Detection Of Defects In Materials Research Articles

Dual-Modal Illumination System for Defect Detection of Aircraft Glass Canopies.

Defect detection in transparent materials typically relies on specific lighting conditions. However, through our work on defect detection for aircraft glass canopies, we found that using a single lighting condition often led to missed or false detections. This limitation arises from the optical properties of transparent materials, where certain defects only become sufficiently visible under specific lighting angles. To address this issue, we developed a dual-modal illumination system that integrates both forward and backward lighting to capture defect images. Additionally, we introduced the first dual-modal dataset for defect detection in aircraft glass canopies. Furthermore, we proposed an attention-based dual-branch modal fusion network (ADMF-Net) to enhance the detection process. Experimental results show that our system and model significantly improve the detection performance, with the dual-modal approach increasing the mAP by 5.6% over the single-modal baseline, achieving a mAP of 98.4%. Our research also provides valuable insights for defect detection in other transparent materials.

Building Material Defect Detection and Diagnosis Method Based on Big Data and Deep Learning

Building Material Defect Detection and Diagnosis Method Based on Big Data and Deep Learning

Enhanced Scratch Detection for Textured Materials Based on Optimized Photometric Stereo Vision and Fast Fourier Transform–Gabor Filtering

In the process of scratch defect detection in textured materials, there are often problems of low efficiency in traditional manual detection, large errors in machine vision, and difficulty in distinguishing defective scratches from the background texture. In order to solve these problems, we developed an enhanced scratch defect detection system for textured materials based on optimized photometric stereo vision and FFT-Gabor filtering. We designed and optimized a novel hemispherical image acquisition device that allows for selective lighting angles. This device integrates images captured under multiple light sources to obtain richer surface gradient information for textured materials, overcoming issues caused by high reflections or dark shadows under a single light source angle. At the same time, for the textured material, scratches and a textured background are difficult to distinguish; therefore, we introduced a Gabor filter-based convolution kernel, leveraging the fast Fourier transform (FFT), to perform convolution operations and spatial domain phase subtraction. This process effectively enhances the defect information while suppressing the textured background. The effectiveness and superiority of the proposed method were validated through material applicability experiments and comparative method evaluations using a variety of textured material samples. The results demonstrated a stable scratch capture success rate of 100% and a recognition detection success rate of 98.43% ± 1.0%.

Phased Array Ultrasonic Inspection of Composite Fuselage Panel

Abstract The composite fuselage panel is a crucial component in large civil aircraft, necessitating higher detection rates and efficiency. Phased array ultrasonic testing can enhance the efficiency and defect detection rate; however, it is essential to consider the structural characteristics of the fuselage to ensure reliable identification of design defects. Based on the material properties, structural features, and defect detection requirements of composite fuselage panels, a test block reflecting their characteristics was designed and fabricated with various prefabricated defects. Ultrasonic phased array method was employed for a series of testing parameter optimization experiments and defect detectability analysis. The detected flaws were quantitatively analyzed and compared with those obtained using conventional ultrasonic automatic scanning techniques to validate the effectiveness of the developed ultrasonic phased array method. The feasibility of utilizing phased array ultrasonics for nondestructive evaluation of wide-body airliner composite fuselage panels is confirmed.

Automatic segmentation of microporous defects in composite film materials based on the improved attention U-Net module

ABSTRACT Composite film materials offer several advantages, such as high strength-to-weight ratios, flexibility, durability, or cost-effectiveness, which make them ideal for a wide range of applications across various industries. However, microporous defects in the material compromise its durability and air-tightness. Thus far, few works have been performed on inquiring non-destructive testing methods intended for the detection of microporous defects in composite film materials. In this study, the automatic detection of microporous defects is achieved by using a thermal imaging inspection system developed on the basis of a laser infrared system and the U-Net. Innovatively, an improved attention module is added to U-Net to boost its detection performance. While using a laser as a heat source, a fibre laser beam shaper is chosen as the laser beam expansion to ensure a uniform intensity distribution of the laser beam within a small heating area. Experimental results show that the proposed method can reliably detect microporous defects in the composite film materials with sizes in the order of millimeters/micrometers.

