Alveolar Socket Research Articles

Effect of Local Zoledronic Acid Application in Alveolar Bone Healing: An Experimental Study.

This experimental study aimed to assess the three-dimensional and histological changes of the alveolar socket with local application of ZA. Nine male New Zealand white rabbits were randomly allocated into 4-, 8-, and 12-week groups after the extraction of 4 incisor teeth. The upper and lower right sockets were filled with ZA + collagen sponge (ZA-CS group), while the left sockets were filled with collagen sponge alone (CS group) postoperatively. At 4, 8, and 12 weeks (T1, T2, and T3) after the extraction, radiographic and histomorphometric evaluations were conducted for both groups. The increase in alveolar bone density of the ZA-CS group at T2 and T3 was significantly higher than the CS group (P＜0.01). Three-dimensional evaluations demonstrated no statistically significant differences in ridge height and width between the 2 groups at T2 and T3. On histological evaluation, the ZA-CS group included significantly fewer TRAP-positive cells than the CS group at T1 (P＜0.05). In ALP staining, all cases in both groups were classified as positive at each time point. Masson trichrome staining showed significantly higher mean red collagen volume fraction in the ZA-CS group (76.09%, 79.64%) than in the CS group (66.17%, 69.22%) at T2 and T3, respectively (P＜0.05 and ＜0.01). Although local ZA application with collagen sponge did not reduce alveolar ridge contraction, it improved the bone density and maturity of newly formed bone after tooth extraction.

Comparative Study of Photobiomodulation Effects on Alveolar Socket Hard Tissue Healing in Rats: Application of 980 nm Versus 810 nm Lasers.

Background: This study aimed to explore the differential effects of photobiomodulation (PBM) via 980 nm and 810 nm lasers on the hard tissue healing of rat alveolar sockets, with a focus on a comparative analysis of hard tissue regeneration and osteogenic gene expression. Objective: This study aimed to explore the effects of PBM using 980 nm and 810 nm lasers on hard tissue healing of rat alveolar sockets, focusing on hard tissue regeneration and osteogenic gene expression. Materials and Methods: Thirty-six male Wistar rats (5 weeks old) had both right and left maxillary first molars extracted. Post extraction, the right alveolar sockets received PBM treatment with either 980 nm (0.3 W, 18 J/cm2) or 810 nm (0.1 W, 6 J/cm2) lasers for seven days, whereas the left sockets served as controls. Rats were euthanized on days 3, 7, 14, and 28 for histopathological, immunohistochemical, micro computed tomography (micro-CT), and quantitative polymerase chain reactionanalyses. Results: On day 3, early granulation tissue, neovascularization, and inflammatory cell aggregates were observed in all groups. By day 7, active osteoclasts and osteoblasts were noted, with a significant increase in CD31-positive cells in the 980 nm group (p < 0.05). Day 14 showed new bone formation, and by day 28, increased cancellous bone and collagen content were present in all groups, with no significant differences between them (p > 0.05). Gene expression analysis revealed higher BMP-2 and Runx-2 levels in laser-treated groups on day 14 (p < 0.05), with the 980 nm group having higher BMP-2 levels than the 810 nm group (p < 0.05). Bone sialoprotein expression was higher in laser-treated groups on days 14 and 28 (p < 0.05), and osteocalcin expression was highest in the 980 nm group on both days (p < 0.05). Micro-CT analysis showed no significant differences among groups in bone mineral density, bone surface (BS)/bone volume (BV), or bone volume (BV)/TV (total volume) indices. Conclusion: PBM with 980 nm and 810 nm lasers promotes early-stage hard tissue healing in extraction sockets, with the 980 nm laser more effectively enhancing osteogenic gene expression, suggesting its potential as an adjunctive therapy in dental and oral surgery.

