Development Of Electrochemical Biosensors Research Articles

Development of label-free electrochemical OMP-DNA probe biosensor as a highly sensitive system to detect of citrus huanglongbing

The fabrication of the first label-free electrochemical DNA probe biosensor for highly sensitive detection of Candidatus Liberibacter asiaticus (CLas), as the causal agent of citrus huanglongbing disease, is conducted here. An OMP probe was designed based on the hybridization with its target-specific sequence in the outer membrane protein (OMP) gene of CLas. The characterization of the steps of biosensor fabrication and hybridization process between the immobilized OMP-DNA probe and the target ssDNA oligonucleotides (OMP-complementary and three mismatches OMP or OMP-mutation) was monitored using cyclic voltammetry and electrochemical impedance spectroscopy based on increasing or decreasing in the electron transfer in [Fe (CN)6]3−/4− on the modified gold electrode surface. The biosensor sensitivity indicated that the peak currents were linear over ranges from 20 to 100 nM for OMP-complementary with the detection limit of 0.026 nM (S/N = 3). The absence of any cross-interference with other biological DNA sequences confirmed a high selectivity of fabricated biosensor. Likewise, it showed good specificity in discriminating the mutation oligonucleotides from complementary target DNAs. The functional performance of optimized biosensor was achieved via the hybridization of OMP-DNA probe with extracted DNA from citrus plant infected with CLas. Therefore, fabricated biosensor indicates promise for sensitivity and early detection of citrus huanglongbing disease.

Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes.

Bisphenol A (BPA) has been classified as an endocrine-disrupting substance that may cause adverse effects on human health and the environment. The development of simple and sensitive electrochemical biosensors is crucial for the rapid and effective quantitative determination of BPA. This work presents a study on electrochemical sensors utilizing gold nanoparticle-modified multi-walled carbon nanotubes (CNT/AuNPs). Glassy carbon electrodes (GCEs) and screen-printed electrodes (SPEs) were conveniently modified and used for BPA detection. AuNPs were electrodeposited onto the CNT-modified electrodes using the galvanostatic method. The electrodes were properly modified and characterized by using Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance analysis (EIS). The electrochemical response of the sensors was studied using differential pulse voltammetry (DPV) and constant potential amperometry (CPA) for modified GCE and SPE electrodes, respectively, and the main analytical parameters were studied and optimized. Problems encountered with the use of GCEs, such as sensor degradation and high limit of detection (LOD), were overcome by using modified SPEs and a flow injection device for the measurements. Under this approach, an LOD as low as 5 nM (S/N = 3) was achieved and presented a linear range up to 20 μM. Finally, our investigation addressed interference, reproducibility, and reusability aspects, successfully identifying BPA in both spiked and authentic samples, including commercial and tap waters. These findings underscore the practical applicability of our method for accurate BPA detection in real-world scenarios. Notably, the integration of SPEs and a flow injection device facilitated simplified automation, offering an exceptionally efficient and reliable solution for precise BPA detection in water analysis laboratories.

L-Lactate Electrochemical Biosensor Based on an Integrated Supramolecular Architecture of Multiwalled Carbon Nanotubes Functionalized with Avidin and a Recombinant Biotinylated Lactate Oxidase.

L-Lactate is an important bioanalyte in the food industry, biotechnology, and human healthcare. In this work, we report the development of a new L-lactate electrochemical biosensor based on the use of multiwalled carbon nanotubes non-covalently functionalized with avidin (MWCNT-Av) deposited at glassy carbon electrodes (GCEs) as anchoring sites for the bioaffinity-based immobilization of a new recombinant biotinylated lactate oxidase (bLOx) produced in Escherichia coli through in vivo biotinylation. The specific binding of MWCNT-Av to bLOx was characterized by amperometry, surface plasmon resonance (SPR), and electrochemical impedance spectroscopy (EIS). The amperometric detection of L-lactate was performed at -0.100 V, with a linear range between 100 and 700 µM, a detection limit of 33 µM, and a quantification limit of 100 µM. The proposed biosensor (GCE/MWCNT-Av/bLOx) showed a reproducibility of 6.0% and it was successfully used for determining L-lactate in food and enriched serum samples.

