across different PEGDA compositions, and some consistent trends across multiple techniques were identified. Using a photoactivated cross-linker, we controlled the functionalization density independently of the mechanical properties. X-ray photoelectrin spectroscopy and fluorescence microscopy were employed to evaluate the functionalization density of the materials before the culturing of hMSCs on them. The cells cultured on all functionalized hydrogels expressed an early osteoblast marker (Runx2) after 2 weeks, even in the absence of a differentiation-inducing medium compared to our controls. Additionally, after only 1 week of culture with osteogenic differentiation medium, cells showed accelerated differentiation, with clear morphological differences observed among cells in the different conditions. Notably, cells on stiff but stress-relaxing hydrogels exhibited an overexpression of the osteocyte marker E11. This suggests that the combination of the functionalization procedure with the mechanical properties of the hydrogel provides a potent approach to promoting the osteogenic differentiation of hMSCs.

Understanding the Response of Poly(ethylene glycol) diacrylate (PEGDA) Hydrogel Networks: A Statistical Mechanics-Based Framework.

Thanks to many promising properties, including biocompatibility and the ability to experience large deformations, poly(ethylene glycol) diacrylate (PEGDA) hydrogels are excellent candidate materials for a wide range of applications. Interestingly, the polymerization of PEGDA leads to a network microstructure that is fundamentally different from that of the "classic" polymeric gels. Specifically, PEGDA hydrogels comprise PEG chains that are interconnected by multifunctional densely grafted rod-like polyacrylates (PAs), which serve as cross-linkers. In this work, we derive a microstructurally motivated model that captures the essential features which enable deformation in PEGDA hydrogels: (1) entropic elasticity of PEG chains, (2) deformation of PA rods, and (3) PA-PA interactions. Expressions for the energy-density functions and the stress associated with each of the three contributions are derived. The model demonstrates the microstructural evolution of the network during loading and reveals the role of key microscopic quantities. To validate the model, we fabricate and compress PEGDA hydrogel discs. The model is in excellent agreement with our experimental findings for a broad range of PEGDA compositions. Interestingly, we show that the response of PEGDA hydrogels with short PEG chains and long PA rods is governed by PA-PA interactions, whereas networks with longer PEG chains are dominated by entropy. To enable design, we employ the model to investigate the influence of key microstructural quantities, such as the length of the PEG and the PA chains, on the macroscopic properties and response. The findings from this work pave the way to the efficient design of PEGDA hydrogels with tunable properties and behaviors, which will enable the optimization of their performance in various applications.

Fabrication and Characterization of Porous PEGDA Hydrogels for Articular Cartilage Regeneration.

Functional articular cartilage regeneration remains an unmet medical challenge, increasing the interest for innovative biomaterial-based tissue engineering (TE) strategies. Hydrogels, 3D macromolecular networks with hydrophilic groups, present articular cartilage-like features such as high water content and load-bearing capacity. In this study, 3D porous polyethylene glycol diacrylate (PEGDA) hydrogels were fabricated combining the gas foaming technique and a UV-based crosslinking strategy. The 3D porous PEGDA hydrogels were characterized in terms of their physical, structural and mechanical properties. Our results showed that the size of the hydrogel pores can be modulated by varying the initiator concentration. In vitro cytotoxicity tests showed that 3D porous PEGDA hydrogels presented high biocompatibility both with human chondrocytes and osteoblast-like cells. Importantly, the 3D porous PEGDA hydrogels supported the viability and chondrogenic differentiation of human bone marrow-derived mesenchymal stem/stromal cell (hBM-MSC)-based spheroids as demonstrated by the positive staining of typical cartilage extracellular matrix (ECM) (glycosaminoglycans (GAGs)) and upregulation of chondrogenesis marker genes. Overall, the produced 3D porous PEGDA hydrogels presented cartilage-like mechanical properties and supported MSC spheroid chondrogenesis, highlighting their potential as suitable scaffolds for cartilage TE or disease modelling strategies.

Gold-Hydrogel Nanocomposites for High-Resolution Laser-Based 3D Printing of Scaffolds with SERS-Sensing Properties.

