Detection System Research Articles

Deep learning-based intrusion detection system for in-vehicle networks with knowledge graph and statistical methods

Deep learning-based intrusion detection system for in-vehicle networks with knowledge graph and statistical methods

Detection of Defects in Polyethylene and Polyamide Flat Panels Using Airborne Ultrasound-Traditional and Machine Learning Approach

This paper presents the use of noncontact ultrasound for the nondestructive detection of defects in two plastic plates made of polyamide (PA6) and polyethylene (PE). The aim of the study was to: (1) assess the presence of defects as well as their size, type, and orientation based on the amplitudes of Lamb ultrasonic waves measured in plates made of polyamide (PA6) and polyethylene (PE) due to their homogeneous internal structure, which mainly determined the selection of such model materials for testing; and (2) verify the possibilities of building automatic quality control and defect detection systems based on ML based on the results of the above-mentioned studies within the Industry 4.0/5.0 paradigm. Tests were conducted on plates with generated synthetic defects resembling defects found in real materials such as delamination and cracking at the edge of the plate and a crack (discontinuity) in the center of the plate. Defect sizes ranged from 1 mm to 15 mm. Probes at 30 kHz were used to excite Lamb waves in the slab material. This method is sensitive to the slightest changes in material integrity. A significant decrease in signal amplitude was observed, even for defects of a few millimeters in length. In addition to traditional methods, machine learning (ML) was used for the analysis, allowing an initial assessment of the method’s potential for building cyber-physical systems and digital twins. By training ML models on ultrasonic data, algorithms can distinguish subtle differences between signals reflected from normal and defective areas of the material. Defect types such as voids, cracks, or weak bonds often produce distinct acoustic signatures, which ML models can learn to recognize with high accuracy. Using techniques like feature extraction, ML can process these high-dimensional ultrasonic datasets, identifying patterns that human inspectors might overlook. Furthermore, ML models are adaptable, allowing the same trained algorithms to work on various material batches or panel types with minimal retraining. This combination of automation and precision significantly enhances the reliability and efficiency of quality control in industrial manufacturing settings. The achieved accuracy results, 0.9431 in classification and 0.9721 in prediction, are comparable to or better than the AI-based quality control results in other noninvasive methods of flat surface defect detection, and in the presented ultrasonic method, they are the first described in this way. This approach demonstrates the novelty and contribution of artificial intelligence (AI) methods and tools, significantly extending and automating existing applications of traditional methods. The susceptibility to augmentation by AI/ML may represent an important new property of traditional methods crucial to assessing their suitability for future Industry 4.0/5.0 applications.

A Comprehensive Review on Accident Detection Using Artificial Intelligence and Machine Learning

This paper reviews the role of Artificial Intelligence (AI) and Machine Learning (ML) in accident detection systems, focusing on the application of image processing techniques and Convolutional Neural Networks (CNNs) to enable detection. Through a comprehensive analysis of recent methodologies, challenges, limitations, and future research directions, this paper aims to provide a detailed understanding of how AI and ML are advancing the field of accident detection

Enhancing Fraud Detection Systems through Advanced Data Engineering Techniques

Aims: Fraud remains a persistent issue in various industries, particularly in finance, e-commerce, and healthcare, where traditional rule-based systems have struggled to keep pace with the evolving complexity of fraudulent activities. This study aims to develop an enhanced fraud detection framework by addressing the limitations of traditional rule-based systems, particularly in industries where sophisticated fraud schemes prevail. Study Design: The research utilizes advanced data engineering techniques, including big data analytics, machine learning, and real-time processing, to improve the accuracy and efficiency of fraud detection systems. Place and Duration of Study: The study was conducted over two years across industries with high fraud susceptibility, including financial services, e-commerce platforms, and healthcare organizations. Methodology: The framework integrates various data sources, including transaction logs, user behavior, and external fraud indicators. These datasets were pre-processed through data cleaning, feature engineering, and integration. Supervised and unsupervised machine learning models, such as Random Forest and Gradient Boosting, were applied to detect fraud patterns. Real-time data processing enabled immediate detection and response. The system continuously learned from historical data, adapting to new fraud tactics and improving detection over time. Results: The proposed framework demonstrated a significant improvement in fraud detection accuracy, with machine learning models achieving over 90% accuracy rates. There was also a 30% reduction in false positives compared to traditional methods, and detection times were shortened by 40%, enabling faster identification and mitigation of emerging fraud schemes. Conclusion: This study concludes that integrating advanced data engineering techniques with machine learning significantly enhances fraud detection systems' accuracy, scalability, and adaptability. While promising, further improvements are needed, particularly in addressing the evolving nature of fraud schemes and ensuring the scalability of real-time data processing. These areas present opportunities for future research and development.