Micro-XCT analysis of anatomical features and dimensions of the incisive canal: implications for dental implant treatment in the anterior maxilla

BackgroundThis study used micro-focus X-ray Computed Tomography (micro-XCT) to examine the anatomical differences and dimensions of the maxillary incisive canal (MIC) in a South African population. The accurate imaging yielded dependable results that support earlier research and enhance anterior maxilla surgery planning. Furthermore, these anatomical features are compared between various racial and gender groupings in the study.MethodsUsing a micro-XCT scanner, 108 human cadaver skulls from the Pretoria Bone Collection were scanned and included in the study. Advanced volume rendering software was employed for measuring the MIC length, diameter, shape, and the buccal bone wall measurements in relation to the MIC.ResultsSignificant anatomical variation in the size and shape of the MIC was identified in the population, with variations seen between racial and gender groups. The incisive foramen (ICO) mean diameter was 6.61 mm, and the MIC length varied from 4.96 to 20.10 mm. There were significant differences in the buccal alveolar bone height between different ethnic groups and gender. Regarding morphological patterns in coronal and sagittal views, single canals were more common in the black population while Y-shaped canals were more common in the white population. The study also introduced a new metric by measuring the mean distances between teeth #11 and #21 and the ICO (1.83 mm and 1.88 mm respectively).ConclusionsThe complex anatomical differences of the MIC in a South African population were clarified. Clinicians should be aware of tooth sockets in near proximity to the MIC and perform accurate preoperative assessment using sophisticated 3-D imaging and preferable guided implant placement in the anterior maxilla.

NLRP3 deficiency improves bone healing of tooth extraction sockets through SMAD2/3-RUNX2 mediated osteoblast differentiation.

Impaired bone healing following tooth extraction poses a significant challenge for implantation. As a crucial component of the natural immune system, the NLRP3 inflammasome is one of the most extensively studied Pattern-Recognition Receptors (PRRs), and is involved in multiple diseases. Yet, the role of NLRP3 in bone healing remains to be clarified. Here, to investigate the effect of NLRP3 on bone healing, we established a maxillary first molar extraction model in wild-type (WT) and NLRP3KO mice using minimally invasive techniques. We observed that NLRP3 was activated during the bone repair phase, and its depletion enhanced socket bone formation and osteoblast differentiation. Moreover, NLRP3 inflammasome activation was found to inhibit osteogenic differentiation in alveolar bone-derived mesenchymal stem cells (aBMSCs), an effect mitigated by NLRP3 deficiency. Mechanistically, we established that SMAD2/3-RUNX2 signaling pathway is a downstream target of NLRP3 inflammasome activation, and SMAD2/3 knockdown partially reversed the significant decrease in expression of RUNX2, OSX, and ALP induced by NLRP3. Thus, our findings demonstrate that NLRP3 negatively modulates alveolar socket bone healing and contribute to the understanding of the NLRP3-induced signaling pathways involved in osteogenesis regulation.

A small venomous reptile from the Late Triassic (Norian) of the southwestern United States.

Reptile feeding strategies encompass a wide variety of diets and accompanying diversity in methods for subduing prey. One such strategy, the use of venom for prey capture, is found in living reptile clades like helodermatid (beaded) lizards and some groups of snakes, and venom secreting glands are also present in some monitor lizards and iguanians. The fossil record of some of these groups shows strong evidence for venom use, and this feeding strategy also has been hypothesized for a variety of extinct reptiles (e.g., archosauromorphs, anguimorphs, and a sphenodontian). However, evidence of systems for venom delivery in extinct groups and its evolutionary origins has been scarce, especially when based on more than isolated teeth. Here, we describe a potentially venomous new reptile, Microzemiotes sonselaensis gen. et sp. nov., from a partial left dentary recovered from the Sonsela Member of the Chinle Formation (middle Norian, Upper Triassic) of northeastern Arizona, U.S.A. The three dentary teeth have apices that are distally reclined relative to their bases and the tip of the posteriormost tooth curves mesially. The teeth show subthecodont implantation and are interspaced by empty sockets that terminate above the Meckelian canal, which is dorsoventrally expanded posteriorly. Replacement tooth sockets are positioned distolingually to the active teeth as in varanid-like replacement. We identify this new specimen as a diapsid reptile based on its monocuspid teeth that lack carinae and serrations. A more exclusive phylogenetic position within Diapsida is not well supported and remains uncertain. Several features of this new taxon, such as the presence of an intramandibular septum, are shared with some anguimorph squamates; however, these likely evolved independently. The teeth of the new taxon are distinctively marked by external grooves that occur on the entire length of the crown on the labial and lingual sides, as seen in the teeth of living beaded lizards. If these grooves are functionally similar to those of beaded lizards, which use the grooves to deliver venom, this new taxon represents the oldest known reptile where venom-conducting teeth are preserved within a jaw. The teeth of the new species are anatomically distinct from and ~10x smaller than those of the only other known Late Triassic hypothesized venomous reptile, Uatchitodon, supporting venom use across multiple groups of different body size classes. This new species represents the third Late Triassic reptile species to possibly have used envenomation as a feeding (and/or defensive) strategy, adding to the small number of venomous reptiles known from the Mesozoic Era.

