Dense Filamentary Structures Research Articles

Internal 1000 au Scale Structures of the R CrA Cluster-forming Cloud. I. Filamentary Structures

We report Atacama Large Millimeter/submillimeter Array/Atacama Compact Array observations of a high-density region of the Corona Australis cloud forming a young star cluster, and the results of resolving internal structures. In addition to embedded Class 0/I protostars in the continuum, a number of complex dense filamentary structures are detected in the C18O and SO lines by the 7 m array. These are substructures of the molecular clump that are detected by the total power array as extended emission. We identify 101 and 37 filamentary structures with widths of a few thousand astronomical units in C18O and SO, respectively, which are called feathers. The typical column density of the feathers in C18O is about 1022 cm−2, and the volume density and line mass are ∼105 cm−3 and a few M ☉ pc−1, respectively. This line mass is significantly smaller than the critical line mass expected for cold and dense gas. These structures have complex velocity fields, indicating a turbulent interior. The number of feathers associated with Class 0/I protostars is only ∼10, indicating that most of them do not form stars but rather are transient structures. The formation of feathers can be interpreted as a result of colliding gas flow because the morphology is well reproduced by MHD simulations, and this is supported by the presence of H i shells in the vicinity. The colliding gas flows may accumulate gas and form filaments and feathers, and trigger the active star formation of the R CrA cluster.

B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main

Abstract We present 850 μm polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where N H 2 < 0.93 × 10 22 cm−2 (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at N H 2 ≈ 4.6 × 10 22 cm−2. This can be interpreted as a signature of core formation. At N H 2 ≈ 16 × 10 22 cm−2, magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B POS = 60–300 μG)) using the Davis–Chandrasekhar–Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.

Dense gas formation in the Musca filament due to the dissipation of a supersonic converging flow

Observations with theHerschelSpace Telescope have established that most star forming gas is organised in filaments, a finding that is supported by numerical simulations of the supersonic interstellar medium (ISM) where dense filamentary structures are ubiquitous. We aim to understand the formation of these dense structures by performing observations covering the12CO(4→3),12CO(3→2), and various CO(2–1) isotopologue lines of the Musca filament, using the APEX telescope. The observed CO intensities and line ratios cannot be explained by PDR (photodissociation region) emission because of the low ambient far-UV field that is strongly constrained by the non-detections of the [C II] line at 158μm and the [O I] line at 63μm, observed with the upGREAT receiver on SOFIA, as well as a weak [C I] 609μm line detected with APEX. We propose that the observations are consistent with a scenario in which shock excitation gives rise to warm and dense gas close to the highest column density regions in the Musca filament. Using shock models, we find that the CO observations can be consistent with excitation by J-type low-velocity shocks. A qualitative comparison of the observed CO spectra with synthetic observations of dynamic filament formation simulations shows a good agreement with the signature of a filament accretion shock that forms a cold and dense filament from a converging flow. The Musca filament is thus found to be dense molecular post-shock gas. Filament accretion shocks that dissipate the supersonic kinetic energy of converging flows in the ISM may thus play a prominent role in the evolution of cold and dense filamentary structures.

The Galactic interstellar medium: foregrounds and star formation

AbstractThis review presents briefly two aspects of Galactic interstellar medium science that seem relevant for studying EoR. First, we give some statistical properties of the Galactic foreground emission in the diffuse regions of the sky. The properties of the emission observed in projection on the plane of the sky are then related to how matter is organised along the line of sight. The diffuse atomic gas is multi-phase, with dense filamentary structures occupying only about 1% of the volume but contributing to about 50% of the emission. The second part of the review presents aspect of structure formation in the Galactic interstellar medium that could be relevant for the subgrid physics used to model the formation of the first stars.

Are fibres in molecular cloud filaments real objects?

