Detection Of ssDNA Research Articles

An ultra-sensitive suboptimal protospacer adjacent motif enhanced rolling circle amplification assay based on CRISPR/Cas12a for detection of miR-183.

MicroRNAs (miRNAs) have been recognized as promising diagnostic biomarkers for Diabetic Retinopathy (DR) due to their notable upregulation in individuals with the condition. However, the development of highly sensitive miRNAs assays for the rapid diagnosis of DR in clinical settings remains a challenging task. In this study, we introduce an enhanced CRISPR/Cas12a assay, leveraging suboptimal PAM (sPAM)-mediated Cas12a trans-cleavage in conjunction with rolling circle amplification (RCA). sPAM was found to perform better than canonical PAM (cPAM) in the detection of Cas12a-mediated ssDNA detection at low concentrations and was used instead of canonical PAM (cPAM) to mediate the detection. The parameters of reactions have also been optimized. In comparison with cPAM, sPAM has higher sensitivity in the detection of ssDNA at concentrations lower than 10 pM by Cas12a. By replacing cPAM with sPAM in the padlock template of RCA, ultra-high sensitivity for miR-183 detection is achieved, with a detection limit of 0.40 aM. within 25min and a linear range spanning from 1 aM. to 1 pM. Our assay also exhibits exceptional specificity in detecting miR-183 from other miRNAs. Furthermore, the applicability of our assay for the sensitive detection of miR-183 in clinical serum samples is also validated. This study introduces a groundbreaking assay with excellent performance through a simple modification, which not only addresses existing diagnostic challenges, but also opens exciting new avenues for clinical diagnosis in the realm of DR.

Novel Anti-CRISPR-Assisted CRISPR Biosensor for Exclusive Detection of Single-Stranded DNA (ssDNA).

Nucleic acid analysis plays an important role in disease diagnosis and treatment. The discovery of CRISPR technology has provided novel and versatile approaches to the detection of nucleic acids. However, the most widely used CRISPR-Cas12a detection platforms lack the capability to distinguish single-stranded DNA (ssDNA) from double-stranded DNA (dsDNA). To overcome this limitation, we first employed an anti-CRISPR protein (AcrVA1) to develop a novel CRISPR biosensor to detect ssDNA exclusively. In this sensing strategy, AcrVA1 cut CRISPR guide RNA (crRNA) to inhibit the cleavage activity of the CRISPR-Cas12a system. Only ssDNA has the ability to recruit the cleaved crRNA fragment to recover the detection ability of the CRISPR-Cas12 biosensor, but dsDNA cannot accomplish this. By measuring the recovered cleavage activity of the CRISPR-Cas12a biosensor, our developed AcrVA1-assisted CRISPR biosensor is capable of distinguishing ssDNA from dsDNA, providing a simple and reliable method for the detection of ssDNA. Furthermore, we demonstrated our developed AcrVA1-assisted CRISPR biosensor to monitor the enzymatic activity of helicase and screen its inhibitors.

Identification of 1600 replication origins in S. cerevisiae.

There are approximately 500 known origins of replication in the yeast genome, and the process by which DNA replication initiates at these locations is well understood. In particular, these sites are made competent to initiate replication by loading of the Mcm replicative helicase prior to the start of S phase; thus, 'a site that binds Mcm in G1' might be considered to provide an operational definition of a replication origin. By fusing a subunit of Mcm to micrococcal nuclease, we previously showed that known origins are typically bound by a single Mcm double hexamer, loaded adjacent to the ARS consensus sequence (ACS). Here, we extend this analysis from known origins to the entire genome, identifying candidate Mcm binding sites whose signal intensity varies over at least three orders of magnitude. Published data quantifying single-stranded DNA (ssDNA) during S phase revealed replication initiation among the most abundant 1600 of these sites, with replication activity decreasing with Mcm abundance and disappearing at the limit of detection of ssDNA. Three other hallmarks of replication origins were apparent among the most abundant 5500 sites. Specifically, these sites: (1) appeared in intergenic nucleosome-free regions flanked on one or both sides by well-positioned nucleosomes; (2) were flanked by ACSs; and (3) exhibited a pattern of GC skew characteristic of replication initiation. We conclude that, if sites at which Mcm double hexamers are loaded can function as replication origins, then DNA replication origins are at least threefold more abundant than previously assumed, and we suggest that replication may occasionally initiate in essentially every intergenic region. These results shed light on recent reports that as many as 15% of replication events initiate outside of known origins, and this broader distribution of replication origins suggest that S phase in yeast may be less distinct from that in humans than widely assumed.

