Design Scheme Research Articles

Asymmetric dumbbell dimers simultaneously supporting quasi-bound states in continuum and anapole modes for terahertz biosensing

Abstract Multi-resonant metasurfaces are of great significance in the applications of multi-band nanophotonics. Here, we propose a novel metasurface design scheme for simultaneously supporting quasi-bound states in continuum (QBIC) and other resonant modes, in which QBIC resonance is generated by mirror or rotational symmetry breaking in oligomers while other resonant modes can be simultaneously excited by rationally designing the shapes of meta-atoms within oligomers. As an example, the simultaneous excitation of QBIC and anapole modes are demonstrated in a dimer metasurface composed of asymmetric dumbbell-shaped apertures. Based on the far-field multipole decomposition and near-field electromagnetic field distributions, the origin mechanisms of QBIC and anapole mode are elucidated. The symmetry breaking of dumbbell-shaped dimer results in QBIC. Within a certain asymmetric variation range, the contributions of toroidal dipole moment and electric dipole moment with approximately equal magnitudes remain dominant, which allows the anapole mode to always present. The effectiveness of the proposed design scheme is further confirmed by the experimental results identical with the evolutions of numerical simulation. In terahertz biosensing experiments, the anapole mode exhibits a higher sensitivity of 271.3 GHz (nmol/μl)−1, whereas the QBIC can achieve a lower detection limit of 0.015 nmol/μl and expands the detection range by almost an order of magnitude. Our findings are beneficial to designing multi-resonant metasurfaces with different resonance modes and promote the corresponding applications in the fields of biosensing, lasers, filtering, and nonlinearity.

Selection of the optimal scheme for the conceptual design of a polisher considering multi-source uncertainties

Selection of the optimal scheme for the conceptual design of a polisher considering multi-source uncertainties

Design and application of multi-level grid agc collaborative control scheme adapting to distributed new energy control

Design and application of multi-level grid agc collaborative control scheme adapting to distributed new energy control

Optimization design of the cavity tuning and RF input coupler for an 11 MeV superconducting cyclotron

This study addresses the compact design requirements for a 11 MeV superconducting cyclotron utilized in isotope production by proposing a design and optimization scheme for a radio frequency (RF) input coupling system. The system, comprising a coupler loop, transmission lines, and RF window, has been tailored to accommodate the spatial constraints imposed by the super conducting magnet radius, thereby facilitating efficient RF power transfer to the RF cavity and minimizing input power. Structural optimization of the coupler loop and RF window has achieved S11 parameter of -82.23 dB, significantly reducing input power while maintaining high coupling efficiency. A coaxial coupler suitable for lower frequency ranges has been designed, employing a tapered structure for the transmission line to ensure a smooth transition to reduce impedance discontinuity effects and enhance adjustability. The multi-stage design of the RF window has achieved fine impedance matching, significantly lowering the S11 parameter. In response to frequency drift caused by RF loss and temperature increase, the study utilizes perturbation theory to analyze the perturbation effect of coupling components on the resonant frequency, designing an adjustable structure with both coarse and precise tuning capabilities, realizing tuning precision at the kHz/mm level and a tuning range of several MHz. A conjectural formula has been proposed based on the impact of the tuner's structural parameters on the resonant frequency, accurately calculating the equivalent inductance of the tuner and the resonant frequency of the RF cavity post-tuner installation, with the maximum estimation error of the resonant frequency kept within 0.1%, offering significant guidance for engineering design.

Optimization design and simulation of chip-level micro-gas columnar preconcentrator structure based on ANSYS

Abstract To achieve the efficient preconcentration of measured sample gas in microfluidic chips, this paper proposes a design and simulation scheme for the chip-level micro-gas columnar pre-concentrated structure based on ANSYS software. Firstly, four kinds of chip-level micro-gas columnar preconcentrators with circular, semi-circular, triangular, and rhombic shapes were designed, and the simulation analysis of gas-phase micro-fluidic dynamics was performed on the chip-level micro-gas columnar preconcentrator by ANSYS software. The influence of different design parameters on the pre-concentrated effect of level chips micro-gas columnar preconcentrator was discussed. The simulation results show that the arrangement is a triangle arranged in reverse parallel, and the preconcentration effect of the chip-level micro gas column preconcentrator is better.