Experimental Investigation of a Recurrent Optical Spectrum Slicing Receiver for Intensity Modulation/Direct Detection Systems Using Programmable Photonics

Experimental Investigation of a Recurrent Optical Spectrum Slicing Receiver for Intensity Modulation/Direct Detection Systems Using Programmable Photonics

Nondestructive Detection of Litchi Stem Borers Using Multi-Sensor Data Fusion

To enhance lychee quality assessment and address inconsistencies in post-harvest pest detection, this study presents a multi-source fusion approach combining hyperspectral imaging, X-ray imaging, and visible/near-infrared (Vis/NIR) spectroscopy. Traditional single-sensor methods are limited in detecting pest damage, particularly in lychees with complex skins, as they often fail to capture both external and internal fruit characteristics. By integrating multiple sensors, our approach overcomes these limitations, offering a more accurate and robust detection system. Significant differences were observed between pest-free and infested lychees. Pest-free lychees exhibited higher hardness, soluble sugars (11% higher in flesh, 7% higher in peel), vitamin C (50% higher in flesh, 2% higher in peel), polyphenols, anthocyanins, and ORAC values (26%, 9%, and 14% higher, respectively). The Vis/NIR data processed with SG+SNV+CARS yielded a partial least squares regression (PLSR) model with an R2 of 0.82, an RMSE of 0.18, and accuracy of 89.22%. The hyperspectral model, using SG+MSC+SPA, achieved an R2 of 0.69, an RMSE of 0.23, and 81.74% accuracy, while the X-ray method with support vector regression (SVR) reached an R2 of 0.69, an RMSE of 0.22, and 76.25% accuracy. Through feature-level fusion, Recursive Feature Elimination with Cross-Validation (RFECV), and dimensionality reduction using PCA, we optimized hyperparameters and developed a Random Forest model. This model achieved 92.39% accuracy in pest detection, outperforming the individual methods by 3.17%, 10.25%, and 16.14%, respectively. The multi-source fusion approach also improved the overall accuracy by 4.79%, highlighting the critical role of sensor fusion in enhancing pest detection and supporting the development of automated non-destructive systems for lychee stem borer detection.

Role of Machine and Deep Learning Algorithms in Secure Intrusion Detection Systems (IDS) for IOT & Smart Cities

In this study the authors have examines various machine learning algorithms that could be used in IDS for making secure IoT and Smart Cities. The study examines various deep learning architectures of supervised, unsupervised, and semi-supervised learning methods to improve security and resource usage. Federated learning, edge computing, explainable AI, adversarial machine learning defense, and transfer learning are also explored for smart farming and IoT challenges. Machine learning has the potential to improve security and agricultural sustainability, but it must be researched and developed.

The Impact of Afterpulsing Effects in Single-Photon Detectors on the Performance Metrics of Single-Photon Detection Systems

A single-photon detection system based on InGaAs SPADs is a high-precision optical measurement system capable of detecting quantum-level optical signals. However, the afterpulsing effect when using InGaAs SPADs severely limits their practical utility. The impact of afterpulsing effects on the performance of systems based on this type of detector can no longer be ignored. Therefore, this paper provides a detailed analysis of the measurement errors induced by afterpulsing effects and proposes a correction method based on a power-law model. This method analyzes the probability distribution of afterpulsing effects using the power-law model and improves the expressions for the system’s average count rate and signal-to-noise ratio by calculating the average number of afterpulses within the average response time. The influence of afterpulse probability and dead time on the system’s average count rate is also analyzed. This afterpulse correction method mitigates the measurement errors caused by afterpulsing effects, thereby enhancing the system’s measurement accuracy.

Stress Detection System using Machine Learning and Sensors

This project presents a novel stress detection system that leverages machine learning and sensor technology to monitor and assess stress levels in real-time. As stress has become a widespread concern affecting mental health, our system integrates wearable sensors—such as heart rate monitors, galvanic skin response sensors, and accelerometers—to capture physiological data indicative of stress. The project involves several key components: data collection and preprocessing, feature extraction, and the development of machine learning models capable of accurately classifying stress levels based on the sensor data. Various algorithms, including Support Vector Machines and Neural Networks, will be employed and optimized for performance. The system is designed to provide real-time feedback to users, offering insights and personalized recommendations for stress management based on detected levels. A user-friendly interface will enable individuals to track their stress over time, fostering greater awareness and encouraging proactive coping strategies

Compact highly sensitive photothermal RT-LAMP chip for simultaneous multidisease detection.

