Design Of Communication Systems Research Articles

Exploring and Analyzing a Hybrid PAPR Reduction Method for OFDM Optimization

Orthogonal Frequency Division Multiplexing (OFDM) is a effective modulation technique widely used in modern communication systems, including 5G and wireless networks because of its high spectral efficiency and robustness towards multipath fading. However, OFDM signals are characterized by a high Peak-to-Average Power Ratio (PAPR), which can severely impact the power efficiency and operational cost of these systems. This research investigates and analyse effectiveness of two conventional PAPR reduction methods that is Selective Mapping (SLM), and Partial Transmit Sequence (PTS) with incorporating their approach of PAPR reduction to develop a hybrid variant: SLM-PTS. This study utilized MATLAB simulations to implement and test each PAPR reduction technique on a standard OFDM system model. Parameters such as the number of subcarriers, oversampling factor, and modulation types were systematically varied to analyze the impact on PAPR, BER, and computational complexity. The effectiveness of each technique was measured using the Complementary Cumulative Distribution Function (CCDF) of PAPR values and BER performance under different channel conditions. Key findings reveal that hybrid techniques, particularly SLM & PTS, offer significant improvements in PAPR reduction compared to traditional methods alone, without a corresponding increase in BER or computational overhead. The research underscores the potential of hybrid PAPR reduction techniques to significantly enhance the efficiency and reliability of OFDM systems. These findings have important implications for the design and optimization of next-generation wireless communication systems, suggesting that hybrid approaches can provide a balanced solution to the longstanding issue of PAPR in OFDM transmissions. This study contributes valuable insights into the practical application of combined PAPR reduction strategies, offering a pathway toward more power-efficient and robust OFDM technologies. Keywords : OFDM, PAPR, CCDF, SLM and PTS

A three‐dimensional parabolic equation with fast reordered‐alternate direction decomposition in atmosphere duct environment

AbstractIn the design and optimisation of marine wireless communication and navigation systems, a thorough investigation of radio wave propagation characteristics under atmospheric ducting conditions is essential. The authors aim to enhance the efficiency of radio wave propagation loss prediction in marine atmospheric ducting environments, proposing a prediction model based on Fast Reordered‐Alternate Direction Decomposition (FR‐ADD). By approximating the diffraction term into three independent components, exploiting the commutative properties of the Fourier transform to reduce the spatial dimensions, and incorporating a rapid algorithm for the parabolic equation, the model optimises the stepping process and significantly improves computational efficiency. Simulation experiments demonstrate that, in the long‐distance and complex marine ducting environments, the model not only maintains prediction accuracy but also substantially reduces computational load and prediction time, effectively realising over‐the‐horizon propagation prediction. In the experiment of radio wave propagation characteristics in the Yellow and Bohai Seas, the simulation data from the FR‐ADD model showed significant correlation with actual measurements and simulations from the AREPS software, confirming the method's efficiency and practicality.

Theoretical and numerical study on transient acoustic wave propagation across ice layers in the Arctic Ocean.

The study of transient acoustic wave propagation across the Arctic Ocean ice layer provides theoretical guidance for the design of trans-ice acoustic communication systems. In this study, the Arctic Ocean was modeled as an ice-water composite structure, where the ice and water are regarded as an elastic solid and liquid, respectively. An analytical transient solution for acoustic wave propagation in this structure was derived using the eigenfunction expansion method. Further, the numerical procedures were presented and used to analyze the acoustic wave propagation characteristics across the ice layer. The results show that waveforms corresponding to the radial displacements are more severely distorted than the axial displacements. The amplitudes of the radial and axial displacements decreased rapidly with increasing propagation distance. The ice thickness had a greater impact on the radial displacement than axial displacement; the thicker the ice, the greater the distortion for both radial and axial displacements.

Bidirectional trifunctional splitter with two sided microstructure

This paper proposes a bidirectional trifunctional splitter with a bilayer ridge structure for polarization-selective and polarization-insensitive outputs at the wavelength of 1550 nm. The configuration can realize a four-port output for both polarizations and TE-two/TM-three output. In the upper part of the bidirectional trifunctional splitter, for TE polarization, two outputs exhibit diffraction efficiencies greater than 49%, while for TM polarization, three outputs exhibit diffraction efficiencies greater than 32%. Furthermore, for the lower part of this beam splitter, under both TE and TM polarization, the diffraction efficiencies of four outputs exceed 24%. Compared to the previous beam splitter, the bidirectional trifunctional splitter exhibits superior uniformity and is capable of simultaneously achieving polarization-selective and polarization-insensitive outputs. Furthermore, the configuration is theoretically resistant to the geometric dimensions, which greatly reduces the difficulty of fabrication. This work exhibits a novel approach to the design of energy-splitting devices and optical communication systems with multiple outputs.