Heterostructure channel designs for the topological interface state of surface water waves using topology optimization

The increase of the concentrated density of wave energy is conducive to improving the generation efficiency of wave power generation. Interface states induced in the heterostructure channels can be applied to concentrate the surface water wave. The optimal designs of heterostructure channels can be found through the topology optimization based on the multiple population genetic algorithm to induce a topological interface state with high transmission at the desired frequency. The introduction of the topological interface state effectively and steadily increases the wave energy density in a certain space and improves the robustness and the localization of the water wave concentrator. This topology optimization method provides a design scheme for the wave energy concentrator in the field of ocean engineering.

Analysis of the resonant converter for multi-terminal collection of DC offshore wind farms

Abstract With the rapid development of power electronics technology, the offshore wind power system using DC collection and DC transmission is the best solution to increasing offshore distance. Resonant converters achieving soft switching have become a common choice in the DC/DC power conversion system. This paper proposed a design scheme for the multi-terminal collection of DC offshore wind farms based on the resonant converter. The operating principles are analyzed, and variable-frequency control of the converter is utilized to control the output voltage. Simulation verifies the effectiveness of the multi-terminal DC collection system and its control strategy.

Molding simulation of airfoil foam sandwich structure and interference optimization of foam-core

During the Co-Cure Molding (CCM) of airfoil foam sandwich structure, it is challenging to avoid collapse of foam core at the trailing edge. Herein, an Equal Proportional Thickening (EPT) method is proposed to optimize the interference of polymethacrylimide (PMI) foam core during the CCM process. Firstly, based on some basic parameters of composite skin and foam core obtained by experiments or multi-scale simulations, a thermal-curing-mechanical coupling analysis for the CCM of foam sandwich structure is performed and the results show that the maximum stress within foam core occurs at the completion of mold-closing, which tends to decrease during the subsequent CCM process. Then, the foam core is thickened by traditional equidistant-thickening method, and the simulation reveals that the foam core at the trailing edge tends to collapse because of stress concentration. Conversely, if the foam core is thickened by the proposed EPT method, the mold-closing caused collapse at the trailing edge can be effectively avoided, and a thickening ratio range of 0.6%–2.0% is obtained, which is further proved by practical verifications. Therefore, the interference design scheme proposed can ensure the molding quality and effectively reduce the scrap of molded products.

A novel wideband control scheme for uncertain multi-mass systems and its application to drivetrain benches

In multi-mass systems, torsional vibration is a common and annoying phenomenon. Effective vibration suppression and robustness to wide-range parameter variations are essential for a sound motion system. However, most control methods focus on the primary resonance mode, and the high-order resonance modes are not actively treated in the control design, resulting in the control bandwidth not being high enough and limiting the control performance. This paper proposes a novel two-stage design scheme to realize a wideband control to improve control performance. First, a hybrid uncertainty model is tailored for multi-mass systems, which uses an equivalent and uncertain spring constant to describe the variation of the primary mode and a dynamic uncertainty to cover the other resonance modes. This hybrid model strikes a better balance between the model conservatism and the feasibility of a less conservative design. Then, the passivity of the parameter uncertainty is utilized to conduct a phase compensation on the nominal system. After the phase compensation, all uncertainties are converted into norm-bounded ones, and the robust performance design is carried out. This method is applied to vehicle drivetrain benches, and its superiority is validated through simulation comparisons and experiments on two typical types of drivetrain benches.

