Disk Density Research Articles

Broadband X-ray spectral and timing properties of the accreting millisecond X-ray pulsar IGR J17498−2921 during the 2023 outburst

We report on the broadband spectral and timing properties of the accreting millisecond X-ray pulsar IGR J17498−2921 during its April 2023 outburst. We used data from NICER (1–10 keV), NuSTAR (3–79 keV), Insight-HXMT (2–150 keV), and INTEGRAL (30–150 keV). We detected significant 401 Hz pulsations across the 0.5–150 keV band. The pulse fraction increases from ∼2% at 1 keV to ∼13% at 66 keV. We detected five type-I X-ray bursts, including three photospheric radius expansion bursts, with a rise time of ∼2 s and an exponential decay time of ∼5 s. The recurrence time is ∼9.1 h, which can be explained by unstable thermonuclear burning of hydrogen-deficient material on the neutron star surface. The quasi-simultaneous 1–150 keV broadband spectra from NICER, NuSTAR and INTEGRAL can be aptly fitted by an absorbed reflection model, relxillCp, and a Gaussian line of instrumental origin. The Comptonized emission from the hot corona is characterized by a photon index Γ of ∼1.8 and an electron temperature kTe of ∼40 keV. We obtained a low inclination angle i ∼ 34°. The accretion disk shows properties of strong ionization, log(ξ/erg cm s−1)∼4.5, over-solar abundance, AFe ∼ 7.7, and high density, log(ne/cm−3)∼19.5. However, a lower disk density with normal abundance and ionization could also be possible. Based on the inner disk radius of Rin = 1.67RISCO and the long-term spin-down rate of −3.1(2)×10−15 Hz s−1, we were able to constrain the magnetic field of IGR J17498−2921 to the range of (0.9 − 2.4)×108 G.

Rodent competition and fire alter patterns of mound and disk formation of western harvester ants.

Consumers exert top-down controls on dryland ecosystem function, but recent increases in fire activity may alter consumer communities in post-fire environments. Native consumers, including ants and rodents, likely have critical roles in defining post-fire plant community assembly and resilience to biological invasions. This study aimed to understand how western harvester ants (Pogonomyrmex occidentalis) that form mounds and large vegetation-free disks that significantly influence plant community structure in the Great Basin Desert respond to fire and rodent community abundance. We tested this by installing treatment plots that excluded or allowed rodents and were burned or unburned in a full factorial design. We measured ant disk and mound size and density in each experimental plot. Fire increased ant mound density by 126% compared to unburned plots. Rodent presence decreased mound density by 59%, mound diameter by 13%, and mound height by 166%. We also show an interaction where the adverse effects of rodents on ant disk density were greater in burned than in unburned plots. The results suggest that booms in rodent populations are likely to have suppressive effects on ant mound and disk formation in native shrublands but that harvester ants may be released from rodent competition with the emergence of invasive grass-fire cycles.

Anchoring Cs+ Ions on Carbon Vacancies for Selective CO2 Electroreduction to CO at High Current Densities in Membrane Electrode Assembly Electrolyzers

AbstractElectrolyte cations have been demonstrated to effectively enhance the rate and selectivity of the electrochemical CO2 reduction reaction (CO2RR), yet their implementation in electrolyte‐free membrane electrode assembly (MEA) electrolyzer presents significant challenges. Herein, an anchored cation strategy that immobilizes Cs+ on carbon vacancies was designed and innovatively implemented in MEA electrolyzer, enabling highly efficient CO2 electroreduction over commercial silver catalyst. Our approach achieves a CO partial current density of approximately 500 mA cm−2 in the MEA electrolyzer, three‐fold enhancement compared to pure Ag. In situ Raman and theoretical analyses, combined with machine learning potentials, reveal anchored Cs induces an electric field that significantly promotes the adsorption of *CO2− intermediates through performing muti‐point energy calculations on each structure. Furthermore, reduced adsorption of *OH intermediates effectively hampers competing hydrogen evolution reaction, as clarified by disk electrode experiments and density functional theory studies. Additionally, coupling our system with commercial polysilicon solar cells yields a notable solar‐to‐CO energy conversion efficiency of 8.3 %. This study opens a new avenue for developing effective cation‐promoting strategy in MEA reactors for efficient CO2RR.

