Development Of Bioactive Materials Research Articles

Pulpotomy: An alternative treatment modality to conventional root canal treatment

Vital pulp therapy is considered a successful treatment modality in primary and immature permanent teeth. The development of bioactive material has led to vital pulp therapy and pulpotomy treatment becoming a popular treatment modality in permanent teeth. This literature review investigates pulpotomy procedures on permanent teeth as a viable option, as opposed to conventional root canal treatment, as presented in the case report included.Aim The aim of this study is to evaluate literature on the reported success of pulpotomy treatment in mature permanent teeth. For this reason, the study specifically reviewed literature detailing the use of pulpotomies including the materials required for the procedure.MethodThe literature review is focused on studies using MTA and bioactive alternatives as pulpotomy material. An electronic search was done on EBSCOhost to source 58 articles published from 1979 to 2022. Results Literature investigated reports that pulpotomy treatment with bioactive materials shows promising results and therefore the possibility exists of it being a suitable treatment option or alternative to conventional root canal treatment.

Activating Endogenous Neurogenesis for Spinal Cord Injury Repair: Recent Advances and Future Prospects.

After spinal cord injury (SCI), endogenous neural stem cells are activated and migrate to the injury site where they differentiate into astrocytes, but they rarely differentiate into neurons. It is difficult for brain-derived information to be transmitted through the injury site after SCI because of the lack of neurons that can relay neural information through the injury site, and the functional recovery of adult mammals is difficult to achieve. The development of bioactive materials, tissue engineering, stem cell therapy, and physiotherapy has provided new strategies for the treatment of SCI and shown broad application prospects, such as promoting endogenous neurogenesis after SCI. In this review, we focus on novel approaches including tissue engineering, stem cell technology, and physiotherapy to promote endogenous neurogenesis and their therapeutic effects on SCI. Moreover, we explore the mechanisms and challenges of endogenous neurogenesis for the repair of SCI.

Realizing Both Antibacterial Activity and Cytocompatibility in Silicocarnotite Bioceramic via Germanium Incorporation.

The treatment of infective or potentially infectious bone defects is a critical problem in the orthopedic clinic. Since bacterial activity and cytocompatibility are always contrary factors, it is hard to have them both in one material. The development of bioactive materials with a good bacterial character and without sacrificing biocompatibility and osteogenic activity, is an interesting and valuable research topic. In the present work, the antimicrobial characteristic of germanium, GeO2 was used to enhance the antibacterial properties of silicocarnotite (Ca5(PO4)2SiO4, CPS). In addition, its cytocompatibility was also investigated. The results demonstrated that Ge-CPS can effectively inhibit the proliferation of both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and it showed no cytotoxicity to rat bone marrow-derived mesenchymal stem cells (rBMSCs). In addition, as the bioceramic degraded, a sustainable release of germanium could be achieved, ensuring long-term antibacterial activity. The results indicated that Ge-CPS has excellent antibacterial activity compared with pure CPS, while no obvious cytotoxicity was observed, which could make it a promising candidate for the bone repair of infected bone defects.

Engineering elastic bioactive composite hydrogels for promoting osteogenic differentiation of embryonic mesenchymal stem cells.

The development of bioactive materials with good mechanical properties and promotion of stem cell osteogenic differentiation has important application prospects in bone tissue engineering. In this paper, we designed a novel organic‒inorganic composite hydrogel (FPIGP@BGN-Sr) utilizing diacrylated F127 (DA-PF127), β-glycerophosphate-modified polyitaconate (PIGP) and strontium-doped bioactive glass nanoparticles (BGN-Sr) through free radical polymerization and coordination interactions and then evaluated its promoting effect on the osteogenic differentiation of mouse embryonic mesenchymal stem cells in detail. The results showed that the FPIGP@BGN-Sr hydrogel exhibited a controlled storage modulus by changing the amount of BGN-Sr. Notably, the FPIGP@BGN-Sr hydrogel possessed excellent elastic ability with a compressive strain of up to 98.6% and negligible change in mechanical properties after 10 cycles of compression. In addition, the FPIGP@BGN-Sr hydrogel had good cytocompatibility, maintained the activity and proliferation of mouse embryonic mesenchymal stem cells (C3H10T1/2), and effectively enhanced the activity of alkaline phosphatase, osteogenic gene expression and biomineralization ability of the cells. In conclusion, the excellent mechanical properties and osteogenic biological activity of the FPIGP@BGN-Sr hydrogel make it a promising organic‒inorganic composite bioactive material for stem cell-based bone regeneration.

