Evolution Of Passive Margins Research Articles

Late Cambrian-early Ordovician extensional magmatism, uplift and sedimentation of the N Gondwana margin: new field, geochemical and geochronological data from the peri-Gondwanan Central Sakarya Terrane, Sakarya Zone, NW Turkey

ABSTRACT The timing and mechanism of the crustal extension that caused blocks of continental crust to rift and drift northwards from the northern Gondwana margin during the Early Palaeozoic are currently debated. Here, we present new field, geochemical and U-Pb zircon data from peri-Gondwanan Central Sakarya terrane in NW Turkey to shed light on the timing and petrogenesis of extensional magmatism and subsequent passive margin development of the northern Gondwana margin. Our 1/25.000 scale mapping of a selected area (250 km2) has revealed a south-vergent thrust stack comprising three slices. The Middle Slice of the thrust stack consists of a gneiss-amphibolite complex that has a basement-cover type stratigraphy (before regional metamorphism). The basement unit consists of meta-granitoids, intruded by meta-syenite and banded amphibolites, with geochemical characteristics reflecting I&S-type, A-type and within plate alkaline/transitional-type magmatism, respectively. The cover meta-clastic sediments have amphibolite lenses with MORB and back-arc basin-type geochemistry. Meta-granitoid bodies yielded zircon U-Pb ages of 507 ± 16 Ma, 503 ± 12 Ma, and 488 ± 2.6 Ma (Late Cambrian-Early Ordovician), whereas the meta-syenites gave ages of 473.9 ± 5.7 Ma and 471.4 ± 2.5 Ma (late Early Ordovician); also, age of the banded amphibolite was dated as 473.3 ± 4 Ma. The youngest detrital zircon population in the pebbly quartzite sample within cover meta-sediments (458 ± 3 Ma) constrains the maximum depositional age to around early Late Ordovician. The late Early Ordovician bimodal magmatism, a key focus of our study, is interpreted to have formed in response to the Rheic Ocean rifting along the northern margin of Gondwana. The Late Cambrian granitic magmatism, a precursor to bimodal magmatism, can be explained by lithospheric thinning and upwelling of the asthenosphere to form anatectic silicic melts. The unconformity between the basement and cover units may represent the initiation of a new phase of extension at the N Gondwana margin that culminated in the northward drifting of the Central Sakarya and the opening of Palaeotethys, associated with back-arc basic magmatism in Late Ordovician-Silurian.

Relating differential crustal architecture to passive margin evolution: A case study from the Colatina Fracture Zone (SE Brazil) using apatite fission‐track thermochronology

The Colatina Fracture Zone (CFZ) defines a distinct NNW–SSE‐oriented linear zone of fractures and brittle faults that represents an inherited weak zone in the current crustal structure of the (Pre)Cambrian Araçuaí Orogen. In the Early Cretaceous, the CFZ was reactivated during rifting of West Gondwana and subsequent opening of the South Atlantic Ocean, as evidenced by the emplacement of dykes along its structural network and the development of major depocentres of the Campos Basin in the offshore segments of the CFZ. Previous thermochronological studies have demonstrated that the CFZ was also rejuvenated during the drift phase of the South Atlantic. However, a number of questions regarding differential surface uplift and basement exhumation between the CFZ and its surrounding areas, such as the Doce River Valley (DRV), are still unresolved. In this study, we aim to investigate the CFZ as a distinctive structure in the tectonic rejuvenation of the passive margin of south‐east Brazil. Samples from the CFZ and the DRV were collected for apatite fission‐track (AFT) analyses. In the DRV, samples yield AFT central ages from 87 to 97 Ma with mean track lengths (MTL) from 12.6 to 13.3 μm. In contrast, in the CFZ, AFT central ages from 70 to 83 Ma with MTL values from 13.2 and 13.4 μm are obtained. The correlation between AFT age and elevation suggests that the tectonic development of these regions was markedly different and uncoupled. The thermal history models from the AFT data further constrain this differential evolution. On the one hand, thermal history modelling for the DRV indicates a slower and protracted cooling since the incipient Atlantic rifting in the Early Cretaceous. On the other hand, the models for CFZ reveal a rapid cooling phase between the Late Cretaceous to the Palaeocene. In the DRV, the observed basement cooling was most probably triggered by erosion of the uplifted rift shoulder generated by Gondwana break‐up. The more recent, Late Cretaceous–Palaeocene rock cooling, localized in the CFZ, was synchronous with a major phase of the Andean orogeny. This suggests that reactivations and erosional exhumation of the CFZ basement could be a consequence of far‐field propagation of intraplate compressional stress. The higher susceptibility of the CFZ to reactivating over its surroundings shows that structural inheritance is a key factor in the differential tectonic evolution of passive margins. Further research on the Late Cretaceous–Palaeocene reactivation in the CFZ's offshore extension may be crucial for the exploitation of hydrocarbons in the Campos and Espírito Santos basins.

