Dental Plaque Microcosm Biofilm Research Articles

Effects of photodynamic therapy on Streptococcus mutans and enamel remineralization of multifunctional TiO2-HAP composite nanomaterials

BackgroundAs photosensitizer and photocatalyst, titanium dioxide (TiO2) can produce a photodynamic reaction for antibacterial treatment. This study aims to explore a Titanium dioxide/nano-hydroxyapatite (TiO2-HAP) composite combined with the dental curing lamp (385–515 nm) in clinical which could inhibit the dental plaque biofilm formed by Streptococcus mutans (S. mutans) and promote the enamel surface remineralization simultaneously. MethodsX-ray Diffraction (XRD) and high resolution transmission electron microscope (HRTEM) were used to detect the characterization of TiO2-HAP composite nanomaterials. Photodynamic properties of TiO2-HAP were detected by Diffuse reflectance spectrum (DRS) and fluorescence spectroscopy. Bacterial growth was measured by reading the absorbance of bacterial cultures and confocal microscope was used to observe the biofilm removal ability of nanomaterials. The ability of TiO2-HAP to promote enamel remineralization was measured by Scanning electron microscope (SEM). ResultsThe OD 600 of S. mutans was 0.76 in the control group and 0.13 in group of TiO2-HAP with exposure to light-emitting diode (LED) (150 mW/cm2) for 5 min, suggesting its sustained antibacterial potency and inhibition of the metabolic activity of dental plaque microcosm biofilm. Also, the release of calcium and phosphorus ions in TiO2-HAP can promote enamel mineralization simultaneously. After 15 days of remineralization, the Ca/P ratio of demineralized enamel surface increased from 1.28 to 1.67, which was similar to that of normal enamel. ConclusionsThe TiO2-HAP exhibit a promising anti-bacterial activity and remineralization capacity which can prevent the occurrence of caries to the greatest extent and promote the biomimetic mineralization of dental tissues.

Development of novel self-adhesive resin cement with antibacterial and self-healing properties

This study aimed to develop novel self-adhesive resin cement with antibacterial and self-healing properties. Furthermore, the dentin bonding strength, mechanical properties, self-healing efficiency, and antibacterial property of the developed cement were measured. Novel nano-antibacterial inorganic fillers that contain quaternary ammonium salts with long-chain alkyls were synthesized. These fillers were added into self-adhesive resin cement containing self-healing microcapsules at mass fractions of 0, 2.5%, 5.0%, 7.5%, or 10.0%. The dentin shear bonding test was used to test the bonding strength, whereas the flexural test was used to measure the flexural strength and elastic modulus of the cement. The single-edge V-notched beam method was used to measure self-healing efficiency, and human dental plaque microcosm biofilms were chosen to calculate the antibacterial property. The dentin shear bond strength significantly decreased when the mass fraction of the nano-antibacterial inorganic fillers in the novel cement reached 7.5% (P<0.05). The incorporation of 0, 2.5%, 5.0%, 7.5%, or 10.0% mass fraction of nano-antibacterial inorganic fillers did not adversely affect the flexural strength, elastic modulus, fracture toughness, and self-healing efficiency of the cement (P>0.1). Resin cement containing 2.5% mass fraction or more nano-antibacterial inorganic fillers significantly inhibited the metabolic activity of dental plaque microcosm biofilms, indicating strong antibacterial potency (P<0.05). The novel self-adhesive resin cement exhibited promising antibacterial and self-healing properties, which enable the cement to be used for dental applications.

