Destructive Analysis Research Articles

Combining NIR spectroscopy with chemometrics for discriminating naturally ripened banana and calcium carbide ripened banana

Calcium carbide is prohibited as a fruit ripening agent in many countries due to its harmful effects. Current methods for detecting calcium carbide in fruit involve time-consuming and destructive chemical analysis techniques, necessitating the need for non-destructive and rapid detection techniques. This study combined near infrared (NIR) spectroscopy with chemometrics to detect two banana varieties ripened with calcium carbide in different forms when they are peeled or unpeeled. Sixteen linear discriminant analysis (LDA) models were developed with high average classification accuracies for classifying banana based on the mode used to ripen banana, type of carbide treatment and the duration of soaking banana in carbide solution. Banana colour was predicted with partial least squared regression (PLSR) models with R2CV > 0.74, RMSECV and <5.4 and RPD close to 3. NIR coupled with chemometrics has good potential as a technique for detecting carbide ripened banana even if the banana is peeled or not.

Imaging of microcrack propagation in 3D nanostructures applying laboratory nano-XCT

Abstract Laboratory X-ray microscopy and nano X-ray computed tomography (nano-XCT) have the unique capability to combine sub-100nm resolution and high object penetration. Therefore, these are appropriate non-destructive inspection techniques for the detection of flaws with a size of 100 nm and below in opaque objects and bulk materials. Another advantage of X-ray microscopy – as opposed to destructive failure analysis methods – is that kinetic processes such as microcrack evolution can be imaged. The unique combination of micromechanics and high-resolution 3D imaging allows to study degradation and failure mechanisms in opaque 3D nanopatterned structures, and it allows to provide essential information for fracture mechanics in small dimensions. The high-resolution in-situ/operando imaging of microcrack propagation in microelectronic products and in battery electrodes is demonstrated.

Geometry strategies for the repair of cylindrical gears teeth using laser-directed energy deposition

Gears are essential components in power transmission systems. The replacement of the transmission of a wind turbine can reach more than $300 000 and face long lead times. Previous studies have shown that laser-directed energy deposition (L-DED) has the potential to be used in the repair of gears. However, there is a lack of understanding of the appropriate toolpath planning strategies and their impact on the performance of the gears repaired by L-DED. In this work, we study several strategies for the repair of cylindrical (straight and helical) gears. The strategies consider several types of gear tooth failures, allowing for the repair of a portion of the tooth and the reconstruction of the whole tooth. The studied strategies encompass planar and nonplanar slicing procedures. We manufactured several gear teeth to demonstrate the geometrical and kinematic feasibility of some strategies. We performed destructive analyses on the manufactured teeth to check for manufacturing faults. We used AISI 316L for these experiments, although we are assessing and testing powdered materials for their potential use in gear repair using L-DED. Future work will be devoted to the evaluation of the mechanical performance (e.g., wear resistance and bending fatigue) of the teeth manufactured with L-DED.

NOthing goes toWAste (NOWA): A protocol to optimise sampling of ancient teeth

Advancements in archaeological sciences through innovative scientific techniques applied to ancient human remains have increasingly been transforming the study of the past. Destructive analyses of bioarchaeological or palaeontological specimens such as dental histology, isotopic or elemental analysis of dental mineralised tissues, 14C dating, proteomic analysis or ancient DNA are increasingly being applied to obtain ever more refined past life histories. In tandem with spatially-resolved analyses, mineralised dental tissues, especially enamel, have proven to be ideal archives. The main concern with any of these techniques is the need for some level of destructive sampling and thus damage to specimens. In compliance with the ALARA (As Low [damage] As Reasonably Achievable) principle, we present a standardised protocol (the NOWA protocol) for the optimisation, in terms of minimising the destructive approach, of tooth sampling for histology, biomolecular and biogeochemical analyses. The NOWA protocol enables the collection of multiple datasets through optimised sampling of a single dental specimen, ensuring the preservation of most of the tooth and, to a substantial degree, its morphology. Overall, this approach balances the significant scientific insights from such investigations against the inevitable conservation requirements of valuable archaeological and palaeontological specimens, thus maximising the feasibility of future analyses of individual specimens that need to be evaluated on a case-to-case basis.