Although visible light-based stereolithography (SLA) represents an affordable technology for the rapid prototyping of 3D scaffolds for in vitro support of cells, its potential could be limited by the lack of functional photocurable biomaterials that can be SLA-structured at micrometric resolution. Even if innovative photocomposites showing biomimetic, bioactive, or biosensing properties have been engineered by loading inorganic particles into photopolymer matrices, main examples rely on UV-assisted extrusion-based low-resolution processes. Here, SLA-printable composites were obtained by mixing a polyethylene glycol diacrylate (PEGDA) hydrogel with multibranched gold nanoparticles (NPs). NPs were engineered to copolymerize with the PEGDA matrix by implementing a functionalization protocol involving covalent grafting of allylamine molecules that have C═C pendant moieties. The formulations of gold nanocomposites were tailored to achieve high-resolution fast prototyping of composite scaffolds via visible light-based SLA. Furthermore, it was demonstrated that, after mixing with a polymer and after laser structuring, gold NPs still retained their unique plasmonic properties and could be exploited for optical detection of analytes through surface-enhanced Raman spectroscopy (SERS). As a proof of concept, SERS-sensing performances of 3D printed plasmonic scaffolds were successfully demonstrated with a Raman probe molecule (e.g., 4-mercaptobenzoic acid) from the perspective of future extensions to real-time sensing of cell-specific markers released within cultures. Finally, biocompatibility tests preliminarily demonstrated that embedded NPs also played a key role by inducing physiological cell-cytoskeleton rearrangements, further confirming the potentialities of such hybrid nanocomposites as groundbreaking materials in laser-based bioprinting.

Dual-Mode Multicolor Display Based on Structural and Fluorescent Color CdS Photonic Crystal Hydrogel.

In this study, we prepared a multicolor structural-fluorescent CdS-PEGDA photonic crystal hydrogel (SFC-CPH) with a dual display mode, which has two different optical states: structural color mode and fluorescent color mode. SFC-CPH displays structural color mode under visible light and fluorescent color mode under ultraviolet light. Initially, monodisperse CdS colloidal particles were synthesized via a hydrothermal method, leading to the self-assembly of a photonic crystal template. The high refractive index of CdS contributes to the photonic crystals' low-angle dependence and vivid structural colors. Then, a variety of fluorescent molecules were doped into poly(ethylene glycol) diacrylate (PEGDA) hydrogel and combined with photonic crystals with distinct structural colors to prepare three distinct colors of SFC-CPH. We also investigated the optical characteristics and surface properties of these photonic crystal hydrogels. Based on these dual-mode display characteristics, we designed several dual-mode display patterns and a method for information encoding. The unique property of this photonic crystal hydrogel material suggests its substantial potential for applications in information storage, security, and encoding, offering innovative avenues in the realm of information display.

Thermal Transport Phenomena in PEGDA-Based Nanocomposite Hydrogels Using Atomistic and Experimental Techniques.

Poly(ethylene glycol) diacrylate (PEGDA) hydrogel is a very peculiar, fascinating material with good chemical stability and biocompatibility. However, the poor thermal transport phenomenon in PEGDA, limits its performance in cartilage replacement and developing therapies for treating burns. In this article, a combined experimental and atomistic approach was adopted to investigate the thermal transport phenomena in PEGDA hydrogel with different weight concentrations of boron nitride nanoplatelets as a function of water content. The incorporation of boron nitride nanofillers helps in enhancing the thermal conductivity of PEGDA hydrogels, and the reinforcement effect was more dominating at lower water content. Experimental investigation was complemented with molecular dynamics-based studies to capture the effect of defective (bicrystalline) boron nitride nanosheets on the interfacial thermal conductance in PEGDA hydrogels. It can be concluded from the simulations that defective nanosheets are superior reinforcement for enhancing the thermal transport in PEGDA hydrogels, and this is independent of the water content. These biocompatible boron nitride nanoparticle (BNNP)-incorporated PEGDA hydrogels with enhanced thermal conductivity are promising materials in addressing locally overheating tissues such as cartilage replacement. They may have comprehensive utility for biomedical applications such as tissue engineering, drug delivery, biosensors, and burn therapy.

Controlled Mechanical Property Gradients Within a Digital Light Processing Printed Hydrogel-Composite Osteochondral Scaffold.