Dynamic subsidence in the Colorado basin, offshore Argentina, South Atlantic

The Colorado basin in the SW Atlantic is one of the key exploratory frontier basins along the Argentine shelf. The stratigraphy shows a typical rift basin, divided into two major seismic successions, a Jurassic-Lower Cretaceous synrift followed by an Upper Cretaceous to Cenozoic postrift. They represent, respectively, the breakup of Gondwana and passive margin evolution. While the synrift basin formation was associated with the development of structural grabens, the preservation of thick (thousands of meters) postrift sequences are still debated because they cannot be accounted for only by thermal subsidence. In this work, we conducted a multimethodological subsidence analysis across the Colorado basin, including part of the continental slope. We performed a 1D backstripping analysis on 10 hydrocarbon exploration wells and 32 pseudo-wells, covering the whole basin area and a uniform stretching model, which were supported using dynamic topography data from the study region. From the backstripping analyses, considering the six major postrift sedimentary successions described in the literature, we could recognize three subsidence stages. An initial rapid subsidence stage during the post-rift (125–83 Ma), which is restricted to the main depocenters, followed by a stage of generalized and low subsidence focused on the main axis of the basin (83–33 Ma), with an increase in the last 33 my (33–0 Ma). The stretching models exhibit a typical asymptotic curve, depicting significant subsidence at the onset of the postrift stage, gradually diminishing to minimal values within a few tens of millions of years. Upon comparing the backstripping curves with the stretching subsidence models, particularly during the final flat segments, a residual negative value emerges over time (locally exceeding −500 m), indicating considerable residual subsidence during the Cenozoic postrift evolution along the Colorado Basin. This could be interpreted as dynamic subsidence. This residual sinking in the Argentina shelf matches with dynamic topography numerical models in the study region as well as the occurrence of accumulated slabs in the mantle detected by seismic tomography studies. We propose that the accumulation of slabs along this segment of the South American subduction zone might be the drivers of dynamic subsidence, which assisted to the preservation of a large thickness of post-rift strata along the SW Atlantic margin.

Multiscalar 3D temporal structural characterisation of Smøla island, mid-Norwegian passive margin: an analogue for unravelling the tectonic history of offshore basement highs

Abstract. Smøla island, situated within the mid-Norwegian passive margin, contains crystalline-basement-hosted intricate fracture and fault arrays formed during a polyphase brittle tectonic evolution. Its detailed study may strengthen correlation attempts between the well-exposed onshore domain and the inaccessible offshore domain, further the understanding of the passive margin evolution, and provide useful constraints on petrophysical properties of fractured basement blocks. A combination of geophysical and remote sensing lineament analysis, field mapping, high-resolution drill hole logging, 3D modelling, petrographic and microstructural studies, and fault gouge K–Ar geochronology made it possible to define five deformation episodes (D1 to D5). These episodes occurred between the post-Caledonian evolution of the regional-scale Møre–Trøndelag Fault Complex (MTFC) and the Late Cretaceous and younger crustal extension preceding the final stages of Greenland–Norway break-up. Each reconstructed deformation stage is associated with different structural features, fault and fracture geometries, and kinematic patterns. Synkinematic mineralisations evolved progressively from epidote–prehnite, sericite–chlorite–calcite, chlorite–hematite, hematite–zeolite–calcite, to quartz–calcite. K–Ar geochronology constrains brittle deformation to discrete localisation events spanning from the Carboniferous to the Late Cretaceous. Multiscalar geometrical modelling at scales of 100, 10, and 1 m helps constrain the extent and size of the deformation zones of each deformation episode, with D2 structures exhibiting the greatest strike continuity and D1 features the most localised. Overall, the approach highlighted here is of great utility for unravelling complex brittle tectonic histories within basement volumes. It is also a prerequisite to constrain the dynamic evolution of the petrophysical properties of basement blocks.