Self-healing adhesive with antibacterial activity in water-aging for 12 months

ObjectiveSecondary caries and micro-cracks are the main limiting factors for dentin bond durability. The objectives of this study were to develop a self-healing adhesive containing dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP), and investigate the effects of water-aging for 12 months on self-healing, dentin bonding, and antibacterial properties for the first time. MethodsMicrocapsules were synthesized with poly (urea-formaldehyde) (PUF) shells containing triethylene glycol dimethacrylate (TEGDMA) and N,N-dihydroxyethyl-p-toluidine (DHEPT). The adhesive contained 7.5% microcapsules, 10% DMAHDM, and 20% NACP (all mass). Specimens were water-aged at 37 °C for 1 day to 12 months. Dentin bond strength was measured using extracted human teeth. A single-edge-V-notched-beam (SEVNB) method was used to measure fracture toughness KIC and self-healing efficiency. A dental plaque microcosm biofilm model was used with human saliva as inoculum. ResultsThe microcapsules + DMAHDM + NACP group showed no decline in dentin bond strength after water-aging for 12 months, which was significantly higher than that of other groups without DMAHDM (p < 0.05). A self-healing efficiency of 67% recovery in KIC was obtained even after 12 months of water immersion, indicating that the self-healing ability was not lost in water-aging (p > 0.1). The bacteria-killing ability of this adhesive did not decline from 1 day to 12 months (p > 0.1), with biofilm CFU reduction by 3–4 orders of magnitude after the resin was water-aged for 12 months, compared to control resin. SignificanceThis novel adhesive with triple merits of self-healing, antibacterial and remineralization functions showed an excellent long-term durability in water-aging for 12 months. This multifunctional adhesive has the potential for dental applications to heal cracks, inhibit bacteria, provide ions for remineralization, and increase the restoration longevity.

Effect of water immersion on a dental self-healing and antibacterial resin composite

This investigation aimed to develop a novel self-healing and antibacterial dental resin composite. The effects of water immersion on its properties were also evaluated. Microcapsules filled with healing agent of triethylene glycol dimethacrylate were synthesized on the basis of previous studies. Antibacterial resin composite contained nano-antibacterial inorganic fillers that were modified by quaternary ammonium salt with long-chain alkyl. Microcapsules were incorporated into antibacterial resin composite at mass fraction of 7.5%. A commercial resin composite named Tetric N-Ceram was used as control. The resin samples were immersed in 37 °C distilled water for different periods. A flexural test was used to measure the mechanical properties of the novel resin composite. A single-edge V-notched beam method was used to measure fracture toughness and self-healing efficiency. A dental plaque microcosm biofilm model with human saliva as inoculum was formed. Colony-forming units (CFU) and lactic acid production of biofilm on the novel resin composite were calculated to test the antibacterial property. Mechanical properties and fracture toughness decreased significantly after the composite was immersed in water for 30 days (P<0.05), and no significant reduction was found from then on (P>0.05). Water immersion did not weaken the self-healing capability of the composite (P>0.05), and self-healing efficiency of 64% could still be obtained even after 270 days. The antibacterial resin composite showed a strong inhibition effect on the biofilm metabolic activity versus water immersion time from 1 day to 270 days. Therefore, the composite could still have a promising antibacterial property even after being immersed in water (P<0.05). Water immersion could weaken the mechanical properties of the novel self-healing and antibacterial resin composite, but it insignificantly affected the self-healing and antibacterial properties of the composite.

Effects of water-aging for 6 months on the durability of a novel antimicrobial and protein-repellent dental bonding agent

Biofilms at the tooth-restoration bonded interface can produce acids and cause recurrent caries. Recurrent caries is a primary reason for restoration failures. The objectives of this study were to synthesize a novel bioactive dental bonding agent containing dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC) to inhibit biofilm formation at the tooth-restoration margin and to investigate the effects of water-aging for 6 months on the dentin bond strength and protein-repellent and antibacterial durability. A protein-repellent agent (MPC) and antibacterial agent (DMAHDM) were added to a Scotchbond multi-purpose (SBMP) primer and adhesive. Specimens were stored in water at 37 °C for 1, 30, 90, or 180 days (d). At the end of each time period, the dentin bond strength and protein-repellent and antibacterial properties were evaluated. Protein attachment onto resin specimens was measured by the micro-bicinchoninic acid approach. A dental plaque microcosm biofilm model was used to test the biofilm response. The SBMP + MPC + DMAHDM group showed no decline in dentin bond strength after water-aging for 6 months, which was significantly higher than that of the control (P < 0.05). The SBMP + MPC + DMAHDM group had protein adhesion that was only 1/20 of that of the SBMP control (P < 0.05). Incorporation of MPC and DMAHDM into SBMP provided a synergistic effect on biofilm reduction. The antibacterial effect and resistance to protein adsorption exhibited no decrease from 1 to 180 d (P > 0.1). In conclusion, a bonding agent with MPC and DMAHDM achieved a durable dentin bond strength and long-term resistance to proteins and oral bacteria. The novel dental bonding agent is promising for applications in preventive and restorative dentistry to reduce biofilm formation at the tooth-restoration margin.