Tissue engineered scaffolds are needed to support physiological loads and emulate the micrometer-scale strain gradients within tissues that guide cell mechanobiological responses. We designed and fabricated micro-truss structures to possess spatially varying geometry and controlled stiffness gradients. Using a custom projection microstereolithography (μSLA) system, using digital light projection (DLP), and photopolymerizable poly(ethylene glycol) diacrylate (PEGDA) hydrogel monomers, three designs with feature sizes < 200μm were formed: (1) uniform structure with 1MPa structural modulus ( ) designed to match equilibrium modulus of healthy articular cartilage, (2) = 1MPa gradient structure designed to vary strain with depth, and (3) osteochondral bilayer with distinct cartilage ( = 1MPa) and bone ( = 7MPa) layers. Finite element models (FEM) guided design and predicted the local mechanical environment. Empty trusses and poly(ethylene glycol) norbornene hydrogel-infilled composite trusses were compressed during X-ray microscopy (XRM) imaging to evaluate regional stiffnesses. Our designs achieved target moduli for cartilage and bone while maintaining 68-81% porosity. Combined XRM imaging and compression of empty and hydrogel-infilled micro-truss structures revealed regional stiffnesses that were accurately predicted by FEM. In the infilling hydrogel, FEM demonstrated the stress-shielding effect of reinforcing structures while predicting strain distributions. Composite scaffolds made from stiff μSLA-printed polymers support physiological load levels and enable controlled mechanical property gradients which may improve in vivo outcomes for osteochondral defect tissue regeneration. Advanced 3D imaging and FE analysis provide insights into the local mechanical environment surrounding cells in composite scaffolds.

Three-Dimensional Printed Filters Based on Poly(ethylene glycol) Diacrylate Hydrogels Doped with Silver Nanoparticles for Removing Hg(II) Ions from Water.

Nowadays, due to water pollution, more and more living beings are exposed to dangerous compounds, which can lead to them contracting diseases. The removal of contaminants (including heavy metals) from water is, therefore, a necessary aspect to guarantee the well-being of living beings. Among the most used techniques, the employment of adsorbent materials is certainly advantageous, as they are easy to synthesize and are cheap. In this work, poly(ethylene glycol) diacrylate (PEGDA) hydrogels doped with silver nanoparticles (AgNPs) for removing Hg(II) ions from water are presented. AgNPs were embedded in PEGDA-based matrices by using a photo-polymerizable solution. By exploiting a custom-made 3D printer, the filters were synthesized. The kinetics of interaction was studied, revealing that the adsorption equilibrium is achieved in 8 h. Subsequently, the adsorption isotherms of PEGDA doped with AgNPs towards Hg(II) ions were studied at different temperatures (4 °C, 25 °C, and 50 °C). In all cases, the best isotherm model was the Langmuir one (revealing that the chemisorption is the driving process and the most favorable one), with maximum adsorption capacities equal to 0.55, 0.57, and 0.61 mg/g, respectively. Finally, the removal efficiency was evaluated for the three temperatures, obtaining for 4 °C, 25 °C, and 50 °C the values 94%, 94%, and 86%, respectively.

Harnessing Mechanical Stress with Viscoelastic Biomaterials for Periodontal Ligament Regeneration.

The viscoelasticity of mechanically sensitive tissues such as periodontal ligaments (PDLs) is key in maintaining mechanical homeostasis. Unfortunately, PDLs easily lose viscoelasticity (e.g., stress relaxation) during periodontitis or dental trauma, which disrupt cell-extracellular matrix (ECM) interactions and accelerates tissue damage. Here, Pluronic F127 diacrylate (F127DA) hydrogels with PDL-matched stress relaxation rates and high elastic moduli are developed. The hydrogel viscoelasticity is modulated without chemical cross-linking by controlling precursor concentrations. Under cytomechanical loading, F127DA hydrogels with fast relaxation rates significantly improved the fibrogenic differentiation potential of PDL stem cells (PDLSCs), while cells cultured on F127DA hydrogels with various stress relaxation rates exhibited similar fibrogenic differentiation potentials with limited cell spreading and traction forces under static conditions. Mechanically, faster-relaxing F127DA hydrogels leveraged cytomechanical loading to activate PDLSC mechanotransduction by upregulating integrin-focal adhesion kinase pathway and thus cytoskeletal rearrangement, reinforcing cell-ECM interactions. In vivo experiments confirm that faster-relaxing F127DA hydrogels significantly promoted PDL repair and reduced abnormal healing (e.g., root resorption and ankyloses) in delayed replantation of avulsed teeth. This study firstly investigated how matrix nonlinear viscoelasticity influences the fibrogenesis of PDLSCs under mechanical stimuli, and it reveals the underlying mechanobiology, which suggests novel strategies for PDL regeneration.