Norwegian Sea Oceanic Basin and Prograded Margins Composite Tectono-Sedimentary Element

Abstract The Norwegian Sea oceanic basins and prograded margins have developed since NE Atlantic break-up in the earliest Eocene. Significant amounts of sediments were fed to the regionally subsiding and widening Norwegian Sea during the Cenozoic as a result of several phases of uplift and erosion of the bounding shelves and their hinterland. Despite an overall passive-margin evolution, the area experienced tectonic events and associated processes that interrupted the regional subsidence, causing contraction/inversion and tilting. The post-break-up depositional history of the mid-Norwegian margin comprises two main stages: (1) middle Eocene–Pliocene margin subsidence and relatively modest sedimentation during a period of climatic decline; and (2) latest Pliocene–Pleistocene full-scale northern hemisphere glaciations that resulted in deep erosion of shelves and hinterlands, and very high sedimentation rates and large-scale continental margin progradation. Slope failures within rapidly deposited glacial sediments affected both prograded margins, releasing large slides that travelled downslope into the oceanic Norway and Lofoten basins. Despite a long exploration history for hydrocarbon prospects in deeper waters and large amounts of data acquisition, no significant discovery has been made.

Compilation of Apatite Fission-Track Data from the Northeast Atlantic Realm: A Jigsaw Puzzle with Missing Pieces

Abstract The northeast (NE) Atlantic is one of the best-studied geological regions in the world, incorporating a wide array of geological phenomena including extensional tectonism, passive margin development, orogenesis, and breakup-related volcanism. Apatite fission-track (AFT) thermochronology has been an important tool in studying the onshore evolution of the NE Atlantic for several decades. Unfortunately, large regional-scale studies are rare, making it difficult to study geological processes across the whole region. In this work, a compilation of published AFT data is presented from across Fennoscandia, the British Isles, East Greenland, and Svalbard, with the goal of providing an accessible overview of the data and how this vast body of work has improved our understanding of the region’s evolution. Alongside a review of previous literature, interpolated maps of fission track age and mean track length (MTL) highlight regional trends in the data that may result from major first-order processes and areas of low sample density that should be targeted for future study. Additionally, in the absence of metadata required for thermal history modeling, apparent exhumation rate estimates are calculated from available elevation profiles and the timing of major exhumation events inferred from “boomerang plots” of fission track ages against MTL values. Across Fennoscandia, data suggests that the opening of the NE Atlantic and exhumation of the margin have clearly played a major role in the thermal history of the upper crust. The remaining areas of Britain, Ireland, East Greenland, and Svalbard all present more complex trends consistent with a combination of the NE Atlantic’s opening and the interplay between specific bedrock geology of sampling sites and localized geological processes. Areas of low sample density include southern Britain, NE Britain, southeast Greenland, southern Svalbard, and Eastern Fennoscandia, each of which provides the natural laboratory required to answer many unresolved questions.

Compilation of Apatite Fission-Track Data from the Northeast Atlantic Realm: A Jigsaw Puzzle with Missing Pieces

Abstract The northeast (NE) Atlantic is one of the best-studied geological regions in the world, incorporating a wide array of geological phenomena including extensional tectonism, passive margin development, orogenesis, and breakup-related volcanism. Apatite fission-track (AFT) thermochronology has been an important tool in studying the onshore evolution of the NE Atlantic for several decades. Unfortunately, large regional-scale studies are rare, making it difficult to study geological processes across the whole region. In this work, a compilation of published AFT data is presented from across Fennoscandia, the British Isles, East Greenland, and Svalbard, with the goal of providing an accessible overview of the data and how this vast body of work has improved our understanding of the region’s evolution. Alongside a review of previous literature, interpolated maps of fission track age and mean track length (MTL) highlight regional trends in the data that may result from major first-order processes and areas of low sample density that should be targeted for future study. Additionally, in the absence of metadata required for thermal history modeling, apparent exhumation rate estimates are calculated from available elevation profiles and the timing of major exhumation events inferred from “boomerang plots” of fission track ages against MTL values. Across Fennoscandia, data suggests that the opening of the NE Atlantic and exhumation of the margin have clearly played a major role in the thermal history of the upper crust. The remaining areas of Britain, Ireland, East Greenland, and Svalbard all present more complex trends consistent with a combination of the NE Atlantic’s opening and the interplay between specific bedrock geology of sampling sites and localized geological processes. Areas of low sample density include southern Britain, NE Britain, southeast Greenland, southern Svalbard, and Eastern Fennoscandia, each of which provides the natural laboratory required to answer many unresolved questions.