Development of a selective electrochemical microsensor based on molecularly imprinted polydopamine/ZIF-67/laser-induced graphene for point-of-care determination of 3-nitrotyrosine

3-nitrotyrosine (3-NT) is a biomarker closely associated with the early diagnosis of oxidative stress-related disorders. The development of an accurate, cost-effective, point-of-care 3-NT sensor holds significant importance for self-monitoring and clinical treatment. In this study, a selective, sensitive, and portable molecularly imprinted electrochemical sensor was developed. ZIF-67 with strong adsorption capacity was facilely modified on an electrochemically active laser-induced graphene (LIG) substrate (formed ZIF-67/LIG). Subsequently, biocompatible dopamine was chosen as the functional monomer, and interference-free ʟ-tyrosine was used as the dummy template to create molecularly imprinted polydopamine (MIPDA) on the ZIF-67/LIG, endowing the sensor with selectivity. The morphologies, electrochemical properties, and detection performance of the sensor were comprehensively investigated using scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse voltammetry. To achieve the best performance, several parameters were optimized, including the number of polymerization cycles (15), elution time (60 min), incubation time (7 min), and pH of the buffer solution (6). The turnaround time for this sensor is 10 min. Benefiting from the alliance of MIPDA, ZIF-67, and LIG, the sensor exhibited excellent sensitivity with a detection limit of 6.71 nM, and distinguished selectivity against 11 interfering substances. To enable convenient clinical diagnosis, a customized electrochemical microsensor with MIPDA/ZIF-67/LIG was designed, showcasing excellent reliability and convenience in detecting biological samples without pretreatment. The proposed microsensor will not only facilitate clinical diagnosis and improve patient care, but also provide inspiration for the development of other portable and accurate electrochemical biosensors.

Visual self-powered platform for ultrasensitive heavy metal detection designed on graphdiyne/graphene heterojunction and DNAzyme-triggered DNA circuit strategy

Self-powered electrochemical biosensors based on enzyme biofuel cells (EBFC) are uniquely valuable in developing real-time and on-site detection of heavy metal ions. This work combines graphdiyne/graphene (GDY/GR) heterojunction with Deoxyribozyme (DNAzyme) trigger catalytic hairpin self-assembly (CHA) circuit. In addition, the smartphone is introduced to obtain the detection signals. The results show that the designed sensor platform can be used for single-tube ultrasensitive and visual lead ion detection with a wide linear range of 0.003–5000 nM and a low detection limit (LOD) of 0.005 nM. This design enriches the routine screening methods for heavy metal ions in food and environmental samples and introduces new idea for the development and application of self-powered electrochemical biosensors.

Electrochemical biosensors for pathogenic microorganisms detection based on recognition elements.

The worldwide spread of pathogenic microorganisms poses a significant risk to human health. Electrochemical biosensors have emerged as dependable analytical tools for the point-of-care detection of pathogens and can effectively compensate for the limitations of conventional techniques. Real-time analysis, high throughput, portability, and rapidity make them pioneering tools for on-site detection of pathogens. Herein, this work comprehensively reviews the recent advances in electrochemical biosensors for pathogen detection, focusing on those based on the classification of recognition elements, and summarizes their principles, current challenges, and prospects. This review was conducted by a systematic search of PubMed and Web of Science databases to obtain relevant literature and construct a basic framework. A total of 171 publications were included after online screening and data extraction to obtain information of the research advances in electrochemical biosensors for pathogen detection. According to the findings, the research of electrochemical biosensors in pathogen detection has been increasing yearly in the past 3years, which has a broad development prospect, but most of the biosensors have performance or economic limitations and are still in the primary stage. Therefore, significant research and funding are required to fuel the rapid development of electrochemical biosensors. The overview comprehensively evaluates the recent advances in different types of electrochemical biosensors utilized in pathogen detection, with a view to providing insights into future research directions in biosensors.

Porous Laser-Scribed Graphene Electrodes Modified with Zwitterionic Moieties: A Strategy for Antibiofouling and Low-Impedance Interfaces.

Laser-scribed graphene electrodes (LSGEs) are promising platforms for the development of electrochemical biosensors for point-of-care settings and continuous monitoring and wearable applications. However, the frequent occurrence of biofouling drastically reduces the sensitivity and selectivity of these devices, hampering their sensing performance. Herein, we describe a versatile, low-impedance, and robust antibiofouling interface based on sulfobetaine-zwitterionic moieties. The interface induces the formation of a hydration layer and exerts electrostatic repulsion, protecting the electrode surface from the nonspecific adsorption of various biofouling agents. We demonstrate through electrochemical and microscopy techniques that the modified electrode exhibits outstanding antifouling properties, preserving more than 90% of the original signal after 24 h of exposure to bovine serum albumin protein, HeLa cells, and Escherichia coli bacteria. The promising performance of this antifouling strategy suggests that it is a viable option for prolonging the lifetime of LSGEs-based sensors when operating on complex biological systems.