Novel rechargeable calcium phosphate nanocomposite with antibacterial activity to suppress biofilm acids and dental caries

ObjectiveRechargeable calcium phosphate (CaP) composites were developed recently. However, none of the rechargeable CaP composites was antibacterial. The objectives of this study were to develop the first rechargeable CaP composite that was antibacterial, and to investigate the effects of adding dimethylaminohexadecyl methacrylate (DMAHDM) into rechargeable CaP composite on ion rechargeability and re-release as well as biofilm properties. MethodsDMAHDM was synthesized via a Menschutkin reaction. Nanoparticles of amorphous calcium phosphate (NACP) were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Two composites were fabricated: rechargeable NACP composite, and rechargeable NACP-DMAHDM composite. Mechanical properties and ion release and recharge were measured. A dental plaque microcosm biofilm model using saliva was tested. ResultsFlexural strength and elastic modulus of rechargeable NACP and NACP-DMAHDM composites matched commercial control composite (p > 0.1). NACP-DMAHDM inhibited biofilm metabolic activity and lactic acid, and reduced biofilm colony-forming units (CFU) by 3–4 log. NACP and NACP-DMAHDM showed similar Ca and P ion recharge and re-release (p > 0.1). Therefore, adding DMAHDM did not compromise the ion rechargeability. One recharge yielded continuous release for 42 d. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release and remineralization capability. ConclusionsThe first CaP rechargeable and antibacterial composite was developed. Adding DMAHDM into the rechargeable NACP composite did not adversely affect the Ca and P ion release and recharge, and the composite had much less biofilm growth and lactic acid production, with CFU reduction by 3–4 log. Clinical significanceThis novel CaP rechargeable composite with long-term remineralization and antibacterial properties is promising for tooth restorations to inhibit caries.

Antibacterial dental adhesive containing nanoantibacterial inorganic fillers

This investigation aimed to develop a novel antibacterial dental adhesive containing nanoantibacterial inorganic fillers and measure the dentin bonding strength, mechanical properties, and antibacterial property of the novel adhesive in vitro. Novel nanoantibacterial inorganic fillers containing quaternary ammonium salt with long chain alkyl were synthesized on the basis of previous research. These novel nanoantibacterial inorganic fillers were added into the dental adhesive to prepare novel nanoantibacterial dental resin composite at mass fractions of 0%, 2.5%, 5.0%, 7.5%, and 10%; 0% was used as control. Dentin shear bonding test was used to evaluate the bonding strength. Flexural test was utilized to measure the novel resin composite flexural strength and elastic modulus. A dental plaque microcosm biofilm model with human saliva as inoculum was formed. Colony forming unit, lactic acid production, and live/dead assay of the biofilm on novel dental adhesive were calculated to assess the effect of novel dental adhesive on human dental plaque microcosm biofilm. The dentin shear bond strength, flexural strength, and elastic modulus were 28.9 MPa, 86.6 MPa, and 4.2 GPa, respectively, when the nanoantibacterial inorganic filler mass fraction in the dental adhesive reached approximately 5.0%. Consequently, the dentin shear bond strength and mechanical properties significantly increased. Addition of 2.5% nanoantibacterial inorganic fillers into the dental adhesive exerted no adverse effect on the mechanical properties significantly (P>0.05). Dental adhesive containing 5% or more nanoantibacterial inorganic fillers inhibited the metabolic activity of the dental plaque microcosm biofilm significantly, thereby displaying a strong antibacterial potency (P<0.05). This novel antibacterial dental adhesive, which contained 5.0% nanoantibacterial inorganic filler, exhibited promising bonding strength, mechanical property, and antibacterial ability. Hence, this adhesive can be potentially used in caries inhibition in dental application.