Developing instant detection systems with disease diagnostic capabilities holds immense importance for remote or resource-limited areas. However, the task of creating these systems-which are simultaneously easy to operate, rapid in detection, and cost-effective-remains a challenge. In this study, we present a compact highly sensitive photothermal reverse transcriptase-loop-mediated isothermal amplification (RT-LAMP) chip (SPRC) designed for the detection of multiple diseases. The nucleic acid (NA) amplification on the chip is achieved through LAMP driven by either LED illumination or simple sunlight focusing. SPRC performs sample addition and amplification within a limited volume and autonomous enrichment of NA during the sample addition process, achieving a limit of detection (LOD) as low as 0.2 copies per microliter. Through 120 clinical samples, we achieved an accuracy of 95%, with a specificity exceeding 97.5%. Overall, SPRC has achieved promising progress in the application of point-of-care testing (POCT) by using light energy to simultaneously detect multiple diseases.

A computationally efficient method for induction motor bearing fault detection based on parallel convolutions and semi-supervised GAN

ABSTRACT Accurate and timely bearing fault detection is imperative for optimal system functioning and the implementation of preventative maintenance measures. Deep learning models provide viable solutions to these malfunctions, however, the lack of labelled data makes the training both expensive and cumbersome. To remedy this, various semi-supervised approaches have surfaced in the last decade, significantly mitigating the need for extensive labelled data but with added computational cost. This study proposes one such approach by leveraging generative adversarial networks (GAN) trained on a time-frequency based representation. The proposed Parallel Convolutions Semi-Supervised GAN, namely PC-SSGAN, uses bottleneck parallel convolutions blocks to capture multi-scale features in both local and global contexts, lacing both the generator and discriminator with enhanced feature extraction capabilities and simultaneously reducing the parameters and training time. The Proposed framework is evaluated on two distinct open-source datasets. The classification accuracy for both models exceeded 99.50%. Moreover, the proposed parallel convolutions-based architecture spent approximately 33% less time on training than the normal convolutional layers. It has been foreseen that the proposed fault detection system can be integrated into the motor fault tolerant control system to produce a unified framework that can make informed decisions to handle the bearing faults effectively.

Intrusion detection in cluster‐based wireless sensor networks: Current issues, opportunities and future research directions

AbstractWireless sensor network (WSN) cluster‐based architecture is a system designed to control and monitor specific events or phenomena remotely, and one of the important concerns that need quick attention is security risks such as an intrusion in WSN traffic. At the same time, a high‐level security method may refer to an intrusion detection system|intrusion detection systems (IDS), which may be employed effectively to achieve a higher level of security in detecting an intruder attack or any attack initiated within a WSN system. The significance of the detection of network intrusions on heterogeneous cluster‐based sensor networks with wireless connections, as well as the approaches to machine learning utilised in IDS model development, were discussed. In addition, this research conducted several comparative studies of feature selection techniques and machine learning methodologies in the development of intrusion detection systems. The authors used a bibliometric indicator to identify the leading trends when it comes to IDS, and the VOS viewer was used to create a spatial mapping of co‐authorship, co‐occurrence, and citation types of analysis with their respective units of study. The purpose of this research paper is to generate relevant findings and a research problem formulation that can lead to a research gap in the research topic's domain area.

Measurements of N2 + ions in an inductively coupled plasma using saturated cavity ringdown spectroscopy

Abstract This paper presents a unique study of the bulk plasma characteristics in a low pressure inductively coupled nitrogen plasma. Saturated cavity ringdown spectroscopy (sat-CRDS) has been used to determine the absolute number densities and translational temperatures of N2 +(X, ν = 0). The effect of saturation is readily accounted for by using an effective saturation parameter, Seff , and determined by a simple method employing measurements at two different gain settings of the detection system. The appropriateness of this method is confirmed by comparison with fitting individual ringdown data using a time-dependent saturation parameter, S(t), within the local approximation model for sat-CRDS; the two methods are in excellent agreement in returning absolute number densities and translational temperatures. N2 +(X, ν = 0) number densities are determined across a matrix of pressure (10 − 100 mTorr) and rf power (200 − 400 W) conditions with maximum number densities of ca. 1.3 × 1010 cm−3 while translational temperatures range from 600 − 1500 K.