In Situ Single-Cell Bacterial Imaging Provides Mechanistic Insight into the Photodynamic Action of Photosensitizer-Loaded Hydrogels.

Hydrogels, three-dimensional hydrophilic polymeric networks with high water retaining capacity, have gained prominence in wound management and drug delivery due to their tunability, softness, permeability, and biocompatibility. Electron-beam polymerized poly(ethylene glycol) diacrylate (PEGDA) hydrogels are particularly useful for phototherapies such as antimicrobial photodynamic therapy (aPDT) due to their excellent optical properties. This work takes advantage of the transparency of PEGDA hydrogels to investigate bacterial responses to aPDT at the single-cell level, in real-time and in situ. The photosensitizer methylene blue (MB) was loaded in PEGDA hydrogels by using two methods: reversible loading and irreversible immobilization within the 3D polymer network. MB release kinetics and singlet oxygen generation were studied, revealing the distinct behaviors of both hydrogels. Real-time imaging of Escherichia coli was conducted during aPDT in both hydrogel types, using the Min protein system to report changes in bacterial physiology. Min oscillation patterns provided mechanistic insights into bacterial photoinactivation, revealing a dependence on the hydrogel preparation method. This difference was attributed to the mobility of MB within the hydrogel, affecting its direct interaction with bacterial membranes. These findings shed light on the complex interplay between hydrogel properties and the bacterial response during aPDT, offering valuable insights for the development of antibacterial wound dressing materials. The study demonstrates the capability of real-time, single-cell fluorescence microscopy to unravel dynamic bacterial behaviors in the intricate environment of hydrogel surfaces during aPDT.

Bioactive Polyurethane-Poly(ethylene Glycol) Diacrylate Hydrogels for Applications in Tissue Engineering.

Polyurethanes (PUs) are a highly adaptable class of biomaterials that are among some of the most researched materials for various biomedical applications. However, engineered tissue scaffolds composed of PU have not found their way into clinical application, mainly due to the difficulty of balancing the control of material properties with the desired cellular response. A simple method for the synthesis of tunable bioactive poly(ethylene glycol) diacrylate (PEGDA) hydrogels containing photocurable PU is described. These hydrogels may be modified with PEGylated peptides or proteins to impart variable biological functions, and the mechanical properties of the hydrogels can be tuned based on the ratios of PU and PEGDA. Studies with human cells revealed that PU-PEG blended hydrogels support cell adhesion and viability when cell adhesion peptides are crosslinked within the hydrogel matrix. These hydrogels represent a unique and highly tailorable system for synthesizing PU-based synthetic extracellular matrices for tissue engineering applications.

Rheological behavior of Pluronic/Pluronic diacrylate hydrogels used for bacteria encapsulation in engineered living materials.

Pluronic (Plu) hydrogels mixed with variable fractions of Pluronic diacrylate (PluDA) have become popular matrices to encapsulate bacteria and control their growth in engineered living materials. Here we study the rheological response of 30 wt% Plu/PluDA hydrogels with PluDA fraction between 0 and 1. We quantify the range of viscoelastic properties that can be covered in this system by varying in the PluDA fraction. We present stress relaxation and creep-recovery experiments and describe the variation of the critical yield strain/stress, relaxation and recovery parameters of Plu/PluDA hydrogels as function of the covalent crosslinking degree using the Burgers and Weilbull models. The analyzed hydrogels present two stress relaxations with different timescales which can be tuned with the covalent crosslinking degree. We expect this study to help users of Plu/PluDA hydrogels to estimate the mechanical properties of their systems, and to correlate them with the behaviour of bacteria in future Plu/PluDA devices of similar composition.

ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects.