Late Ediacaran–early Cambrian rifting along the northern margin of Laurentia: constraints from the Yelverton Formation of Ellesmere Island, Canada

Neoproterozoic to early Paleozoic strata exposed along the northeastern margin of North America (Franklinian Basin) record a prolonged history of rifting and passive margin development. An episode of Ediacaran–Cambrian extension is potentially recorded in volcanic and sedimentary rocks of the Yelverton Formation, exposed on northern Ellesmere Island, Nunavut, Canada. Here, we present new whole-rock trace element and isotope geochemistry and hornblende 40Ar/39Ar geochronology from intrusive and extrusive rocks of the Yelverton Formation, along with isotope geochemistry from carbonate rocks underlying the volcanics and detrital zircon U–Pb and Lu–Hf isotopic data from the Yelverton Formation and overlying Grant Land Formation. The carbonate strata yielded an average 87Sr/86Sr value of 0.7076 ( n = 6), constraining the overlying volcanics to the late Ediacaran–early Cambrian (ca. 570–530 Ma). Flows and dikes/sills show three distinct compositions: (1) a depleted, low La/YbPM and Th/Nb group, (2) an enriched, higher La/YbPM and low Th/Nb group, and (3) a low to moderate La/YbPM and high Th/Nb group. One of the high Th/Nb intrusions produced saddle-shaped 40Ar/39Ar hornblende spectra with ca. 482 ± 7 Ma age minima and Silurian–Devonian inverse isochron ages, highlighting a hitherto unknown suite of younger intrusions and volcanic rocks. The trace element geochemistry and 143Nd/144Nd(t) ratios of enriched and depleted volcanic rocks of the indisputable Yelverton Formation are consistent with decompression melting during rifting along a continental margin. We suggest that late Ediacaran–early Cambrian rifting recorded in the Yelverton Formation resulted in the separation of peri-Laurentian terranes, such as the North Slope subterrane and eventual development of the passive margin of northern Laurentia.

Evolution of eastern passive margin of Adria recorded in shallow- to deep-water successions of the transition zone between the Alps and the Dinarides (Ivanščica Mt., NW Croatia)

Evolution of eastern passive margin of Adria recorded in shallow- to deep-water successions of the transition zone between the Alps and the Dinarides (Ivanščica Mt., NW Croatia)

Detrital zircon U–Pb analysis indicate a provenance shift on the Neogene Barreiras formation, atlantic coast of Brazil

The Neogene Barreiras Formation is composed of continental to shallow marine sedimentary rocks that fringe the Brazilian Atlantic coast. Due to the large outcropping extent, various open questions about the evolution of this unit are still under debate. We present new U–Pb detrital zircon age spectra of four samples from the southern Espírito Santo state (Marataízes section) and two samples from the southern Bahia state (Arraial section). In both of the studied outcrops, a basal succession composed of coarse-grained cross-bedded sandstone, conglomerate and arkose with mudstone and claystone intercalations is superposed by an upper succession composed of massive sandstone, conglomerate and wacke. The U–Pb detrital zircon age spectra of all samples are dominated by Cambrian and Neoproterozoic grains. However, while the lower portion of both sections is dominated by Ediacaran-Cambrian grains, their upper portions also present significant Cryogenian-Tonian and sparse Paleoproterozoic (mainly Rhyacian and Statherian) and Neoarchean grains. This marks an important provenance shift within the Barreiras Formation, with a simple, local provenance sourced from the G1 to G5 granite supersuites of the Brasiliano Araçuaí Orogen for the basal layers contrasting with exposure of older basement rocks and Neoproterozoic anorogenic suites during deposition of the superior layers. We interpret the lower coarse sandstone and arkose-rich succession as deposited in an alluvial setting, with mud/claystones related to local flooding plains. Tectonic movements related to the evolution of the Atlantic passive margin, as described in previous works, caused a renewed uplift of the basement areas, exposing and denuding older rocks. Then, the upper layers deposited through debris flows covering the first succession. Further geochronological data is needed to test if the erosional event responsible for exposure of older basement rocks and sourcing of the upper layers would correspond to the Tortonian Sea level fall, related to growth of the Antarctic ice sheet to its present size. In this case, deposition of the lower succession would have occurred during the early Miocene, and the upper succession during the Pliocene. Our results shed light in the complex evolution of the sedimentary rocks generally grouped under the Barreiras Formation, and suggest important tectonic and climatic shifts during the Neogene evolution of the Brazilian Atlantic coast.