Progressive degradation behavior and mechanism of lithium-ion batteries subjected to minor deformation damage

Minor deformation damage poses a concealed threat to battery performance and safety. This study delves into the progressive degradation behavior and mechanisms of lithium-ion batteries under minor deformation damage induced by out-of-plane compression. The effects of varying initial states of charge and loading speed on battery degradation are also analyzed. It has been observed that a deformation damage degree as low as 3.1 % can cause a significant transient capacity reduction up to 6.3 %. More transient capacity reduction can occur at higher initial state of charges and loading speed. Additionally, the investigation reveals that the capacity decay rate between the normal cell and cells experiencing deformation damage degree of <4.7 % is almost similar, with a maximum difference of merely 1.887 mAh/cycle and a minimum difference of 0.001 mAh/cycle, both observed over 3000 cycles. Non-destructive and destructive analysis methods are used to investigate degradation behaviors of the cells experiencing minor deformation dagame. It is found that such progressive degradation is primarily driven by the loss of active lithium ions, followed by the loss of cathode and anode active materials. It is anticipated that the findings will offer theoretical underpinnings for advancements in battery damage assessment, early failure prediction, and facilitation of loss adjustment and compensation by insurance agencies.

Thermodynamic investigation and 4Es analysis of a VCR diesel engine using emulsified diesel with catalytic co-pyrolysis fuel derived from waste LDPE and Pongamia pinnata seeds

Global challenges for massive plastic waste disposal and regular decrement of conventional resources, converting plastic and biomass seeds waste into transportation-grade fuels through co-pyrolysis offer a better option for providing a promising solution. This investigation signifies a thermodynamic power cycle model, and 4Es (Energy, Exergy, Environmental, Economic) analysis of a direct injection unmodified diesel engine powered with various blends of test fuels derived from thermo-catalytic co-pyrolysis of low-density polyethylene (LDPE) wastes and Pongamia pinnata seeds at 500 °C with calcium oxide as catalyst, mixed with diesel. The fuel mixtures of pure diesel and pyrolytic test fuels are utilized for diesel engine testing with varying compression ratio. The synergistic effects of major parameters such as full engine load, varying compression ratios (16:1, 17:1, 18:1, and 19:1), and fuel blends (10, 20, 30, and 40 %) are considered for engine run. The Brake thermal energy was found to increase for the 20 % blend at 6.6 % (40 % load) in comparison to pure diesel. Also, the Brake specific fuel consumption was the least for the same blend, 0.31 kg/kWh at 18:1 CR. The smoke was also found to have lowered by 22 % for the 20 % blend in comparison to pure diesel. At a compression ratio of 18:1, the NOx formation also decreased by approximately 1.4 % in comparison to the pure diesel for almost all considered fuel blends. The fuel efficiency was observed to increase for the 20 % blend compared to pure diesel by 20 %. The cost and exergy destruction analysis also confirmed the D80PB20 to have the least and maximum values respectively for both parameters. The energy, exergy, emission, and economic (4Es) analysis confirmed the suitability of blended fuels for achieving improved engine performance and emissions. In addition, the economic and fuel sustainability analysis foster the techno-economic feasibility of the test fuels as compared to conventional diesel fuel.

Study on dynamic characteristics and wind-vibration control of transmission tower considering local damage and destruction

As existing transmission lines gradually approach their service life, health monitoring studies of in-service transmission towers are becoming increasingly important. In this study, relying on the 110 kV transmission line project of Neihuang Dichu to Er’an in Anyang, Henan Province, China, a refined finite element model of the transmission tower structure was established, and the accuracy of the numerical model was validated based on the health monitoring data of the actual engineering structure. Damage and destruction analyses of transmission tower structures considering vibration modes and frequencies were carried out, and the influence of local damage on the vibration reduction effectiveness of controlled structures under wind loads was discussed and analyzed. The results showed that the vibration mode of the local damage model was shifted along the damaged part, and its frequency changed within 15 %; in contrast, the dynamic characteristics of the local damage model changed more significantly. With the vibration mode as the judgment basis of the structural state, the obvious difference can be observed when the structure undergoes local damage, and the vibration mode should be used as the basis for determining the specific damage site of the transmission tower in the actual project. The adopted TMD can effectively reduce the dynamic response of the transmission tower under different wind attack angles and wind speeds, and its vibration reduction effectiveness performed the worst due to the significant change in the dynamic characteristics of the tower leg damage model, resulting in the detuning of the TMD.