Novel multifunctional dental cement to prevent enamel demineralization near orthodontic brackets

ObjectivesWhite spot lesions due to biofilm acid-induced enamel demineralization are prevalent in orthodontic treatments. The aim of this study was to develop a novel bioactive multifunctional cement with protein-repellent, antibacterial and remineralizing capabilities, and investigate the effects on enamel hardness and lesion depth in vitro for the first time. Materials and methods2-Methacryloyloxyethyl phosphorylcholine (MPC), dimethylaminohexadecyl methacrylate (DMAHDM), and nanoparticles of amorphous calcium phosphate (NACP) were incorporated into a resin-modified glass ionomer (RMGI). Extracted human premolars had brackets bonded via four groups: (1) Transbond XT (TB), (2) RMGI (GC Ortho LC), (3) RMGI+MPC+DMAHDM, (4) RMGI+MPC+DMAHDM+NACP. Demineralization was induced via a dental plaque microcosm biofilm model. Samples were tested using polarized light microscopy (PLM) for lesion depth. Enamel hardness was tested for different groups. ResultsIncorporating MPC, DMAHDM and NACP did not affect enamel bond strength. “RMGI+MPC+DMAHDM+NACP” group had the least lesion depth in enamel (p<0.05). Groups with NACP had the highest enamel hardness (p<0.05). Mineral loss (ΔS) in enamel for NACP group was about one third that for RMGI control. “RMGI+MPC+DMAHDM” had greater effect on demineralization-inhibition, compared to RMGI and TB controls. “RMGI+MPC+DMAHDM+NACP” was more effective in protecting enamel prisms from dissolution by biofilm acids, compared to RMGI and TB control groups. ConclusionThe Novel “RMGI+MPC+DMAHDM+NACP” cement substantially reduced enamel demineralization adjacent to orthodontic brackets, yielding much less lesion depth and greater enamel hardness under biofilm acid attacks than commercial controls. The clinical significance is that the novel multi-agent (RMGI+MPC+DMAHDM+NACP) method is promising for a wide range of preventive and restorative applications to combat caries.

Novel orthodontic cement containing dimethylaminohexadecyl methacrylate with strong antibacterial capability.

Orthodontic treatments increase the incidence of white spot lesions. The objectives of this study were to develop an antibacterial orthodontic cement to inhibit demineralization, and to evaluate its enamel shear bond strength and anti-biofilm properties. Novel antibacterial monomer dimethylaminohexadecyl methacrylate (DMAHDM) was synthesized and incorporated into Transbond XT at 0, 1.5 and 3% by mass. Anti-biofilm activity was assessed using a human dental plaque microcosm biofilm model. Shear bond strength and adhesive remnant index were also tested. Biofilm activity precipitously dropped when contacting orthodontic cement with DMAHDM. Orthodontic cement containing 3% DMAHDM significantly reduced biofilm metabolic activity and lactic acid production (p<0.05), and decreased biofilm colony-forming unit (CFU) by two log. Water-aging for 90 days had no adverse influence on enamel shear bond strength (p>0.1). By incorporating DMAHDM into Transbond XT for the first time, the modified orthodontic cement obtained a strong antibacterial capability without compromising the enamel bond strength.

Do Dental Resin Composites Accumulate More Oral Biofilms and Plaque than Amalgam and Glass Ionomer Materials?

A long-time drawback of dental composites is that they accumulate more biofilms and plaques than amalgam and glass ionomer restorative materials. It would be highly desirable to develop a new composite with reduced biofilm growth, while avoiding the non-esthetics of amalgam and low strength of glass ionomer. The objectives of this study were to: (1) develop a protein-repellent composite with reduced biofilms matching amalgam and glass ionomer for the first time; and (2) investigate their protein adsorption, biofilms, and mechanical properties. Five materials were tested: A new composite containing 3% of protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC); the composite with 0% MPC as control; commercial composite control; dental amalgam; resin-modified glass ionomer (RMGI). A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate metabolic activity, colony-forming units (CFU), and lactic acid production. Composite with 3% MPC had flexural strength similar to those with 0% MPC and commercial composite control (p > 0.1), and much greater than RMGI (p < 0.05). Composite with 3% MPC had protein adsorption that was only 1/10 that of control composites (p < 0.05). Composite with 3% MPC had biofilm CFU and lactic acid much lower than control composites (p < 0.05). Biofilm growth, metabolic activity and lactic acid on the new composite with 3% MPC were reduced to the low level of amalgam and RMGI (p > 0.1). In conclusion, a new protein-repellent dental resin composite reduced oral biofilm growth and acid production to the low levels of non-esthetic amalgam and RMGI for the first time. The long-held conclusion that dental composites accumulate more biofilms than amalgam and glass ionomer is no longer true. The novel composite is promising to finally overcome the major biofilm-accumulation drawback of dental composites in order to reduce biofilm acids and secondary caries.