Formation and evolution of a magmatic system in the Indian passive margin: Insights from the Triassic Yumai Complex from the eastern Tethyan Himalaya

Abstract The Indian passive margin has preserved several pulses of magmatism during and after the disassembly of Gondwana since the late Paleozoic, providing valuable insights into the long-term magmatic evolution of various passive margins, including the Indian passive margin. In the Yumai Complex, eastern Tethyan Himalaya, a pulse of Late Triassic alkaline volcanism (ca. 227–216 Ma) is evident. The Late Triassic volcanic rocks are mildly alkaline to tholeiitic basalts with minor ultrabasic rocks, similar in geochemistry to within-plate flood basalts. The TiO2 contents (1.46–3.38 wt%, mainly >2 wt%), (La/Yb)N values (4.05–7.50), εNd (t) values (+4.86 to +6.98), and results from partial-melt modeling suggest that the basalts likely originated from garnet peridotite. Elemental and Sr-Nd systematics of magmatic rocks emplaced during the Triassic indicate oceanic island basalt (OIB) components in the magma source, interpreted as enriched mantle components rather than crustal contamination products. Spatiotemporal and geochemical patterns of magmatism reveal that the bulk compositions of the basalts changed from enriched OIB-like to depleted mid-ocean-ridge basalt (MORB)–like compositions. This phenomenon likely resulted from the evolving nature of the rifting basin, changing from a nascent continental setting to a mature ocean basin. The Triassic magmatism in the Tethyan Himalaya can be attributed to remnant lithospheric instability arising from the prolonged rifting of eastern Gondwana, leading to the formation of a magmatically passive margin.

Paleostress evolution of the West Africa passive margin: New insights from calcite twinning paleopiezometry in the deeply buried syn-rift TOCA formation (Lower Congo basin)

Accurate characterization of hydrocarbon reservoirs requires a good understanding of the paleostress history of their host sedimentary basin. This study aims at reconstructing the paleoburial and paleostress history of the syn-rift Barremian TOCA Fm. in the Lower Congo basin (West African margin). Two oriented borehole cores drilled offshore Congo were investigated using stress inversion techniques applied to calcite mechanical twins to constrain paleostress orientations and magnitudes. The inversion of calcite twins was performed on a widespread early diagenetic cement (~129 to ~113 Ma) and revealed that the TOCA Fm. has undergone a complex polyphase stress history, including (1) extensional stress regimes with vertical σ1 and horizontal σ3 trending NE-SW and WNW-ESE (N100) associated with the rifting episode preceding the opening of the South Atlantic (130 to 112 Ma), and with mean differential stresses of ~47 MPa for (σ1-σ3) and ~ 20 MPa for (σ2-σ3). The early N100 extension is associated with the development of normal faults striking N-S that likely reactivated inherited basement structures. The direction of extension evolved during the Barremian into the main NE-SW extension marked by the dominant normal faults striking NW-SE. (2) Compressional and strike-slip stress regimes with horizontal σ1 oriented ~N-S possibly related to the far-field intraplate transmission of orogenic stresses generated at the distant Africa-Eurasia plate boundary at ~67–60 Ma, and with mean differential stresses of 40 MPa for (σ1-σ3) and 28 MPa for (σ2-σ3). (3) Compressional and strike-slip stress regimes with horizontal σ1 oriented ENE-WSW to ~E-W that we tentatively relate to the mid-Atlantic ridge push and prevailing since ~15 Ma onwards, associated with mean differential stresses of ~45 MPa for (σ1-σ3) and ~ 18 MPa for (σ2-σ3). Our results reveal that the TOCA Fm. recorded mainly far-field stress effects that could be related to interactions between the African plate and surrounding plates, and that divergent passive margins may experience a complex tectonic history including both extensional and compressional events.