Tomographic and Electron Microscopy Description of Two Bone-Substitute Xenografts for the Preservation of Dental Alveoli.

After tooth extraction, bone levels in the alveoli decrease. Using a bone substitute can help minimize this bone loss. The substitute can be sourced from a human or animal donor or synthetically prepared. In this study, we aimed to address the following PICOS question: In patients needing dental alveolar preservation for implant placement, how does alveolar preservation using a bovine hydroxyapatite bone xenograft with collagen compare to a xenograft without collagen in terms of changes in alveolar height and width, bone density, and the characteristics of the bone tissue observed in biopsies taken at 6 months? We evaluated two xenograft-type bone substitutes for preserving post-extraction dental sockets using tomography and microscopy to answer that question. A total of 18 dental alveoli were studied: 11 preserved with a xenograft composed of apatite (InterOss) and 7 with a xenograft composed of apatite-collagen (InterOss Collagen). Tomographic controls were performed at 1 and 6 months, and microscopic studies were performed on 13 samples. The biopsies were examined with scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). A Multivariate Analysis of Variance (MANOVA) was conducted in the statistical analysis, revealing a significant increase in bone density over time (p = 0.04). Specifically, bone density increased from an average of 526.14 HU at 30 days to 721.96 HU at 60 days in collagen-free samples. However, no statistically significant differences in height or width were found between groups. The MANOVA results indicated that the overall model had a low predictive ability for height, width, and density variables (R-squared values were low), likely due to sample size limitations and the complexity of bone tissue dynamics. On the other hand, FTIR analysis revealed the presence of phosphate groups, carbonates, and amides I, II, and III, indicative of inorganic (hydroxyapatite) and organic (type I collagen) materials in the xenografts. TGA and DSC showed high thermal stability, with minimal mass loss below 150 °C. Finally, both xenografts were influential in alveolar bone regeneration after extraction without significant differences. The trend of increasing collagen density suggests an effect that requires further investigation. However, it is recommended that the sample size be increased to enhance the validity of the results.

Dental morphology evolution in early peratheriines, including a new morphologically cryptic species and findings on the largest early Eocene European metatherian

ABSTRACT The initial stages of the evolutionary history of peratheriines, the European herpetotheriid metatherians, are largely unknown, primarily due to their limited morphological dental disparity throughout the Palaeogene, coupled with significant intraspecific variation. Based on eleven molars, we document a new early peratheriine species, Peratherium musivum sp. nov. which is larger than and morphologically similar to the earliest peratheriine, Peratherium constans (MP7). Subtle molar characters are shared with the largest early Eocene peratheriine, Peratherium maximum comb. nov. We illustrate the importance of studying possible changes in molar cusp – basin proportions and correlated characters that occured during peratheriine evolution. Peratherium musivum sp. nov. which spanned only part of the MP7-MP8 + 9 time interval, and the ~MP8 + 9 Peratherium maximum comb. nov. were probably widespread in Western Europe. The description of a well-preserved mandible of the latter, from La Borie (~MP8 + 9), reveals original features concerning relative size and shape of dental alveoli, partly corroborated using isolated molars. These traits are absent in the younger, most representative species of both peratheriine genera, Peratherium and Amphiperatherium. Based on the aforementioned data and a critical review, it is demonstrated that peratheriine genera lack consistent definitions, so that the Peratherium/Amphiperatherium dichotomy is plausibly inapplicable to early Eocene representatives. This article is registered in ZooBank under urn:lsid:zoobank.org:pub:A2B4DE58-855C-4CB8-BC1D-C9677E6DF97D

Comparative Histological Analysis of Dentine-Derived Tooth Grafts in Maxillary vs Mandibular Socket Preservation: A Retrospective Study of 178 Cases.

