Bacterial Biofilm Development Research Articles

Potential of silver nanoparticles synthesized from Justicia adhatoda metabolites for inhibiting biofilm on urinary catheters

In the present study, we investigated the anti-biofilm effect of urinary catheters fabricated with biogenic nanoparticles synthesized from metabolites of Justicia adhatoda under in vitro conditions against human pathogenic bacteria. Silver nanoparticles were synthesized in the reaction mixture composed of 2 % w/v of 0.1 M of precursor (silver nitrate) and 0.2 g of the metabolites obtained from ethanolic extract of Justicia adhatoda. Characterization of the nanoparticles was done by UV visible spectroscopy, fourier infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X ray diffraction (XRD) to confirm the structural and functional properties. Primary conformation of nanoparticles synthesis by UV visible spectroscopy revealed the notable absorption spectra at 425 nm with a wavelength shift around 450 nm, likely due to surface plasmon resonance excitation. SEM analysis showed spherical, monodisperse, nano scale particles with a size range of 50–60 nm. Crystaline phase of the synthesized nanoparticles was confirmed by x ray diffraction studies which showed the distinct peaks at (2θ) 27.90, 32.20, 46.30, 54.40, and 67.40, corresponding to (111), (200), (220), (222), and (311) planes of nano scale silver. The biocompatibility of these nanoparticles was assessed through zebrafish embryonic toxicity study which showed more than 90 % of embryos were alive and healthy. No marked changes on the blood cells also confirmed best hemocompatibility of the nanoparticles. Synthesized nanoparticles thus obtained were fabricated on the urinary catheter and the fabrication was confirmed by FTIR and SEM analysis. Notable changes in the absorption peaks, uniform coating and embedding of silver nanoparticles studied by FTIR and SEM analysis confirmed the fabrication of silver nanoparticles. The coated catheters demonstrated significant antibacterial activity against pathogenic bacterial strains, including E. coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853. Anti-biofilm studies, conducted using a modified microtiter plate crystal violet assay, revealed effective inhibition of both bacterial adhesion and biofilm development. 85 % of biofilm inhibition was recorded against both the tested strains. The coating method presented in this study shows promise for enhancing infection resistance in commonly used medical devices like urinary catheters, thus addressing device-associated infections.

Visualized and pH-responsive hydrogel antibacterial coating for ventilator-associated pneumonia

Ventilator-associated pneumonia (VAP) is a common healthcare-acquired infection often arising during artificial ventilation using endotracheal intubation (ETT), which offers a platform for bacterial colonization and biofilm development. In particular, the effects of prolonged COVID-19 on the respiratory system. Herein, we developed an antimicrobial coating (FK-MEM@CMCO-CS) capable of visualizing pH changes based on bacterial infection and releasing meropenem (MEM) and FK13-a1 in a controlled manner. Using a simple dip-coating process with controlled loading, chitosan was cross-linked with sodium carboxymethyl cellulose oxidation (CMCO) and coated onto PVC-based ETT to form a hydrogel coating. Subsequently, the coated segments were immersed in an indicator solution containing bromothymol blue (BTB), MEM, and FK13-a1 to fabricate the FK-MEM@CMCO-CS coating. In vitro studies have shown that MEM and FK13-a1 can be released from coatings in a pH-responsive manner. Moreover, anti-biofilm and antibacterial adhesion results showed that FK-MEM@CMCO-CS coating significantly inhibited biofilm formation and prevented their colonization of the coating surface. In the VAP rat model, the coating inhibited bacterial growth, reduced lung inflammation, and had good biocompatibility. The coating can be applied to the entire ETT and has the potential for industrial production.