Anchoring Cs+ Ions on Carbon Vacancies for Selective CO2 Electroreduction to CO at High Current Densities in Membrane Electrode Assembly Electrolyzers.

Electrolyte cations have been demonstrated to effectively enhance the rate and selectivity of the electrochemical CO2 reduction reaction (CO2RR), yet their implementation in electrolyte-free membrane electrode assembly (MEA) electrolyzer presents significant challenges. Herein, an anchored cation strategy that immobilizes Cs+ on carbon vacancies was designed and innovatively implemented in MEA electrolyzer, enabling highly efficient CO2 electroreduction over commercial silver catalyst. Our approach achieves a CO partial current density of approximately 500 mA cm-2 in the MEA electrolyzer, three-fold enhancement compared to pure Ag. In situ Raman and theoretical analyses, combined with machine learning potentials, reveal anchored Cs induces an electric field that significantly promotes the adsorption of *CO2 - intermediates through performing muti-point energy calculations on each structure. Furthermore, reduced adsorption of *OH intermediates effectively hampers competing hydrogen evolution reaction, as clarified by disk electrode experiments and density functional theory studies. Additionally, coupling our system with commercial polysilicon solar cells yields a notable solar-to-CO energy conversion efficiency of 8.3 %. This study opens a new avenue for developing effective cation-promoting strategy in MEA reactors for efficient CO2RR.

Black hole spin estimation of XTE J2012+381 using simultaneous observations of Swift/XRT and NuSTAR

ABSTRACT A sufficiently precise measurement of black hole spin is required to carry out quantitative tests of the Kerr metric and to understand several phenomena related to astrophysical black holes. After 24 yr, XTE J2012+381 again underwent an outburst in 2022 December. In this work, we focused on the measurement of the spin and mass of the black hole candidate XTE J2012+381 using broad-band spectral analysis of X-ray data from Swift/XRT and NuSTAR. Using the relxillCp model, the spin and inclination of the source were found to be $0.883_{-0.061}^{+0.033}$ and $46.2_{-2.0}^{+3.7}$ deg, respectively, for high disc density ($i.e.\,\,10^{20}\,\,\mathrm{cm}^{-3}$). We further test our results for lamp-post geometry using the relxilllpCp model. The spin and inclination of the source were found to be $0.892_{-0.044}^{+0.020}$ and $43.1_{-1.2}^{+1.4}$ deg, respectively. Then ‘continuum-fitting’ method was used for the soft state to estimate the mass of BH and found to be $7.95_{-3.25}^{+7.65}\,\,\mathrm{M}_{\odot }$ and $7.48_{-2.75}^{+5.80}\,\,\mathrm{M}_{\odot }$ for the spin and inclination estimated from the relxillCp and relxilllpCp model, respectively. We used a distance of 5.4 kpc as measured by Gaia using the parallax method. This study also addresses the issue of supersolar iron abundance in XTE J2012+381 using reflionx-based reflection model and found high disc density for the source.

Optimizing bimetallic-insect exuviate melanin composite cathodes using response surface methodology to enhance the H2O2 yield and selectivity of the electro-Fenton process

Electro-Fenton is a fast and efficient oxidative degradation technology for treating many refractory organic substances. However, the poor electrochemical performance and power generation capacity of the cathode during electro-Fenton treatment limit H2O2 generation and pollutant removal. A FeCu bimetal–melanin cathode catalyst with high H2O2 production, low Fe3+ formation, and low resistance was optimized using response surface methodology. The composite desirability coefficient was as high as 0.9281, indicating that the two-factor setting conditions yielded the optimal response results. The synergistic effect between Fe and Cu and the ionic conductivity of melanin promote the conversion between Fe2+ and Fe3+ and improve the charge transfer ability of the cathode. The optimized Fe–Cu–Me cathodic catalyst had the highest H2O2 generation (217.91 ± 4.65 mg/L) and the lowest resistance value (190.33 Ω), 4.88 times and 5.05 % that of the unmodified cathode, respectively; also the lowest Fe3+ generation was 32 % and 73 % that of the Fe and FeCu cathodic catalysts, respectively. Moreover, the optimized Fe–Cu–Me cathode catalyst exhibited up to 80 % selectivity for 2-electron oxygen reduction reaction-catalyzed H2O2 generation based and excellent O2 and H2O2 adsorption performance on ring disk electrode analysis and density function theory calculation. This study is the first to use FeCu bimetals combined with insect exuviate melanin as a cathode catalyst for the in situ generation of cathodic H2O2. The high performance and stability of the fabricated electrocatalyst can be used in the subsequent treatment of wastewater through the electro-Fenton process, providing an innovative approach to improve the performance of the cathode.