Experimental Characterisation Framework for Laminate Free Edges by Digital Image Correlations and Validation of Numerical Predictions

This paper develops an accurate experimental framework to measure interlaminar strains on laminate free edges. Digital Image Correlation (DIC) is used with an ultra-fine speckle pattern and macro lens to resolve strain fields with a resolution of ∼ 15 µm, allowing for through-thickness deformation and strain mapping. Data analysis techniques are developed to denoise the strain field and discount the effect of random local fibre distribution.The major application of the framework is to validate numerical predictions, and it is demonstrated on angle-ply laminates over a range of ply orientations. A micropolar-based finite-element approach was compared to both a classical finite-element approach and the DIC-acquired interlaminar strain fields. Key improvements by the results include significantly overcoming the stark inconsistency of classical normal strains, and reducing the discrepancies of shear strains from 30 % to 3 ∼ 10 %. The outcomes can be extended to destructive failure analysis and the free-edge study of various other composite architectures.

Study of two thermally integrated pumped thermal electricity storage systems using distinct working fluid groups: Performance comparison

As a competitive new energy storage technology, the thermally integrated pumped thermal electricity storage (TI-PTES) system has received much attention. In this work, two TI-PTES systems are constructed: the RHP-BORC system, which consists of a heat pump cycle (HP) with a regenerator and a basic organic Rankine cycle (BORC), and the RHP-EOFC system, which consists of a HP with a regenerator and an organic flash cycle with ejectors. Meanwhile, R1233zd(E) and Cis-butene are selected to form R1233zd(E)/R1233zd(E) (denoting the working fluid used in the charge and discharge cycles, respectively), R1233zd(E)/Cis-butene, Cis-butene/Cis-butene, and Cis-butene/R1233zd(E) groups. Thermodynamic and economic analyses as well as multi-objective optimization are performed for both systems. The results indicate that for the two systems with different working fluid groups, different parameters have distinct effects on the system performance, and the thermodynamic and economic performance of the RHP-BORC system is better than those of the RHP-EOFC system. For the RHP-BORC system, with the variations of thermal storage temperature, evaporation temperature of heat pump and pinch point temperature difference, the values of different performance metrics of the system with different working fluid groups are close respectively, such as power-to-power efficiency, energy storage density and annual emission reduction. For the RHP-EOFC system under different parameter conditions, when the system uses R1233zd(E)/Cis-butene and Cis-butene/Cis-butene, the performance is better. From the results of the multi-objective optimization, the optimal working fluid group of the RHP-BORC and RHP-EOFC systems are Cis-butene/Cis-butene and R1233zd(E)/Cis-butene, and the values of the power-to-power efficiency and the levelized cost of storage under the optimal solution conditions are 75.76 %, 0.234 $·kWh−1, and 84.31 %, 0.227 $·kWh−1, respectively. The results of the exergy destruction analysis under the optimal solution conditions show that the largest exergy destruction in the RHP-BORC and RHP-EOFC systems are in the condenser (480 kW) and compressor (1275 kW) of the HP cycle. This work expands the configuration of the TI-PTES system, showing promising development prospects. It also provides theoretical support for the further advancement of the TI-PTES system and offers valuable guidance for the design of such systems.

Experimental and analytical study of a reverse-bootstrap air refrigerator for fresh air-conditioning

ABSTRACT The use of hydrofluorocarbons as refrigerants is reduced because of the increasing greenhouse effect. Air refrigeration system is environmentally friendly with air as working medium. In this study, a reverse-bootstrap air refrigeration cycle was proposed for fresh air-conditioning, which eliminated the hot heat exchanger to reduce volume and weight, and a full fresh air refrigerator was developed and tested in a psychrometric test room. Combining the characteristic curves of a motor-driven turboexpander–compressor (MTEC), a numerical model was established to analyze system off-design performance. The relative deviations between the predictions and experimental data were within 10%. The test and calculation were conducted at standard conditions (the outdoor and indoor dry and wet bulb temperature is 35/24°C and 27/19°C, respectively). The MTEC operating at design rotating speed 38 krpm could supply fresh air with a flow rate of 517.4 kg/h and temperature of 12.0°C, and a cooling capacity of 2.93 kW was obtained with a system Coefficient of performance (COP) of 0.315. The optimal COP and corresponding rotating speed will change with the variation of environmental parameters. As the outdoor temperature increases from 32 to 38°C, the optimal COP decreases by 29.6% and the corresponding rotating speed increases from 39.6 to 47.6 krpm. Moreover, when the outdoor relative humidity increases from 35% to 55% and the indoor temperature increases from 23 to 31°C, the COP decreases by 36.8% and increases by 31.9%, respectively. The advanced exergy analysis indicate the system avoidable exergy destructions account for 54.9%. Under the avoidable conditions, the efficiency of compressor, expander, and motor is 0.85, 0.85, and 0.95, respectively, the system COP can reach 0.946. The exergy destruction analysis of components indicates the importance to optimize the compressor.