Cyclamen libanoticum is a Novel Bioresource for Green Silver Nanoparticles with Antibacterial and Antioxidant Capabilities

Background: It has become essential to look into alternatives that effectively stop bacterial infections due to the exponential rise in antibiotic resistance. The field of nanotechnology has made significant strides in development by surmounting obstacles that have impeded success and advancement in other fields. Nanoparticles (NPs) are the key component in the burgeoning field of nanotechnology. Objective: Cyclamen libanoticum leaf extract (CLE) was used as a reducing and capping agent, with silver nitrate (AgNO3) solution as a precursor for synthesizing silver nanoparticles (CLEAgNPs). This study aimed to generate green silver nanoparticles (AgNPs) and assess their antioxidant and antibacterial capacities. Methods: CLE-AgNPs were characterized utilizing UV–vis spectrometry, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). Using the radical scavenging assay 2,2-diphenyl-1-picrylhydrazyl (DPPH), the antioxidant activity of CLEAgNPs was evaluated. Several assays were employed to examine the antibacterial effect of CLE-AgNPs against various gram-positive and negative bacteria. Results: Upon analysis, the synthesis revealed 17 nm face-centered cubic CLE-AgNPs (λmax= 431 nm). CLE-AgNPs manifested noticeable antioxidant activity and prominent inhibitory effects on the tested bacteria. The minimum inhibitory concentration (MIC) of the CLE-AgNPs was 31.25 μg/mL for the eight bacterial species. Besides, the results revealed that CLE-AgNPs effectively suppressed the development of bacterial biofilms and could eradicate them. Conclusion: The present investigation introduced Cyclamen libanoticum as a novel bioresource into green chemistry to produce AgNPs with antibacterial and antioxidant capabilities.

Bacterial Histidine Kinase and the Development of Its Inhibitors in the 21st Century.

Bacterial histidine kinase (BHK) is a constituent of the two-component signaling (TCS) pathway, which is responsible for the regulation of a number of processes connected to bacterial pathogenicity, virulence, biofilm development, antibiotic resistance, and bacterial persistence. As BHK regulation is diverse, inhibitors can be developed, such as antibiotic synergists, bacteriostatic/bactericidal agents, virulence inhibitors, and biofilm inhibitors. Inhibition of essential BHK has always been an amenable strategy due to the conserved binding sites of the domains across bacterial species and growth dependence. Hence, an inhibitor of BHK might block multiple TCS regulatory networks. This review describes the TCS system and the role of BHK in bacterial virulence and discusses the available inhibitors of BHK, which is a specific response regulator with essential structural features.

Impact of a Novel Antiseptic Lavage Solution on Acute Periprosthetic Joint Infection in Hip and Knee Arthroplasty.

Background: Periprosthetic joint infection (PJI) represents a challenge following hip or knee arthroplasty, demanding immediate intervention to prevent implant failure and systemic issues. Bacterial biofilm development on orthopedic devices worsens PJI severity, resulting in recurrent hospitalizations and significant economic burdens. The objective of this retrospective cohort study is to evaluate the efficacy of this novel antiseptic solution, never previously evaluated in vivo, in managing early post-operative or acute hematogenous PJI following primary hip and knee joint replacements. Methods: The inclusion criteria consist of patients with total hip arthroplasty (THA) or knee arthroplasty diagnosed with acute PJI through preoperative and intraoperative investigations, in accordance with the MSIS ICM 2018 criteria. The minimum required follow-up was 12 months from the cessation of antibiotic therapy. This novel antiseptic lavage solution is composed of ethanol, acetic acid, sodium acetate, benzalkonium chloride and water. Data included demographic characteristics, diagnostic criteria, surgical techniques, post-operative treatment and follow-up outcomes. Results: A total of 39 patients treated with Debridement, Antibiotics Pearls and Retention of the Implant (DAPRI) procedures using this solution between May 2021 and April 2023 were analyzed. At a mean follow-up of 24.6 ± 6.4 months, infection recurrence-free survival rates were 87.2%, with no local allergic reactions or relevant systemic adverse effects detected. Persistent PJI necessitated two-stage revision surgery. Conclusions: This novel antiseptic lavage solution shows promise as an adjunctive tool in the treatment of PJI, demonstrating support in infection control while maintaining a favorable safety profile.