Identification of 1600 replication origins in S. cerevisiae

There are approximately 500 known origins of replication in the yeast genome, and the process by which DNA replication initiates at these locations is well understood. In particular, these sites are made competent to initiate replication by loading of the Mcm replicative helicase prior to the start of S phase; thus, ‘a site that binds Mcm in G1’ might be considered to provide an operational definition of a replication origin. By fusing a subunit of Mcm to micrococcal nuclease, we previously showed that known origins are typically bound by a single Mcm double hexamer, loaded adjacent to the ARS consensus sequence (ACS). Here, we extend this analysis from known origins to the entire genome, identifying candidate Mcm binding sites whose signal intensity varies over at least three orders of magnitude. Published data quantifying single-stranded DNA (ssDNA) during S phase revealed replication initiation among the most abundant 1600 of these sites, with replication activity decreasing with Mcm abundance and disappearing at the limit of detection of ssDNA. Three other hallmarks of replication origins were apparent among the most abundant 5500 sites. Specifically, these sites: (1) appeared in intergenic nucleosome-free regions flanked on one or both sides by well-positioned nucleosomes; (2) were flanked by ACSs; and (3) exhibited a pattern of GC skew characteristic of replication initiation. We conclude that, if sites at which Mcm double hexamers are loaded can function as replication origins, then DNA replication origins are at least threefold more abundant than previously assumed, and we suggest that replication may occasionally initiate in essentially every intergenic region. These results shed light on recent reports that as many as 15% of replication events initiate outside of known origins, and this broader distribution of replication origins suggest that S phase in yeast may be less distinct from that in humans than widely assumed.

Synthesis, photophysical, electrochemical and morphological properties of a novel cross-linked chitosan-based fluorescent polymer: A fluorescence sensor for single-stranded DNA

This report details the first-time use of the perylene-3,4,9,10-tetracarboxylic dianhydride as a cross-linker to synthesize a novel fluorescent, chitosan-based cross-linked polymer (3). The polymer has single-stranded DNA (ssDNA) binding properties that can be used in sensor production for detecting salmon sperm DNA. Chitosan polymer's solubility is poor and restrictedto only acidic media. In contrast, this new fluorescent chitosan polymer was soluble in various organic solvents and aqueous solutions at different pHs. Its absorption, photophysical, electrochemical and morphological properties were investigated in detail. Gel permeation chromatography determined the weight average molecular mass (Mw) of polymer 3 as 21300 g/mol. Seventeen hydrophobic perylene units were determined in the cross-linked network. The energy levels of the highest occupied molecular orbitals and lowest unoccupied molecular orbitals of the new polymer 3 were calculated as −6.24 and −3.96 eV, corresponding to the band gap of 2.28 eV. Fluorescence and ultraviolet spectroscopy techniques were used to study the interaction between ssDNA and polymer 3. The interaction pointed to the intercalative mode, and the cross-linked chitosan can be used as a stable and sensitive platform for ssDNA detection. These results show a new class of organic biopolymers that could yield promising potential in many biomedical applications.

Synthetic Receptor Based on a Peptide Antibiotic-Functionalized Chimera for Hybridization-Based Polynucleotide Detection.