(1) Background: In recent years, there has been a growing interest in tooth-derived materials as valuable alternatives to synthetic biomaterials for preventing alveolar ridge dimensional changes. This study aimed to evaluate the histological and clinical differences between alveolar ridge preservation procedures in the maxilla and mandible using demineralized dentin treated with Tooth Transformer®. (2) Methods: A total of 178 patients in good general health were enrolled, with 187 post-extractive sockets lacking buccal and/or palatal bone walls. Alveolar socket preservation procedures and histological evaluations were performed. The sites were divided into two groups: Group A (99 mandibular samples) and Group B (108 maxillary samples). After 5 months (±1 month), single bone biopsies were performed for histologic and histomorphometric analysis. (3) Results: Clinical outcomes demonstrated a good healing of hard and soft tissues with an effective maintenance of bone architecture in both groups. Histomorphometric analysis revealed a total bone volume of 50.33% (±14.86) in Group A compared to 43.53% (±12.73) in Group B. The vital new bone volume was 40.59% (±19.90) in Group A versus 29.70% (±17.68) in Group B, with residual graft dentin material volume at 7.95% (±9.85) in Group A compared to 6.75% (±9.62) in Group B. (4) Conclusions: These results indicate that tooth-derived material supports hard tissue reconstruction by following the structure of the surrounding bone tissue. A 6.8% difference observed between the maxilla and mandible reflects the inherent disparities in natural bone structures in these regions. This suggests that the bone regeneration process after tooth extraction adheres to an anatomical functional pattern that reflects the specific bone characteristics of each area, thus contributing to the preservation of the morphology and functionality of the surrounding bone tissue.

DENTAL IMPLANT INSERTION – HOW TO PLAN AND PREDICT SUCCESS

For decades, implant placement protocols and implant loading protocols were addressed independently from one another. With the healing of the alveolar socket post-extraction, the implant placement protocol and the surgical technique are determining factors for selection of an appropriate implant loading protocol; these should be considered as codependent variables. The objectives of the study were to highlight factors influencing the implant placement and loading protocol. Material and methods. The retrospective study included patients presented for teeth extraction and oral rehabilitation treatment plan that included implant restorations between October 2020 and October 2022. Factors influencing implant placement and loading protocol were analyzed for each case. Representative cases were presented with details. Results. 10 clinical cases were included in the study, in which implanto-prosthetic treatment was performed using different insertion protocols. Three representative cases were presented. Conclusions. Implant insertion protocols are closely related to multiple factors, so the clinician nowadays must carefully decide the time elapsed from tooth extraction to the moment of dental implant insertion. The insertion protocol should be chosen only if the factors influencing that protocol led to the success of the implant-prosthetic treatment.

Effect of postoperative 660-nm low-level laser therapy on the radiographic crestal bone loss of fresh-socket dental implants.

Although the benefits of low-level laser therapy (LLLT) in soft tissue healing have been demonstrated, the effects of laser on bone have remained controversial. This study investigated the impact of postoperative 660-nm LLLT on the radiographic crestal bone loss of fresh-socket dental implants. Thirty patients referred to the Department of Oral and Maxillofacial Surgery for tooth extraction and placement of fresh-socket implants were selected and assigned to two groups: laser (intervention) and no-laser (control) groups. Immediately after tooth extraction, the implant was inserted into the tooth socket. 660-nm LLLT was immediately started after surgery and was repeated three times per week for two weeks. Bone quantification at the implant site was assessed using periapical intraoral radiographs and computerized software immediately after surgery and after six months. This study showed a statistically significant difference in mean bone resorption between the mesial and distal aspects of the two groups, with lower bone resorption in the laser group compared to the no-laser group. The results of this study suggest that LLLT can effectively reduce bone resorption in fresh-socket implant placement. This might indicate the positive effect of LLLT on bone resorption reduction.

Control of alveolar bone development, homeostasis, and socket healing by salt inducible kinases.

SIK2/SIK3 deletion in alveolar bone reduces bone formation and mass by impairing osteoblast maturation, unlike in long bones, where it increases bone formation and mass.