Biofilm on total joint replacement materials can be reduced through electromagnetic induction heating using a portable device

BackgroundPeriprosthetic joint infection is a serious complication following joint replacement. The development of bacterial biofilms bestows antibiotic resistance and restricts treatment via implant retention surgery. Electromagnetic induction heating is a novel technique for antibacterial treatment of metallic surfaces that has demonstrated in-vitro efficacy. Previous studies have always employed stationary, non-portable devices. This study aims to assess the in-vitro efficacy of induction-heating disinfection of metallic surfaces using a new Portable Disinfection System based on Induction Heating.MethodsMature biofilms of three bacterial species: S. epidermidis ATCC 35,984, S. aureus ATCC 25,923, E. coli ATCC 25,922, were grown on 18 × 2 mm cylindrical coupons of Titanium-Aluminium-Vanadium (Ti6Al4V) or Cobalt-chromium-molybdenum (CoCrMo) alloys. Study intervention was induction-heating of the coupon surface up to 70ºC for 210s, performed using the Portable Disinfection System (PDSIH). Temperature was monitored using thermographic imaging. For each bacterial strain and each metallic alloy, experiments and controls were conducted in triplicate. Bacterial load was quantified through scraping and drop plate techniques. Data were evaluated using non-parametric Mann-Whitney U test for 2 group comparison. Statistical significance was fixed at p ≤ 0.05.ResultsAll bacterial strains showed a statistically significant reduction of CFU per surface area in both materials. Bacterial load reduction amounted to 0.507 and 0.602 Log10 CFU/mL for S. aureus on Ti6Al4V and CoCrMo respectively, 5.937 and 3.500 Log10 CFU/mL for E. coli, and 1.222 and 0.372 Log10 CFU/mL for S. epidermidis.ConclusionsElectromagnetic induction heating using PDSIH is efficacious to reduce mature biofilms of S aureus, E coli and S epidermidis growing on metallic surfaces of Ti6Al4V and CoCrMo alloys.

Role of the Yersinia pestis phospholipase D (Ymt) in the initial aggregation step of biofilm formation in the flea.

Yersinia pestis, the bacterial agent of plague, is maintained in nature in mammal-flea-mammal transmission cycles. After a flea feeds on a mammal with septicemic plague, the bacteria rapidly coalesce in the flea's digestive tract to form dense aggregates enveloped in a viscous matrix that often localizes to the foregut. This represents the initial stage of biofilm development that potentiates transmission of Y. pestis when the flea later bites a new host. The rapid aggregation likely occurs via a depletion-aggregation mechanism, a non-canonical first step of bacterial biofilm development. We found that the biofilm matrix is largely composed of host blood proteins and lipids, particularly cholesterol, and that the enzymatic activity of a Y. pestis phospholipase D (Ymt) enhances the initial aggregation. Y. pestis transmitted by flea bite is likely associated with this host-derived matrix, which may initially shield the bacteria from recognition by the host's intradermal innate immune response.

Human-Derived collagen hydrogel as an antibiotic vehicle for topical treatment of bacterial biofilms.

The complexity of chronic wounds creates difficulty in effective treatments, leading to prolonged care and significant morbidity. Additionally, these wounds are incredibly prone to bacterial biofilm development, further complicating treatment. The current standard treatment of colonized superficial wounds, debridement with intermittent systemic antibiotics, can lead to systemic side-effects and often fails to directly target the bacterial biofilm. Furthermore, standard of care dressings do not directly provide adequate antimicrobial properties. This study aims to assess the capacity of human-derived collagen hydrogel to provide sustained antibiotic release to disrupt bacterial biofilms and decrease bacterial load while maintaining host cell viability and scaffold integrity. Human collagen harvested from flexor tendons underwent processing to yield a gellable liquid, and subsequently was combined with varying concentrations of gentamicin (50-500 mg/L) or clindamycin (10-100 mg/L). The elution kinetics of antibiotics from the hydrogel were analyzed using liquid chromatography-mass spectrometry. The gel was used to topically treat Methicillin-resistant Staphylococcus aureus (MRSA) and Clostridium perfringens in established Kirby-Bauer and Crystal Violet models to assess the efficacy of bacterial inhibition. 2D mammalian cell monolayers were topically treated, and cell death was quantified to assess cytotoxicity. Bacteria-enhanced in vitro scratch assays were treated with antibiotic-embedded hydrogel and imaged over time to assess cell death and mobility. Collagen hydrogel embedded with antibiotics (cHG+abx) demonstrated sustained antibiotic release for up to 48 hours with successful inhibition of both MRSA and C. perfringens biofilms, while remaining bioactive up to 72 hours. Administration of cHG+abx with antibiotic concentrations up to 100X minimum inhibitory concentration was found to be non-toxic and facilitated mammalian cell migration in an in vitro scratch model. Collagen hydrogel is a promising pharmaceutical delivery vehicle that allows for safe, precise bacterial targeting for effective bacterial inhibition in a pro-regenerative scaffold.