Protein-repellent and antibacterial properties of modified orthodontic adhesive

To develop a novel protein-repellent orthodontic adhesive by incorporating 2-methacryloyloxyethyl phosphorylcholine(MPC). MPC was incorporated into a commercially available orthodontic adhesive(Fuji ORTHO) at 0% (control), 1.5%, 3.0%, and 5.0% by mass. Enamel shear bond strength(SBS) was determined. Protein adsorption onto specimens was determined by a micro bicinchoninic acid method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm viability. The SBS was not reduced in the group(3.0% MPC), compared to the control group. The amount of protein adsorption in the group(3.0% MPC) was (0.46±0.06) μg/cm(2) and (4.57 ± 0.42) μg/cm(2) in the control group. Lactic acid production of biofilms in the group(3.0% MPC) was (7.12±1.03) mmol/L and (12.16±1.24) mmol/L in the control group. MPC based orthodontic adhesive greatly reduced the protein adsorption and bacterial adhesion, without compromising enamel shear bond strength.

Novel Dental Cement to Combat Biofilms and Reduce Acids for Orthodontic Applications to Avoid Enamel Demineralization.

Orthodontic treatments often lead to biofilm buildup and white spot lesions due to enamel demineralization. The objectives of this study were to develop a novel bioactive orthodontic cement to prevent white spot lesions, and to determine the effects of cement compositions on biofilm growth and acid production. 2-methacryloyloxyethyl phosphorylcholine (MPC), nanoparticles of silver (NAg), and dimethylaminohexadecyl methacrylate (DMAHDM) were incorporated into a resin-modified glass ionomer cement (RMGI). Enamel shear bond strength (SBS) was determined. Protein adsorption was determined using a micro bicinchoninic acid method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate metabolic activity, colony-forming units (CFU) and lactic acid production. Incorporating 3% of MPC, 1.5% of DMAHDM, and 0.1% of NAg into RMGI, and immersing in distilled water at 37 °C for 30 days, did not decrease the SBS, compared to control (p > 0.1). RMGI with 3% MPC + 1.5% DMAHDM + 0.1% NAg had protein amount that was 1/10 that of control. RMGI with triple agents (MPC + DMAHDM + NAg) had much stronger antibacterial property than using a single agent or double agents (p < 0.05). Biofilm CFU on RMGI with triple agents was reduced by more than 3 orders of magnitude, compared to commercial control. Biofilm metabolic activity and acid production were also greatly reduced. In conclusion, adding MPC + DMAHDM + NAg in RMGI substantially inhibited biofilm viability and acid production, without compromising the orthodontic bracket bond strength to enamel. The novel bioactive cement is promising for orthodontic applications to hinder biofilms and plaque buildup and enamel demineralization.

Orthodontic cement with protein-repellent and antibacterial properties and the release of calcium and phosphate ions