The efficiency of two different synthetic bone graft materials on alveolar ridge preservation after tooth extraction: a split-mouth study

BackgroundAlveolar Bone loss occurs frequently during the first six months after tooth extraction. Various studies have proposed different methods to reduce as much as possible the atrophy of the alveolar ridge after tooth extraction. Filling the socket with biomaterials after extraction can reduce the resorption of the alveolar ridge. We compared the height of the alveolar process at the mesial and distal aspects of the extraction site and the resorption rate was calculated after the application of HA/β-TCP or synthetic co-polymer polyglycolic - polylactic acid PLGA mixed with blood to prevent socket resorption immediately and after tooth extraction.MethodsThe study was conducted on 24 extraction sockets of impacted mandibular third molars bilaterally, vertically, and completely covered, with a thin bony layer. HA/β-TCP was inserted into 12 of the dental sockets immediately after extraction, and the synthetic polymer PLGA was inserted into 12 of the dental sockets. All sockets were covered completely with a full-thickness envelope flap. Follow-up was performed for one year after extraction, using radiographs and stents for the vertical alveolar ridge measurements.ResultsThe mean resorption rate in the HA/β-TCP and PLGA groups was ± 1.23 mm and ± 0.1 mm, respectively. A minimal alveolar bone height reduction of HA/β-TCP was observed after 9 months, the reduction showed a slight decrease to 0.93 mm, while this rate was 0.04 mm after 9 months in the PLGA group. Moreover, the bone height was maintained after three months, indicating a good HA/β-TCP graft performance in preserving alveolar bone (1.04 mm) while this rate was (0.04 mm) for PLGA.ConclusionThe PLGA graft demonstrated adequate safety and efficacy in dental socket preservation following tooth extraction. However, HA/β-TCP causes greater resorption at augmented sites than PLGA, which clinicians should consider during treatment planning.

Spontaneous bacterial peritonitis and soft tissue healing after tooth extraction in liver cirrhosis patients

The objective of this study was to identify the association between tooth extraction and occurrence of spontaneous bacterial peritonitis (SBP) and to assess delayed soft tissue healing of extraction sockets in patients with cirrhosis. One hundred nineteen participants awaiting liver transplantation who required tooth extraction were included. Seven days before the surgery, the patients underwent panoramic radiography and laboratory examinations. Soft tissue healing was evaluated 7 days after the tooth extraction and medical records were checked after 21 days for development of SBP. The relationship between predictive factors and outcomes was assessed by using multiple binomial logistic regression. One hundred ninety-five teeth were extracted, resulting in 146 alveolar wounds, in which the majority (47%) consisted of alveolar sockets of multirooted teeth. One participant was diagnosed with SBP (Escherichia coli [E. coli]) and another diagnosed with bacterascites (Streptococcus viridans [S. viridans] group), occurring 11 and 6 days after tooth extraction. Poor soft tissue healing was observed in 20 (13.7%) patients, which was correlated to 2 risk factors, that is, jaundice (P = .007, adjusted odds ratio [OR] = 4.91, 95% confidence interval [CI] = 1.56-15.47) and moderate neutropenia (P = .048, adjusted OR = 13.99, 95% CI = 1.02-192.07). No association was found between tooth extraction and SBP in patients with cirrhosis. The delayed soft tissue healing was related to jaundice (hyperbilirubinemia) and moderate neutropenia.

Lidocaine HCl-Loaded Polyelectrolyte Complex -Poloxamer Thermoresponsive Hydrogel: In Vitro- In Vivo Anesthetic Evaluations for Tooth Socket Wound Delivery.