Analysis of fluorescence changes in different sections of green bell pepper (Capsicum annuum L.) over storage periods

To prevent food losses, particularly those associated with financial losses, researchers are still working to determine the index for monitoring the freshness of green peppers during storage. This research aimed to examine the feasibility of using fluorescence spectroscopy to determine the freshness index. It was established the time series fluorescence properties were from various parts of green bell pepper (Capsicum annuum L.) during storage. For each evaluation, three measurements of the Emission and Excitation Matrix (EEM) fluorescence were carried out through the period of 16 days of storage at 4ºC. No difference was observed in color and chlorophyll content throughout the storage of green pepper. However, firmness was the destructive analyses more sustainable to determine freshness compared to the others, observing changes as of day 12 after harvest. The fluorescence emission peak at 450 nm on the excitation of 360 nm was observed to be potential as the freshness index showing the correlation with texture parameter showing R2 = 0.82. Therefore, this is a novel technique that should be further studied to optimize its use in the food industry to monitor fruits and vegetables during their preservation and to prevent food losses.

Evaluation of Nutritional Values of Edible Algal Species Using a Shortwave Infrared Hyperspectral Imaging and Machine Learning Technique.

In recent years, the growing demand for algae in Western countries is due to their richness in nutrients and bioactive compounds, and their use as ingredients for foods, cosmetics, nutraceuticals, fertilizers, biofuels,, etc. Evaluation of the qualitative characteristics of algae involves assessing their physicochemical and nutritional components to determine their suitability for specific end uses, but this assessment is generally performed using destructive, expensive, and time-consuming traditional chemical analyses, and requires sample preparation. The hyperspectral imaging (HSI) technique has been successfully applied in food quality assessment and control and has the potential to overcome the limitations of traditional biochemical methods. In this study, the nutritional profile (proteins, lipids, and fibers) of seventeen edible macro- and microalgae species widely grown throughout the world were investigated using traditional methods. Moreover, a shortwave infrared (SWIR) hyperspectral imaging device and artificial neural network (ANN) algorithms were used to develop multi-species models for proteins, lipids, and fibers. The predictive power of the models was characterized by different metrics, which showed very high predictive performances for all nutritional parameters (for example, R2 = 0.9952, 0.9767, 0.9828 for proteins, lipids, and fibers, respectively). Our results demonstrated the ability of SWIR hyperspectral imaging coupled with ANN algorithms in quantifying biomolecules in algal species in a fast and sustainable way.

Impact of proximity of hard and soft segment on IR frequency of carbamate links correlating the mechanical properties of surface-functionalized fly ash–reinforced polyurethane composites

Abstract Polyurethane composites synthesized by interaction of fly ash filler with polyether polyol, cross-linking agent, and curing agent in a certain ratio. The study’s findings show that the mechanical properties of polyurethane composite are lowered by the hydroxyl moieties of surface-functionalized fly ash that are chemically or physically linked. The study also reveals that prior subjecting the samples of surface-functionalized fly ash–reinforced polyurethane composite material for destructive analysis by UTM for evaluating mechanical properties. The in-depth study of the IR spectroscopy data of the composites is done focusing onto the stretching frequency of carbonyl group of carbamate links the trend in mechanical behavior of the samples, the number of fly ash–carbamate links, and proximity of HS–SS (hard segment–soft segment) of fly ash–reinforced polyurethane composites can be foretold. By a detailed analysis of the patterns of carbonyl stretching frequencies of carbamate links, one can gain insight into the microphasic level of the separation and proximity of hard and soft segments in composites, which govern their mechanical properties. The relationships between carbamate carbonyl stretching frequencies and mechanical characteristics of composites have been found to be inversely correlated. In order to offset the excess hydroxyl group contribution due to OH-loaded fly ash, as indicated by the isocyanate (NCO) peak intensity (2,240–2,280 cm−1) in the composite’s infrared spectra, the studies were conducted at a higher index ratio (1.64).