Evolution of an oblique volcanic passive margin: The case of Nuussuaq in West Greenland

Most rifted margins involve a certain degree of obliquity. Oblique extension has been well-studied in a magma-poor continental rift setting. However, few studies have addressed the structure and evolution of oblique rifting in a magma-rich continental rift setting. In this study, we used remote sensing and field measurements combined with geophysical data in order to study the tectono-magmatic evolution of seaward-dipping basalt sequences, known also as seaward dipping reflectors (SDRs), along the western Nuussuaq oblique volcanic passive margin. We calculated the directions and dips of lavas within onshore SDRs based on remote sensing and field data and analyzed the offshore SDRs through seismic reflection profiles to obtain a precise 3D structure of the inner SDRs along this margin. Our results show that the development of the inner SDRs can be divided into two stages. During the first stage (the late Paleocene), the oblique extension was partitioned into strike-slip and dip-slip components, and the basalt sequences were mainly bounded by N-S-trending continentward-dipping faults. During the second stage (the early Eocene), a local stress reorientation occurred in the western Nuussuaq and the basalt sequences were mainly bounded by NE-SW-trending continentward-dipping faults. The obliquity of the margin originated from both the reactivation of the inherited Itilli Fault and the magma intrusion into the crust, which weakened the crust and produced a pressure-induced extension orthogonal to the margin.

Control of inherited structural fabric on the development and exhumation of passive margins – Insights from the Araçuaí Orogen (Brazil)

The Araçuaí Orogen, in eastern Brazil, was formed during the Neoproterozoic – Cambrian amalgamation of West Gondwana. During the Mesozoic – Cenozoic opening of the South Atlantic Ocean, and the associated divergent tectonics, the orogen developed as basement to the passive margin of South America and was progressively covered by thick offshore sedimentary basins, particularly the Espírito Santo, Mucuri, and Cumuruxatiba basins, in which hydrocarbon systems have been exploited. Our understanding of the Araçuaí Orogen's passive margin evolution, erosion, and sediment transfer to these basins ultimately depends on constraining the onshore exhumation in response to Mesozoic – Cenozoic events. Here, new and previously published data from apatite fission-track (AFT) analyses and inverse thermal history modelling of (Pre)Cambrian basement rocks from the Araçuaí Orogen resolve three discrete basement cooling and associated erosional exhumation episodes. In the Pre-Rift phase, Jurassic – Hauterivian erosion of the Araçuaí Orogen is most likely related to the adjoining intra-continental West Gondwana flexural subsidence, which increased hillslope and river erosion power. In the Rift and Transitional phases, Barremian – Albian accelerated phase of erosion is associated with the uplift of the Atlantic rift shoulders and the establishment of an oceanic base-level. In the Drift phase, reactivations in response to far-field stresses likely triggered a Late Cretaceous – Paleocene rapid erosion event. The rates at which these events unfolded vary spatially and are controlled by inherited structures. The Araçuaí Orogen experienced slower denudation rates in areas closer to the São Francisco Craton, which suggests that the tectonic reactivation and related surface uplift during the Mesozoic–Cenozoic is in first-order controlled by lithospheric rigidity. Furthermore, the structural framework of the Paramirim and Pirapora aulacogens and NE-oriented shear zones in the orogen’s southeast facilitated later reactivations. From the spatial pattern of denudation/exhumation of the Araçuaí Orogen during the Mesozoic – Cenozoic, we draw inferences on the tectonic development of the offshore basins regarding their hydrocarbon potentials.