Fast automatic docking control for electric tractors

In this study, we investigate the automatic docking of an electric tractor with a semi-trailer in narrow and long-distance scenarios. We propose an automatic docking method based on a multi-sensor fusion high-precision positioning algorithm and a multi-strategy docking control algorithm. To solve the heading-angle error of the involved camera due to mechanical errors, a compensation value in the form of angle deviation is introduced. To alleviate the increase in the camera detection error with longitudinal distance, a piecewise coordinate compensation function is proposed. Repositioning is performed using light detection and ranging (Lidar) to improve the pose-perception accuracy to the millimeter level. To avoid the interference of point clouds on the relocation accuracy of Lidar, a search-and-location method that combines both small and large neighborhoods is proposed. To achieve the desired docking success rate, a multi-strategy-adjustment control algorithm is used to enable comprehensive adjustment, including approximate control of the maximum angle based on lateral deviation and fine proportional-integral-differential (PID) control based on lateral deviation and longitudinal distance, security check cycle and premature warning mechanism, and risk avoidance control. Finally, the reliability and stability of the design scheme are verified by conducting multiple experiments involving actual vehicles.

The rapid improvement method of fatigue life reliability for single-crystal aeroengine turbine blades: Casting orientation design technology

The uncertainty in the casting orientation of single-crystal aeroengine turbine blades is an intractable engineering problem, and breaking through the crystal orientation design technology is vitally important to enhance the fatigue lifetime reliability of the blade. In this paper, a three-dimensional decoupling model for casting orientation is established according to the crystallographic characteristics of single-crystal blade, and the distribution information and statistical features of the orientation deviation angle of single-crystal turbine blades are obtained for the first time according to this decoupling model. Subsequently, the orientation-dependent models and generalized regression neural networks (GRNNs) analysis system of reliability are established, and the analysis of fatigue life response for single-crystal blades in four quadrants is carried out based on the neural network analysis system. Finally, three orientation design schemes are developed, and the improvement effect of each scheme on lifetime reliability are investigated. For the secondary orientation design scheme, the lifetime reliability is improved from 62 % to more than 95 % at the design life of 15,000 cycles; For the integrated orientation design scheme, the life reliability is improved from 50 % to more than 95 % at the design life of 20,000 cycles. The results show that the orientation design can effectively improve the fatigue life reliability of the product, especially in the long-life design interval of 10,000 to 20,000 cycles. Therefore, the orientation design should be highly emphasized in the design of single-crystal turbine blades for aeroengine.

MULTI-OBJECTIVE OPTIMIZATION STUDY OF RESIDENTIAL ENERGY CONSUMPTION BASED ON EDH AND THE STOCHASTIC OPERATION OF AIR CONDITIONING

ABSTRACT Current requirements for residential energy-efficient design solutions in China are relatively homogeneous, requiring only improvements in overall building energy performance, often ignoring the energy differences between different residential housing units. This paper proposes a multi-objective research framework based on an occupant behavior model of air conditioning and a Non-dominated Sorting Genetic Algorithm-II (NSGA-II) to study energy-efficient design solutions for residential envelopes. The optimal energy-saving design scheme has a 22.56% and 35.34% reduction in energy consumption difference between residential units and overall building energy consumption, respectively, both of which have been optimized substantially. Moreover, the overall energy performance of the building can be improved when the “energy performance difference between housing units” (EDH) is reduced, which verifies that EDH is an important criterion for improving the energy performance of residential housing units.

Development and application of pressure transmitter based on IMC chip

Abstract This paper proposes a design scheme for an FF bus pressure transmitter with a domestic IMC chip, using an ECS-700 instrumentation control system to apply the pressure transmitter in refining and chemical projects. Through planning and designing, configuration, and debugging, it improves the convenience and accuracy of the instrumentation system operation.

Research on the application of high-speed EMU driver’s cab console based on new composite materials

Abstract This paper mainly introduces the design and verification of the driver’s cab console for high-speed EMU based on new composite materials and molding technology. The structure of the driver’s cab console is divided into 5 functional modules, and the main body of the structure is made of carbon fiber. The electrical layout follows the relevant standards such as UIC 651 and UIC 612, and is arranged according to the dimensions of importance, frequency, and accessibility. Through ergonomics simulation analysis, finite element simulation analysis, and prototype trial verification, the design scheme proposed in this paper has been significantly improved in many aspects such as function realization, lightweight, and ergonomics comfort.