BIO PROTECTIVE TREATMENT OF WOOD

The article covers issues related to biological protection of wood. It is shown that wood, especially chopped (dead) wood is exposed to both external natural factors and the action of various microorganisms. Natural factors, especially ultraviolet rays of solar radiation, change the chemical composition of wood and destroy lignin as the least stable part of wood. Wood is more intensively destroyed by various microorganisms ‒ bacteria and fungi. Wood contains many nutrients - starch, sugar, fats, compounds of nitrogen, phosphoric acid, sulfur, potassium, calcium and magnesium. All of them are an excellent environment for the settlement and reproduction of various microorganisms. It is noted that among hardwoods, beech wood is most negatively affected by microorganisms, especially in the warm period of the year. This wood is a valuable breed from which furniture, planed veneer and various parts and products in the construction industry are made. Therefore, it is very important to keep it intact and attractive for a long time by treating it with bioprotective agents. The purpose of the research is to determine the biostability of beech wood after its treatment with bioprotective agents. An analysis of the biological destruction of wood and the use of protective materials was conducted and it was established that the paucity of data to explain and describe the bioprotection process, the neglect of environmentally safe means leads to the biodestruction of wooden structures under the action of microorganisms. A bioprotective agent based on copper oxychloride, nickel sulfate and soda ash was used in a certain ratio of components. Control and treated samples of beech wood were placed in the prepared soil and after 60 days the weight loss of the samples was determined. Studies have shown that the biostability of beech wood treated with a bioprotective agent is 4.3 times higher than that of untreated samples. The idea of the reproduction of microorganisms in the material and their death has been revealed, which, accordingly, shows changes in the metabolic processes of the vital activity of microorganisms. It has been established that the use of treated surfaces oil-wax and azure reduces the biodegradation process by more than 8 times for untreated samples. Keywords: beech wood, bioprotective treatment, bioprotective agents, biostability determination method, mass loss, treatment efficiency.

Study of Corrsion System on Iron Artefacts through Neutronic Analysis

This study was conducted to confirm the possibility of using the corrosion products of iron artifacts and corrosion systems for non-destructive analysis using neutrons by applying the non-destructive analysis method and the destructive analysis method together to the analysis of the corrosion system of iron artifacts. As a result of transmission analysis, the shape of the artifact, the boundary between the metal layer and the corrosion layer, etc. could be confirmed, and through tomography, the shape, surface shape, and internal cross section of the artifact could be confirmed. It was confirmed that the corrosion thickness using the residual stress measurement method has a high reliability of less than 10% of an error compared to other analysis results, so it is highly likely to be used to measure the corrosion thickness. It was confirmed that the corrosion layer of the iron artifact analyzed this time was mainly Goethite among the types of DPL and was embedded with Magnetite/Maghemite. Since the neutron analysis can estimate the corrosion thickness non-destructive, it is highly likely to be used to study the corrosion rate of iron artifacts by burial environment through additional studies.

Advanced Excitation Symmetry Analysis Method (ESAM) for improved automated ultrasonic testing of polished materials

One of the strategic plans of the international NDT community is to define standards for developing advanced and digitalized non-destructive testing for automated set-up in mass production [1,2]. Excitation Symmetry Analysis Method (ESAM) are new coded signal processing tools exploring symmetry properties [3]. ESAM method aims to extract the nonlinearity from an ultrasound output by studying the property of symmetry of the transfer function. More precisely, the extraction of nonlinearity is done using basis function associated to a group which is associated to an a priori transfer function. As soon as the linear tomography uses the invariant properties of amplitude dependence, nonlinear tomography should exploit the invariance properties (or symmetry properties) of the complex system. Consequently, the invariance of the stationary properties of a complex medium would be supposed to be associated to a signature of the degradation, that will be extracted with advanced signal processing tools. The idea remains the same: studying the symmetry and more precisely the time reversal one and the inversion. A signal processing is used to measure discrepancies in the autocorrelation function (output signal called chirp coda) for two inputs: a signal and its inversion (pulse inversion). The experiments were done on different sample with and without cracks. It has been shown that when the nonlinearities are extracted from the chirp coda amplitude are non- negligible in crack area and nonlinearities are out of phase. Then, mixing symmetries like time reversal and pulse inversion enable the detection of defect that are difficult to detect with conventional ultrasound method. Indeed, for such crack a destructive mechanical analysis called Jomini is done where the material is polished and examined with microscope. The sensitivity improvement of chirp-coded signal processing has been validated in various domains. Coded excitation techniques, used in communication systems such as radar and sonar provide improved SNR without increasing the amplitude of excitation. The typical test equipment consists of a preamplifier Juvitek TRA-02 (0.02 - 5 MHz) connected to a computer, an amplifier ENI model A150 (55 dB at 0.3-35 MHz), a shear wave transducer Technisonic (2.25 MHz), and a longitudinal wave transducer Panametrics V155 (5 MHz). The experimental device was tested with the V3 calibration block, improved, and specially scaled in order to access to a wide range of multivalued parameters: mechanical properties, ultrasonic parameters (celerity and attenuation) and local geometric data.