End-to-end learning of adaptive coded modulation schemes for resilient wireless communications

Adaptive modulation and coding schemes play a crucial role in ensuring robust data transfer in wireless communications, especially when faced with changes or interference in the transmission channel. These schemes involve the use of variable coding rates, which can be achieved normally through code puncturing or shortening, and have been adopted in 4G and 5G communication standards. In recent works, auto-encoders for wireless communications have demonstrated the ability to learn short code representations that achieve gains over conventional codes. Such a methodology is attractive as it can learn optimal representations under a variety of channel conditions. However, due to its structure the auto-encoder does not currently support multiple code rates with a single model. This article draws upon the discipline of multi-task learning, as it applies to deep learning and therefore devises a branching architecture for the auto-encoder and custom training algorithm in training transmitter and receiver for adaptive modulation and coding. In this article we aim to demonstrate improvements in Block Error Rate over conventional methods in the Additive White Gaussian Noise channel, and to analyse the performance of the model under Rayleigh fading channels without retraining the auto-encoder on the new channel. This article demonstrates a novel approach towards training auto-encoder models to jointly learn adaptive modulation and coding schemes framed as a multi-task learning problem. The research outcomes extend end-to-end learning approaches to the design of adaptive wireless communications systems.

Модели расчета распределения уровня мощности электромагнитного поля в системах подвижной радиосвязи для малых дистанций в летний период

The statement is substantiated that for the design of mobile radio communication systems at short distances up to 1 000 m, the main recommended calculation models have a significant error, since they were created for calcula-tions of long distances (as a rule, from 1 to 50 km) and have limitations in application. Due to the fact that at the present stage of development of mobile radio communication systems, the frequency ranges are in intensive research and use not only 900 and 1 800 MHz, but also 450-800 MHz sections, as well as from 2 100 to 6 000 MHz, which were not previously used for cellular communication systems, it is necessary to propose additional models necessary for the preliminary design of 3-5 generation systems in the range from 2 100 MHz. The range of radio waves in the ranges from 2 100 to 6 000 MHz is significantly reduced compared to the ranges of 1 800 or 900 MHz. The use of classical calculation models such as the Okumura and COST-231–Hata models at distances less than 1 km is characterized by significant errors and is not recommended by the authors of the models themselves for use at short distances. To solve this problem, new models have been developed for calculating the attenuation of radio signals designed to estimate attenuation at short distances.

Design and Evaluation of Device Authentication and Secure Communication System with PQC for AIoT Environments

With the rapid development of Internet of Things (IoT) technology, the number of IoT users is growing year after year. IoT will become a part of our daily lives, so it is likely that the security of these devices will be an important issue in the future. Quantum computing is maturing, and the security threat associated with quantum computing will be faced in the transmissions of IoT devices, which mainly use wireless communication technologies. Therefore, to ensure the protection of transmitted data, a cryptographic algorithm that is efficient in defeating quantum computer attacks needs to be developed. In this paper, we propose a device authentication and secure communication system with post-quantum cryptography (PQC) for AIoT environments using the NTRU and Falcon signature mechanism, which can resist quantum computer attacks and be used in AIoT environments to effectively protect the confidentiality, integrity, and non-repudiation of transmitted data. We also used Raspberry Pi to simulate AIoT devices for implementation.

Joint Radar Jamming and Communication System Design Based on Universal Filtered Multicarrier Chirp Waveform

In this article, we propose a joint waveform based on universal filtered multicarrier (UFMC) chirp for radar jamming and communication joint systems. Modulation of radar jamming chirp signals and communication signals on different subcarrier groups in the UFMC sub-band is used to achieve the waveform design. The jamming signal in the waveform contains a frequency shift coefficient that depends on the delay time, which can effectively improve the anti-frequency hopping ability and enhance the overall jamming efficiency. Simultaneously jamming signals can provide assistance in channel estimation and equalization of communication, improving the information transmission quality of communication subsystems. We concluded through reasonable trade-off analysis that the combined weight of radar jamming and communication is closely related to the overall performance of the waveform. The simulation results show that the proposed UFMC chirp synthesized waveform has good jamming and communication performance. Software defined radio (SDR) simulation experiments demonstrated the effectiveness of this method in practical environments.

Exploring optical soliton solutions in highly dispersive couplers with parabolic law nonlinear refractive index using the extended auxiliary equation method

This study delves into the realm of optical soliton solutions within the intricate framework of highly dispersive couplers integrated with optical metamaterials featuring a parabolic law nonlinear refractive index. Employing the extended auxiliary equation method, the investigation systematically unveils various soliton solutions, including dark solitons, bright solitons, singular solitons, and a distinctive amalgamation of bright and singular solitons. The results illuminate the diverse dynamics of solitons in these complex systems, offering crucial insights into the interplay among dispersion, nonlinearity, and metamaterial characteristics. Beyond enhancing the theoretical understanding of soliton behavior in optical metamaterial couplers, the findings hold practical significance by potentially influencing the design and optimization of optical communication devices and systems.