Hybrid Bilayer PLA/Chitosan Nanofibrous Scaffolds Doped with ZnO, Fe3O4, and Au Nanoparticles with Bioactive Properties for Skin Tissue Engineering.

Burns affect almost half a million of Americans annually. In the case of full-thickness skin injuries, treatment requires a transplant. The development of bioactive materials that promote damaged tissue regeneration constitutes a great alternative to autografts. For this reason, special attention is focused on three-dimensional scaffolds that are non-toxic to skin cells and can mimic the extracellular matrix, which is mainly composed of nanofibrous proteins. Electrospinning, which enables the preparation of nanofibers, is a powerful tool in the field of biomaterials. In this work, novel hybrid poly (lactic acid)/chitosan biomaterials functionalized with three types of nanoparticles (NPs) were successfully developed. ZnO, Fe3O4, and Au NPs were investigated over their morphology by TEM method. The top layer was obtained from PLA nanofibers, while the bottom layer was prepared from acylated chitosan. The layers were studied over their morphology by the SEM method and their chemical structure by FT-IR. To verify their potential in burn wound treatment, the scaffolds’ susceptibility to biodegradation as well as moisture permeability were calculated. Also, biomaterials conductivity was determined in terms of electrostimulation. Finally, cytotoxicity tests were carried out by XTT assay and morphology analysis using both fibroblasts cell line and primary cells. The hybrid nanofibrous scaffolds displayed a great potential in tissue engineering.

Development of osteopromotive poly (octamethylene citrate glycerophosphate) for enhanced bone regeneration

The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, β-glycerophosphate disodium (β-GP-Na) and glycerophosphate calcium (GP-Ca), incorporated through a simple and convenient one-pot condensation reaction, which might address the above challenge in the search of suitable orthopedic biomaterials. Tensile strength of the resultant poly (octamethylene citrate glycerophosphate), POC-βGP-Na and POC-GP-Ca, was as high as 28.2 ± 2.44 MPa and 22.76 ± 1.06 MPa, respectively. The initial modulus ranged from 5.28 ± 0.56 MPa to 256.44 ± 22.88 MPa. The mechanical properties and degradation rate of POC-GP could be controlled by varying the type of salts, and the feeding ratio of salts introduced. Particularly, POC-GP-Ca demonstrated better cytocompatibility and the corresponding composite POC-GP-Ca/hydroxyapatite (HA) also elicited improved osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro, as compared to POC-βGP-Na/HA and POC/HA. The superior in-vivo performance of POC-GP-Ca/HA microparticle scaffolds in promoting bone regeneration over POC-βGP-Na/HA and POC/HA was further confirmed in a rabbit femoral condyle defect model. Taken together, the tunability of mechanical properties and degradation rates, together with the osteopromotive nature of POC-GP polymers make these materials, especially POC-GP-Ca well suited for bone tissue engineering applications. Statement of SignificanceThe design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, β-glycerophosphate disodium (β-GPNa) and glycerophosphate calcium (GPCa), incorporated through a simple and convenient one-pot condensation reaction. The resultant POC-GP polymers showed significantly improved mechanical property and tunable degradation rate. Within the formulation investigated, POC-GPCa/HA composite further demonstrated better bioactivity in favoring osteogenic differentiation of hMSCs in vitro and promoted bone regeneration in rabbit femoral condyle defects. The development of POC-GP expands the repertoire of the well-recognized citrate-based biomaterials to meet the ever-increasing needs for functional biomaterials in tissue engineering and other biomedical applications.

Effect of an organotin catalyst on the physicochemical properties and biocompatibility of castor oil-based polyurethane/cellulose composites

Abstract

Characterization study of industrial waste glass as starting material in development of bioactive materials

In present study, an industrial waste glass was characterized and the potential to assess as starting material in development of bioactive materials was investigated. A waste glass collected from the two different glass industry was grounded to fine powder. The samples were characterized using X-ray fluorescence (XRF), pycnometer and inductively couple plasma (ICP). The XRF result indicates both waste glass (WG1 and WG2) are the glass made based SLS glass composition and the density values were in the range of commercial SLS glass. Results from ICP showed both waste glass has contains of heavy metal trace elements that exceeds the allowable concentration level as per standard ASTM F1538-03. Obviously from this study, these twotypes of waste glass were not suitable for use as starting material as no compromise against the toxic elements are allowed for use in the human body. Keywords : waste glass; soda lime silica glass; biomaterials.