The development of electrochemical DNA biosensor based on woolen ball-shaped La3+/TiO2 nanostructure coating: Nanomolar detection of Vinorelbine

Although Vinorelbine (VOB) is a powerful anticancer medication, it inevitably has a number of adverse effects. Therefore, identifying this medication in biological samples is crucial for assessing both its effectiveness and negative effects. In this study, a new DNA biosensor was created to analyze VOB within biological samples. Moreover, the sensor has been created though the modification of a pencil graphite electrode (PEG) with polypyrrole (PP), a woolen ball-shaped La3+/TiO2 nanostructure (WB–S La3+/TiO2-NS) (enhancing the conductivity of electricity), along with ds-DNA (calf thymus) (ds-DNA/PP/WB-S La3+/TiO2-NS/PGE). Alterations in electrode signal has been then utilized to determine whether VOB is present. Under optimized condition, the differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques were adopted for electrochemical sensing of VOB. With a 0.37 nM detection limit, ds-DNA/PP/WB-S La3+/TiO2-NS/PGE demonstrated remarkable sensitivity for VOB at concentrations between 0.001 and 150.0 μM by DPV method. In addition, the calibration curve shows a linear range between 5.0 and 100.0 μM vanillin with a detection limit of about 0.76 μM by EIS method. Theoretical docking investigation was used to analyze the contacts among VOB and ds-DNA bases for future assessments, and the results supported the intercalation of VOB with guanine bases ds-DNA's intercalations. VOB was examined using the ds-DNA/PP/WB-S La3+/TiO2-NS/PGE method in actual samples.

Trends in Development of Aptamer-Based Biosensor Technology for Detection of Bacteria.

The contamination of food by bacterial pathogens represents a substantial hazard for human and animal health. Therefore, considerable effort is focused on the development of effective methods for monitoring food safety. A current trend in this field is the development of biosensors that can be used in remote food laboratories and even in farms to check food contamination prior to its delivery to consumers or its further processing in the food industry. Among receptors that can recognize proteins or lipopolysaccharides (LPS) on bacterial surfaces, aptamers play an important role. An aptamer consists of a single strand of DNA or RNA that folds into a 3D structure when placed in a solution, forming a binding site for the target. This chapter presents an overview of recent achievements in bacterial pathogen detection through the development of electrochemical, optical, and acoustic biosensors based on DNA aptamers. Thus far, these biosensors exhibit good sensitivity and selectivity, comparable with conventional methods currently used in food laboratories. However, these biosensors offer several advantages over conventional methods: they are of low cost, easier to handle, and respond more quickly. Biosensor technology is therefore an important tool for monitoring food safety.

Fluorescent and electrochemical detection of nuclease activity associated with Streptococcus pneumoniae using specific oligonucleotide probes.

Streptococcus pneumoniae (S. pneumoniae) represents a significant pathogenic threat, often responsible for community-acquired pneumonia with potentially life-threatening consequences if left untreated. This underscores the pressing clinical need for rapid and accurate detection of this harmful bacteria. In this study, we report the screening and discovery of a novel biomarker for S. pneumoniae detection. We used S. pneumoniae nucleases as biomarker and we have identified a specific oligonucleotide that works as substrate. This biomarker relies on a specific nuclease activity found on the bacterial membrane, forming the basis for the development of both fluorescence and electrochemical biosensors. We observed an exceptionally high sensitivity in the performance of the electrochemical biosensor, detecting as low as 102 CFU mL-1, whereas the fluorescence sensor demonstrated comparatively lower efficiency, with a detection limit of 106 CFU mL-1. Moreover, the specificity studies have demonstrated the biosensors' remarkable capacity to identify S. pneumoniae from other pathogenic bacteria. Significantly, both biosensors have demonstrated the ability to identify S. pneumoniae cultured from clinical samples, providing compelling evidence of the potential clinical utility of this innovative detection system.

Structure-Function Studies of Glucose Oxidase in the Presence of Carbon Nanotubes and Bio-Graphene for the Development of Electrochemical Glucose Biosensors.