Enhanced-GNN With Angular CSI for Beamforming Design in IRS-Assisted mmWave Communication Systems

Enhanced-GNN With Angular CSI for Beamforming Design in IRS-Assisted mmWave Communication Systems

An Innovative Lift Control Board Design and Prototype Production Using CANbus Communication System and STM32 Microcontroller

In this study, Önder Group Inc. Design Center, with an innovative approach, designed controllers for the first time, and prototypes were produced for a wide range of goods lifts according to different needs. With the innovative board design, goods lift users can choose parameters such as the number of floors, door types, and lock types from a user-friendly menu to suit their needs. Within the scope of the study, all functions that may be needed were identified, and the hardware structure of the system was determined. By simply changing the defined parameters, the desired goods lift controller can be made ready in a very short time. Time savings were achieved by simply expanding the hardware structure with the design of the CANbus communication system according to the number of floors and stops of the elevators. Thus, a wide range of lifts can be used by simply increasing the number of floor announcer boards and selecting the menu. Additionally, thanks to the designed Wi-Fi plug-in software, operators will be able to monitor the malfunction and operating status of the lift. With this plug-in, technical service teams can intervene immediately in case of malfunction.

Erlang-U: Blocking Probability of UAV-Assisted Cellular Systems

In modern and future communication systems, we expect peaks of traffic that largely exceed the capacity of the system, since they are originally designed to support normal traffic loads. Such peaks can be caused by emergency events and cultural or sporting gatherings, among others. Indeed, implementing more channels than the ones required in normal traffic conditions would entail higher costs and energy consumption. As such, when a traffic peak arrives, the system performance is greatly affected. To this end, we propose the use of mobile channels that assist cellular systems to increase the capacity of the network for a certain period. In this paper, we derive the blocking probability of a UAV (Unmanned Aerial Vehicle)-assisted cellular system to temporarily increase the capacity of the communication network in case of a traffic overload. The analysis presented in this work allows a careful design of future communication systems requiring fewer channels, that can serve users in normal traffic load conditions while using UAVs to maintain an adequate blocking probability when the traffic load increases. To this end, we develop the ErlangU formula, similar to the ErlangB formula for a conventional voice service cellular system.

A comprehensive review of energy-efficient design in satellite communication systems

Satellite communication systems play a pivotal role in enabling global connectivity, but their energy consumption presents significant challenges in terms of sustainability and operational costs. This comprehensive review explores various aspects of energy-efficient design in satellite communication systems to address these challenges. Beginning with an overview of the fundamentals of energy efficiency in satellite communications, including key metrics and parameters, the review delves into the analysis of energy consumption across different subsystems. Strategies for optimizing energy efficiency in transmission protocols, modulation schemes, power management, and control are examined, along with case studies showcasing successful implementations. Emerging technologies and trends in satellite communication are explored for their potential to enhance energy efficiency. Regulatory and environmental considerations are also discussed, emphasizing the importance of aligning energy-efficient design with regulatory frameworks and addressing environmental impacts. Ultimately, this review highlights the importance of prioritizing energy efficiency in satellite communication system design to mitigate environmental impact, reduce operational costs, and ensure sustainability in an increasingly interconnected world.

Channel Modeling Based on Transformer Symbolic Regression for Inter-Satellite Terahertz Communication

Channel modeling is crucial for inter-satellite terahertz communication system design. The conventional method involves manually constructing a mathematical channel model, which is labor-intensive, and using a neural network directly as a channel model lacks interpretability. This paper introduces a channel modeling approach based on symbolic regression. It is the first time that using transformer neural networks as the implementation tool of symbolic regression to generate the mathematical channel model from the channel data directly. It can save manpower and avoid the interpretability issue of using neural networks as a channel model. The feasibility of the proposed method is verified by generating a free space path loss model from simulation data in the terahertz frequency band.