Local anesthesia is essential in dental practices, particularly for managing pain in tooth socket wounds, yet improving drug delivery systems remains a significant challenge. This study explored the physicochemical characteristics of lidocaine hydrochloride (LH) incorporated into a polyelectrolyte complex and poloxamer thermosensitivity hydrogel, assessing its local anesthetic efficacy in mouse models and its onset and duration of action as topical anesthetics in clinical trials. The thermoresponsive hydrogel exhibited a rapid phase transition within 1-3minutes and demonstrated pseudo-plastic flow behavior. Its release kinetics followed Korsmeyer-Peppas, with 50% of biodegradation occurring over 48h. In mouse models, certain thermogels showed superior anesthetic effects, with rapid onset and prolonged action, as evidenced by heat tolerance in tail-flick and hot plate models. In clinical trials, the LH-loaded thermoresponsive hydrogel provided rapid numbness onset, with anesthesia (Ton) beginning at an average of 46.5 ± 22.5seconds and lasting effectively (Teff) for 202.5 ± 41.0seconds, ranging from 120 to 240seconds, indicating sustained release. These results highlight the promising properties of these formulations: rapid onset, prolonged duration, mucoadhesion, biodegradability, and high anesthesia effectiveness. This study demonstrates the potential for advancing local anesthesia across various medical fields, emphasizing the synergy between material science and clinical applications to improve patient care and safety.

Use of autologous tooth-derived material as a graft in the post-extraction socket. Split-mouth study with radiological and histological analysis

BackgroundThe healing process after tooth removal involves bone remodelling which implies some loss of alveolar bone volume. Among materials proposed for minimising this remodelling and preserving the bone, autologous dental tissue is a promising option, but more data are needed. In this context, we evaluated size and density changes using cone beam computed tomography in autologous dental material (ADM)-preserved sockets compared to controls, and assessed biological responses by histological analysis.MethodsA split-mouth study was conducted including 22 patients, who underwent removal of ≥ 2 single-rooted teeth with intact sockets, assigning one socket to the experimental group which received ADM for alveolar preservation and another to the control group, which only underwent blood clot stabilisation. Cone beam computed tomography was performed postoperatively (week 0) and at weeks 8 and 16 to assess socket size and bone density. Histological analysis was carried out on trephine biopsies taken (Ø4 × 4.5 mm) from the experimental group.ResultsLess horizontal shrinkage was observed in the ADM group, especially at week 16 considering the group-by-time interaction for the following variables: difference in height between the lingual and buccal alveolar crests (-1.00; p < .01; 95% CI: -0.28 – -1.73), and half-widths, measured as the distance from the long axis of the missing tooth to the buccal alveolar crest at 1 mm (-0.61; p < .01; 95% CI: -0.18 – -1.04) and at 3 mm (-0.56; p < .01; 95% CI: -0.15 – -0.97) below the crest, with mean decreases of 1.07 and 2.14 mm in height difference, 0.66 and 1.32 mm in half-width at 1 mm and 0.43 and 1.02 mm in half-width at 3 mm in ADM and control groups respectively. Densitometry analysis showed higher bone densities in Hounsfield units in the ADM group considering all factors analysed regardless of time point and socket third (coronal, middle, or apical). Histologically, there were no signs of inflammation or foreign body reaction, and dentin particles were surrounded by and in close contact with bone tissue.ConclusionThese results add to the evidence that dentin can be used successfully as a material for alveolar socket preservation, given its desirable mechanical and biological properties, and warrant larger studies.

Deciphering the fate of granulation tissue in the human inflammatory alveolar microenvironment using single-cell RNA sequencing