Nanopores offer highly sensitive, low-cost, and single-molecule sensing capabilities, and the societal impact of this approach is best captured by the advent of nanopore-based DNA detection and sequencing technologies, which extract genomic information without amplification. To address a critical difficulty plaguing such undertakings involving especially protein-based nanopores isolated in lipid bilayers, namely, the formation of a stable, long-lasting single nanopore, we pioneer herein an approach for generating functional nanostructures enabling small single-stranded DNA (ssDNA) detection. We designed a dynamic hybrid construct by appending extramembrane peptide nucleic acid (PNA) segments to the C-terminus of modified ion channel-forming alamethicin monomers. We found that the resulting chimeric molecules successfully coassemble in a voltage-dependent manner in planar lipid membranes generating diameter-variable oligomers. The subsequent interaction at the flexible extramembrane segment of such formed dynamic nanopores with aqueously added complementary ssDNA fragments leads to overall conformational alterations affecting the peptide assembly state kinetics and mediated ionic current. Such recognition events were found specific to the primary structure of target ssDNA and uninhibited the presence of serum. Our platform demonstrates the feasibility of designing an entirely new class of versatile chimeric biosensors, for which, dependent upon the nature of the attached receptor moiety and underlying recognition chemistry, the applicability area may extend to other analytes.

Enhanced Polymeric Carbon Nitride Nanosheet-Based Fluorescence for Biosensing Applications

Two-dimensional (2D) nanomaterials have been extensively used as quenching platforms of fluorescently labeled oligonucleotides for the design of biosensors. However, not all fluorophore-labeled single-stranded DNA (ssDNA) is necessarily quenched after they are adsorbed on the surface of 2D nanomaterials. Herein, we discovered that the fluorescence of tetramethylrhodamine (TMR)-labeled ssDNA was not quenched but enhanced by polymeric carbon nitride nanosheets (PCN NSs). Effects of the fluorophore, oligonucleotide sequence, and the number of proximal G bases on the fluorescence of fluorophore-labeled ssDNA were investigated in the presence of PCN NSs. The fluorescence enhancement phenomena were not observable for fluorescein- and X-rhodamine-labeled ssDNA and other 2D nanomaterials such as graphene oxide and MoS2 NSs. In the presence of PCN NSs, steric hindrance effect shields the photoinduced electron transfer quenching effect between TMR and proximal G bases, which may account for the fluorescence enhancement of TMR-labeled ssDNA adsorbed on PCN NSs. Benefiting from the fluorescence enhancement effect and the affinity change of PCN NSs to ssDNA probes upon hybridization with complementary ssDNA, a versatile ratiometric biosensing platform as a proof concept was demonstrated for the high sensitive fluorescence detection of ssDNA and microRNA.

Effect of DNA density immobilized on gold nanoparticles on nucleic acid detection.

Gold nanoparticles (AuNPs) have been utilized as colorimetric biosensors, where target molecule-induced AuNP aggregation can be recognized by a colour change from red to blue. Particularly, single-stranded DNA (ssDNA)-immobilized AuNPs (ssDNA-AuNPs) have been applied to genetic diagnosis due to their rapid and sequence-specific aggregation properties. However, the effect of the density of immobilized ssDNA have not been investigated yet. In this study, we developed a method to control the amount of immobilized ssDNA by use of ethylene glycol, which is expected to control the ice crystal spacing in a freezing-thawing ssDNA-AuNP synthesis method. We also investigated the effect of the DNA density on the sensitivity of the target ssDNA detection, and found that the detection sensitivity was improved at lower DNA densities. To discuss the reason for the improved detection sensitivity, we modified the ssDNA-AuNPs with alkane thiol for better dispersion stability against salt. The results suggest that the DNA density, rather than the dispersion stability, has a significant impact on detection sensitivity.