Coherent Chaotic Communication Using Generalized Runge–Kutta Method

Computer simulation of continuous chaotic systems is usually performed using numerical methods. The discretization may introduce new properties into finite-difference models compared to their continuous prototypes and can therefore lead to new types of dynamical behavior exhibited by discrete chaotic systems. It is known that one can control the dynamics of a discrete system using a special class of integration methods. One of the applications of such a phenomenon is chaos-based communication systems, which have recently attracted attention due to their high covertness and broadband transmission capability. Proper modulation of chaotic carrier signals is one of the key problems in chaos-based communication system design. It is challenging to modulate and demodulate a chaotic signal in the same way as a conventional signal due to its noise-like shape and broadband characteristics. Therefore, the development of new modulation–demodulation techniques is of great interest in the field. One possible approach here is to use adaptive numerical integration, which allows control of the properties of the finite-difference chaotic model. In this study, we describe a novel modulation technique for chaos-based communication systems based on generalized explicit second-order Runge–Kutta methods. We use a specially designed test bench to evaluate the efficiency of the proposed modulation method and compare it with state-of-the-art solutions. Experimental results show that the proposed modulation technique outperforms the conventional parametric modulation method in both coverage and noise immunity. The obtained results can be efficiently applied to the design of advanced chaos-based communication systems as well as being used to improve existing architectures.

Crosstalk mitigation of a controllable annular auto-focusing vortex beam array in a turbulent atmosphere.

In this paper, we introduce a new type of controllable auto-focusing vortex beam array named annular quasi-Airy vortex beam array (QAVBA), which can reduce the crosstalk among different orbital angular momentum (OAM) modes of optical vortex. The effects of initial beam parameters of annular QAVBA and propagation conditions on the OAM mode propagation performance are investigated. The results indicate that the topological angle θ, the topological charge m, and the decay parameter α could manipulate the auto-focusing characteristics of annular QAVBA and regulate the crosstalk of OAM modes. The crosstalk among OAM modes increases with the turbulence strength. Interestingly, the annular QAVBA with obtuse topological angle is favorable for the OAM mode transmitting at far propagation distance or in strong atmospheric turbulence when the decay parameter α is large enough for the energy of annular QAVBA mainly concentrating on the main light ring. Our research provides a reference for optimizing the design of light sources and free-space optical communication system with annular QAVBA.

Investigation of Costas loop phase deviation effect on BER performance of space downlink coherent communication system with DPSK scheme

The Costas loop is an important technology for synchronous demodulation in space coherent communication. However, due to the limitation of the loop device and processing technology, it is difficult to achieve high-precision locking, which results in the Costas loop phase deviation and further affects the quality of the demodulation signal. In this paper, a closed-form bit error rate (BER) model is derived to evaluate the Costas loop phase deviation effect on BER performance in the space differential phase shift keying (DPSK) modulation and heterodyne detection communication system, considering laser phase noise, atmospheric turbulence, and detector noise. Based on the BER model, analytical solution simulation is conducted. The results show that the BER performance deteriorates varying with the increase of the Costas loop phase deviation. In addition, we research how to better balance the laser linewidth and Costas loop accuracy in the system design to ensure good communication status. We find that the wider the laser linewidth, the more stringent the Costas loop accuracy. Furthermore, the BER performance versus the Costas loop phase deviation under different satellite-to-ground communication system parameter settings including divergence angle, receiving aperture, signal laser power, and data rate are analyzed. This work provides valuable references for space optical coherent communication systems design.

Практические аспекты построения систем беспроводной подводной оптической связи для телекоммуникационных приложений

The overview of the principles of organizing underwater wireless optical communication is presented in the paper. The basic features of the optical communication system design with the usage of laser and LED emitters working in the visible range, as well as using various types of modulation, are considered. A comparative review of the developments of underwater wireless optical communication systems, operating at distances up to one hundred meters and with data transfer rates up to tens of Gbit/s, is presented. In addition, a comparative review of design of underwater optical modems is considered. It is shown, that the further prospect of their development is the combination of various methods of underwater wireless communication, including the use of MIMO technology.

IMPLEMENTACIÓN DE UN SISTEMA DE COMUNICACIÓN Y VIDEOVIGILANCIA INTEGRADO EN UN UAV PARA MISIONES ESTRATEGICAS

Unmanned Aerial Vehicles (UAVs) have been widely used in the military for monitoring and national defence activities. One of the main advantages of using UAVs is that they reduce loss of life, as they can be controlled remotely or with the help of algorithms, allowing high-risk manoeuvres to be carried out without fatal consequences. One of the objectives of using UAV systems is to reduce the costs of acquiring and operating conventional aircraft. One of the main problems in the development of UAVs the design and dimensioning of communication systems. This paper presents the development of a communication system for strategic missions with the validation of the communication link calculated through the implementation of a video surveillance system integrated in a UAV. The equipment of the communication and video transmission system was based on free commercial hardware and free software that allows the sending of high-resolution images. The UAV operation tests have allowed maintaining the telemetry link and high-quality video transmission at approximately 5 km. Key Words: energy efficiency, historic districts, 3D cities, building typology, categorization tool

Coexistence Designs of Radar and Communication Systems in a Multi-Path Scenario

Coexistence Designs of Radar and Communication Systems in a Multi-Path Scenario