Innovative Vancomycin-Loaded Hydrogel-Based Systems - New Opportunities for the Antibiotic Therapy.

Surgical site infections pose a significant challenge for medical services. Systemic antibiotics may be insufficient in preventing bacterial biofilm development. With the local administration of antibiotics, it is easier to minimize possible complications, achieve drugs' higher concentration at the injured site, as well as provide their more sustained release. Therefore, the main objective of the proposed herein studies was the fabrication and characterization of innovative hydrogel-based composites for local vancomycin (VAN) therapy. Presented systems are composed of ionically gelled chitosan particles loaded with vancomycin, embedded into biomimetic collagen/chitosan/hyaluronic acid-based hydrogels crosslinked with genipin and freeze-dried to serve in a flake/disc-like form. VAN-loaded carriers were characterized for their size, stability, and encapsulation efficiency (EE) using dynamic light scattering technique, zeta potential measurements, and UV-Vis spectroscopy, respectively. The synthesized composites were tested in terms of their physicochemical and biological features. Spherical structures with sizes of about 200 nm and encapsulation efficiencies reaching values of approximately 60% were obtained. It was found that the resulting particles exhibit stability over time. The antibacterial activity of the developed materials against Staphylococcus aureus was established. Moreover, in vitro cell culture study revealed that the surfaces of all prepared systems are biocompatible as they supported the proliferation and adhesion of the model MG-63 cells. In addition, we have demonstrated significantly prolonged VAN release while minimizing the initial burst effect for the composites compared to bare nanoparticles and verified their desired physicochemical features during swellability, and degradation experiments. It is expected that the developed herein system will enable direct delivery of the antibiotic at an exposed to infections surgical site, providing drugs sustained release and thus will reduce the risk of systemic toxicity. This strategy would both inhibit biofilm formation and accelerate the healing process.

Research Progress on the Combination of Quorum-Sensing Inhibitors and Antibiotics against Bacterial Resistance.

Bacterial virulence factors and biofilm development can be controlled by the quorum-sensing (QS) system, which is also intimately linked to antibiotic resistance in bacteria. In previous studies, many researchers found that quorum-sensing inhibitors (QSIs) can affect the development of bacterial biofilms and prevent the synthesis of many virulence factors. However, QSIs alone have a limited ability to suppress bacteria. Fortunately, when QSIs are combined with antibiotics, they have a better therapeutic effect, and it has even been demonstrated that the two together have a synergistic antibacterial effect, which not only ensures bactericidal efficiency but also avoids the resistance caused by excessive use of antibiotics. In addition, some progress has been made through in vivo studies on the combination of QSIs and antibiotics. This article mainly expounds on the specific effect of QSIs combined with antibiotics on bacteria and the combined antibacterial mechanism of some QSIs and antibiotics. These studies will provide new strategies and means for the clinical treatment of bacterial infections in the future.

Chestnut Honey Is Effective against Mixed Biofilms at Different Stages of Maturity.

The irresponsible overuse of antibiotics has increased the occurrence of resistant bacterial strains, which represents one of the biggest patient safety risks today. Due to antibiotic resistance and biofilm formation in bacteria, it is becoming increasingly difficult to suppress the bacterial strains responsible for various chronic infections. Honey was proven to inhibit bacterial growth and biofilm development, offering an alternative solution in the treatment of resistant infections and chronic wounds. Our studies included chestnut honey, valued for its high antibacterial activity, and the bacteria Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus, and S. epidermidis, known to form multi-species biofilm communities. Minimum inhibitory concentrations (MIC) of chestnut honey were determined for each bacterial strain. Afterwards, the mixed bacterial biofilms were treated with chestnut honey at different stages of maturity (incubation times: 2, 4, 6, 12, 24 h). The extent of biofilm inhibition was measured with a crystal violet assay and demonstrated by scanning electron microscopy (SEM). As the incubation time increased and the biofilm became more mature, inhibition rates decreased gradually. The most sensitive biofilm was the combination MRSA-S. epidermidis, with a 93.5% inhibition rate after 2 h of incubation. Our results revealed that chestnut honey is suitable for suppressing the initial and moderately mature stages of mixed biofilms.