Microfluidic biosensor for one-step detection of multiplex foodborne bacteria ssDNA simultaneously by smartphone

As a major threat to food safety due to their pathogenicity, foodborne bacteria have received much attention. In this paper, we present a one-step and wash-free microfluidic biosensor platform by smartphone for simultaneous multiple foodborne bacteria target single-stranded DNA (ssDNA) detection. This technology is based on the fluorescence resonance energy transfer (FRET) between the graphene oxide (GO) and fluorescence molecules modified capture ssDNA of the target bacteria ssDNA (ctDNA) which were coated on the microfluidic chips. The fluorescence recovery was recorded by a smartphone fluorescent detector. With an optimal analytical performance, the platform realized the detection of four kinds of bacteria ssDNA simultaneously within 5 min, with the limits of detection (LODs) of 0.17, 0.18, 0.27, and 0.17 nM, respectively. And the throughput analysis of trace amounts of foodborne bacteria ssDNA in milk and water samples were successfully detected. This one-step and wash-free microfluidic biosensor can be used as a tool for food safety analysis.

High-Performance Circulating Tumor DNA Liquid Biopsy Based on Graphitic Carbon Nitride Nanosheet for Monitoring Gastric Cancer-Related Gene Mutations

Early diagnosis and timely monitoring of cancer progression are the most effective ways to improve the cure rate of cancer patients. And it is essential to create convenient, sensitive, accurate, as well as noninvasive or minimally invasive tests for better respecting patients’ wishes and optimizing diagnosis. The fluorescent biosensor discovered in our study on the basis of graphitic carbon nitride nanosheet (CNNS) could be used to detect the gastric cancer-associated circulating tumor DNA (ctDNA) in human blood by highly specific binding to fluorescein-labeled single-stranded DNA detection probes. The ssDNA detection probe was adsorbed on the surface of CNNS through weak Π–Π stacking, thereby obtaining efficient fluorescence quenching. With the presence of the target DNA, the ssDNA probe showed weak affinity for CNNS and restored fluorescence by base complementary pairing with target ssDNA through strong hydrogen bonds. The results show that the nanometer detection is a convenient, low-cost and high-efficiency technology, which is promising in biological detection and analysis.

CaZnO-based nanoghosts for the detection of ssDNA, pCRISPR and recombinant SARS-CoV-2 spike antigen and targeted delivery of doxorubicin

Overexpression of proteins/antigens and other gene-related sequences in the bodies could lead to significant mutations and refractory diseases. Detection and identification of assorted trace concentrations of such proteins/antigens and/or gene-related sequences remain challenging, affecting different pathogens and making viruses stronger. Correspondingly, coronavirus (SARS-CoV-2) mutations/alterations and spread could lead to overexpression of ssDNA and the related antigens in the population and brisk activity in gene-editing technologies in the treatment/detection may lead to the presence of pCRISPR in the blood. Therefore, the detection and evaluation of their trace concentrations are of critical importance. CaZnO-based nanoghosts (NGs) were synthesized with the assistance of a high-gravity technique at a 1,800 MHz field, capitalizing on the use of Rosmarinus officinalis leaf extract as the templating agent. A complete chemical, physical and biological investigation revealed that the synthesized NGs presented similar morphological features to the mesenchymal stem cells (MSCs), resulting in excellent biocompatibility, interaction with ssDNA- and/or pCRISPR-surface, through various chemical and physical mechanisms. This comprise the unprecedented synthesis of a fully inorganic nanostructure with behavior that is similar to MSCs. Furthermore, the endowed exceptional ability of inorganic NGs for detective sensing/folding of ssDNA and pCRISPR and recombinant SARS-CoV-2 spike antigen (RSCSA), along with in-situ hydrogen peroxide detection on the HEK-293 and HeLa cell lines, was discerned. On average, they displayed a high drug loading capacity of 55%, and the acceptable internalizations inside the HT-29 cell lines affirmed the anticipated MSCs-like behavior of these inorganic-NGs.