Development of bioactive materials based on poly-gamma-glutamic acid

Development of bioactive materials based on poly-gamma-glutamic acid

Membranes for Periodontal Regeneration--A Materials Perspective.

Periodontitis is a chronic inflammatory disorder affecting nearly 50% of adults in the United States. If left untreated, it can lead to the destruction of both soft and mineralized tissues that constitute the periodontium. Clinical management, including but not limited to flap debridement and/or curettage, as well as regenerative-based strategies with periodontal membranes associated or not with grafting materials, has been used with distinct levels of success. Unquestionably, no single implantable biomaterial can consistently guide the coordinated growth and development of multiple tissue types, especially in very large periodontal defects. With the global aging population, it is extremely important to find novel biomaterials, particularly bioactive membranes and/or scaffolds, for guided tissue (GTR) and bone regeneration (GBR) to aid in the reestablishment of the health and function of distinct periodontal tissues. This chapter offers an update on the evolution of biomaterials (i.e. membranes and bioactive scaffolds) as well as material-based strategies applied in periodontal regeneration. The authors start by providing a brief summary of the histological characteristics and functions of the periodontium and its main pathological condition, namely periodontitis. Next, a review of commercially available GTR/GBR membranes is given, followed by a critical appraisal of the most recent advances in the development of bioactive materials that enhance the chance for clinical success of periodontal tissue regeneration.

Improved cell activity on biodegradable photopolymer scaffolds using titanate nanotube coatings

The development of bioactive materials is in the premise of tissue engineering. For several years, surface functionalization of scaffolds has been one of the most promising approaches to stimulate cellular activity and finally improve implant success. Herein, we describe the development of a bioactive composite scaffold composed of a biodegradable photopolymer scaffold and titanate nanotubes (TNTs). The biodegradable photopolymer scaffolds were fabricated by applying mask-projection excimer laser photocuring at 308nm. TNTs were synthesized and then spin-coated on the porous scaffolds. Upon culturing fibroblast cells on scaffolds, we found that nanotubes coating affects cell viability and proliferation demonstrating that TNT coatings enhance cell growth on the scaffolds by further improving their surface topography.

Scaffolds to Control Inflammation and Facilitate Dental Pulp Regeneration

In dentistry, the maintenance of a vital dental pulp is of paramount importance because teeth devitalized by root canal treatment may become more brittle and prone to structural failure over time. Advanced carious lesions can irreversibly damage the dental pulp by propagating a sustained inflammatory response throughout the tissue. Although the inflammatory response initially drives tissue repair, sustained inflammation has an enormously destructive effect on the vital pulp, eventually leading to total necrosis of the tissue and necessitating its removal. The implications of tooth devitalization have driven significant interest in the development of bioactive materials that facilitate the regeneration of damaged pulp tissues by harnessing the capacity of the dental pulp for self-repair. In considering the process by which pulpitis drives tissue destruction, it is clear that an important step in supporting the regeneration of pulpal tissues is the attenuation of inflammation. Macrophages, key mediators of the immune response, may play a critical role in the resolution of pulpitis because of their ability to switch to a proresolution phenotype. This process can be driven by the resolvins, a family of molecules derived from fatty acids that show great promise as therapeutic agents. In this review, we outline the importance of preserving the capacity of the dental pulp to self-repair through the rapid attenuation of inflammation. Potential treatment modalities, such as shifting macrophages to a proresolving phenotype with resolvins are described, and a range of materials known to support the regeneration of dental pulp are presented.

Multifunctional magnetic mesoporous bioactive glass scaffolds with a hierarchical pore structure