Alteration of stainless-steel surface potential by modifying topography inhibits the development of bacterial biofilm

Alteration of stainless-steel surface potential by modifying topography inhibits the development of bacterial biofilm

Nanostructured Coatings Based on Graphene Oxide for the Management of Periprosthetic Infections.

To modulate the bioactivity and boost the therapeutic outcome of implantable metallic devices, biodegradable coatings based on polylactide (PLA) and graphene oxide nanosheets (nGOs) loaded with Zinforo™ (Zin) have been proposed in this study as innovative alternatives for the local management of biofilm-associated periprosthetic infections. Using a modified Hummers protocol, high-purity and ultra-thin nGOs have been obtained, as evidenced by X-ray diffraction (XRD) and transmission electron microscopy (TEM) investigations. The matrix-assisted pulsed laser evaporation (MAPLE) technique has been successfully employed to obtain the PLA-nGO-Zin coatings. The stoichiometric and uniform transfer was revealed by infrared microscopy (IRM) and scanning electron microscopy (SEM) studies. In vitro evaluation, performed on fresh blood samples, has shown the excellent hemocompatibility of PLA-nGO-Zin-coated samples (with a hemolytic index of 1.15%), together with their anti-inflammatory ability. Moreover, the PLA-nGO-Zin coatings significantly inhibited the development of mature bacterial biofilms, inducing important anti-biofilm efficiency in the as-coated samples. The herein-reported results evidence the promising potential of PLA-nGO-Zin coatings to be used for the biocompatible and antimicrobial surface modification of metallic implants.

Anti-Bacterial Activity of Green Synthesised Silver and Zinc Oxide Nanoparticles against Propionibacterium acnes.

Propionibacterium acnes plays a critical role in the development of acne vulgaris. There has been a rise in the number of patients carrying P. acnes strains that are resistant to antibiotics. Thus, alternative anti-microbial agents are required. Zinc oxide (ZnO-NPs) and silver (Ag-NPs) nanoparticles can be used against several antibiotic-resistant bacteria. The impact of Ag-NPs and ZnO-NPs against two clinical strains of P. acnes, P1 and P2, and a reference strain, NCTC747, were investigated in this research. A chemical approach for the green synthesis of Ag-NPs and ZnO-NPs from Peganum harmala was employed. The microtiter plate method was used to examine the effects of NPs on bacterial growth, biofilm development, and biofilm eradication. A broth microdilution process was performed in order to determine minimal inhibitory (MIC) concentrations. Ag-NPs and ZnO-NPs had a spherical shape and average dimensions of 10 and 50 nm, respectively. MIC values for all P. acnes strains for Ag-NPs and ZnO-NPs were 125 µg/mL and 250 µg/mL, respectively. Ag-NP and ZnO-NP concentrations of 3.9- 62.5 µg/mL and 15-62.5 µg/mL significantly inhibited the growth and biofilm formation of all P. acnes strains, respectively. ZnO-NP concentrations of 15-62.5 μg/mL significantly inhibited the growth of NCTC747 and P2 strains. The growth of P1 was impacted by concentrations of 31.25 μg/mL and 62.5 μg/mL. Biofilm formation in the NCTC747 strain was diminished by a ZnO-NP concentration of 15 μg/mL. The clinical strains of P. acnes were only affected by ZnO-NP titres of more than 31.25 μg/mL. Established P. acne biofilm biomass was significantly reduced in all strains at a Ag-NP and ZnO-NP concentration of 62.5 µg/mL. The findings demonstrated that Ag-NPs and ZnO-NPs exert an anti-bacterial effect against P. acnes. Further research is required to determine their potential utility as a treatment option for acne.

Engineering Bacterial Biofilm Development and Structure via Regulation of Silver Nanoparticle Density in Graphene Oxide Composite Coating.