We analyse the morphology and kinematics of dense filamentary structures produced in a numerical simulation of a star--forming cloud of $1.4 \times 10^4 \, \Msun$ evolving under their own self--gravity in a magnetized medium. This study is motivated by recent observations of velocity--coherent substructures ("fibres") in star-forming filaments. We find such "fibres" ubiquitously in our simulated filament. We found that a fibre in one projection is not necessarily a fibre in another projection, and thus, caution should be taken into account when considering them as real objects. We found that only the densest parts of the filament ($\sim$30\% of the densest volume, which contains $\sim$70\% of the mass) belong to fibres in 2 projections. Moreover, it is quite common that they are formed by separated density enhancements superposed along the line of sight. Observations of fibres can yield insight into the level of turbulent substructure driven by gravity, but care should be taken in interpreting the results given the problem of line of sight superposition. We also studied the morphology and kinematics of the 3D skeleton (spine), finding that subfilaments accrete structured material mainly along the magnetic field lines, which are preferentially perpendicular to the skeleton. The magnetic field is at the same time dragged by the velocity field due to the gravitational collapse.

ATLASGAL: A Galaxy-wide sample of dense filamentary structures

[Abridged] Aims. We study the properties of filamentary structures from the ATLASGAL survey. Methods. We use the DisPerSE algorithm to identify spatially coherent structures located across the inner-Galaxy (300 < l < 60 and |b| < 1.5). Results. We have determined distances, masses and physical sizes for 241 of the filamentary structures. We find a median distance of 3.8 kpc, a mean mass of a few 10^3 m_sun, a mean length of ~6pc and a mass-to-length ratio of (M/L) ~200-2000M_sun/ pc. We also find that these filamentary structures are tightly correlated with the spiral arms in longitude and velocity, and that their semi-major axis is preferentially aligned parallel to the Galactic mid-plane and therefore with the direction of large-scale Galactic magnetic field. We find many examples where the dense filaments identified in ATLASGAL are associated with larger scale filamentary structures (~100 pc), and argue that this is likely to be common, and as such these may indicate a connection between large-scale Galactic dynamics and star formation. Conclusions. We have produced a large and Galaxy-wide catalogue of dense filamentary structures that are representative of a particular size and mass range not previously well studied in the literature. Analyses of the properties and distribution of these filaments reveals that they are correlated with the spiral arms and make a significant contribution to star formation in the Galaxy. Massive star formation is ongoing within ~20% of the filaments and is strongly correlated with the filaments with the largest mass-to- length ratios. The luminosity of the embedded sources has a similar distribution to the Galactic-wide samples of young massive stars and can therefore be considered to be representative.

Power spectra of outflow-driven turbulence

We investigate the power spectra of outflow-driven turbulence through high-resolution three-dimensional isothermal numerical simulations where the turbulence is driven locally in real-space by a simple spherical outflow model. The resulting turbulent flow saturates at an average Mach number of ~2.5 and is analysed through density and velocity power spectra, including an investigation of the evolution of the solenoidal and compressional components. We obtain a shallow density power spectrum with a slope of ~-1.2 attributed to the presence of a network of localised dense filamentary structures formed by strong shock interactions. The total velocity power spectrum slope is found to be ~-2.0, representative of Burgers shock dominated turbulence model. The density weighted velocity power spectrum slope is measured as ~-1.6, slightly less than the expected Kolmogorov scaling value (slope of -5/3) found in previous works. The discrepancy may be caused by the nature of our real space driving model and we suggest there is no universal scaling law for supersonic compressible turbulence. We find that on average, solenoidal modes slightly dominate in our turbulence model as the interaction between strong curved compressible shocks generates solenoidal modes, and compressible modes decay faster.

THE ROLE OF TURBULENCE AND MAGNETIC FIELDS IN SIMULATED FILAMENTARY STRUCTURE

We use numerical simulations of turbulent cluster-forming regions to study the nature of dense filamentary structures in star formation. Using four hydrodynamic and magnetohydrodynamic simulations chosen to match observations, we identify filaments in the resulting column density maps and analyze their properties. We calculate the radial column density profiles of the filaments every 0.05 Myr and fit the profiles with the modified isothermal and pressure confined isothermal cylinder models, finding reasonable fits for either model. The filaments formed in the simulations have similar radial column density profiles to those observed. Magnetic fields provide additional pressure support to the filaments, making `puffier' filaments less prone to fragmentation than in the pure hydrodynamic case, which continue to condense at a slower rate. In the higher density simulations, the filaments grow faster through the increased importance of gravity. Not all of the filaments identified in the simulations will evolve to form stars: some expand and disperse. Given these different filament evolutionary paths, the trends in bulk filament width as a function of time, magnetic field strength, or density, are weak, and all cases are reasonably consistent with the finding of a constant filament width in different star-forming regions. In the simulations, the mean FWHM lies between 0.06 and 0.26 pc for all times and initial conditions, with most lying between 0.1 to 0.15 pc; the range in FWHMs are, however, larger than seen in typical Herschel analyses. Finally, the filaments display a wealth of substructure similar to the recent discovery of filament bundles in Taurus.