Hyperthermia and local drug delivery have been proposed as potential therapeutic approaches for bone defects resulting from malignant bone tumors. The development of bioactive materials with magnetic and drug delivery properties may potentially meet this target. The aim of this study was to develop a multifunctional mesoporous bioactive glass (MBG) scaffold system for both hyperthermic and local drug delivery applications. To this end iron (Fe)-containing MBG (Fe-MBG) scaffolds with a hierarchical large pores structure (300–500 μm) and fingerprint-like mesopores (4.5 nm) have been prepared. The effects of Fe on the mesopore structure and physiochemical, magnetic, drug delivery and biological properties of MBG scaffolds have been systematically investigated. The results show that the morphology of the mesopores varied from straight channels to curved fingerprint-like channels after incorporation of Fe into MBG scaffolds. The magnetism of MBG scaffolds can be tailored by controlling the Fe content. Furthermore, the incorporation of Fe into mesoporous MBG glass scaffolds enhanced the mitochondrial activity and the expression of bone-related genes (ALP and OCN) in human bone marrow mesenchymal stem cells (BMSC) attached to the scaffolds. The Fe-MBG scaffolds obtained also possessed high specific surface areas and demonstrated sustained drug delivery. Thus Fe-MBG scaffolds are magnetic, degradable and bioactive. The multifunctionality of Fe-MBG scaffolds suggests that there is great potential for their use in the treatment and regeneration of large-bone defects caused by malignant bone tumors through a combination of hyperthermia, local drug delivery and osteoconductivity.

Molecularly imprinted nanoparticles with recognition properties towards a laminin H–Tyr–Ile–Gly–Ser–Arg–OH sequence for tissue engineering applications

Nanotechnology is an emerging field that promises to revolutionize medicine and is increasingly used in tissue engineering applications. Our research group proposed for the first time molecular imprinting as a new nanotechnology for the creation of advanced synthetic support structures for cell adhesion and proliferation. The aim of this work was the synthesis and characterization of molecularly imprinted polymers with recognition properties towards a laminin peptide sequence and their application as functionalization structures in the development of bioactive materials. Nanoparticles with an average diameter of 200 nm were synthesized by precipitation polymerization of methacrylic acid in the presence of the template molecule and trimethylpropane trimethacrylate as the cross-linking agent. The imprinted nanoparticles showed good performance in terms of recognition capacity and selectivity. The cytotoxicity tests showed normal vitality of C2C12 myoblasts cultured in the medium that was put in contact with the imprinted polymers. After the deposition on the polymeric film surface, the imprinted particles maintained their specific recognition and rebinding behaviour, showing an even higher quantitative binding than free nanoparticles. Preliminary in vitro cell culture tests demonstrated the ability of functionalized materials to promote cell adhesion, proliferation and differentiation, suggesting that molecular imprinting can be used as an innovative functionalization technique.

Morphological features of ovine embryonic lung fibroblasts cultured on different bioactive scaffolds

Tissue regeneration with autologous cell transplantation is one of the most important goals in clinical research. In this field, the development of bioactive materials that provide microenvironments for cell-matrix interactions mimicking biological conditions is required. In recent years, many synthetic materials have been developed as scaffolds and many procedures for the surface modification of these materials have been applied using biological molecules. In this study, we analyzed the morphology and the molecule production by ovine embryonic lung fibroblasts cultured on three different sponge-like matrices based on poly(L-lactic acid) (PLLA): agarose/PLLA, crosslinked and uncrosslinked gelatin/PLLA. The matrices were produced by using an emulsion freeze-drying method leading to the formation of sponge-like materials with high porosity and with interconnection between the pores. In vitro MTT test demonstrated that transplanted cells were viable and metabolically active. Morphological analysis revealed that fibroblasts adhered to and penetrated the polymeric structures. Moreover, all the different matrices supported fibroblast production of proteoglycans, glycoproteins, and matrix molecules such as elastin, collagen I, and fibronectin. These data suggest that the tested bioactive scaffolds may support the growth and extracellular matrix molecule production of fibroblasts allowing in vitro connective tissue regeneration.

Bioactive materials for tissue engineering, regeneration and repair

Tissue engineering is an interdisciplinary field which applies the principles of engineering and the life sciences to the design, construction, modification, growth and maintenance of living tissues [1, 2]. One of two approaches can be taken: (1) in vitro construction of bioartificial tissues from cells seeded onto a resorbable scaffold or (2) in vivo modification of cell growth and function to stimulate tissue regeneration [2, 3]. This concept represents a shift in emphasis from replacement to regeneration of diseased or damaged tissues, in which the development of bioactive materials has played a significant role. This paper will begin with an overview of the use of biomaterials as implants and their limitations, leading to the reasons for the dramatic shift in focus regarding the approach to repairing damaged tissues. The majority of the paper will discuss the ways in which biomaterials can be developed to implement the concept of tissue engineering. Finally, the implications of these developments for future treatment of damaged or diseased tissues will be considered.