ObjectivesWhite spot lesions often occur in orthodontic treatments. The objective of this study was to develop a novel resin-modified glass ionomer cement (RMGI) as an orthodontic cement with protein-repellent, antibacterial and remineralization capabilities. MethodsProtein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC), antibacterial dimethylaminohexadecyl methacrylate (DMAHDM), nanoparticles of silver (NAg), and nanoparticles of amorphous calcium phosphate (NACP) were incorporated into a RMGI. Enamel shear bond strength (SBS) was determined. Calcium (Ca) and phosphate (P) ion releases were measured. Protein adsorption onto specimens was determined by a micro bicinchoninic acid method. A dental plaque microcosm biofilm model was tested. ResultsIncreasing the NACP filler level increased the Ca and P ion release. Decreasing the solution pH increased the ion release. Incorporating MPC into RMGI reduced protein adsorption, which was an order of magnitude less than that of commercial controls. Adding DMAHDM and NAg into RMGI yielded a strong antibacterial function, greatly reducing biofilm viability and acid production. Biofilm CFU counts on the multifunctional orthodontic cement were 3 orders of magnitude less than that of commercial control (p<0.05). These benefits were achieved without compromising the enamel shear bond strength (p>0.1). ConclusionsA novel multifunctional orthodontic cement was developed with strong antibacterial and protein-repellent capabilities for preventing enamel demineralization. Clinical significanceThe new cement is promising to prevent white spot lesions in orthodontic treatments. The method of incorporating four bioactive agents may have wide applicability to the development of other bioactive dental materials to inhibit caries.

Effect of 2-methacryloyloxyethyl phosphorylcholine on the protein-repellent property of dental adhesive

To evaluate the effect of 2-methacryloyloxyethyl phosphorylcholine (MPC) and nanoparticles of amorphous calcium phosphate (NACP) on the protein-repellent property of dental adhesive. MPC and NACP were incorporated into SBMP as the test group. Scotchbond Multi-Purpose (SBMP) was used as control group. Human dentin shear bond strengths were measured. Protein adsorption onto samples was determined by micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm viability. The dentin bond strength of modified group was (28.7±2.2) MPa, which was not significantly different from that of the SBMP control group. The amount of protein adsorption in the modified group and the SBMP control group were (0.21±0.02) µg/cm(2) and (4.17±0.45) µg/cm(2) respectively. Lactic acid production of biofilms in modified group and SBMP control were (7.71 ± 1.01) mmol/L and (19.18 ± 2.34) mmol/L repectively. MPC-NACP based dental adhesive greatly reduce the protein adsorption and bacterial adhesion, without compromising dentin shear bond strength. This novel bonding agent may have wide application.

Dental plaque microcosm biofilm behavior on a resin composite incorporated with nano-antibacterial inorganic filler containing long-chain alkyl quaternary ammonium salt

To develop a resin composite incorporated with nano-antibacterial inorganic filler containing long-chain alkyl quaternary ammonium salt, and to measure its effect on human dental plaque microcosm biofilm. A novel nano-antibacterial inorganic filler containing long-chain alkyl quaternary ammonium salt was synthesized according to methods introduced in previous research. Samples of the novel nano-antibacterial inorganic fillers were modified by a coupling agent and then added into resin composite at 0%, 5%, 10%, 15% or 20% mass fractions; 0% composite was used as control. A flexural test was used to measure resin composite mechanical properties. Results showed that a dental plaque microcosm biofilm model with human saliva as inoculum was formed. Colony-forming unit (CFU) counts, lactic acid production, and live/dead assay of biofilm on the resin composite were calculated to test the effect of the resin composite on human dental plaque microcosm biofilm. The incorporation of nano-antibacterial inorganic fillers with as much as 15% concentration into the resin composite showed no adverse effect on the mechanical properties of the resin composite (P > 0.05). Resin composite containing 5% or more nano-antibacterial inorganic fillers significantly inhibited the metabolic activity of dental plaque microcosm biofilm, suggesting its strong antibacterial potency (P < 0.05). This novel resin composite exhibited a strong antibacterial property upon the addition of up to 5% nano-antibacterial inorganic fillers, thereby leading to effective caries inhibition in dental application.

Effects of quaternary ammonium chain length on the antibacterial and remineralizing effects of a calcium phosphate nanocomposite.