Gas assisted binary black hole formation in AGN discs

ABSTRACT We investigate close encounters by stellar mass black holes (BHs) in the gaseous discs of active galactic nuclei (AGNs) as a potential formation channel of binary black holes (BBHs). We perform a series of 2D isothermal viscous hydrodynamical simulations within a shearing box prescription using the Eulerian grid code Athena++. We co-evolve the embedded BHs with the gas keeping track of the energetic dissipation and torquing of the BBH by gas gravitation and inertial forces. To probe the dependence of capture on the initial conditions, we discuss a suite of 345 simulations spanning BBH impact parameter (b) and local AGN disc density (ρ0). We identify a clear region in b − ρ0 space where gas assisted BBH capture is efficient. We find that the presence of gas leads to strong energetic dissipation during close encounters between unbound BHs, forming stably bound eccentric BBHs. We find that the gas dissipation during close encounters increases for systems with increased disc density and deeper periapsis passages rp, fitting a power law such that $\Delta E \propto \rho _0^{\alpha }r_{\mathrm{p}}^{\beta }$, where {α, β} = {1.01 ± 0.04, −0.43 ± 0.03}. Alternatively, the gas dissipation is approximately ΔE = 4.3MdvHvp, where Md is the mass of a single BH minidisc just prior to the encounter when the binary separation is 2rH (two binary Hill radii), vH and vp are the relative BH velocities at 2rH and at the first closest approach, respectively. We derive a prescription for capture which can be used in semi-analytical models of AGN. We do not find the dissipative dynamics observed in these systems to be in agreement with the simple gas dynamical friction models often used in the literature.

Can optic disc vessel density help in cases of residual disc elevation after shunt surgery in cases of idiopathic intracranial hypertension?

AimTo detect if we can use the reduction in the optic disc vessel density as an indicator to the reduction in intracranial tension in patients with residual optic disc elevation after shunt surgery as fundus examination in those cases is not conclusive.Patients and method21 patients with papilledema due to idiopathic intracranial hypertension underwent shunt surgery. Full neurological and ophthalmological assessments were done. The optic disc vessel density was measured before and 3 months after surgery. Patients were then divided according to the resolution of papilledema into 2 groups: 1) Residual disc elevation group. 2) Completely resolved disc edema group. CSF pressure was measured via lumber puncture preoperative for all patients and 3 months post-operative only for patients with residual disc edema. A comparison between both groups was done.ResultsThere was a highly statistically significant difference between the two groups as regard the papilledema grade (the residual disc elevation group had a higher grade of papilledema) with P-value=0.000. As regard the difference in the preoperative optic disc vessel density between the two groups, there were statistically significant differences (optic disc vessel density was more in the residual disc elevation group). As regard the postoperative optic disc vessel density, there were non-significant differences between the two groups in whole image, inside disc and peripapillary vessel density (either in macro or microvasculature).ConclusionThe optic disc vessel density decreased with normal postoperative CSF opening pressure in cases with residual disc elevation postoperatively. Thus, in cases of residual optic disc swelling after shunt surgery, we can detect the reduction of intracranial pressure by the reduction in the optic disc vessel density which is a safe non-invasive technique. That may help in cases of residual disc elevation.