Two-dimensional Hilbert-Huang transform-based thermographic data processing for non-destructive material defect detection

ABSTRACT Previous research has established the Hilbert-Huang transform (HHT) as a powerful tool for processing and analysing one-dimensional time series signals. Its extension into multi-dimensional Euclidean spaces further demonstrates its versatility. In this study, we leverage a two-dimensional (2D) HHT to enhance non-destructive testing, utilising active infrared thermographic data to improve the detection of material defects. The proposed methodology incorporates a 2D HHT, which synergises multidimensional ensemble empirical mode decomposition with the Riesz transform (RT). This combination is adept at uncovering both global (i.e. intrinsic mode functions) and local (i.e. phase angle and spatial frequency) information. In particular, RT is integrated with a Gaussian filter, which allows for a more thorough analysis of the inherent characteristics of defects through the monogenic signal produced by RT. The experimental application of this method on a mosaic sample, intentionally embedded with defects, has yielded promising results. The approach effectively distinguishes critical defect signals from the surroundings, leading to more accurate and clearer results.

Magneto acoustic emission technique: A review of methodology, applications, and future prospects in non-destructive testing

The magneto acoustic emission (MAE) technique is an emerging non-destructive testing (NDT) method that has shown potential for defect detection in the bulk of material, proven vital for the safety and integrity of the material. The MAE technique has shown promising results among modern non-destructive testing techniques for ferromagnetic materials. Although MAE technique is a long-established NDT method, it has the potential for further development. This paper provides an in-depth review of MAE signals' physical origin and characteristics, compares them with their counterpart, Magneto Barkhausen Noise (MBN), and explores data acquisition methods and applications, including specific case studies in material defect detection. The research gaps in the MAE technique are discussed, and the paper explores potential developments, highlighting future perspectives and possible improvements.

Enhancing defect detection in solid materials using low-duty cycle square wave lock-in thermography: a time-efficient and quantitative approach

Lock-in thermography has been used to detect material defects but has faced challenges in quantitatively identifying defects. Traditional methods with a sine wave or symmetrical square wave heat source require time-consuming frequency adjustments with multiple experiments. This study introduces a novel technique using a heat source of a low-duty cycle square wave in lock-in thermography. This harmonic-rich heat source provides information on the blind frequency and the depth of defects, significantly reducing testing time. This method was validated by finite element simulations, which generated phase maps and phase difference-frequency curves at multiple frequencies that located defects. The study explored the correlation between thermal diffusion length at the blind frequency and defect depth and the impact of transverse thermal diffusion on depth measurement. The findings indicate that phase maps at the optimal frequency are most suitable for measuring defect edges. This approach offers a promising, time-efficient, and quantitative solution for defect detection.

PECT Composite Defect Detection Algorithm Based on DualGAN

To address the problems of insufficient accuracy and slow reconstruction speed of Planar Electrical Capacitance Tomography (PECT) detection of damaged specimens, a Dual Generative Adversarial Networks (DualGAN)-based PECT image defect detection method is proposed in this paper. The improved particle swarm algorithm with adaptive particle number and L2-norm is used to optimize the sensitivity field, combined with the parallel Landweber algorithm to solve the PECT inverse problem to obtain the dielectric constant distribution map. In the DualGAN network, the Unet generator utilizes an Adam-based local attention mechanism to adjust module weights, facilitating feature extraction and the generation of high-quality transformation images of the Landweber dielectric constant distribution. A PatchGAN discriminator is employed to distinguish between transformation images and real images, using the generated transformation images as target images. Experimental results demonstrate that the sensitivity field, enhanced by the improved particle swarm algorithm and L2-norm normalization, achieves better balance. Furthermore, the addition of a network transformation using the Adam-based local attention weight mechanism on the DualGAN network reduces artifacts in the reconstructed images, resulting in more accurate PECT reconstructions. The PECT image defect detection method, integrating DualGAN, an improved particle swarm optimization algorithm, and a local attention mechanism, has made significant strides in addressing challenges related to image reconstruction accuracy and speed. This technological advancement has enhanced the precision and efficiency of defect detection in carbon fiber composite materials, thereby fostering the broader utilization of planar capacitance tomography technology in industrial damage detection and material defect analysis.

