Wideband Array Design Research Articles

Development of a Dual-Layer Structure for Cymbal Transducer Arrays to Achieve a Wider Bandwidth.

Cymbal transducers are typically grouped and arranged in planar arrays. For projector arrays, a wide bandwidth on the transmitting voltage response (TVR) spectrum is required for better underwater communication and data transmission within a short time. The purpose of this study is to develop a wideband cymbal array by controlling the center-to-center (CTC) spacing between the cymbal transducers in the array. In the practical design of the array, due to the arrangement of elements in one layer, the minimum CTC spacing between the cymbals is constrained to the diameter of the cymbals in use. To overcome this limitation, we propose a new dual-layer array structure. Finite element analysis of the cymbal array showed that the bandwidth was generally inversely proportional to the CTC spacing. We explained the mechanism of this relationship using a theoretical analysis of the mutual radiation impedance between the cymbals in the array. Subsequently, we identified the optimum CTC spacing to achieve the widest possible bandwidth for the cymbal array. The validity of the wideband array design was verified through the fabrication and characterization of prototype arrays. We confirmed that the two-layered arrangement could significantly widen the bandwidth of the cymbal array while maintaining the TVR above a specified level.

A Millimeter-Wave Wideband Dual-Polarized Antenna Array With 3-D-Printed Air-Filled Differential Feeding Cavities

A millimeter-wave high-gain dual-polarized antenna array with an enhanced bandwidth is presented. An innovative air-filled differential feeding cavity loaded with a short-ended cross-shaped waveguide is investigated to serve as the feed network and the mode splitter simultaneously of the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2\,\,\times2$ </tex-math></inline-formula> dual-polarized subarrays. Wideband characteristics and a compact planar size that are desirable for the wideband array design are achieved. Moreover, a wideband dual-polarized waveguide-fed magnetoelectric (ME) dipole antenna with a lightweight self-support geometry and wideband H-plane parallel feed networks with modified dual-layered configurations are proposed, which are convenient to connect with the differential feeding cavity directly. With the use of a commercial metallic 3-D printing facility, the proposed radiating elements, feeding cavities, and feed networks can be combined successfully in a whole piece with a lightweight geometry. The printed <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$8 \times 8$ </tex-math></inline-formula> array prototype operating in the Ka-band confirms a wide bandwidth of about 30%, a gain of up to 28.5 dBi, and stable unidirectional radiation patterns for the two polarizations. Benefitted from the advantages of the promising wideband dual-polarized radiations and convenience of fabrication, the proposed antenna array would be attractive for millimeter-wave polarization diversity applications.

Sparse Array Design for Wideband Beamforming With Reduced Complexity in Tapped Delay-Lines

Sparse wideband array design for sensor location optimization is highly nonlinear and it is traditionally solved by genetic algorithms (GAs) or other similar optimization methods. This is an extremely time-consuming process and an optimum solution is not always guaranteed. In this work, this problem is studied from the viewpoint of compressive sensing (CS). Although there have been CS-based methods proposed for the design of sparse narrowband arrays, its extension to the wideband case is not straightforward, as there are multiple coefficients associated with each sensor and they have to be simultaneously minimized in order to discard the corresponding sensor locations. At first, sensor location optimization for both general wideband beamforming and frequency invariant beamforming is considered. Then, sparsity in the tapped delay-line (TDL) coefficients associated with each sensor is considered in order to reduce the implementation complexity of each TDL. Finally, design of robust wideband arrays against norm-bounded steering vector errors is addressed. Design examples are provided to verify the effectiveness of the proposed methods, with comparisons drawn with a GA-based design method.

Design of wide-band arrays for low side-lobe level beam patterns by simulated annealing

We address the window design problem of linear arrays to be used in wide-band beamforming systems. During last decades, stochastic optimization algorithms have proven to be very efficient in optimal beamforming synthesis, but most research interest has focused on linear and two-dimensional arrays under narrow-band excitation. In the present paper, we introduce a general approach, based on the simulated annealing optimization algorithm, to design uniformly spaced wide-band arrays that generate low side-lobe level beam patterns. The effectiveness of different beam pattern formulations is evaluated within the proposed framework; we also consider three different methods to control the side-lobe level, yielding different array performances. Moreover, we investigate the influence of the frequency bandwidth on the optimized beam patterns.