Terrestrial planet formation from a ring: Long-term simulations accounting for the giant planet instability

The process leading to the formation of the terrestrial planet remains elusive. In a previous publication, we have shown that, if the first generation of planetesimals forms in a ring at ∼1 AU and the gas disk's density peaks at the ring location, planetary embryos of a few martian masses can grow and remain in the ring. In this work, we extend our simulations beyond the gas-disk stage, covering ∼200 Myr and accounting for the phase of giant planet instability, assumed to happen at different times. About half of the simulations form a pair of Venus and Earth analogues and, independently, about 10% form a Mars analogue. We find that the timing of the giant planet instability affects statistically the terrestrial system's excitation state and the timing of the last giant impacts. Hence a late instability (∼60 to 100 Myr after the Solar system's birth) is more consistent with a late Moon-formation time, as suggested by radioactive chronometers. However, the late veneer mass (LVM: mass accreted after the last giant impact) of Earth-sized planets suffering a giant impact after 80 My is usually an order of magnitude lower than the value inferred from geochemistry. In addition, the final angular momentum deficit (AMD) of the terrestrial planets tends to be too high. We tested the effect on the final AMD of the generation of debris during collisions and found that it is too small to change these conclusions. We argue that the best-case scenario is that the Moon-forming event occurred between 50 and 80 My, possibly just following the giant planet instability.

Detailed mapping of the Galactic disc structure in the solar neighbourhood through LAMOST K dwarfs

ABSTRACT The Galactic disc is one of the main components of the Milky Way, which contributes most of the luminosity. Its structure is essential for understanding the formation and evolution of the Milky Way. Using 174 443 K-type dwarf stars observed by both Large Sky Area Multi-Object Fiber Spectroscopic Telescope and Gaia Data Release 3, we study the disc density profile in the local volume within 1200 pc. In the azimuthal dimension, we find strong asymmetric signal of the thin disc. The surface density and the scale height of the southern disc significantly change versus the azimuthal angle at the same Galactocentric distance R. Meanwhile, in the vertical dimension, the scale height of the northern disc has quite different trend than that of the southern one. The scale height of the southern disc shows a decreasing trend with ϕ ∼ −2.5°, and change to an increasing one with ϕ ∼ 5.0°. Meanwhile, the scale height of the northern disc has a consistently smaller increase. Finally, we divide the entire sample into three subsamples based on metallicity and all three subsamples show significant non-axisymmetric and north–south asymmetric signals in the Galactic disc. Furthermore, we find that the scale height of the metal-poor ([Fe/H] < −0.4 dex) subsample in the northern disc is greater than that of the metal-rich ([Fe/H] > −0.1 dex) subsample. However, in the southern disc, the scale height exhibits varying relationships across different metallicity slices.

PDS 70 unveiled by star-hopping: Total intensity, polarimetry, and millimeter imaging modeled in concert

Most ground-based direct-imaging planet search campaigns use angular differential imaging that distorts the signal from extended sources, such as protoplanetary disks. In the case of the young system PDS 70, for which two planets were detected within the cavity of a protoplanetary disk, obtaining a reliable image of both planets and the disk is essential to understanding planet-disk interactions. Our goals are to reveal the true intensity of the planets and disk without self-subtraction effects for the first time, search for new giant planets beyond separations of 0.1$''$, and to study the morphology of the disk shaped by two massive planets. We present $YJHK$-band imaging, polarimetry, and spatially resolved spectroscopy of PDS 70 using near-simultaneous reference star differential imaging, also known as star-hopping. We created a radiative transfer model of the system to try to match the near-infrared imaging and polarimetric data within measurement errors. Sub-millimeter imaging data from ALMA were also modeled. Furthermore, we extracted the spectra of the planets and the disk and compared them. With strong constraints, we find that the disk is quite flared, with a scale height of sim 15<!PCT!> at the outer edge of the disk at sim 90 au, similar to some disks in the literature. The gap inside sim 50 au is estimated to have sim 1<!PCT!> of the dust density of the outer disk. The northeast outer disk arc seen in previous observations is likely the outer lip of the flared disk. Abundance ratios of sub-micron, micron, and grains estimated by the modeling indicate a shallow grain-size index greater than $-2.7$, instead of the canonical -3.5. There is both vertical and radial segregation of grains. Planet $c$ is well separated from the disk and has a spectrum similar to planet $b$, and it is clearly redder than the disk spectra. Planet $c$ is possibly associated with the sudden flaring of the disk starting at sim 50 au. We found no new planets in the system. If we assume DUSTY models and an age of 5 Myrs, this indicates no new planets more massive than 5 outside a 12 au separation.

