Density-constrained Time-dependent Hartree-Fock Research Articles

Modeling the fusion process with a modified Woods-Saxon potential in Ar40 -induced fusion reactions

The evaporation cross sections in fusion reactions by $^{40}\mathrm{Ar}$ bombarding deformed nuclei were compared to calculations using a modified Woods-Saxon potential model together with the standard statistical model. The results show that the predictions overestimate the experimental yields of these reaction products up to two orders of magnitude as the charge number of compound nuclei (${Z}_{CN}\ensuremath{\ge}85$) increases, and suggest that the fusion process strongly depends on the orientation of the deformed target according to density-constrained time-dependent Hartree-Fock calculations.

Influence of the tensor interaction on heavy-ion fusion cross sections

[Background] While the tensor interaction has been shown to significantly affect the nuclear structure of exotic nuclei, its influence on nuclear reactions has only recently been investigated. The primary reason for this neglect is the fact that most studies of nuclear dynamics do not include the tensor force at all in their models. Indeed, only a few Skyrme parametrizations consider the tensor interaction in parameter determination. With modern research facilities extending our ability to probe exotic nuclei, a correct description of nuclear dynamics and heavy-ion fusion is vital to both supporting and leading experimental efforts. [Method] Fusion cross sections are calculated using ion-ion potentials generated by the fully microscopic density-constrained time-dependent Hartree-Fock (DC-TDHF) method with the complete Skyrme tensor interaction. [Results] For light nuclei, the tensor force only slightly changes the sub-barrier fusion cross sections at very low energies. Heavier nuclei, however, begin to exhibit a substantial hindrance effect in the sub-barrier region. This effect is strongest in spin-unsaturated systems, though can manifest in other configurations as well. Static, ground state deformation effects of the tensor force can also affect cross sections by shifting the fusion barrier. [Conclusions] The tensor interaction has a measurable effect on the fusion cross sections of nuclei spanning the nuclear chart. The effect comes from both static effects present in the ground state and dynamic processes arising from the time evolution of the system. This motivates the development of a modern Skyrme parameter set that includes all time-odd and tensor terms and that studies moving forward should include the tensor force to ensure a more robust and complete description of nuclei.

Absence of hindrance in a microscopic C12+C12 fusion study

Background: Studies of low-energy fusion of light nuclei are important in astrophysical modeling, with small variations in reaction rates having a large impact on nucleosynthesis yields. Due to the lack of experimental data at astrophysical energies, extrapolation and microscopic methods are needed to model fusion probabilities. Purpose: To investigate deep sub-barrier $^{12}$C+$^{12}$C fusion cross sections and establish trends for the $S$ factor. Method: Microscopic methods based on static Hartree-Fock (HF) and time-dependent Hartree-Fock (TDHF) mean-field theory are used to obtain $^{12}$C+$^{12}$C ion-ion fusion potentials. Fusion cross sections and astrophysical $S$ factors are then calculated using the incoming wave boundary condition (IWBC) method. Results: Both density-constrained frozen Hartree-Fock (DCFHF) and density-constrained TDHF (DC-TDHF) predict a rising $S$ factor at low energies, with DC-TDHF predicting a slight damping in the deep sub-barrier region ($\approx1$~MeV). Comparison between DC-TDHF calculations and maximum experimental cross-sections in the resonance peaks are good. However the discrepancy in experimental low energy results inhibits interpretation of the trend. Conclusions: Using the fully microscopic DCFHF and DC-TDHF methods, no $S$ factor maximum is observed in the $^{12}$C+$^{12}$C fusion reaction. In addition, no extreme sub-barrier hindrance is predicted at low energies. The development of a microscopic theory of fusion including resonance effects, as well as further experiments at lower energies must be done before the deep sub-barrier behavior of the reaction can be established.

Influence of the tensor force on the microscopic heavy-ion interaction potential

Background: The tensor interaction is known to play an important role in the nuclear structure studies of exotic nuclei. However, most microscopic studies of low-energy nuclear reactions neglect the tensor force, resulting in a lack of knowledge concerning the effect of the tensor force on HIC...... Purpose: The theoretical study of the influence of the tensor force on heavy-ion interaction potentials is required to further our understanding of the microscopic mechanisms entailed in fusion dynamics. Method: The full Skyrme tensor force is implemented into the static Hartree-Fock and dynamic density-constrained time-dependent Hartree-Fock (DC-TDHF) theory to calculate both static (frozen density) and dynamic microscopic interaction potentials for reactions involving exotic and stable nuclei. Results: The static potentials are found to be systematically higher than the dynamical results, which are attributed to the microscopic dynamical effects included in TDHF. We also show that the dynamical potential barriers vary more significantly by the inclusion of tensor force than the static barriers. The influence of isoscalar and isovector tensor terms is also investigated with the TIJ set of forces. For light systems, the tensor force is found to have an imperceptible effect on the nucleus-nucleus potential. However, for medium and heavy spin-unsaturated reactions, the potentials may change from a fraction of an MeV to almost 2 MeV by the inclusion of tensor force, indicating a strong impact of the tensor force on sub-barrier fusion. Conclusions: The tensor force could indeed play a large role in the fusion of nuclei, with spin-unsaturated systems seeing a systematic increase in ion-ion barrier height and width. This fusion hindrance is partly due to static, ground state effects from the inclusion of the tensor force, though additional hindrance appears when studying nuclear dynamics.