Objective: To investigate the cellular composition and heterogeneity of granulation tissue in human alveolar sockets and construct single-cell transcriptomic maps to elucidate the potential outcomes of natural resolution in the inflammatory microenvironment. Methods: Granulation tissues from 12 alveolar sockets undergoing tooth extraction due to periodontitis and scheduled for delayed site preservation or autologous tooth transplantation were collected in the Department of Oral and Maxillofacial Surgery, School of stomatology Fourth Military Medical University from September 2022 to August 2023. This study used HE staining and single-cell RNA sequencing (scRNA-seq) to observe the cellular composition and morphological changes of different types of granulation tissues. This approach enabled us to identify cellular sequence variations in the inflammatory dental alveolar granulation tissue within specific microenvironments, construct single-cell atlases for different types of human dental alveolar granulation tissues, and explore the spatiotemporal patterns of cell type distribution and key gene changes during the resolution process of inflammatory granulation tissue. Results: HE staining revealed extensive infiltration of inflammatory cells in the dental alveolar inflammatory granulation tissue. After allowing the inflammatory granulation tissue to naturally resolve for three weeks, its histological morphology was essentially consistent with that of reparative granulation tissue. ScRNA-seq captured a total of 20 448 cells from granulation tissues, and the gene expression quantification analysis revealed total gene counts of 33 835 for inflammatory granulation tissue, 36 058 for naturally resolved granulation tissue, and 34 719 for reparative granulation tissue. At the single-cell level, granulation tissue was annotated into ten cell subgroups, including vascular endothelial cells, mesenchymal stem cells, and fibroblasts. Differences were observed in the proportion of cell compositions between inflammatory and naturally resolved granulation tissues. Pseudo-temporal analysis illustrated two main outcomes in tissue resolution and healing, involving immune responses and angiogenesis. Among these, genes associated with inflammation regulation and immune response, such as Igbp5, Zfp36, and Hspa1b, as well as genes involved in extracellular matrix secretion and the formation of vessels and fibers such as Timp3, Postn, and Rgs5, showed significant differences in expression between the two types of granulation tissues. Conclusions: Inflammatory granulation tissue exhibits heterogeneity in cell composition, gene expression, and biological functions compared to naturally resolved granulation tissue. When the inflammatory granulation tissue in the alveolar socket is left undisturbed to undergo natural resolution, it displays a cellular composition similar to that of reparative granulation tissue at both the histological and single-cell levels. Moreover, it modulates the inflammatory response and the healing process through immune reactions and tissue remodeling.

Effect of residual dental follicle after removal of impacted mandibular third molar on the periodontal health of adjacent second molar

Objective: To investigate whether residual dental follicles in the alveolar socket after extraction of impacted mandibular third molars affect the periodontal health of adjacent mandibular second molars, in order to provide clinical reference for the management of residual dental follicles after third molar extraction. Methods: A total of 82 patients who underwent bilateral impacted mandibular third molar extraction at the Department of Oral Surgery, School and Hospital of Stomatology Wuhan University, from November 1, 2020, to November 30, 2022, were included in the study. Using a self-controlled method, each patient's bilateral mandibular third molars were randomly divided into two groups: Group A underwent third molar extraction with thorough removal of residual dental follicle tissue, while Group B underwent third molar extraction without any treatment of the remaining dental follicle tissue. Operation time and adverse reactions were recorded. Clinical and radiographic examinations were performed at 6-month follow-up to evaluate the periodontal parameters and alveolar bone height of the bilateral mandibular second molars, and differences between the two groups were compared. Results: All patients had successful bilateral mandibular third molar extractions, and no serious complications occurred intraoperatively or postoperatively. There were no statistically significant differences in surgical time, postoperative pain, or facial swelling between the two groups (P>0.05). At the 6-month follow-up, the probing depth on the distal aspect of the mandibular second molars in Group A [2.67 (2.00, 3.67) mm] was significantly less than that in Group B [4.00 (3.00, 5.00) mm] (Z=-6.55, P<0.001). The clinical attachment loss on the distal aspect of the mandibular second molars in Group A [1.00 (0.00, 3.00) mm] was less than that in Group B [3.00 (2.00, 5.00) mm] (Z=-5.99, P<0.001). The distance from the alveolar crest to the cementoenamel junction on the distal aspect of the mandibular second molars in Group A [(1.86±1.34) mm] was less than that in Group B [(3.04±1.89) mm] (t=6.87,P<0.001). In patients aged≥20 years, the probability of recovery of alveolar bone height to normal level on the distal aspect of the mandibular second molars in Group A [42.3% (11/26)] was significantly higher than that in Group B [0 (0/26)] (P<0.01), while there was no statistically significant difference between Group A [63.3% (19/30)] and Group B [46.7% (14/20)] in patients aged<20 years (P>0.05). Conclusions: Residual dental follicles in the alveolar socket after extraction of impacted mandibular third molars adversely affect the periodontal health of adjacent teeth. Thorough removal of residual dental follicles during impacted mandibular third molar extraction is beneficial for the postoperative recovery of alveolar bone height of the distal aspect of the mandibular second molars, especially in patients aged≥20 years.