Reversible, irreversible, and mixed regimes for periodically driven disks in random obstacle arrays.

We examine an assembly of repulsive disks interacting with a random obstacle array under a periodic drive and find a transition from reversible to irreversible dynamics as a function of drive amplitude or disk density. At low densities and drives, the system rapidly forms a reversible state where the disks return to their exact positions at the end of each cycle. In contrast, at high amplitudes or high densities, the system enters an irreversible state where the disks exhibit normal diffusion. Between these two regimes, there can be an intermediate irreversible state where most of the system is reversible, but localized irreversible regions are present that are prevented from spreading through the system due to a screening effect from the obstacles. We also find states that we term "combinatorial reversible states" in which the disks return to their original positions after multiple driving cycles. In these states, individual disks exchange positions but form the same configurations during the subcycles of the larger reversible cycle.

A Multiwavelength Study of the Hard and Soft States of MAXI J1820+070 During Its 2018 Outburst

We present a comprehensive multiwavelength spectral analysis of the black hole (BH) X-ray binary MAXI J1820+070 during its 2018 outburst, utilizing AstroSat far-UV, soft X-ray, and hard X-ray data, along with (quasi-)simultaneous optical and X-ray data from the Las Cumbres Observatory and NICER, respectively. In the soft state, we detect soft X-ray and UV/optical excess components over and above the intrinsic accretion disk emission (kT in ∼ 0.58 keV) and a steep X-ray power-law component. The soft X-ray excess is consistent with a high-temperature blackbody (kT ∼ 0.79 keV), while the UV/optical excess is described by UV emission lines and two low-temperature blackbody components (kT ∼ 3.87 and ∼0.75 eV). Employing continuum spectral fitting, we determine the BH spin parameter (a = 0.77 ± 0.21), using the jet inclination angle of 64° ± 5° and a mass spanning 5–10 M ☉. In the hard state (HS), we observe a significantly enhanced optical/UV excess component, indicating a stronger reprocessed emission in the outer disk. Broadband X-ray spectroscopy in the HS reveals a two-component corona, each associated with its reflection component, in addition to the disk emission (kT in ∼ 0.19 keV). The softer coronal component dominates the bolometric X-ray luminosity and produces broader relativistic reflection features, while the harder component gets reflected far from the inner disk, yielding narrow reflection features. Furthermore, our analysis in the HS suggests a substantial truncation of the inner disk (≳51 gravitational radii) and a high disk density (∼1020 cm−3).

The role of density breaks in driving spiral structure in disc galaxies

ABSTRACT It is well established that stellar discs are destabilized by sharp features in their phase space, driving recurrent spiral modes. We explore the extent to which surface-density breaks in disc galaxies – which represent sharp changes in the gradient of the disc density – drive new spiral modes. We employ linear perturbation theory to investigate how disc breaks alter the eigenmode spectrum of an otherwise pure exponential disc. We find that the presence of a density break gives rise to a set of new, vigorously growing, modes. For a given multiplicity, these edge modes occur in pairs, with closely separated resonances between each pair. The growth rate of edge modes decreases when the break is weakened or moved outward to lower-density regions of the disc. Both down- and up-bending profiles excite edge modes, whose origin can be best understood via the gravitational torques they exert on the underlying disc. When the profile is down-bending (Type II) the faster growing mode is the inner one while in the up-bending (Type III) case the outer mode is faster growing. In both cases, the faster growing mode has a corotation almost coincident with the break. We show that the torques of the edge modes tend to smoothen the break.

Electrically controlled nonvolatile switching of single-atom magnetism in a Dy@C84 single-molecule transistor

Single-atom magnetism switching is a key technique towards the ultimate data storage density of computer hard disks and has been conceptually realized by leveraging the spin bistability of a magnetic atom under a scanning tunnelling microscope. However, it has rarely been applied to solid-state transistors, an advancement that would be highly desirable for enabling various applications. Here, we demonstrate realization of the electrically controlled Zeeman effect in Dy@C84 single-molecule transistors, thus revealing a transition in the magnetic moment from 3.8 μB\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\mu }_{{{{{{\\rm{B}}}}}}}$$\\end{document} to 5.1 μB\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\mu }_{{{{{{\\rm{B}}}}}}}$$\\end{document} for the ground-state GN at an electric field strength of 3−\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$-$$\\end{document}10 MV/cm. The consequent magnetoresistance significantly increases from 600% to 1100% at the resonant tunneling point. Density functional theory calculations further corroborate our realization of nonvolatile switching of single-atom magnetism, and the switching stability emanates from an energy barrier of 92 meV for atomic relaxation. These results highlight the potential of using endohedral metallofullerenes for high-temperature, high-stability, high-speed, and compact single-atom magnetic data storage.