Effect of Pauli repulsion and transfer on fusion

The effect of the Pauli exclusion principle on the nucleus-nucleus bare potential is studied using a new density-constrained extension of the Frozen-Hartree-Fock (DCFHF) technique. The resulting potentials exhibit a repulsion at short distance. The charge product dependence of this Pauli repulsion is investigated. Dynamical effects are then included in the potential with the density-constrained time-dependent Hartree-Fock (DCTDHF) method. In particular, isovector contributions to this potential are used to investigate the role of transfer on fusion, resulting in a lowering of the inner part of the potential for systems with positive Q-value transfer channels.

Sensitivity of the fusion cross section to the density dependence of the symmetry energy

It is the aim of this paper to discuss the impact of nuclear fusion on the EOS. This is a timely subject given the expected availability of increasingly exotic beams at rare isotope facilities\,\cite{balantekin2014}. In practice, we focus on $^{48}$Ca+$^{48}$Ca fusion. We employ three different approaches to calculate fusion cross-sections for a set of energy density functionals with systematically varying nuclear matter properties. Fusion calculations are performed using frozen densities, using a dynamic microscopic method based on density-constrained time-dependent Hartree-Fock (DC-TDHF) approach, as well as direct TDHF study of above barrier cross-sections. For these studies, we employ a family of Skyrme parametrizations with systematically varied nuclear matter properties. We find a slight preference for forces which deliver a slope of symmetry energy of $L\approx 50$\,MeV that corresponds to a neutron-skin thickness of $^{48}$Ca of $R_\mathrm{skin}\!=\!(0.180\!-\!0.210)$\,fm.

Sub-barrier enhancement of fusion as compared to a microscopic method inO18+C12

Measurement of the energy dependence of the fusion cross-sec on at sub-barrier energies provides an important test for theoretical models of fusion. To extend the measurement of fusion cross-sections in the sub-barrier domain for the 18O+12C system. Use the new experimental data to confront microscopic calculations of fusion. Evaporation residues produced in fusion of 18O ions with 12C target nuclei were detected with good geometric efficiency and identified by measuring their energy and time-of-flight. Theoretical calculations with a density constrained time dependent Hartree-Fock (DC-TDHF) theory include for the first time the effect of pairing on the fusion cross-section. Comparison of the measured fusion excitation function with the predictions of the DC-TDHF calculations reveal that the experimental data exhibits a smaller decrease in cross-section with decreasing energy than is theoretically predicted. The larger cross-sections observed at the lowest energies measured indicate a larger tunneling probability for the fusion process. This larger probability can be associated with a smaller, narrower fusion barrier than presently included in the theoretical calculations.

Microscopic DC-TDHF study of heavy-ion potentials and fusion cross sections

We study heavy-ion fusion reactions at energies near the Coulomb barrier, in particular with neutron-rich radioactive ion beams. Dynamic microscopic calculations are carried out on a three-dimensional lattice using the Density-Constrained Time-Dependent Hartree-Fock (DC-TDHF) method. New results are presented for the 132Sn+40Ca system which are compared to 132Sn+48Ca studied earlier. Our theoretical fusion cross-sections agree surprisingly well with recent data measured at HRIBF. We also study the near- and sub-barrier fusion of 24,16O on 12C which is important to determine the composition and heating of the crust of accreting neutron stars.

Microscopic study of theSn132,124+Zr96reactions: Dynamic excitation energy, energy-dependent heavy-ion potential, and capture cross section

We study reactions between neutron-rich $^{132}\mathrm{Sn}$ nucleus and $^{96}\mathrm{Zr}$ within a dynamic microscopic theory at energies in the vicinity of the ion-ion potential barrier peak, and we compare the properties to those of the stable system $^{124}\mathrm{Sn}$$+$$^{96}\mathrm{Zr}$. The calculations are carried out on a three-dimensional lattice using the density-constrained time-dependent Hartree-Fock method. In particular, we calculate the dynamic excitation energy ${E}^{*}(t)$ during the initial stages of the collision. The barrier heights and widths of the heavy-ion potential increase substantially with ${E}_{\mathrm{c}.\mathrm{m}.}$ energy. The capture cross sections for the two reactions are of similar magnitude, but the interaction barrier for the neutron-rich system is found to be significantly (9 MeV) lower. A comparison with recently measured data is given.

Density-constrained time-dependent Hartree-Fock calculation of 16O + 208Pb fusion cross-sections

We present a fully microscopic study of the 16O + 208Pb fusion using the density-constrained time-dependent Hartree-Fock theory. The calculated fusion cross-sections are in good agreement with the experimental data for the entire energy range indicating that the incorporation of dynamical effects is crucial in describing heavy-ion fusion.

64Ni+64Nifusion reaction calculated with the density-constrained time-dependent Hartree-Fock formalism

We study fusion reactions of the {sup 64}Ni+{sup 64}Ni system using the density-constrained time-dependent Hartree-Fock (TDHF) formalism. In this formalism the fusion barriers are directly obtained from TDHF dynamics. In addition, we incorporate the entrance channel alignments of the slightly deformed (oblate) {sup 64}Ni nuclei resulting from dynamical Coulomb excitation. We show that alignment leads to a fusion barrier distribution and alters the naive picture for defining which energies are actually sub-barrier. We also show that core orientation effects could play a significant role in fusion cross section calculations.