Detection Of Oxidative Stress Biomarker Research Articles

Transcriptomic analysis of oxidative stress mechanisms induced by acute nanoplastic exposure in Sepia esculenta larvae.

Nanoplastics (NPs), as a new type of pollutant with a size small than 1μm, are ubiquitous and harmful to organisms. There has been an increasing amount of research concerning the effects of NPs on organisms over recent years, especially on aquatic animals. However, there is a limited study on the impact of NPs on mollusk cephalopods. In this research, Sepia esculenta, belonging to Cephalopoda, Coleoidea, Sepioidea, was selected to explore the effects caused by NPs exposure. The S. esculenta larvae were exposed to polystyrene NPs (PS-NPs) with diameter 50nm (100mg/L) for 4h. The detection of oxidative stress biomarkers displayed an obvious increase in SOD (superoxide dismutase) activity and MDA (malondialdehyde) level. Then, RNA-Seq was performed to explore the oxidative stress response at mRNA level. The transcriptome analysis demonstrated that the expression of 2,570 genes was affected by PS-NPs. Besides, the signaling pathways of ribosome, ribosome biogenesis in eukaryotes, proteasome, and MAPK were enriched. This study not only provides novel references for understanding the mechanisms of oxidative stress response induced by NPs, but also reminds us to follow with interest the influence of acute exposure to NPs.

Electrochemical approaches based on micro- and nanomaterials for diagnosing oxidative stress.

This review article comprehensively discusses the various electrochemical approaches for measuring and detecting oxidative stress biomarkers and enzymes, particularly reactive oxygen/nitrogen species, highly reactive chemical molecules, which are the byproducts of normal aerobic metabolism and can oxidize cellular components such asDNA, lipids, and proteins. First, we address the latest research on the electrochemical determination of reactive oxygen species generating enzymes, followed by detection of oxidative stress biomarkers, and final determination of total antioxidant activity (endogenous and exogenous). Most electrochemical sensing platforms exploited the unique properties of micro- and nanomaterials such as carbon nanomaterials, metal or metal oxide nanoparticles (NPs), conductive polymers and metal-nano compounds, which have been mainly used for enhancing the electrocatalytic response of sensors/biosensors. The performance of the electroanalytical devices commonly measured by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in terms of detection limit, sensitivity, and linear range of detection is also discussed. This article provides a comprehensive review of electrode fabrication, characterization and evaluation of their performances, which are assisting to design and manufacture an appropriate electrochemical (bio)sensor for medical and clinical applications. The key points such as accessibility, affordability, rapidity, low cost, and high sensitivity of the electrochemical sensing devices are also highlighted for the diagnosis of oxidative stress. Overall, this review brings a timely discussion on past and current approaches for developing electrochemical sensors and biosensors mainly based on micro and nanomaterials for the diagnosis of oxidative stress.

Coral reef-like zinc niobate nanostructures decorated functionalized carbon nanofiber as electrode modifier for detection of oxidative stress biomarker: 3-nitro-L-tyrosine

Oxidative stress can transform immunologic disorders to malignancy by enhancing the effect of pathogenic factors associated with adverse health problems. Biomarkers generated during oxidative stress are essential in assessing the in vivo condition of the cell for evaluating health and diagnosing the disease at an early stage, prognosis, benign and effectual drug development, and testing the drug efficacy. 3-Nitro-L-tyrosine is an oxidative stress biomarker produced from L-tyrosine through nitration mediated by active metabolites. Thus, precise detection of 3-NO2-Tyr in the biological medium is significantly important to monitor the cell environment. Consequently, a novel electrochemical sensing platform had been designed using ZnNb2O6 nanostructures anchored f-CNF as a glassy carbon electrode modifier. The crystalline and structural features, morphology, and elemental composition of ZnNb2O6/f-CNF nanocomposite were keenly verified. The synchronic activation of ZnNb2O6/f-CNF nanocomposite for effective detection of 3-NO2-Tyr is mainly due to the synergic effect between its counterparts. Accordingly, the fabricated sensor possesses a remarkably low limit of detection (0.021 μM) with a good linear range, and sensitivity is noted to be 7.745 μA/μM⋅cm⁻2. The consistency of this sensor was evinced through real-time monitoring of 3-NO2-Tyr in urine and saliva samples which is beneficial in monitoring the pathological situation.