The supporting structure strength analysis of indexing stamping machine for manufacturing thin-walled inverting steel tubes

Abstract Due to the occurrence of cracks in thin-walled inverting steel tubes during the inverting process leading to fractures, thereby failing to achieve the desired energy absorption effect, they were often manufactured by interstitial stamping process with the manual rotation of thin-walled tubes to reduce stress concentration points, which is not conducive to mass production. Therefore it proposes a new design scheme of the indexing stamping machine for mass production of thin-walled inverting tubes. And the tube supporting structure of the indexing stamping machine will undergo shear stress and axial stress during manufacturing operation. To ensure that the machine can operate properly, ANSYS software is employed to conduct strength and stability analysis for the supporting structure. The calculation results indicate that the main supporting structure can meet the strength requirements of the thin-walled inverting tube forming machine. These study findings provide some references for optimizing the structure design for indexing stamping machines.

Study on the stability and ultra-low frequency oscillation suppression method of pumped storage power plant with dual units sharing one pipeline

This paper aims to investigate the stability of the pumped storage power plant (PSPP) with dual units sharing one pipeline (DUSOP) and the method of suppressing the ultra-low frequency oscillation (ULFO) characteristics. Firstly, four nonlinear models of pumped storage regulation system (PSRS) with DUSOP are established under the design scenarios of no surge tank, upstream surge tank (UST), downstream surge tank, and upstream and downstream dual surge tanks. Then the stability of the PSRS under different surge tank arrangements (STAs) in the long diversion system design scenarios (LDSDS) is comparatively analyzed. Finally, based on the concept of stability margin, the influence mechanism of the operating points on the ULFO characteristics is investigated in the LDSDS with UST, and the influence of the governor parameters, hydrodynamic parameters, and mechanical parameters on the damping ratio and frequency of the system is also analyzed. The results show that among STAs, the design scheme of arranging the UST is more reasonable for PSPP with LDSDS from the comprehensive consideration of the economy of the project and the stability of the system. For PSPP with UST, on the line of equal stability margin, increasing the proportional gain, reducing the unit inertia time constant, reducing the water flow inertia time constant, and appropriately increasing the area of the surge tank can increase the frequency and reduce the amplitude, which is conducive to the suppression of ULFO. In the stability domain range, increasing the proportional gain increases the frequency and the system stability increases and then decreases. Increasing the integral gain decreases the frequency and then increases the system stability. At the same time, the frequency of the unit can be changed by adjusting the parameters of the system to avoid resonance between the frequency of the unit and the frequency of the power grid and to ensure the stability and safety of the unit operation.

Light-Driven H2 Production in Chlamydomonas reinhardtii: Lessons from Engineering of Photosynthesis.

In the green alga Chlamydomonas reinhardtii, hydrogen production is catalyzed via the [FeFe]-hydrogenases HydA1 and HydA2. The electrons required for the catalysis are transferred from ferredoxin (FDX) towards the hydrogenases. In the light, ferredoxin receives its electrons from photosystem I (PSI) so that H2 production becomes a fully light-driven process. HydA1 and HydA2 are highly O2 sensitive; consequently, the formation of H2 occurs mainly under anoxic conditions. Yet, photo-H2 production is tightly coupled to the efficiency of photosynthetic electron transport and linked to the photosynthetic control via the Cyt b6f complex, the control of electron transfer at the level of photosystem II (PSII) and the structural remodeling of photosystem I (PSI). These processes also determine the efficiency of linear (LEF) and cyclic electron flow (CEF). The latter is competitive with H2 photoproduction. Additionally, the CBB cycle competes with H2 photoproduction. Consequently, an in-depth understanding of light-driven H2 production via photosynthetic electron transfer and its competition with CO2 fixation is essential for improving photo-H2 production. At the same time, the smart design of photo-H2 production schemes and photo-H2 bioreactors are challenges for efficient up-scaling of light-driven photo-H2 production.