A lightweight image-level segmentation method for steel surface defects based on cross-layer feature fusion

Steel is widely used in the aerospace, machinery and automotive industries. Surface defects not only have a negative impact on the appearance of steel but also significantly reduce its wear resistance, high temperature resistance, corrosion resistance and fatigue strength. Therefore, the detection of steel surface defects is very important to improve the quality of steel production. The limited availability of surface defect samples in the industrial sector poses significant challenges for the accurate detection of defects in high-quality materials. In addition, the existing defect detection model is highly complex and not easy to deploy. To solve this problem, a lightweight defect detection network suitable for steel defects is proposed. The cross-layer feature fusion (CFF) in the design enables effective utilisation of multi-layer semantic features, facilitating the detection of small defects in steel. Secondly, a new loss function is designed to make up for the problems of small data volume and uneven data distribution. The experimental results demonstrate that the steel surface defect detection method proposed in this paper achieves the highest detection performance on widely used public datasets such as RSDDS, NEUS and NRSD-CR(test), while maintaining the lowest model complexity.

Detection and characterisation of defects in composite materials using microwave non-destructive testing methods

This paper proposes a technique for detecting impact-induced surface and subsurface fractures in Glass Fibre Reinforced Composites (GFRPs) and hybrid composite materials. Various categories of composite samples, namely Unidirectional GFRP, Bidirectional GFRP, Woven mat GFRP and Carbon-flax hybrid composites are fabricated by the hand-layup process, and cracks are induced in the samples by three-point flexural bending test using a Universal Testing Machine. Near-field microwave Non-Destructive Testing (NDT) is employed in detecting the above cracks by recording the S11 parameter from the microwave transceiver probe throughout the sample. For image rendering the resulting outputs are passed as a 2-dimensional array to the image-rendering algorithms, namely Iterative Curve-Based Interpolation (ICBI), Improved New Edge-Directed Interpolation (INEDI) and the Lanczos algorithm. The most suitable algorithm to identify the clear picture and size of crack is identified, and the effectiveness of Microwave NDT for these composites is analysed.

Rapid testing in the food industry: the potential of Fourier transform near-infrared (FT-NIR) spectroscopy and spatially offset Raman spectroscopy (SORS) to detect raw material defects in hazelnuts (Corylus avellana L.)

The detection of raw material defects, e.g., due to incorrect or excessively long storage, is an important issue in incoming goods inspections in the food industry. Fast and easy-to-use analytical methods for evaluating the usability of raw materials are particularly important. In this study, the applicability of Fourier transform near-infrared (FT-NIR) spectroscopy and spatially offset Raman spectroscopy (SORS) for the detection of raw material defects was evaluated. For this purpose, six hazelnut batches stored at different temperatures, humidity levels, and storage times were used as examples in this pilot study. Classification models of samples before and after the different physical treatments show that the resulting changes can be detected by FT-NIR spectroscopy and SORS at elevated temperature and humidity. When one of the storage parameters is increased, FT-NIR spectroscopy is also useful for detecting differences between sample groups. In contrast, SORS cannot distinguish between pre- and post-stored samples when only one of the storage parameters is increased, making SORS unsuitable for incoming inspection of nuts. FT-NIR spectroscopy analysis is also a fast application, because freeze-drying of the sample material prior to analysis is not required as the results before and after freeze-drying are comparable. Combining the FT-NIR spectroscopy and SORS data in a low-level data fusion improved the classification models for samples stored at low storage temperatures, suggesting that the two methods provide complementary information. In summary, analyzing nuts with FT-NIR spectroscopy and SORS, as shown for hazelnuts, has the potential to identify abnormal samples during incoming goods inspections.

Machine learning-enhanced detection of minor radiation-induced defects in semiconductor materials using Raman spectroscopy

Radiation damage in semiconductor materials is a crucial concern for electronic applications, especially in the fields of space, military, nuclear, and medical electronics. With the advancements in semiconductor fabrication techniques and the trend of miniaturization, the quality of semiconductor materials and their susceptibility to radiation-induced defects have become more important than ever. In this context, machine learning (ML) algorithms have emerged as a promising tool to study minor radiation-induced defects in semiconductor materials. In this study, we propose a sensitive non-destructive technique for investigating radiation-induced defects using multivariate statistical analyses combined with Raman spectroscopy. Raman spectroscopy is a contactless and non-destructive method widely used to characterize semiconductor materials and their defects. The multivariate statistical methods applied in analyzing the Raman spectra provide high sensitivity in detecting minor radiation-induced defects. The proposed technique was demonstrated by categorizing 100–500 kGy irradiated GaAs wafers into samples with low and high irradiation levels using linear discrimination analysis ML algorithms. Despite the high similarity in the obtained Raman spectra, the ML algorithms correctly predicted the blind testing samples, highlighting the effectiveness of ML in defect study. This study provides a promising approach for detecting minor radiation-induced defects in semiconductor materials and can be extended to other semiconductor materials and devices.