The Tethyan and Tyrrhenian margin record of the Central Apennines: a guide with insights from stratigraphy, tectonics, and hydrogeology

This guide is a 5-day geotraverse across the Central Apennines, which expose the inherited Meso-Cenozoic sedimentary successions and tectonic architecture of the Apennine Tethyan passive margin. This structure was progressively involved into orogenic and post-orogenic tectonics, related to the Tyrrhenian back-arc dynamics. To show the different margin dynamics, we present: 1) sedimentologic and stratigraphic aspects, 2) relations with Neogene compressive and Quaternary extensional structures and 3) a hydrogeological case-study. The trip starts north of Rome, where Quaternary deposits at the transition from marine to continental deposition, including travertines, record the evolution of the Tyrrhenian passive margin. The excursion then moves to the Mesozoic platform margins of the Latium-Abruzzi and Apulia carbonate platforms, where perfectly preserved Cretaceous to Neogene successions occur. The Maiella mountain and Gran Sasso range testify for carbonate production changes, as recorded in facies associations and isotope geochemistry records, related to global climate shifts and regional tectonics. A focus on the hydrogeologic dynamics of the Gran Sasso aquifer is also offered in relation to the current climate change. This guide is the result of a workshop of GeoSed, the Italian Association for Sedimentary Geology, and it also aims at providing a scientific base for geo-touristic explorers.

Modeling Lithospheric Thickness Along the Conjugate South Atlantic Passive Margins Implies Asymmetric Rift Initiation

AbstractThe lithospheric architecture of passive margins is crucial for understanding the tectonic processes that caused the breakup of Gondwana. We highlight the evolution of the South Atlantic passive margins by a simple thermal lithosphere‐asthenosphere boundary (LAB) model based on onset and cessation of rifting, crustal thickness, and stretching factors. We simulate lithospheric thinning and select the LAB as the T = 1,330°C isotherm, which is calculated by 1D advection and diffusion. Stretching factors and margin geometry are adjusted to state‐of‐the‐art data sets, giving a thermal LAB model that is especially designed for the continental margins of the South Atlantic. Our LAB model shows distinct variations along the passive margins that are not imaged by global LAB models, indicating different rifting mechanisms. For example, we model up to 200 km deep lithosphere in the South American Santos Basin and shallow lithosphere less than 60 km in the Namibe Basin offshore Africa. These two conjugate basins reflect a strong asymmetry in LAB depth that resembles variations in margin width. In a Gondwana reconstruction, we discuss these patterns together with seismic velocity perturbations for the Central and Austral Segments of the margins. The shallow lithosphere in the Namibe Basin correlates with signatures of the Angola Dome, attributed to epeirogenic uplift in the Neogene, suggesting an additional component of post‐breakup lithospheric thinning.

Regional assessment of gravity‐driven deformation offshore Namibia (West Africa)—Styles, distribution and controlling factors

AbstractThis paper presents a semi‐quantitative analysis of gravity‐driven deformation along the Namibian margin using extensive 2D depth converted seismic data. The geometries, internal characters and distribution of gravity‐driven systems were investigated through regional and detailed seismic studies. The research shows that surficial slumps are typically ca. 50 m thick and are characterised by contorted seismic facies commonly occurring along the slopes of the margin. They commonly funnel and cluster within high relief areas such as canyons and pre‐existing landslide scars. These contrast with coherent slides that are up to 2 km thick which extend laterally along the margin for tens to hundreds of kilometres. Slides preferentially occur in the proximal part of the margin and are constrained within the main margin depocenters. Here, high sedimentation rates and loading promote the generation of distinct, weak, overpressured layers that favour initiation of sliding of relatively coherent sediment masses. This research also shows that one‐third of volume of the post‐rift sediments on the Namibian margin were affected by slides and slumps. This demonstrates that gravity‐driven deformation is a key geological process that can strongly modify the evolution of rifted passive margins.

Time-constrained multiphase brittle tectonic evolution of the onshore mid-Norwegian passive margin