An innovative framework to securely transfer data through the Internet of Things using advanced generative adversarial networks

The Internet of Things (IoT) is developing so quickly that cloud-centric computing finds it challenging to keep up with the demands of usability and low latency. Edge computing unifies computing, networking, storage and applications into a distributed open system. At the edge of the IoT, it provides intelligent services. The edge network is made up of several wired and wireless networks, and edge nodes have constrained amounts of memory and processing power. The edge network is vulnerable to several types of cyberattacks because of these factors. Large-scale network data gathering and detection for IoT security is also challenging for an IoT edge node to provide. Data analytics for intrusion detection guarantees high accuracy of intrusion detection systems (IDSs), but the implementation of such algorithms on IoT might be a challenge due to the limited resources on edge nodes. Inspired in part by these challenges, we suggest a sophisticated IDS based on a generative adversarial network (GAN). This article suggests a novel method for detecting intrusions in the IoTs networks that make use of Colony Predator Algorithm (CPA) for optimization of the detection process. Through the use of GANs to create real-looking data samples, the suggested technique helps to have reliable anomaly and intrusion detection. The integration improves the training process, making it more efficient and enabling the CPA system to better differentiate between benign and malicious activities, which exponentially raises the system's efficiency.

Self-Rectifying Memristor-Based Reservoir Computing for Real-Time Intrusion Detection in Cybersecurity.

The increasing sophistication of cybersecurity threats, driven by the proliferation of big data and the Internet of Things (IoT), necessitates the development of advanced real-time intrusion detection systems (IDSs). In this study, we present a novel approach that integrates NiO-doped WO3-x/ZnO bilayer self-rectifying memristors (SRMs) within a reservoir computing (RC) framework for IDS applications. The proposed crossbar array architecture exploits the exceptional dynamic properties of SRMs, achieving a classification accuracy of 93.07% on the CSE-CIC-IDS2018 data set, while demonstrating ultrahigh information-processing efficiency. Our approach not only leverages the tunable characteristics of memristors but also addresses the challenge of sneak path currents in large-scale integration, offering a robust and scalable solution for next-generation IDS. This work exemplifies the power of emerging electronics in enhancing cybersecurity through innovative hardware implementations.

Screening Inhibitors of α-Amylase in Polygala Radix Based on an Online Targeted Detection System and Molecular Docking.

Targeted screening of inhibitors of key enzymes in the progression of diabetes from natural products is one of the effective methods for the treatment of diabetes. Polygala has been proved to reduce glucose levels; however, the bioactive compounds in Polygalae Radix (PR) that have anti-diabetic properties are unknown. The purpose of this study was to explore the material basis of the anti-diabetic effect of PR by inhibiting α-amylase through an online detection system and molecular docking. An online analysis platform was established and optimized for the screening of potent enzyme inhibitors from complex mixtures based on ultra-performance liquid chromatography-photodiode array-quadrupole-time-of-flight-mass spectrometry-α-amylase-fluorescence detector (UHPLC-PDA-Q-TOF-MSn-α-amylase-FLD) detection system and molecular docking, which could efficiently separate extracts, quickly detect α-amylase inhibitors, and determine their structures. Molecular docking confirms the inhibition of these compounds. The molecular interaction between α-amylase and the active compound was evaluated. Among the 101 compounds identified, 28 compounds had a strong inhibitory effect on α-amylase. Molecular docking screening confirmed the inhibition of these compounds and evaluated the molecular interactions between α-amylase and 30 active compounds, which strongly supported the experimental results. Among the evaluated compounds, onjisaponin R (83) and polygalaxanthone III (11) have the strongest inhibitory activity to α-amylase (the binding energies were -9.639 and -8.972 kcal/mol, respectively) and are potential lead compounds against diabetes. This study proved the feasibility of using the existing platform to screen the active ingredients in PR extract, and provided a practical method for the rapid screening of potential anti-diabetic active ingredients in traditional Chinese medicine.