Scalable Synthesis and Characterisation of a Liquid 2,3,5,6-tetraallylbenzene-1,4-diol Quinone

Organic redox species are finding uses in numerous research and development applications, such as electrochemical sensors, batteries, and production of chemicals. This paper presents a synthesis pathway of a redox-active liquid of 2,3,5,6-tetraallylbenzene-1,4-diol. The synthesis of 2,3,5,6-tetraallylbenzene-1,4-diol was found repeatable at approximately 60 g scale, with a total conversion of 92% across four synthesis steps. High purity was achieved with no further purification. The intermediates and compounds were characterized using attenuated total reflectance infrared spectroscopy, proton nuclear magnetic resonance, differential scanning calorimetry, thermogravimetric analysis, cyclic voltammetry, rotating disk electrode voltammetry, density, and viscosity measurements. The structural characterization verified the structure of 2,3,5,6-tetraallylbenzene-1,4-diol. Electrochemical characterization revealed a quasi-reversible response, a diffusion coefficient similar to the diffusion coefficient of hydroquinone.

Dust growth and pebble formation in the initial stages of protoplanetary disk evolution

Aims. The initial stages of planet formation may start concurrently with the formation of a gas-dust protoplanetary disk. This makes the study of the earliest stages of protoplanetary disk formation crucially important. Here we focus on dust growth and pebble formation in a protoplanetary disk that is still accreting from a parental cloud core. Methods. We have developed an original three-dimensional numerical hydrodynamics code, which computes the collapse of rotating clouds and disk formation on nested meshes using a novel hybrid Coarray Fortran-OpenMP approach for distributed and shared memory parallelization. Dust dynamics and growth are also included in the simulations. Results. We found that the dust growth from ~1 µm to 1–10 mm already occurs in the initial few thousand years of disk evolution but the Stokes number hardly exceeds 0.1 because of higher disk densities and temperatures compared to the minimum mass Solar nebular. The ratio of the dust-to-gas vertical scale heights remains rather modest, 0.2–0.5, which may be explained by the perturbing action of spiral arms that develop in the disk soon after its formation. The dust-to-gas mass ratio in the disk midplane is highly nonhomogeneous throughout the disk extent and is in general enhanced by a factor of several compared to the fiducial 1:100 value. Low St hinders strong dust accumulation in the spiral arms compared to the rest of the disk and the nonsteady nature of the spirals is also an obstacle. The spatial distribution of pebbles in the disk midplane exhibits a highly nonhomogeneous and patchy character. The total mass of pebbles in the disk increases with time and reaches a few tens of Earth masses after a few tens of thousand years of disk evolution. Conclusions. We found that protoplanetary disks with an age ≤20 kyr can possess notable amounts of pebbles and feature dust-togas density enhancements in the disk midplane. Hence, these young disks can already be ripe for the planet formation process to start. Multidimensional numerical models of disk formation that consider the coevolution of gas and dust including dust growth are important to improve our understanding of planet formation.

NICER views moderate, strong, and extreme photospheric expansion bursts from the ultracompact X-ray binary 4U 1820–30