Material management in automobile industry: Era 4.0

Nowadays, a lot of places worldwide are using Industry 4.0 technology. Smart manufacturing, supply chains, warehousing, logistics, and materials are all developed with the usage of these technologies, especially in automobile sector. It can potentially resolve complex production issues from a commercial perspective. Industry 4.0 technologies that are available for enhancing manufacturing procedures and material quality of automobile industry are thoroughly examined in this article. In the upcoming era of vehicles, we have enumerated the several technologies that are currently available, together with their attributes and advantages for efficient management. Automobile businesses may optimise their inventory and material waste with the use of digital technologies, which lowers costs. When necessary, employees who are located on different sites can work together with ease due to remote collaboration. By helping them stay current with knowledge, these tools eventually close communication barriers. Proper equipment monitoring in industries utilising Industry 4.0 technology will be aided by smart predictive analysis. Early detection and resolution of material defects is possible with the help of these advance technologies. Additionally, this meets the customer's expectations and offers transparency in the systems and procedures.

Automated Detection of Material Defects for High-throughput Electron Micrographs Analysis

Automated Detection of Material Defects for High-throughput Electron Micrographs Analysis

Noise and distortion suppression for industrial confocal microscopy

Industrial confocal microscopy is an optical imaging measurement technology used in the fields of material research, defect detection and industrial inspection. Noise will affect the quality of the image and thus affect its performance. We propose a denoising algorithm based on CNN minimisation in this paper. First, we give the object function of the algorithm and the adaptive calculation formula of the capped value. Then, by using the difference convex (DC) optimisation algorithm framework, the sub-gradient optimisation condition, and the feedback framework, we develop a simple and efficient adaptive-stop iterative optimisation algorithm to solve this model and provide the closed solution of the model at each iteration. The experimental results show that for industrial confocal images, our algorithm can not only effectively suppress noise, but also effectively avoid the distortion of denoised images. The signal-to-noise ratio of industrial confocal denoised images is increased by 1.93 times. In addition, experiments show that the algorithm has good noise reduction ability in other optical imaging instruments, and can suppress not only Gaussian noise, but also Gaussian-Poisson noise.

Modeling of Ultrasonic Flaw Detection Processes in the Task of Searching and Visualizing Internal Defects in Assemblies and Structures

Introduction. Inverse problems are a specific type of tasks where the consequences of phenomena are studied to identify their causes. They are widely used in scientific studies, specifically, those dealing with large amounts of experimental data. In the presented paper, inverse problems in mechanical engineering and structural diagnostics are considered. These areas require precise methods to identify internal defects in various materials, which can be critical to ensure the safety and efficiency of technical structures. Despite the many flaw detection methods available, there is a need for innovative developments that can provide higher accuracy and efficiency. This study integrates different scientific methods and technologies. It opens up new perspectives in nondestructive testing for the detection of internal defects in various materials and structures. Its objective is to develop and implement nondestructive testing methods based on a neural network device to improve the accuracy of defect identification, as well as to build a neural network model and evaluate its effectiveness for the refinement of ultrasonic visualization of internal defects in solid materials. In this regard, the task to be solved is to create a reliable tool for accurate visualization of sizes, shapes, location and orientation of internal defects in various materials.Materials and Methods. The technique of determining the geometric parameters of defects in materials through nondestructive testing is used. The approach combining modeling of ultrasonic wave propagation in acoustic medium and artificial neural network technologies is applied. This approach identifies nonlinear relationships between the geometry of defects and the amplitude-frequency and amplitude-time data obtained during signal analysis. Artificial neural networks are a model that can be trained on examples, which provides for an effective solution to problems that are difficult to express in traditional forms. The study uses the finite difference method in the time domain. It is applied to identify and visualize internal defects in materials using ultrasonic nondestructive testing and convolutional generative neural networks.Results. A convolutional neural network has been developed to visualize internal defects using ultrasonic nondestructive testing techniques. This neural network successfully determines the size of defects, their location, shape and orientation with high accuracy and reliability.Discussion and Conclusion. The authors highlight the key influence of defect size on the accuracy of ultrasonic imaging in various scenarios. The validation of the model for three different cases of defects with different mechanical parameters has shown that for successful visualization of defects, the wavelength of the ultrasonic pulse must be ten times smaller than the size of the defect. When analyzing the impact of defect size on the accuracy of the neural network, it is found that the visualization error increases for defects of smaller size. It has also been found that the relative speed of sound in materials has a greater effect on the accuracy of the method than the relative density of the material. Based on the results obtained by the authors, it can be argued that the developed methods and technical solutions are of great importance for future research in the field of flaw detection. They have significant potential for scientific and practical applications.