Deep Learning-Based Slice Thickness Reduction for Computer-Aided Detection of Lung Nodules in Thick-Slice CT

Background/Objectives: Computer-aided detection (CAD) systems for lung nodule detection often face challenges with 5 mm computed tomography (CT) scans, leading to missed nodules. This study assessed the efficacy of a deep learning-based slice thickness reduction technique from 5 mm to 1 mm to enhance CAD performance. Methods: In this retrospective study, 687 chest CT scans were analyzed, including 355 with nodules and 332 without nodules. CAD performance was evaluated on nodules, to which all three radiologists agreed. Results: The slice thickness reduction technique significantly improved the area under the receiver operating characteristic curve (AUC) for scan-level analysis from 0.867 to 0.902, with a p-value < 0.001, and nodule-level sensitivity from 0.826 to 0.916 at two false positives per scan. Notably, the performance showed greater improvements on smaller nodules than larger nodules. Qualitative analysis confirmed that nodules mistaken for ground glass on 5 mm scans could be correctly identified as part-solid on the refined 1 mm CT, thereby improving the diagnostic capability. Conclusions: Applying a deep learning-based slice thickness reduction technique significantly enhances CAD performance in lung nodule detection on chest CT scans, supporting the clinical adoption of refined 1 mm CT scans for more accurate diagnoses.

A novel optimization-driven deep learning framework for the detection of DDoS attacks.

Distributed denial of service (DDoS) attack is one of the most hazardous assaults in cloud computing or networking. By depleting resources, this attack renders the services unavailable to end users and leads to significant financial and reputational damage. Hence, identifying such threats is crucial to minimize revenue loss, market share, and productivity loss and enhance the brand reputation. In this study, we implemented an effective intrusion detection system using deep learning approach. The suggested framework includes three phases: Data pre-processing, Data balancing, and Classification. First, we prepare the valid data, which is helpful for further processing. Then, we balance the given pre-processed data by Conditional generative adversarial network (CGAN), and as a result, we can minimize the bias towards the majority classes. Finally, we distinguish whether the traffic is attack or benign using a stacked sparse denoising autoencoder (SSDAE) with a firefly-black widow (FA-BW) hybrid optimization algorithm. All these experiments are validated through the CICDDoS2019 dataset and compared with well-received techniques. From these findings, we observed that the proposed strategy detects DDoS attacks significantly more accurately than other approaches. Based on our findings, this study highlights the crucial role played by advanced deep learning techniques and hybrid optimization algorithms in strengthening cybersecurity against DDoS attacks.

Micro-Incubator Protocol for Testing a CO2 Sensor for Early Warning of Spontaneous Combustion

A protocol for detecting the potential occurrence of spontaneous combustion (SC) in stored cottonseeds and peanuts using a micro-incubator is described. The protocol indicates how to quantify CO2 production rates and final CO2 levels in wet versus dry cottonseed and peanut samples, which can provide crucial data for the early detection of SC risk in storage facilities. The experimental design utilizes a micro-incubator to simulate conditions found in large bulk crop storage. Parameters monitored include CO2 concentration, temperature, and relative humidity. The protocol includes preparation methods, experimental procedures for both control (dry) and wet seed tests, and test termination criteria that allow for safe experimentation of likely pathogenic fungi. The protocol has three replicates for wet and dry conditions. The protocol is intended to facilitate future experimental studies and ultimately contribute to the development of a consistently reliable early warning fire detection system for SC in cottonseed and peanut warehouse facilities. A consistently reliable fire detection system would address a critical need in the cotton and peanut industry for improved fire risk management and insurability of storage facilities.

Enhancing detection of various pancreatic lesions on endoscopic ultrasound through artificial intelligence: a basis for computer-aided detection systems.

Endoscopic ultrasound (EUS) is the most sensitive method for evaluation of pancreatic lesions but is limited by significant operator dependency. Artificial intelligence (AI), in the form of computer-aided detection (CADe) systems, has shown potential in increasing accuracy and bridging operator dependency in several endoscopic domains. However, the complexity of integrating AI into EUS is far more challenging. This aims to develop and test the basis for a CADe system for real-time detection and segmentation of all pancreatic lesions. In this single-center study EUS studies of pancreatic findings were included. Lesions were outlined by two expert (>5years performing EUS) endoscopists, and the two leading types of models were benchmarked. The models' performance was evaluated through per-pixel intersection over union (IoU). A total of 1497 EUS images from 165 patients were evaluated. The dataset included malignancies, neuroendocrine tumors, benign cysts, chronic and acute pancreatitis, normal fatty pancreas, and benign lesions. The best model demonstrated detection and segmentation on the test set with a mean IoU of 0.73, achieving a PPV, NPV, total accuracy, and ROC of 0.82, 0.96, 0.95, and 0.95, respectively. The algorithm is adaptable for real-time processing. We developed and tested deep learning models for real-time detection and segmentation of pancreatic lesions during EUS with promising results. This constitutes the basis for a CADe system for EUS, which could be valuable in future detection and evaluation of pancreatic lesions. Further studies for validation and generalization are underway.