Advancements in 2D Materials Based Biosensors for Oxidative Stress Biomarkers

The imbalance in generation of reactive oxygen species and its depletion causes oxidative stress. Because of its importance, there is a need to explore the role of oxidative stress biomarkers. The limitations of the conventional methods cause the researchers look for other alternatives. Biosensors are highly promising candidates for the detection of trace quantities for various analytes with high specificity, selectivity, and quick response time. Nanomaterial based matrices are the most popular choice while fabricating a biosensor. Two-dimensional (2D) materials such as graphene, transitional metal dichalcogenides, and various metal oxides have been used for the biosensing of different oxidative stress analytes. High electron mobility, good optical properties, tunable properties, high yields, easy synthesis, and availability make these materials the first choice. In this review, we have comprehensively discussed various biomarkers associated with oxidative stress. The review will provide information related to different kinds and various synthesis procedures employed for 2D nanomaterials. The major focus of the review is to elaborate the role of 2D nanomaterial based structures for the optical and electrochemical methods for the detection of oxidative stress. This review is an effort to help the researchers better understand various 2D based transducers available for the detection of oxidative stress biomarkers.

An Ultra-sensitive Electrochemical Sensor for the Detection of Oxidative Stress Biomarker 3-Nitro-l-tyrosine in Human Blood Serum and Saliva Samples Based on Reduced Graphene Oxide Entrapped Zirconium (IV) Oxide

A sonochemical assisted preparation of zirconium dioxide (ZrO2) sheathed reduced graphene oxide (ZrO2@rGO NCs) nanocomposites as the highly sensitive electrode material for the detection of oxidative stress biomarker 3-Nitro-l-tyrosine (3-NT) was reported. The formation of prepared ZrO2@rGO NCs and its surface morphology were scrutinized by the X-ray photoelectron spectroscopy (XPS) and Field emission scanning electron microscope (FE-SEM). Moreover, the as-prepared nanocomposites were fabricated on the glassy carbon electrode (GCE), and its electrochemical performance towards the detection of 3-NT are studied by the various electrochemical techniques such as Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and amperometric (i-t). The excellent conductivity of the rGO and the electrocatalytic properties of the ZrO2 significantly improves the electrochemical performances. As a result, the ZrO2@rGO NCs display the LOD of 9 nM with the covering range of 0.025 to 855.2 μM towards the detection of 3-NT. Finally, the real-time practicability of ZrO2@rGO NCs in the spiked human serum and saliva samples also investigated, which shows the feasible found and recoveries. Hence, this study sonochemically prepared ZrO2@rGO NCs provides the simple, rapid and efficient towards the detection of 3-NT in biological samples.

One-pot sonochemical synthesis of Bi2WO6 nanospheres with multilayer reduced graphene nanosheets modified electrode as rapid electrochemical sensing platform for high sensitive detection of oxidative stress biomarker in biological sample

4-Nitroquinoline N-oxide (4-NQO) is an important tumorigenic organic compound with high adverse effect in the human body. In this study, a novel Bismuth Tungstate nanospheres (Bi2WO6) decorated reduced graphene oxide (Bi2WO6/rGOS) nanocomposite have been designed through a sonochemical method. The as-synthesized Bi2WO6/rGOS was characterized through the HRTEM, FESEM, XPS, EIS and XRD. Furthermore, the nanocomposite modified glassy carbon electrode (GCE) was developed for the determination of 4-NQO. The results showed that the Bi2WO6/rGOS nanocomposite modified electrode exhibit valuable responses and excellent electrocatalytic activity. The fabricated sensor was facilitated the analysis of 4-NQO with a nanomolar detection limit (6.11 nM). Further, the as-synthesized Bi2WO6/rGOS modified electrode has been applied to sensing of 4-NQO in human blood and urine samples with satisfactory recovery.

Ultra-sensitive electrochemical detection of oxidative stress biomarker 8-hydroxy-2′-deoxyguanosine with poly (L-arginine)/graphene wrapped Au nanoparticles modified electrode

An innovative electrochemical sensor assembly relying on a simple “green” electrochemical reduction route is presented for the sensitive detection of 8-hydroxy-2′-deoxyguanosine (8-OHdG), the most abundant oxidative product of DNA. The sensing film consisted of poly (L-arginine) and graphene wrapped Au nanoparticles was fabricated on glassy carbon electrode (GCE/P-Arg/ErGO-AuNPs) using subsequent ‘layer-by-layer’ regime through electrochemical technique. The proposed method was also successfully applied for the quantification of 8-OHdG in the presence of interfering biomolecules like ascorbic acid and uric acid. Scanning electron microscopy (SEM) was utilized to characterize the surface morphology of the composite electrode. Electrochemical characterizations of the bare and modified electrodes were carried out via cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). According to differential pulse voltammetry (DPV) results, there were linear relationships between the peak currents and the concentrations in the ranges of 1.0–100 nM (R2 = 0.996), and 0.5–10 µM (R2 = 0.990), with a detection limit (S/N = 3) of 1.0 nM. Furthermore, the proposed sensor was successfully applied for the determination of target analyte in human urine samples and a very high recovery percentage was obtained.

Luminescent Device for the Detection of Oxidative Stress Biomarkers in Artificial Urine.