Type I X-ray bursts in the ultracompact X-ray binary 4U 1820–30 are powered by the unstable thermonuclear burning of hydrogen-deficient material. We report the detection of 15 type I X-ray bursts from 4U 1820–30 observed by NICER between 2017 and 2023. All these bursts occurred in the low state for the persistent flux in the range of 2.5–8 × 10−9 erg s−1 cm−2 in 0.1–250 keV. The burst spectra during the tail can be nicely explained by blackbody model. However, for the first ~5 s after the burst onset, the time-resolved spectra showed strong deviations from the blackbody model. The significant improvement of the fit can be obtained by taking into account of the enhanced persistent emission due to the Poynting–Robterson drag, the extra emission modeled by another blackbody component, or by the reflection from the surrounding accretion disk. The reflection model provides a self-consistent and physically motivated explanation. We find that the accretion disk density changed with 0.5 s delay in response to the burst radiation, which indicates the distortion of the accretion disk during X-ray bursts. From the time-resolved spectroscopy, all bursts showed the characteristic of photospheric radius expansion (PRE). We find one superexpansion burst with the extreme photospheric radius rph > 103 km and blackbody temperature of ~0.2 keV, 13 strong PRE bursts for rph > 102 km, and one moderate PRE burst for rph ~ 55 km.

High-resolution ALMA observations of compact discs in the wide-binary system Sz 65 and Sz 66

Context. Substructures in disc density are ubiquitous in the bright extended discs that are observed with high resolution. These substructures are intimately linked to the physical mechanisms driving planet formation and disc evolution. Surveys of star-forming regions find that most discs are in fact compact, less luminous, and do not exhibit these same substructures. It remains unclear whether compact discs also have similar substructures or if they are featureless. This suggests that different planet formation and disc evolution mechanisms operate in these discs. Aims. We investigated evidence of substructure within two compact discs around the stars Sz 65 and Sz 66 using high angular resolution observations with ALMA at 1.3 mm. The two stars form a wide-binary system with 6″.36 separation. The continuum observations achieve a synthesised beam size of 0″.026 × 0″.018, equivalent to about 4.0 × 2.8 au, enabling a search for substructure on these spatial scales and a characterisation of the gas and dust disc sizes with high precision. Methods. We analysed the data in the image plane through an analysis of reconstructed images, as well as in the uv plane by non-parametrically modelling the visibilities and by an analysis of the 12CO (2–1) emission line. Comparisons were made with highresolution observations of compact discs and radially extended discs. Results. We find evidence of substructure in the dust distribution of Sz 65, namely a shallow gap centred at ≈20 au, with an emission ring exterior to it at the outer edge of the disc. Ninety percent of the measured continuum flux is found within 27 au, and the distance for 12CO is 161 au. The observations show that Sz 66 is very compact: 90% of the flux is contained within 16 au, and 90% of the molecular gas flux lies within 64 au. Conclusions. While the overall prevalence and diversity of substructure in compact discs relative to larger discs is yet to be determined, we find evidence that substructures can exist in compact discs.

Orbital Torus Imaging: Acceleration, Density, and Dark Matter in the Galactic Disk Measured with Element Abundance Gradients

Under the assumption of a simple and time-invariant gravitational potential, many Galactic dynamics techniques infer the milky Way’s mass and dark matter distributions from stellar kinematic observations. These methods typically rely on parameterized potential models of the Galaxy and must take into account nontrivial survey selection effects, because they make use of the density of stars in phase space. Large-scale spectroscopic surveys now supply information beyond kinematics in the form of precise stellar label measurements (especially element abundances). These element abundances are known to correlate with orbital actions or other dynamical invariants. Here, we use the Orbital Torus Imaging framework that uses abundance gradients in phase space to map orbits. In many cases these gradients can be measured without detailed knowledge of the selection function. We use stellar surface abundances from the Apache Point Observatory Galactic Evolution Experiment survey combined with kinematic data from the Gaia mission. Our method reveals the vertical (z-direction) orbital structure in the Galaxy and enables empirical measurements of the vertical acceleration field and orbital frequencies in the disk. From these measurements, we infer the total surface mass density, Σ, and midplane volume density, ρ 0, as a function of Galactocentric radius and height. Around the Sun, we find Σ⊙(z=1.1kpc)=72−9+6M⊙pc−2 and ρ⊙(z=0)=0.081−0.009+0.015M⊙pc−3 using the most constraining abundance ratio, [Mg/Fe]. This corresponds to a dark matter contribution in surface density of Σ⊙,DM(z = 1.1 kpc) = 24 ± 4 M ⊙ pc−2, and in total volume mass density of ρ ⊙,DM(z = 0) = 0.011 ± 0.002 M ⊙ pc−3. Moreover, using these mass density values we estimate the scale length of the low-α disk to be h R = 2.24 ± 0.06 kpc.