The cis configuration of amino-modified tetraphenylethene for selective detection of single-stranded guanine-rich DNA

The selectivity and sensitivity of amino-functionalized tetraphenylethene probes (namely Z-N2TPE and E-N2TPE) for ssDNA detection in aqueous solution were investigated. Both Z-N2TPE and E-N2TPE showed high selectivity to guanine-rich ssDNA. The sensitivity was found to be positively related to the DNA length, indicating the longer DNA could binding more probes to cause aggregation induced fluorescence. Z-N2TPE and E-N2TPE could detect guanine-rich ssDNA as short as 5 nt and 10 nt respectively. Theoretical simulation calculation shows that the amino group of the probe could simultaneously bind with guanine and phosphate ester, which contribute to high selectivity. And the cis probe could bind DNA with higher affinity than the trans one, since the two amino groups of Z-N2TPE could synergistically bind DNA while E-N2TPE could bind DNA with only one amino group.

Optimization of Surface-Enhanced Raman Spectroscopy Detection Conditions for Interaction between Gonyautoxin and Its Aptamer.

This study aimed to optimize the detection conditions for surface-enhanced Raman spectroscopy (SERS) of single-stranded DNA (ssDNA) in four different buffers and explore the interaction between gonyautoxin (GTX1/4) and its aptamer, GO18. The influence of the silver colloid solution and MgSO4 concentration (0.01 M) added under four different buffered conditions on DNA SERS detection was studied to determine the optimum detection conditions. We explored the interaction between GTX1/4 and GO18 under the same conditions as those in the systematic evolution of ligands by exponential enrichment technique, using Tris-HCl as the buffer. The characteristic peaks of GO18 and its G-quadruplex were detected in four different buffer solutions. The change in peak intensity at 1656 cm−1 confirmed that the binding site between GTX1/4 and GO18 was in the G-quadruplex plane. The relative intensity of the peak at 1656 cm−1 was selected for the GTX1/4–GO18 complex (I1656/I1099) to plot the ratio of GTX1/4 in the Tris-HCl buffer condition (including 30 μL of silver colloid solution and 2 μL of MgSO4), and a linear relationship was obtained as follows: Y = 0.1867X + 1.2205 (R2 = 0.9239). This study provides a basis for subsequent application of SERS in the detection of ssDNA, as well as the binding of small toxins and aptamers.

Rapid and ultrasensitive detection of DNA and microRNA-21 using a zirconium porphyrin metal-organic framework-based switch fluorescence biosensor

Sensitive and accurate detection of nucleic acid biomarkers is critical for early cancer diagnosis, disease monitoring, and clinical treatment. In this study, we developed a switch fluorescence biosensor for simple and high-efficient detection of nucleic acid biomarkers using 6-carboxyfluorescein (FAM)-modified single-stranded DNA (ssDNA) probes (FAM-P1/P2), and zirconium porphyrin metal-organic framework nanoparticles (ZrMOF) acted as fluorescence quencher. FAM-P1/P2 probes were adsorbed on ZrMOF surface because of π-π stacking, hydrogen bonding, and electrostatic interactions. Fluorescence quenching event occurred by fluorescence resonance energy transfer (FRET) and photo-induced electron transfer (PET) processes, thereby achieving the “off” fluorescence status. Once the specific binding was formed between the fluorescence probes and the targets, the rigid double-stranded DNA (dsDNA) structures were released from ZrMOF surface, resulting in the recovery of fluorescence and the “on” status. Because of the superior adsorption ability of ZrMOF toward ssDNA than dsDNA, the switch of fluorescence signals from “off” to “on” allowed rapid and ultrasensitive detection of ssDNA (T1) and microRNA-21 (miR-21) within 30 min. The limit of detection (signal-to-noise ratio = 3) for T1 and miR-21 were 2 fM and 11 aM, respectively. Moreover, the proposed strategy was very simple as it worked by the facile adsorption-quenching-recovery mechanism without difficult and complicated immobilization processes. Also, this biosensor showed an excellent analytical performance in the detection of miR-21 in human serum samples. Therefore, this biosensor might be considered a potential tool for the detection of DNA and miRNA biomarkers in clinical samples.