Graphene-based composites have shown significant potential in the treatment of biofilm infections in clinical settings due to their exceptional antimicrobial properties and specific mechanisms. Nevertheless, a comprehensive understanding of the influence exerted by nanoparticles embedded in the composites on the development and structure of biofilms is still lacking. Here, we fabricate different graphene oxide-silver nanoparticle (GAg) composite-modified substrates (GAgS) with varying densities of silver nanoparticles (AgNPs) and investigate their effects on planktonic bacterial adhesion, subsequent biofilm formation, and mature biofilm structure. Our findings indicate that the initial attachment of Pseudomonas aeruginosa cells during biofilm formation is determined by the density of AgNPs on the GAgS surface. In contrast, the subsequent transition from adherent bacteria to the biofilm is determined by GAgS's synergistic antimicrobial effect. There exists a threshold for the inhibitory performance of GAgS, where the 20 μg/cm2 GAg composite completely prevents biofilm formation; below this concentration, GAgS delays the development of the biofilm and causes structural changes in the mature biofilm with enhanced bacterial growth and increased production of extracellular polymeric substance. More importantly, GAgS have minimal impact on mammalian cell morphology and proliferation while not inducing hemolysis in red blood cells. These results suggest that GAg composites hold promise as a therapeutic approach for addressing medical devices and implant-associated biofilm infections.

The Influence of Hydroxyapatite, Titanium, and Yttria-Stabilized Zirconia Oxide on Diversity of Bacterial Cultures Grown from Human Dental Biofilm Specimens in an In Vitro Model

Background: Titanium (TI) and yttria stabilized-zirconia oxide (YSZ) are dental materials commonly utilized at the soft-tissue interface surrounding dental implants. The influence of these surfaces on bacterial adhesion and biofilm development may affect clinical performance and patient susceptibility to inflammatory peri-implant disease. The purpose of this study was to evaluate the influence of the substrate material on biofilm diversity. Methods: Biofilms were cultured on TI, YSZ, and hydroxyapatite (HA) surfaces (control) using plaque specimens obtained from three human donors. Duplicate cultures grew for one, two, three, six or nine days. Biofilm diversity was then analyzed using 16S rRNA sequencing. The Shannon Diversity Index (SDI) was calculated for each experimental group. Microbial profiles were intercompared in a pairwise fashion to establish dissimilarity scores, which were recorded in a distance dissimilarity matrix. Results: A total of 16 taxa were identified, and relative abundances of the predominant phyla and genera did not appear statistically different across experimental groups. Biofilms grown on HA surfaces exhibited significantly higher alpha diversity compared with those formed on TI or YSZ (p<0.0001), although biofilms cultured on TI and YSG surfaces exhibited comparable diversity. Statistically significant differences in beta diversity associated with substrate (p=0.012) and growth period (p=0.001) were detected. Conclusions: Under the conditions described, biofilms grown on TI or YSZ appeared significantly less complex than those formed on HA. Transmucosal implant abutment surface characteristics represent one modifiable factor potentially influencing risk of peri-implant disease. Among risk of peri-implant disease. Among multiple considerations in abutment design, biofilm diversity performance may represent a clinically relevant benchmark.

Biofilm formation and manipulation with optical tweezers.

Some bacterial species form biofilms in suboptimal growth and environmental conditions. Biofilm structures allow the cells not only to optimize growth with nutrient availability but also to defend each other against external stress, such as antibiotics. Medical and bioengineering implications of biofilms have led to an increased interest in the regulation of bacterial biofilm formation. Prior research has primarily focused on mechanical and chemical approaches for stimulating and controlling biofilm formation, yet optical techniques are still largely unexplored. In this paper, we investigate the biofilm formation of Bacillus subtilis in a minimum biofilm-promoting medium (MSgg media) and explore the potential of optical trapping in regulating bacterial aggregation and biofilm development. Specifically, we determine the most advantageous stage of bacterial biofilm formation for optical manipulation and investigate the impact of optical trapping at different wavelengths on the aggregation of bacterial cells and the formation of biofilm. The investigation of optically regulated biofilm formation with optical tweezers presents innovative methodologies for the stimulation and suppression of biofilm growth through the application of lasers.