Composites containing nanoparticles of amorphous calcium phosphate (NACP) remineralize tooth lesions and inhibit caries. A recent study synthesized quaternary ammonium methacrylates (QAMs) with chain lengths (CLs) of 3–18 and determined their effects on a bonding agent. This study aimed to incorporate these QAMs into NACP nanocomposites for the first time to simultaneously endow the material with antibacterial and remineralizing capabilities and to investigate the effects of the CL on the mechanical and biofilm properties. Five QAMs were synthesized: DMAPM (CL3), DMAHM (CL6), DMADDM (CL12), DMAHDM (CL16), and DMAODM (CL18). Each QAM was incorporated into a composite containing 20% NACP and 50% glass fillers. A dental plaque microcosm biofilm model was used to evaluate the antibacterial activity. The flexural strength and elastic modulus of nanocomposites with QAMs matched those of a commercial control composite (n = 6; P > 0.1). Increasing the CL from 3 to 16 greatly enhanced the antibacterial activity of the NACP nanocomposite (P < 0.05); further increasing the CL to 18 decreased the antibacterial potency. The NACP nanocomposite with a CL of 16 exhibited biofilm metabolic activity and acid production that were 10-fold lesser than those of the control composite. The NACP nanocomposite with a CL of 16 produced 2-log decreases in the colony-forming units (CFU) of total microorganisms, total streptococci, and mutans streptococci. In conclusion, QAMs with CLs of 3–18 were synthesized and incorporated into an NACP nanocomposite for the first time to simultaneously endow the material with antibacterial and remineralization capabilities. Increasing the CL reduced the metabolic activity and acid production of biofilms and caused a 2-log decrease in CFU without compromising the mechanical properties. Nanocomposites exhibiting strong anti-biofilm activity, remineralization effects, and mechanical properties are promising materials for tooth restorations that inhibit caries.

Antibacterial and protein-repellent orthodontic cement to combat biofilms and white spot lesions

ObjectivesWhite spot lesions are the most undesired side-effect of fixed orthodontic treatments. The objectives of this study were to combine nanoparticles of silver (NAg) with 2-methacryloyloxyethyl phosphorylcholine (MPC) to develop a modified resin-modified glass ionomer cement (RMGI) as orthodontic cement with double benefits of antibacterial and protein-repellent capabilities for the first time. MethodsNAg and MPC were incorporated into a commercial RMGI. Another commercial orthodontic adhesive also served as control. Enamel shear bond strengths (SBS) were determined. Protein adsorption was measured via a micro bicinchoninic acid method. A dental plaque microcosm biofilm model with human saliva as inoculum was tested. Biofilms adherent on the cement samples and planktonic bacteria in the culture medium away from the cement surfaces were both evaluated for bacterial metabolic activity, colony-forming units (CFU), and lactic acid production. ResultsAdding 0.1% NAg and 3% MPC to RMGI, and water-aging for 30 days, did not adversely affect the SBS, compared to the unmodified RMGI control (p>0.1). The modified RMGI containing 0.1% NAg and 3% MPC achieved the greatest reduction in protein adsorption, bacterial adhesion, CFU, metabolic activity and lactic acid production. The RMGI containing 0.1% NAg and 3% MPC inhibited not only the bacteria on its surface, but also the bacteria away from the surface in the culture medium. ConclusionsThe incorporation of double agents (antibacterial NAg+protein-repellent MPC) into RMGI achieved much stronger inhibition of biofilms than using each agent alone. The novel antibacterial and protein-repellent RMGI with substantially-reduced biofilm acids is promising as an orthodontic cement to combat white spot lesions in enamel.

Effect of dimethylaminohexadecyl methacrylate mass fraction on fracture toughness and antibacterial properties of CaP nanocomposite

ObjectivesBiofilm acids contribute to secondary caries which is a reason for restoration failure. Previous studies synthesized nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM). The objectives of this study were to develop DMAHMD-NACP nanocomposite for double benefits of antibacterial and remineralization capabilities, and investigate the DMAHMD mass fraction effects on fracture toughness and biofilm response of NACP nanocomposite for the first time. MethodsDMAHDM was incorporated into NACP nanocomposite at mass fractions of 0% (control), 0.75%, 1.5%, 2.25% and 3%. A single edge V-notched beam method was used to measure fracture toughness KIC. A dental plaque microcosm biofilm model using human saliva as inoculum was used to measure the antibacterial properties of composites. ResultsKIC was about 1MPa×m1/2 for all composite (mean±sd; n=6). Adding DMAHDM from 0% to 3% did not affect KIC (p>0.1). Lactic acid production by biofilms on composite containing 3% DMAHDM was reduced to less than 1% of that on composite control. Metabolic activity of adherent biofilms on composite containing 3% DMAHDM was reduced to 4% of that on composite control. Biofilm colony-forming unit (CFU) counts were reduced by three orders of magnitude on NACP nanocomposite containing 3% DMAHDM. ConclusionsDMAHDM-NACP nanocomposite had good fracture resistance, strong antibacterial potency, and NACP for remineralization (shown in previous studies). The DMAHDM-NACP nanocomposite may be promising for caries-inhibiting dental restorations, and the method of using double agents (DMAHDM and NACP) may have a wide applicability to other dental materials including bonding agents and cements.