A comparative study of different types of sandwiched structures of SPR biosensor for sensitive detection of ssDNA

Graphene and other 2D materials have attracted many scientific communities due to excellent performance in the area of SPR biosensor. In this paper, we propose SPR biosensors for the detection of ssDNA using hybrid structure of different 2D materials in Kretschmann configuration. Further, we compare eight different types of configurations using silver (Ag), graphene, gold (Au) and transition metal dichalcogenides (TMDCs) in terms of various sensing performance parameters such as sensitivity (S), detection accuracy (D. A) and quality factor (Q. F). The schematic study of different configurations indicates that introduction of graphene, WS2 and MoS2 increase the sensing performances as compare to the conventional SPR biosensor. In our proposed structures, maximum sensitivity occurs for monolayer graphene, bilayer WS2 and monolayer MoS2 combination. In this case, maximum obtained sensitivity is 203 deg./RIU with detection accuracy 1.13 and quality factor 28.31 RIU−1. This analysis shows that heterostructure SPR biosensor with sandwiched graphene layer, consisting of bimetallic layers of TMDCs, enhances the sensing performance as compare to the other reported works which comprised of graphene and 2D materials. Therefore, our proposed SPR biosensor may have potential applications in medical diagnostic for biochemical detection and open a new dimension in the field of biosensing.

Coupling smartphone and CRISPR–Cas12a for digital and multiplexed nucleic acid detection

AbstractAccurate, rapid, and multiplexed nucleic acid detection is of great value for applications in biomedicine and agriculture. Here, we demonstrated a one‐step Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) diagnostic method for the digital and multiplexed detection of both single‐stranded (ss) and double‐stranded (ds) DNA on a handheld smartphone device. ssDNA targets exhibited faster reaction kinetics of this single‐step CRISPR–Cas12a assay than dsDNA counterparts. Under optimized conditions, picomolar levels of ssDNA targets can be detected in 96‐well plates by using a benchtop plate reader. The detection sensitivity can be further improved to 5 fM when running the reaction in a microwell‐based digital assay chip. Multiplexed detection of hepatitis B virus and human papillomavirus DNA markers was demonstrated on the smartphone‐based platform. Finally, the one‐step CRISPR–Cas12a assay performed robustly in human serum samples with a recovery rate of ssDNA detection between 96% and 105.6%, suggesting a high potential for clinical diagnostic applications in point‐of‐care settings.

Discriminatory Detection of ssDNA by Surface-Enhanced Raman Spectroscopy (SERS) and Tree-Based Support Vector Machine (Tr-SVM).

We report label-free detection of 86-base single-stranded DNA (ssDNA) gene segments by surface-enhanced Raman spectroscopy (SERS). The use of a slippery liquid infused porous (SLIP) membrane induced aggregation of 43 nm gold nanoparticles and ssDNA upon pin-free droplet evaporation. The combined SLIPSERS approach generates significant numbers of SERS hot-spots and enabled detection at the 100 nM level of mecA and intI1 gene segments-two genes of interest in the context of antibiotic resistance. Tree-based multiclass support vector machine (Tr-SVM) classifiers were built to discriminate SERS spectra of 12 different gene sequences obtained by SLIPSERS: mecA, intI1, as well as analogues of mecA and intI1, respectively, with 2-10 base mismatches, and two random sequences. The trained predictive Tr-SVM classifiers correctly identified each gene sequence with a prediction accuracy of ∼90%. This study illustrates a novel means for discriminatory label-free SERS detection of ssDNA enabled by Tr-SVM.