The effect of 3D-printed bone tissue scaffolds geometrical designs on bacterial biofilm formation

Bone fractures are recognized as a global health problem. A common strategy to tackle this issue is to employ a tissue engineering scaffold to accelerate tissue healing. However, one of the main challenges that can result in delaying the recovery is the risk of bacterial infections. This study aims to assess the impact of the geometry and the porosity of tissue scaffolds on the Staphylococcus aureus biofilm formation. Three triply periodic minimal surface designs of Schwarz primitive (SP), gyroid (GY), and Schwarz diamond (SD) and re-entrant auxetic (RE) design were examined and compared to a reference design (RD) considering two different porosity levels of 75% and 45%. The amount of biofilm was quantified using crystal violet assay and was visualized using scanning electron microscopy. The SP scaffold, with low porosity, exhibited a significantly less amount of bacterial biofilm formation and was regarded as having the best design among the others, while the SD with low porosity showed the greatest amount of biofilm. The morphological analysis was also in line with the crystal violet assay results. On the other hand, the surface roughness was affected by the complexity, geometrical variations, and limitations of fused filament fabrication three-dimensional printing. For the RD, SP, GY, and SD designs, an increase in surface roughness was demonstrated to increase the production of bacterial biofilms. Without statistical significance, the RE design showed the opposite trend. Contrary to other designs, the increase in pore size of the SP and GY designs was associated with the development of bacterial biofilms. This study suggests that it is possible to minimize the likelihood of bacterial biofilm formation by optimizing the scaffold geometry and its manufacturing.

N-АЦЕТИЛЦИСТЕИН: ВОЗМОЖНОСТИ И ПЕРСПЕКТИВЫ ПРИМЕНЕНИЯ ПРИ ИНФЕКЦИЯХ МОЧЕВЫВОДЯЩИХ ПУТЕЙ

A review of literature data on the prospects for the use of acetylcysteine in the treatment of urinary tract infections is presented. In addition to the well-known mucolytic effect, ACC has antibacterial, anti-inflammatory and antioxidant properties. A number of studies have revealed the ability of ACC to suppress the development of bacterial biofilms, which is important in the treatment of chronic infections, including urinary tract infections. Studies have also demonstrated the anti-inflammatory activity of ACC, expressed in a decrease in the production of interleukins. Of interest is the property of ACC to suppress urease Proteus mirabilis, one of the main causative agents of nasocomial infection in urology. This property of ACC can be used in the prevention of infections associated with urinary catheters and ureteral stents incrustations.

A versatile micromodel technology to explore biofilm development in porous media flows.

Bacterial biofilms that grow in porous media are critical to ecosystem processes and applications ranging from soil bioremediation to bioreactors for treating wastewater or producing value-added products. However, understanding and engineering the complex phenomena that drive the development of biofilms in such systems remains a challenge. Here we present a novel micromodel technology to explore bacterial biofilm development in porous media flows. The technology consists of a set of modules that can be combined as required for any given experiment and conveniently tuned for specific requirements. The core module is a 3D-printed micromodel where biofilm is grown into a perfusable porous substrate. High-precision additive manufacturing, in particular stereolithography, is used to fabricate porous scaffolds with precisely controlled architectures integrating flow channels with diameters down to several hundreds of micrometers. The system is instrumented with: ultraviolet-C light-emitting diodes; on-line measurements of oxygen consumption and pressure drop across the porous medium; camera and spectrophotometric cells for the detection of biofilm detachment events at the outlet. We demonstrate how this technology can be used to study the development of Pseudomonas aeruginosa biofilm for several days within a network of flow channels. We find complex dynamics whereby oxygen consumption reaches a steady-state but not the pressure drop, which instead features a permanent regime with large fluctuations. We further use X-ray computed microtomography to image the spatial distribution of biofilms and computational fluid dynamics to link biofilm development with local flow properties. By combining the advantages of additive manufacturing for the creation of reproducible 3D porous microarchitectures with the flow control and instrumentation accuracy of microfluidics, our system provides a platform to study the dynamics of biofilm development in 3D porous media and to rapidly test new concepts in process engineering.