In this work, we investigated the effect of multi-walled carbon nanotubes (MWCNTs) and bio-graphene (bG) on the structure and activity of glucose oxidase (GOx), as well as on the performance of the respective electrochemical glucose biosensors. Various spectroscopic techniques were applied to evaluate conformational changes in GOx molecules induced by the presence of MWCNTs and bG. The results showed that MWCNTs induced changes in the flavin adenine dinucleotide (FAD) prosthetic group of GOx, and the tryptophan residues were exposed to a more hydrophobic environment. Moreover, MWCNTs caused protein unfolding and conversion of α-helix to β-sheet structure, whereas bG did not affect the secondary and tertiary structure of GOx. The effect of the structural changes was mirrored by a decrease in the activity of GOx (7%) in the presence of MWCNTs, whereas the enzyme preserved its activity in the presence of bG. The beneficial properties of bG over MWCNTs on GOx activity were further supported by electrochemical data at two glucose biosensors based on GOx entrapped in chitosan gel in the presence of bG or MWCNTs. bG-based biosensors exhibited a 1.33-fold increased sensitivity and improved reproducibility for determining glucose over the sweat-relevant concentration range of glucose.

Catalytic MXCeO2 for enzyme based electrochemical biosensors: Fabrication, characterization and application towards a wearable sweat biosensor

Two-dimensional (2D) layered materials that integrate metallic conductivity, catalytic activity and the ability to stabilize biological receptors provide unique capabilities for designing electrochemical biosensors for large-scale detection and diagnostic applications. Herein, we report a multifunctional MXene-based 2D nanostructure decorated with enzyme mimetic cerium oxide nanoparticle (MXCeO2) as a novel platform and catalytic amplifier for electrochemical biosensors, specifically targeting the detection of oxidase enzyme substrates. We demonstrate enhanced catalytic efficiency of the MXCeO2 for the reduction of hydrogen peroxide (H2O2) and its ability to immobilize oxidase enzymes, such as glucose oxidase, lactate oxidase and xanthine oxidase. The designed biosensors exhibit high selectivity, stability, and sensitivity, achieving detection limits of 0.8 μM H2O2, 0.49 μM glucose, 3.6 μM lactate and 1.7 μM hypoxanthine, when the MXCeO2 and their respective enzymes were used. The MXCeO2 was successfully incorporated into a wearable fabric demonstrating high sensitivity for lactate measurements in sweat. The unique combination of MXenes with CeO2 offers excellent conductivity, catalytic efficiency and enhanced enzyme loading, demonstrating potential of the MXCeO2 as a catalytically active material to boost efficiency of oxidase enzyme reactions. This design can be used as a general platform for increasing the sensitivity of enzyme based biosensors and advance the development of electrochemical biosensors for a variety of applications.

Parallel Amperometric and Potentiometric Multianalyte Detection in a Microfluidic System

The adoption of microfluidic technologies in electrochemical biosensor development has enabled quantitative biomarker monitoring that use significantly lower volumes of reagents and samples, miniaturized electrodes, and inexpensive fabrication techniques, while presenting opportunities for multianalyte detection. We describe the fabrication of amperometric and potentiometric biosensors on a multichannel, platinum screen-printed electrode (SPE) and demonstrate their operation in parallel on a microfluidic multianalyte electrochemical sensor array (µMESA) platform.Working electrodes (WEs) of an SPE were were modified with either enzymes or ion selective membranes (ISMs) for amperometric or potentiometric measurements respectively. Oxidase enzymes were dissolved in an osmium (II) bis(2,2'-bipyridine)chloride-poly(vinylimidazole-allylamine) redox polymer and immobilized on four WEs. The use of this osmium-based electron transfer mediator has been previously reported to lower the oxidation potential of analytes and to improve overall sensor performance. The remaining four WEs were modified by electrodeposition of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), an intrinsically conductive polymer. Solid contact ISMs were prepared by combining ionophores, lipophilic ion exchangers, and a fluorosilicone polymer, and drop casting the mixtures on PEDOT:PSS-coated WEs. Plasticizer-free ISMs improve sensor lifetime by lowering the glass transition temperature and eliminating leaching of plasticizers from the ISM. By utilizing these strategies, we fabricated amperometric sensors for glucose and lactate, and potentiometric sensors for K+ and Ca2+ ions. Glucose is a primary substrate for energy metabolism while lactate is a major metabolite and signaling molecule. K+ ions maintain cell membrane physiology and homeostasis whereas Ca2+ ions serve as messengers during muscle activity and neurotransmission.Sensor characteristics like sensitivity, selectivity, linear range, and operational longevity for each biosensor were assessed using chronoamperometry or chronopotentiometry techniques on a potentiostat/potentiometer instrument. The results indicate that the sensor fabrication strategies described, in combination with our µMESA platform, can be used to measure changes in metabolite concentrations under laminar flow. Ultimately, this versatile technology may provide novel insights into complex physiological and pathological processes in biological systems.