Addressing Launch and Deployment Uncertainties in UAVs with ESO-Based Attitude Control

This paper describes the design and implementation of a novel three-axis attitude control autopilot scheme for tube-launched, air-deployed UAVs. In early flight tests, various factors, such as model uncertainties during launch, aerodynamic uncertainties, geometric parameter changes during deployment, and significant uncertainties in booster rocket installation, exceeded the control capabilities of the attitude autopilot, causing flight instability. In order to address these issues, a numerical simulation model of the full launch process considering deviations was established based on early flight tests. A cascade attitude controller was then designed using an extended state observer (ESO), and the boundedness of control errors under unknown bounded disturbances was theoretically proven, providing requirements for the parameter tuning of the cascade controller. Comparative experiments and a second flight test both demonstrate that the ESO-based cascade attitude controller exhibits strong feedforward disturbance compensation under high-uncertainty conditions, effectively achieving stable control within the flight envelope.

Reconfigurable Origami/Kirigami Metamaterial Absorbers Developed by Fast Inverse Design and Low-Concentration MXene Inks.

Reconfigurable metamaterial absorbers (MAs), consisting of tunable elements or deformable structures, are able to transform their absorbing bandwidth and amplitude in response to environmental changes. Among the options for building reconfigurable MAs, origami/kirigami structures show great potential because of their ability to combine excellent mechanical and electromagnetic (EM) properties. However, neither the trial-and-error-based design method nor the complex fabrication process can meet the requirement of developing high-performance MAs. Accordingly, this work introduces a deep-learning-based algorithm to realize the fast inverse design of origami MAs. Then, an accordion-origami coding MA is generated with reconfigurable EM responses that can be smoothly transformed between ultrabroadband absorption (5.5-20 GHz, folding angle α = 82°) and high reflection (2-20 GHz, RL > -1.5 dB, α = 0°) under y-polarized waves. However, the asymmetric coding pattern and accordion-origami deformation lead to typical polarization-sensitive absorbing performance (2-20 GHz, RL > -4 dB, α < 90°) under x-polarized waves. For the first time, a kirigami polarization rotation surface with switchable operation band is adapted to balance the absorbing performance of accordion-origami MA under orthogonal polarized waves. As a result, the stacked origami-kirigami MA maintains polarization-insensitive ultrabroadband absorption (4.4-20 GHz) at β = 0° and could be transformed into a narrowband absorber through deformation. Besides, the adapted origami/kirigami structures possess excellent mechanical properties such as low relative density, negative Poisson's ratio, and tunable specific energy absorption. Moreover, by modulating the PEDOT:PSS conductive bridges among MXene nanosheets, a series of low-concentration MXene-PEDOT:PSS inks (∼46 mg·mL-1) with adjustable square resistance (5-32.5 Ω/sq) are developed to fabricate the metamaterials via screen printing. Owing to the universal design scheme, this work supplies a promising paradigm for developing low-cost and high-performance reconfigurable EM absorbers.

Research on Structural Design and Optimisation Analysis of a Downhole Multi-Parameter Real-Time Monitoring System for Intelligent Well Completion

In this paper, based on electro-hydraulic composite intelligent well-completion technology, a new type of downhole multi-parameter real-time monitoring system design scheme is established. Firstly, a multi-parameter real-time monitoring system with a special structure is designed; secondly, its reliability is analysed by applying the method of numerical simulation; finally, in order to verify the reliability of the simulation results, a principle prototype is developed, and indoor experimental tests of fluid flow are carried out. The experimental results show that the flow rate is directly proportional to the differential pressure, and when the flow rate is certain, the higher the water content, the higher the differential pressure. The indoor experimental flow rate of 400~1000 m3/d is measured with high accuracy, and the error range is within 5%. Numerical simulation and experimental results with a high degree of fit, a flow rate of 400–1000 m3/d, the two error range within 10%, the integrated flow coefficient of the experimental value is stable between 0.75–0.815, the simulation value is stable between 0.80–0.86. The mutual verification of the two shows that the flow monitoring design meets the requirements and provides a reference basis for the structural design of the intelligent, well-completion multi-parameter real-time monitoring system.