Corneal transplantation is the gold standard treatment for corneal-related blindness; however, this strategy faces challenges such as limited donor cornea, graft rejection, suture-related complications, and the need for specialized equipment and advanced surgical skills. Development of tissue adhesives for corneal regeneration is of great clinical value. However, currently available corneal tissue sealants pose challenges, such as lack of safety, biocompatibility, and desired mechanical properties. To meet these requirements simultaneously, a bovine stromal corneal extracellular matrix (dCor) was used to design a bioadhesive photocurable hydrogel based on gelatin methacrylate (GelMA) and polyethylene glycol diacrylate (PEGDA) hydrogels (dCor/Gel-PEG). Integration of dCor into the dual networks of GelMA and PEGDA (Gel-PEG) led to a bioadhesive hydrogel for curing corneal defects, which could be crosslinked by Irgacure 2959 within 5 min ultraviolet irradiation. The viability of corneal stromal stem cells (CSSCs) was improved on the dCor/Gel-PEG hydrogel in comparison to the Gel-PEG hydrogel. The gene expression profile supported the keratocyte differentiation of CSSCs seeded on dCor/Gel-PEG via increased KERA and ALDH, with inhibited myofibroblast transdifferentiation via decreased α-SMA due to the presence of dCor. Interestingly, the dCor/Gel-PEG hydrogel exhibited favorable mechanical performance in terms of elasticity and bioadherence to the host corneal stroma. Ex vivo and in vivo examinations proved the feasibility of this hydrogel for the sutureless reconstruction of deep anterior corneal defects with promising histopathological results.

Selectively cross-linked hydrogel-based cocktail drug delivery micro-chip for colon cancer combinatorial drug screening using AI-CSR platform for precision medicine.

Cancer, ranked as the second leading cause of global mortality with a prevalence of 1 in 6 deaths, necessitates innovative approaches for effective treatment. Combinatorial drug therapy for cancer treatment targets several key pathways simultaneously and potentially enhances anti-cancer efficacy without intolerable side effects. However, it demands precise and accurate control of drug-dose combinations and their release. In this study, we demonstrated a selectively cross-linked hydrogel-based platform that can quantify and release drugs simultaneously for in-parallel cocktail drug screening. PDMS was used as the flow channel substrate and the poly (ethylene glycol) diacrylate (PEGDA) hydrogel array was formed by UV exposure using the photomask. Employing our platform, cocktails of anticancer drugs are precisely loaded and simultaneously released in-parallel into HCT-116 colon cancer cells, facilitating combinatorial drug screening. The integration of an artificial intelligence-based complex system response (AI-CSR) platform successfully identifies optimal drug-dose combinations from a pool of ten approved drugs. Notably, our cocktail drug chip demonstrates exceptional efficiency, screening 155 drug-dose combinations within a brief two and a half hours, a marked improvement over traditional methods. Furthermore, the device exhibits low drug consumption, requiring a mere 1 μL per patch of chip. Thus, our developed PDMS drug-loaded hydrogel platform presents a novel and expedited approach to quantifying drug concentrations, promising to be a faster, efficient and more precise approach for conducting cocktail drug screening experiments.

ZnO Quantum Photoinitiators as an All-in-One Solution for Multifunctional Photopolymer Nanocomposites.

Nanocomposites are constructed from a matrix material combined with dispersed nanosized filler particles. Such a combination yields a powerful ability to tailor the desired mechanical, optical, electrical, thermodynamic, and antimicrobial material properties. Colloidal semiconductor nanocrystals (SCNCs) are exciting potential fillers, as they display size-, shape-, and composition-controlled properties and are easily embedded in diverse matrices. Here we present their role as quantum photoinitiators (QPIs) in acrylate-based polymer, where they act as a catalytic radical initiator and endow the system with mechanical, photocatalytic, and antimicrobial properties. By utilizing ZnO nanorods (NRs) as QPIs, we were able to increase the tensile strength and elongation at break of poly(ethylene glycol) diacrylate (PEGDA) hydrogels by up to 85%, unlike the use of the same ZnO NRs acting merely as fillers. Simultaneously, we endowed the PEGDA hydrogels with post-polymerization photocatalytic and antimicrobial activities and showed their ability to decompose methylene blue and significantly eradicate antibiotic-resistant bacteria and viral pathogens. Moreover, we demonstrate two fabrication showcase methods, traditional molding and digital light processing printing, that can yield hydrogels with complex architectures. These results position SCNC-based systems as promising candidates to act as all-in-one photoinitiators and fillers in nanocomposites for diverse biomedical applications, where specific and purpose-oriented characteristics are required.