A luminescent paper-based device for the visual detection of oxidative stress biomarkers is reported. The device consists of a polyvinylidene fluoride membrane impregnated with poly(3-alkoxy-4-methylthiophene) (PT) for colorimetric detection. 8-hydroxy-2'-deoxyguanosine (8-OHdG), a biomarker associated with oxidative stress, is used as a model system for validating the proposed methodology. The detection strategy is based on monitoring the changes in optical properties of PT associated with its conformational changes upon interaction with an aptamer in the presence and in the absence of 8-OHdG. Fluorometric and colorimetric monitoring revealed linear responses for 8-OHdG concentrations between 50 pM and 500 nM (∼14 pg/mL to 140 ng/mL), with limits of detection of ∼300 pM and ∼350 pM, respectivelyfor ( n = 3). Colorimetric responses in artificial urine ascertained rapid, sensitive, and selective detection of 8-OHdG at clinically relevant (pM to nM) concentration levels. Furthermore, the proposed methodology enables point-of-care diagnostics for oxidative stress without requiring sophisticated instrumentation.

Hierarchically structured CuFe2O4 ND@RGO composite for the detection of oxidative stress biomarker in biological fluids

In this work, stable and catalytically active copper ferrite nanodots (CuFe2O4) entrapped by porous RGO nanosheets were prepared via a facile condensation process using a green reducing agent.

Paper-Based Sensing Device for Electrochemical Detection of Oxidative Stress Biomarker 8-Hydroxy-2\u2032-deoxyguanosine (8-OHdG) in Point-of-Care

This work presents a cost-effective, label-free in point-of-care (POC) biosensor for the sensitive detection of 8-hydroxy-2′-deoxyguanosine (8-OHdG), the most abundant oxidative product of DNA, that may allow a premature assessment of cancer disease, thereby improving diagnosis, prognostics and survival rates. The device targets the direct detection of 8-OHdG by using for the first time a carbon-ink 3-electrode on a paper substrate coupled to Differential Pulse Voltammetry readings. This design was optimized by adding nanostructured carbon materials to the ink and the conducting polymer PEDOT, enhancing the electrocatalytic properties of the sensor towards 8-OHdG detection. Meanwhile, the ability of this oxidative stress biomarker to undertake an oxidation reaction enabled the development of the sensing electrochemical device without the need of chemical probes and long incubation periods. This paper-modified sensor presented high electrochemical performance on the oxidation of 8-OHdG with a wide linear range (50–1000 ng/ml) and a low detection limit (14.4 ng/ml). Thus, our results showed the development of a direct and facile sensor with good reproducibility, stability, sensitivity and more importantly, selectivity. The proposed carbon-based electrochemical sensor is a potential candidate to be miniaturized to small portable size, which make it applicable for in-situ 8-OHdG sensing in real biological samples.

Multi-target detection of oxidative stress biomarkers in quercetin and myricetin treated human red blood cells

Quercetin and myricetin help against oxidative stress in human red blood cells during aging, thereby has tremendous scope in medical diagnostics and therapeutics.

Detection of oxidative stress biomarkers in myricetin treated red blood cells

Effect of myricetin on RBC membrane enzymes (Na+, K+-ATPase and Ca2+-ATPase) and Na+, H+exchanger.

Immunohistochemical Detection of Oxidative Stress Biomarkers, Dityrosine and N&sup.EPSILON.;-(hexanoyl)lysine, and C-Reactive Protein in Rabbit Atherosclerotic Lesions

Several lines of evidence have demonstrated that C-reactive protein (CRP) is associated with oxidative stress; however, the precise co-localization between CRP and oxidative stress markers in atherosclerotic lesions is not fully established. In this study, we focused on two oxidative stress markers, dityrosine (DY) and N(epsilon)-(hexanoyl)lysine (HEL), which had not previously been investigated in relation to CRP in atherosclerotic lesions. We investigated the production and localization of DY, HEL, and CRP in early-stage and moderately progressed fatty lesions of cholesterol-fed rabbits by immunohistochemistry using specific monoclonal antibodies to examine the co-localization between CRP and oxidative stress in atherosclerotic lesions. Rabbit atherosclerotic specimens were obtained from New Zealand White rabbits fed a diet containing 1.0% cholesterol for 12 weeks. All specimens were fixed in formalin for histological examinations. CRP-positive cells in rabbit early-stage and moderately progressed fatty lesions were detected mostly in the macrophage-derived foam cell-rich areas. Both DY and HEL were also detected in foam cell-rich areas in both lesions, where they were primarily co-localized with CRP-positive cells. Our results suggest that the generation of oxidative stress markers, DY and HEL, may be mediated by CRP in atherosclerotic lesions, and that CRP may be associated with oxidative stress in rabbit atherosclerotic lesions.