Development of a multifunctional adhesive system for prevention of root caries and secondary caries

ObjectivesThe objectives of this study were to: (1) develop a novel adhesive for prevention of tooth root caries and secondary caries by possessing a combination of protein-repellent, antibacterial, and remineralization capabilities for the first time; and (2) investigate the effects of 2-methacryloyloxyethyl phosphorylcholine (MPC), dimethylaminohexadecyl methacrylate (DMAHDM), and nanoparticles of amorphous calcium phosphate (NACP) on dentin bond strength, protein-repellent properties, and dental plaque microcosm biofilm response. MethodsMPC, DMAHDM and NACP were added into Scotchbond Multi-Purpose primer and adhesive. Dentin shear bond strengths were measured. Adhesive coating thickness, surface texture and dentin–adhesive interfacial structure were examined. Protein adsorption onto adhesive resin surface was determined by the micro bicinchoninic acid method. A human saliva microcosm biofilm model was used to investigate biofilm metabolic activity, colony-forming unit (CFU) counts, and lactic acid production. ResultsThe resin with 7.5% MPC+5% DMAHDM+30% NACP did not adversely affect dentin shear bond strength (p>0.1). The resin with 7.5% MPC+5% DMAHDM+30% NACP produced a coating on root dentin with a thickness of approximately 70μm and completely sealed all the dentinal tubules. The resin with 7.5% MPC+5% DMAHDM+30% NACP had 95% reduction in protein adsorption, compared to SBMP control (p<0.05). The resin with 7.5% MPC+5% DMAHDM+30% NACP was strongly antibacterial, with biofilm CFU being four orders of magnitude lower than that of SBMP control.Significance The novel multifunctional adhesive with strong protein-repellent, antibacterial and remineralization properties is promising to coat tooth roots to prevent root caries and secondary caries. The combined use of MPC, DMAHDM and NACP may have wide applicability to bonding agents, cements, sealants and composites to inhibit caries.

Development of novel dental adhesive with double benefits of protein-repellent and antibacterial capabilities

ObjectivesSecondary caries at the tooth-restoration margins remains a main reason for restoration failure. The objectives of this study were to: (1) combine protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) with quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM) to develop a new dental adhesive with double benefits of protein-repellent and antibacterial capabilities for the first time; and (2) investigate the effects on protein adsorption, anti-biofilm activity, and dentin bond strength. MethodsMPC and DMAHDM were incorporated into Scotchbond Multi-Purpose (SBMP) primer and adhesive. Dentin shear bond strengths were measured using extracted human molars. Protein adsorption onto the adhesive resin surfaces was determined by the micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm metabolic activity, colony-forming unit (CFU) counts, lactic acid production and live/dead staining of biofilms on resins. ResultsIncorporation of 7.5% MPC and 5% DMAHDM into primer and adhesive did not adversely affect the dentin shear bond strength (p>0.1). The resin with 7.5% MPC+5% DMAHDM had protein adsorption that was nearly 20-fold less than SBMP control (p<0.05). The resin with 7.5% MPC+5% DMAHDM had much stronger antibacterial effects than using MPC or DMAHDM alone (p<0.05). Biofilm CFU counts on the resin with 7.5% MPC+5% DMAHDM were reduced by more than 4 orders of magnitude, compared to SBMP control. SignificanceThe use of double agents (protein-repellent MPC+antibacterial DMAHDM) in dental adhesive achieved much stronger inhibition of biofilms than using each agent alone. The novel protein-repellent and antibacterial bonding agent is promising to reduce biofilm/plaque buildup and reduce recurrent caries at the tooth-restoration margins.