Development of an Integrated Multi-Method Electrochemical Biosensor for Rapid-on-Site Detection and Quantification of Cyanotoxins

The accumulation of Cyanotoxins (CTXs) in water reservoirs is an emerging global concern. Exposure to microcystin-LR (MC-LR), among the most common CTXs, is associated with hepatotoxicity and carcinogenesis and leads to both acute and chronic damages. Stringent regulation has recently been imposed by the World Health Organization, limiting the allowed MC-LR concentration in drinking water to <1 μg/L. Current methods for MC-LR detection require expensive equipment, trained personnel, and labor-intensive preparation. Therefore, there is an urgent need for an affordable, on-site diagnostic tool providing a rapid quantitative determination of MC-LR in various water types. In this study, we have developed an electrochemical (EC) biosensor that comprised of a miniaturized and multiplexed microchips, functionalized with anti-MC-LR antibodies, and MC-LR detection is based on the transduction of bimolecular binding into an electrochemical signal. The transduction method applied is based on the comparison of two (2) electrochemical techniques: a label-free Electrochemical Impedance Spectroscopy (EIS) a labeled Electrochemical Immunoassay (ECI) detection of MC-LR in <10 min. The former, the EIS-based detection method, demonstrated the feasibility of detecting ultra-low (3 ppt or ng/L) MC-LR concentrations, and preliminary results also showed that the biochip demonstrated its use in rapid quantitative detection of microcystins in raw cyanobacterial cultures. However, the latter, ECI-based detection method showed a detection limit of 3µg/L (3ppb) of purified MC-LR concentrations, which is an order of magnitude less sensitive than the EIS-based detection method. These LODs obtained from the two methods are superior to currently employed solid-phase immunoassays and other analytical methods. Based on our findings, we anticipate that in the near future electrochemical biosensors would be an essential tool in water monitoring and environmental diagnostics. Figure 1

Faradaic Impedimetric Immunosensor for Label-Free Point-of-Care Detection of COVID-19 Antibodies Using Gold-Interdigitated Electrode Array.

Label-free electrochemical biosensors have many desirable characteristics in terms of miniaturization, scalability, digitization, and other attributes associated with point-of-care (POC) applications. In the era of COVID-19 and pandemic preparedness, further development of such biosensors will be immensely beneficial for rapid testing and disease management. Label-free electrochemical biosensors often employ [Fe(CN)6]-3/4 redox probes to detect low-concentration target analytes as they dramatically enhance sensitivity. However, such Faradaic-based sensors are reported to experience baseline signal drift, which compromises the performance of these devices. Here, we describe the use of a mecaptohexanoic (MHA) self-assembled monolayer (SAM) modified Au-interdigitated electrode arrays (IDA) to investigate the origin of the baseline signal drift, developed a protocol to resolve the issue, and presented insights into the underlying mechanism on the working of label-free electrochemical biosensors. Using this protocol, we demonstrate the application of MHA SAM-modified Au-IDA for POC analysis of human serum samples. We describe the use of a label-free electrochemical biosensor based on covalently conjugated SARS-CoV-2 spike protein for POC detection of COVID-19 antibodies. The test requires a short incubation time (10 min), and has a sensitivity of 35.4/decade (35.4%/10 ng mL-1) and LOD of 21 ng/mL. Negligible cross reactivity to seasonal human coronavirus or other endogenous antibodies was observed. Our studies also show that Faradaic biosensors are ~17 times more sensitive than non-Faradaic biosensors. We believe the work presented here contributes to the fundamental understanding of the underlying mechanisms of baseline signal drift and will be applicable to future development of electrochemical biosensors for POC applications.

Functionalities of electrochemical fluoroquinolone sensors and biosensors.