AbstractThe mid-Norwegian passive margin is a multiphase rifted margin that developed since the Devonian. Its geometry is affected by the long-lived activity of the Møre-Trøndelag fault complex, an ENE-WSW–oriented regional tectonic structure. We propose a time-constrained evolutionary scheme for the brittle history of the mid-Norwegian passive margin. By means of remote-sensing lineament detection, field work, microstructural analysis, paleostress inversion, mineralogical characterization, and K-Ar dating of fault rocks, six tectonic events have been identified: (1) Paleozoic NE-SW compression forming WNW-ESE–striking thrust faults; (2) Paleozoic NW-SE transpression forming conjugate strike-slip faults; (3) Carboniferous protorifting forming NW-SE– and NE-SW–striking faults; (4) Late Triassic–Jurassic (ca. 202 and 177 Ma) E-W extension forming approximately N-S–striking epidote- and quartz-coated normal faults and widespread alteration; (5) renewed rifting in the Early Cretaceous (ca. 122 Ma) with a NW-SE extension direction; and (6) Late Cretaceous extensional pulses (ca. 71, 80, 86, 91 Ma ago) reactivating preexisting faults and crystallizing prehnite and zeolite. Our multidisciplinary and multiscalar study sheds light onto the structural evolution of the mid-Norwegian passive margin and confirms the active role of the Møre-Trøndelag fault complex during the rifting stages. Our 62 new radiometric K-Ar ages define discrete episodes of faulting along the margin. The proposed workflow may assist in the interpretation of the structural framework of the mid-Norwegian passive margin offshore domain and also help to better understand fault patterns of fractured passive margins elsewhere.

Low‐Angle Normal Faults on the NW Shelf of Australia: Implications for Late Paleozoic Rifting

AbstractLate Paleozoic rifting of the NW Shelf of Australia formed a wide basin that fundamentally controlled the Mesozoic continental rifting and passive margin development; however, structural style associated with this extensional process remains poorly constrained. Here, we integrate high‐resolution seismic data with well data from the proximal domain of the NW Shelf to show that the Mermaid fault system in the eastern Dampier Sub‐basin is a large‐scale (∼80 km long), low‐angle (5–20°) normal fault with up to 10 km offset formed during the Late Paleozoic rifting. In its northern and southern domains, the Mermaid fault has a planar geometry with characteristic extensional structures. In its central domain, seaward‐dipping, domino‐style normal faults in the upper crust extend downward into a highly reflective seismic zone that arches upward to form an elliptical dome. Growth strata in the hangingwall half‐graben and footwall basement reflections indicate that the Mermaid fault initiated as a high‐angle normal fault and was rotated by footwall exhumation during extension. Intrabasement deformation along and below the Mermaid fault is characterized by moderate‐ to high‐amplitude, semi‐continuous seismic reflectors that are distinct from transparent reflection character in the overlying basement unit. Comparison of the Mermaid fault system to well‐studied detachment faults in metamorphic core complex settings reveals striking similarities. We therefore suggest that the Mermaid fault developed as part of a nascent metamorphic core complex with a warm to hot footwall that enabled middle‐lower crustal flow during the Late Paleozoic continental rifting, likely induced by southward subduction of the Paleo‐Tethys Ocean.

Early Evolution of the Adelaide Superbasin

Continental rifts have a significant role in supercontinent breakup and the development of sedimentary basins. The Australian Adelaide Superbasin is one of the largest and best-preserved rift systems that initiated during the breakup of Rodinia, yet substantial challenges still hinder our understanding of its early evolution and place within the Rodinian supercontinent. In the past decade, our understanding of rift and passive margin development, mantle plumes and their role in tectonics, geodynamics of supercontinent breakup, and sequence stratigraphy in tectonic settings has advanced significantly. However, literature on the early evolution of the Adelaide Superbasin has not been updated to reflect these advancements. Using new detrital zircon age data for provenance, combined with existing literature, we examine the earliest tectonic evolution of the Adelaide Superbasin in the context of our modern understanding of rift system development. A new maximum depositional age of 893 ± 9 Ma from the lowermost stratigraphic unit provides a revised limit on the initiation of sedimentation and rifting within the basin. Our model suggests that the basin evolved through an initial pulse of extension exploiting pre-existing crustal weakness to form half-grabens. Tectonic quiescence and stable subsidence followed, with deposition of a sourceward-shifting facies tract. Emplacement and extrusion of the Willouran Large Igneous Province occurred at c. 830 Ma, initiating a new phase of rifting. This rift renewal led to widespread extension and subsidence with the deposition of the Curdimurka Subgroup, which constitutes the main cyclic rift sequence in the Adelaide Superbasin. Our model suggests that the Adelaide Superbasin formed through rift propagation to an apparent triple junction, rather than apical extension outward from this point. In addition, we provide evidence suggesting a late Mesoproterozoic zircon source to the east of the basin, and show that the lowermost stratigraphy of the Centralian Superbasin, which is thought to be deposited coevally, had different primary detrital sources.