Naked-eye detection of site-specific ssRNA and ssDNA using PAMmer-assisted CRISPR/Cas9 coupling with exponential amplification reaction

Accurate and effective detection of single-stranded nucleic acids is vital in both disease diagnosis and pathological studies. Hence, we develop a PAMmer-assisted CRISPR/Cas9 system mediated G4-EXPAR (Cas-G4EX) strategy for site-specific detection of ssRNA and ssDNA. PAMmer-assisted CRISPR/Cas9 executes the site-specific cleavage of target ssRNA or ssDNA and released product fragment with the desired sequence at the 3′-terminal. This fragment serves as a primer to activate subsequent sequence-dependent exponential amplification reaction (EXPAR). The G-rich EXPAR products assembles with hemin to form a G-Quadruplex (G4/hemin). G4/hemin catalyzes ABTS-H2O2 system with the appearance of vivid green color, realizing naked-eye analysis. Cas-G4EX integrates the superiority of CRISPR/Cas9 and EXPAR, presenting outstanding site-specific recognition and high-performance amplification efficiency. Meanwhile, the programmability of CRISPR/Cas9 system makes the proposed method become a universal detection paradigm for any ssRNA or ssDNA. Cas-G4EX assay shows the linear relationship from 250 aM to 2.5 nM for ssRNA detection with the actual LOD of 250 aM, and that ranges from 100 aM to 1 nM for ssDNA detection with the actual LOD of 100 aM. Additionally, the acceptable recoveries of 101.48%–109.61% for ssRNA and 93.25%–111.98% for ssDNA in real detection of human serum are obtained for detection of single-strand nucleic acid in real samples. Cas-G4EX also exhibits the excellent discrimination for single-base mutation of single-stranded nucleic acids. Therefore, Cas-G4EX assay provides a promising platform in the applications of molecular diagnosis and pathological analysis.

CRISPR-ENHANCE: An enhanced nucleic acid detection platform using Cas12a.

Rapid detection of nucleic acids is essential for clinical diagnosis of a wide range of infectious and non-infectious diseases. CRISPR-based diagnostic platforms are well-established for rapid and specific detection of nucleic acids but suffer from a low detection sensitivity without a target pre-amplification step. Our recently developed detection system, called CRISPR-ENHANCE, employs engineered crRNAs and optimized conditions to achieve a significantly higher sensitivity and enable femtomolar levels of nucleic acid detection even without target pre-amplification. Using the CRISPR-ENHANCE platform and following the methodology detailed in this paper, nucleic acid detection for low copy numbers can be achieved in less than an hour through either a fluorescence-based detection or a lateral flow assay. The step-by-step instructions provided, in addition to describing how to perform both assays, incorporate details on a LAMP/RT-LAMP-based target amplification step to enable detection of RNA, ssDNA and dsDNA. Furthermore, a protocol for in-house expression and purification of LbCas12a using CL7/lm7-based affinity chromatography, which has been used to achieve a high yield and purity of the enzyme in a single-step, is provided.

Reprogrammable Gel Electrophoresis Detection Assay Using CRISPR-Cas12a and Hybridization Chain Reaction.

Hybridization chain reaction (HCR) is a DNA-based target-induced cascade reaction. Due to its unique enzyme-free amplification feature, HCR is often employed for sensing applications. Much like DNA nanostructures that have been designed to respond to a specific stimulus, HCR employs nucleic acids that reconfigure and assemble in the presence of a specific trigger. Despite its standalone capabilities, HCR is highly modular; therefore, it can be advanced and repurposed when coupled with latest discoveries. To this effect, we have developed a gel electrophoresis-based detection approach which combines the signal amplification feature of HCR with the programmability and sensitivity of the CRISPR-Cas12a system. By incorporating CRISPR-Cas12a, we have achieved greater sensitivity and reversed the signal output from TURN OFF to TURN ON. CRISPR-Cas12a also enabled us to rapidly reprogram the assay for the detection of both ssDNA and dsDNA target sequences by replacing a single reaction component in the detection kit. Detection of conserved, both ssDNA and dsDNA, regions of tobacco curly shoot virus (TCSV) and hepatitis B virus (HepBV) genomes is demonstrated with this methodology. This low-cost gel electrophoresis assay can detect as little as 1.5 fmol of the target without any additional target amplification steps and is about 100-fold more sensitive than HCR-alone approach.