Fluoroquinolones (FQs) are a class of broad-spectrum antimicrobial agents that are used to treat variety of infectious diseases. This class of antibiotics was being used for patients exhibiting early symptoms of a human respiratory disease known as the COVID-19 virus. As a result, this outbreak causes an increase in drug-resistant strains and environmental pollution, both of which pose serious threats to biota and human health. Thus, to ensure public health and prevent antimicrobial resistance, it is crucial to develop effective detection methods for FQs determination in water bodies even at trace levels. Due to their characteristics like specificity, selectivity, sensitivity, and low detection limits, electrochemical biosensors are promising future platforms for quick and on-site monitoring of FQs residues in a variety of samples when compared to conventional detection techniques. Despite their excellent properties, biosensor stability continues to be a problem even today. However, the integration of nanomaterials (NMs) could improve biocompatibility, stability, sensitivity, and speed of response in biosensors. This review concentrated on recent developments and contemporary methods in FQs biosensors. Furthermore, a variety of modification materials on the electrode surface are discussed. We also pay more attention to the practical applications of electrochemical biosensors for FQs detection. In addition, the existing challenges, outlook, and promising future perspectives in this field have been proposed. We hope that this review can serve as a bedrock for future researchers and provide new ideas for the development of electrochemical biosensors for antibiotics detection in the future.

A new strategy to build electrochemical enzymatic biosensors using a nanohybrid material based on carbon nanotubes and a rationally designed schiff base containing boronic acid

We report a nanohybrid material obtained by non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with the new ligand (((1E,1′E)-(naphthalene-2,3-diylbis(azaneylylidene))bis(methaneylylidenedene)) bis(4-hydroxy-3,1-phenylene))diboronic acid (SB-dBA), rationally designed to mimic some recognition properties of biomolecules like concanavalin A, for the development of electrochemical biosensors based on the use of glycobiomolecules as biorecognition element. We present, as a proof-of-concept, a hydrogen peroxide biosensor obtained by anchoring horseradish peroxidase (HRP) at a glassy carbon electrode (GCE) modified with the nanohybrid prepared by sonication of 2.0 mg mL−1 MWCNTs and 0.50 mg mL−1 SB-dBA in N,N-dimethyl formamide (DMF) for 30 min. The hydrogen peroxide biosensing was performed at −0.050 V in the presence of 5.0 × 10−4 M hydroquinone. The analytical characteristics of the resulting biosensor are the following: linear range between 0.175 μM and 6.12 μM, detection limit of 58 nM, and reproducibility of 2.0 % using the same nanohybrid (6 biosensors), and 9.0 % using three different nanohybrids. The sensor was successfully used to quantify hydrogen peroxide in enriched milk and human blood serum samples and in a commercial disinfector.

A concise overview of advancements in ultrasensitive biosensor development

Electrochemical biosensing has evolved as a diverse and potent method for detecting and analyzing biological entities ranging from tiny molecules to large macromolecules. Electrochemical biosensors are a desirable option in a variety of industries, including healthcare, environmental monitoring, and food safety, due to significant advancements in sensitivity, selectivity, and portability brought about by the integration of electrochemical techniques with nanomaterials, bio-recognition components, and microfluidics. In this review, we discussed the realm of electrochemical sensors, investigating and contrasting the diverse strategies that have been harnessed to push the boundaries of the limit of detection and achieve miniaturization. Furthermore, we assessed distinct electrochemical sensing methods employed in detection such as potentiometers, amperometers, conductometers, colorimeters, transistors, and electrical impedance spectroscopy to gauge their performance in various contexts. This article offers a panoramic view of strategies aimed at augmenting the limit of detection (LOD) of electrochemical sensors. The role of nanomaterials in shaping the capabilities of these sensors is examined in detail, accompanied by insights into the chemical modifications that enhance their functionality. Furthermore, our work not only offers a comprehensive strategic framework but also delineates the advanced methodologies employed in the development of electrochemical biosensors. This equips researchers with the knowledge required to develop more accurate and efficient detection technologies.

Recent Progress in Transition Metal Dichalcogenides for Electrochemical Biomolecular Detection.

Advances in the field of nanobiotechnology are largely due to discoveries in the field of materials. Recent developments in the field of electrochemical biosensors based on transition metal nanomaterials as transducer elements have been beneficial as they possess various functionalities that increase surface area and provide well-defined active sites to accommodate elements for rapid detection of biomolecules. In recent years, transition metal dichalcogenides (TMDs) have become the focus of interest in various applications due to their considerable physical, chemical, electronic, and optical properties. It is worth noting that their unique properties can be modulated by defect engineering and morphology control. The resulting multifunctional TMD surfaces have been explored as potential capture probes for the rapid and selective detection of biomolecules. In this review, our primary focus is to delve into the synthesis, properties, design, and development of electrochemical biosensors that are based on transition metal dichalcogenides (TMDs) for the detection of biomolecules. We aim to explore the potential of TMD-based electrochemical biosensors, identify the challenges that need to be overcome, and highlight the opportunities for further future development.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications.

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.