Chemostratigraphy of the Sherbrook Supersequence – 13 wells from the offshore Otway Basin

An elemental chemostratigraphic study of the offshore Otway Basin has been undertaken as part of a collaboration between Chemostrat and Geoscience Australia, the main aim of which is to better constrain the sequence boundaries of, and within, the Sherbrook Supersequence. This study includes the elemental analysis of 1185 cuttings samples from the Sherbrook Supersequence (and overlying stratigraphy) in 13 offshore wells. Sampling of cuttings was particularly challenging as many of the targeted wells have a paucity of material available for destructive analysis. Inductively Coupled Plasma-Optical Emission Spectrometry and Mass Spectrometry (ICP-OES and MS) analysis was undertaken to establish a regional elemental chemostratigraphic framework of the Sherbrook Supersequence. The resultant framework comprises two chemostratigraphic sequences, seven chemostratigraphic packages and eighteen chemostratigraphic units. While the analysis could not clearly distinguish the base of the Sherbrook Supersequence it has provided valuable insight into correlations between wells, within the Sherbrook and overlying Wangerrip supersequences. Importantly it has confirmed that in the offshore part of the basin sedimentary processes and inputs remain unchanged from the Shipwreck to the Sherbrook (Turonian–Maastrichtian).

Coupling imaging mass cytometry with Alcian blue histochemical staining for a single-slide approach.

Imaging mass cytometry (IMC) is a metal mass spectrometry-based method allowing highly multiplex immunophenotyping of cells within tissue samples. However, some limitations of IMC are its 1-µm resolution and its time and costs of analysis limiting respectively the detailed histopathological analysis of IMC-produced images and its application to small selected tissue regions of interest (ROI) of one to few square millimeters. Coupling on a single-tissue section, IMC and histopathological analyses could permit a better selection of the ROI for IMC analysis as well as co-analysis of immunophenotyping and histopathological data until the single-cell level. The development of this method is the aim of the present study in which we point to the feasibility of applying the IMC process to tissue sections previously Alcian blue-stained and digitalized before IMC tissue destructive analyses. This method could help to improve the process of IMC in terms of ROI selection, time of analysis, and the confrontation between histopathological and immunophenotypic data of cells.

THE METHOD OF DIFFERENTIAL THERMAL ANALYSIS IN STUDIES OF THE SOLID PULVERIZED FUEL DESTRUCTION AT A HIGH HEATING RATE

An analysis of publications containing information on the differential thermal analysis (DTA) method history, its essence and some aspects of practical use for the analysis of of solid fuel thermal destruction and combustion was carried out. A method of laboratory research based on the principles of DTA, characterized by a high heating rate (up to 2000 degr/min), is proposed. The possibility of using the proposed technique for comparative analysis of thermal destruction the kinetics for pulverized coal fuel (PVP) mixtures blown into blast furnaces to replace coke is shown.

Modeling the Interaction of Proximal Fragments for Destructive Atmospheric Entry Analysis

The destructive atmospheric entry process is distinguished by the formation of several fragments due to the severe aerothermal loads encountered during the descent. The proximity of debris leads to shock wave interactions and collisions between bodies, influencing the overall dynamics of the fragments and affecting the prediction of demise and ground impact location. To account for these effects, the use of computational fluid dynamics is introduced to resolve the shock interaction patterns by employing a quasi-steady approach, and the use of a simple rigid-body collision model is introduced to represent the dynamics of fragments in the cloud of debris. The quasi-steady approach is assessed and validated by comparative analysis with a few studies in the literature. One of these examples is the rebuilding of the VKI’s experiment of a free-flying ring crossing a shock wave generated by the presence of a stationary cylinder. The impact of explicitly modeling collision dynamics in the trajectory of fragments and ground spread distance is validated by considering a set of relevant test cases from the literature and tested them for destructive atmospheric reentry of the Attitude Vernier Upper Module, the launcher VEGA upper stage.