AN APPLICATION OF A MATERIAL DEFECT DETECTION SYSTEM USING ARTIFICIAL INTELLIGENCE

In recent years, detecting defects in materials has become an important element in many industries, such as automotive, construction, textile manufacturing, and many others. Material defects, such as stains, cracks, dents, and others, can affect the quality and durability of the product, which can have serious consequences for safety, performance, and product quality. Therefore, it is important to detect and remove material defects as quickly and accurately as possible. Traditional methods of detecting material defects, such as manual inspections or simple visual algorithms, can be unreliable and, above all, time-consuming. In recent years, however, new tools based on intelligent algorithms (Liu et al., 2023) or structures (Neethu et al., 2015), such as neural networks, have emerged that enable automation and significantly increase the precision of defect detection. One of the most popular tools for object detection is the YOLOv5 (Redmon et al., 2016) (You Only Look Once version 5) model, which is based on neural networks and designed for fast and accurate object detection in images. The YOLOv5 model can be trained to detect specific types of material defects, such as stains, cracks, dents, etc. To use the YOLOv5 model for defect detection in materials, images of the material with specified objects of interest are needed, which will be used as input data for the model training. The YOLOv5 model analyses the images and determines rectangular frames around each defect indicating its location, and then assigns a selected label (in this case, the name of the defect). As a result, the YOLOv5 model is able to detect defects in new material images, regardless of their location, colour, and size. As the work progresses, it is also possible to prepare new images and retrain the model for new defects or to improve the performance of existing ones. As a result of the research, the obtained results at a 95% level of recognized defects certainly qualify the applied technology for professional use after appropriate workstation preparation and a sufficiently large amount of data (preferably 1000 or more).

An Enhanced YOLOv5-Based Algorithm for Metal Surface Defect Detection

The detection of surface defects in metal materials has been a challenging issue in the industrial domain. The existing algorithms for metal surface defect detection are limited to a few specific types of defects and exhibit low performance with detection of defects of varying scales. A novel detection method based on the Information Enhancement YOLOv5 Network (IE-YOLOv5) for surface defects in metal parts is proposed, to realize efficient detection, which introduces a lightweight Federated Fusion Slim Neck module (FF-Slim-Neck) and a Parameter-free Spatial Attention mechanism (PSA) in YOLOv5 network. Comparative experiments were conducted using the NEU-DET dataset. The experimental results indicate that the proposed algorithm for detecting defects on metal surfaces achieves an average precision of 96.7% when identifying six different types of surface imperfections: crazing, inclusions, patches, pitting, scaling, and scratches. This represents a 2.4% enhancement in precision compared to the YOLOv5 algorithm. The measured processing velocity of this approach stands at 46.17 frames per second (FPS), highlighting its remarkable qualities of resilience, precision, and real-time capability.

Defect detection and imaging in elastic materials with complex geometries

Additive manufacturing has made it possible to easily create parts with complex shapes, even out of metal materials. However, in order to guarantee the quality of such parts, there is a need to establish a nondestructive inspection technique that is feasible for such complex structures. In this presentation, I will introduce a technology that can visualize internal damage even in complex objects by utilizing the ultrasonic field generated and diffused inside the object with non-contact manner. Ultrasonic waves generated by laser irradiation resonate with the natural frequency of defects such as delamination near the surface of an object. By scanning the laser beam for generating ultrasonic waves and detecting vibrations at a fixed position on the surface of the object, an image of defects in the vicinity of the surface can be obtained as a distribution of vibration energy. The distribution of vibration energy does not depend on reflected or scattered waves from the object's wall, but only on information from the point where the laser is irradiated. This technique is expected to be especially useful for in-situ inspections of the additive manufacturing objects.