Performance of a multiphase bioactive socket plug with a barrier function for alveolar ridge preservation

The natural healing process of extraction socket and traditional socket plug material could not prevent buccal bone wall resorption and down growth of epithelium from the socket orifice. A multiphase bioactive socket plug (BP) is designed to overcome the natural healing process by maintaining the three-dimensional (3D) volume of extraction sockets, particularly in sockets with wall defects, and later provide sufficient alveolar bone volume for implant placement. The study aimed to fabricate and evaluate the physical, chemical, and biological performance of BP in vitro. The BP was fabricated through freeze-drying and layer-by-layer assembly, comprised of a base serving as a scaffold, a central portion for promoting bone regeneration, an upper buccal portion for maintaining alveolar socket dimension with a covering collagen membrane (Memb) on the top and upper buccal surface to prevent soft tissue infiltration. The BP as the experimental group and a pure collagen plug (CP) as the control group were investigated and compared. Radiograph, scanning electron microscopy, and energy-dispersive spectroscopy mapping confirmed that the four-part BP was successfully assembled and fabricated. Swelling rate analysis indicated that BP, CP, and Memb reached swelling equilibrium within 1 hour. BP exhibited a high remaining weight percentage in collagenase solution (68.81 ± 2.21% on day 90) and sustained calcium ion release, reaching the maximum 0.13 ± 0.04 mmol l−1 on day 14. In biological assays, BP exhibited excellent cell proliferation (The OD value increased from 0.02 on day 1 to 0.23 on day 21.). The BP group exhibited higher alkaline phosphatase activity and osteocalcin content than the CP group within 21 days. Memb and BP exhibited outstanding barrier function, as evidenced by Hematoxylin and eosin staining. In summary, the multiphase bioactive socket plug represents a promising scaffold for alveolar ridge preservation application.

Knowledge, attitudes, and practices among patients with combined dentition defect and non-functional impacted teeth toward tooth autotransplantation

BackgroundTooth autotransplantation (TAT) is a surgical procedure involving the extraction of a tooth from one location and its subsequent transplantation into another alveolar socket within the same individual. This innovative treatment approach holds significant promise. Nonetheless, the potential recipients exhibit a limited level of awareness and understanding of this procedure. This study investigated the knowledge, attitudes, and practices (KAP) among patients with combined dentition defects and non-functional impacted teeth toward TAT.MethodsThis web-based cross-sectional study was conducted between December 2022 and February 2023 at one hospital. A self-designed questionnaire was developed to collect demographic information of the patients and assess their knowledge, attitudes, and practices toward TAT.ResultsA total of 533 valid questionnaires were collected. The mean knowledge, attitude, and practice scores were 5.55 ± 2.38 (possible range: 0–10), 26.82 ± 2.46 (possible range, 8–40), and 27.45 ± 7.40 (possible range, 9–45), respectively.ConclusionThe participants had insufficient knowledge, negative attitudes, and passive practices toward TAT. Targeted interventions should be implemented to improve the understanding and practice of TAT among patients with dentition defects.

Effect of Dental Implant System-Assisted Tooth Intentional Replantation in the Treatment of Anterior Teeth with Pathological Tooth Flaring, Drifting and Elongation in Patients with Stage III/IV Periodontitis: a Case Series.

To investigate the clinical effect of implant-assisted dental intentional replantation (IR) for the treatment of "drifted" anterior periodontally hopeless teeth (PHT). The present authors recruited 22 patients with stage III/IV periodontitis who suffered drifting of the maxillary anterior teeth, with a total of 25 teeth. The PHT were extracted for in vitro root canal treatment (RCT). The root surface was smoothed and the shape was trimmed, and the alveolar socket was scratched. The dental implant system was used to prepare the alveolar socket according to the direction, depth and shape of the tooth implantation. The PHT were reimplanted into the prepared alveolar socket. The periodontal indicators were analysed statistically before and after surgery. Twenty-two patients who completed the full course of treatment, with a total of 25 PHT, had a successful retention rate of 88%. Mean periodontal probing depth (PPD) decreased by 2.880 ± 0.556 mm and 3.390 ± 0.634 mm at 6 months and 1 year, respectively, and clinical attachment loss (CAL) decreased by 2.600 ± 0.622 mm and 2.959 ± 0.731 mm at the same time points, respectively, showing significant improvement (P < 0.05). Dental implant system-assisted IR can effectively preserve "drifted" natural PHT in patients with stage III/IV periodontitis.