A WIDE-FIELD NEAR- AND MID-INFRARED CENSUS OF YOUNG STARS IN NGC 6334

This paper presents a study of the rate and efficiency of star formation in the NGC 6334 star forming region. We obtained observations at J, H, and Ks taken with the NOAO Extremely Wide-Field Infrared Imager (NEWFIRM) and combined them with observations taken with the Infrared Array Camera (IRAC) camera on the Spitzer Space Telescope at wavelengths {\lambda} = 3.6, 4.5, 5.8, and 8.0 {\mu}m. We also analyzed previous observations taken at 24 {\mu}m using the Spitzer MIPS camera as part of the MIPSGAL survey. We have produced a point source catalog with >700,000 entries. We have identified 2283 YSO candidates, 375 Class I YSOs and 1908 Class II YSOs using a combination of existing IRAC-based color classification schemes that we have extended and validated to the near-IR for use with warm Spitzer data. We have identified multiple new sites of ongoing star formation activity along filamentary structures extending tens of parsecs beyond the central molecular ridge of NGC 6334. By mapping the extinction we derived an estimate for the gas mass, 2.2 x 10^5 M_sun. The heavy concentration of protostars along the dense filamentary structures indicates that NGC 6334 may be undergoing a "mini-starburst" event with {\Sigma}{SFR}>8.2 M_sun Myr^-1 pc^-2 and SFE>0.10. We have used these estimates to place NGC 6334 in the Kennicutt-Schmidt diagram to help bridge the gap between observations of local low-mass star forming regions and star formation in other galaxies.

Ionizing feedback from massive stars in massive clusters - II. Disruption of bound clusters by photoionization

We present an SPH parameter study of the dynamical effect of photoionization from O--type stars on star--forming clouds of a range of masses and sizes during the time window before supernovae explode. Our model clouds all have the same degree of turbulent support initially, the ratio of turbulent kinetic energy to gravitational potential energy being set to $E_{\rm kin}/|E_{\rm pot}|$=0.7. We allow the clouds to form stars and study the dynamical effects of the ionizing radiation from the massive stars or clusters born within them. We find that dense filamentary structures and accretion flows limit the quantities of gas that can be ionized, particularly in the higher density clusters. More importantly, the higher escape velocities in our more massive (10$^{6}$M$_{\odot}$) clouds prevent the HII regions from sweeping up and expelling significant quantities of gas, so that the most massive clouds are largely dynamically unaffected by ionizing feedback. However, feedback has a profound effect on the lower--density 10$^{4}$ and 10$^{5}$M$_{\odot}$ clouds in our study, creating vast evacuated bubbles and expelling tens of percent of the neutral gas in the 3Myr timescale before the first supernovae are expected to detonate, resulting in clouds highly porous to both photons and supernova ejecta.

The M 16 molecular complex under the influence of NGC 6611

We present Herschel images from the HOBYS key program of the Eagle Nebula (M16) in the far-infrared and sub-millimetre, using the PACS and SPIRE cameras at 70{\mu}m, 160{\mu}m, 250{\mu}m, 350{\mu}m, 500{\mu}m. M16, home to the Pillars of Creation, is largely under the influence of the nearby NGC6611 high-mass star cluster. The Herschel images reveal a clear dust temperature gradient running away from the centre of the cavity carved by the OB cluster. We investigate the heating effect of NGC6611 on the entire M16 star-forming complex seen by Herschel including the diffuse cloud environment and the dense filamentary structures identified in this region. In addition, we interpret the three-dimensional geometry of M16 with respect to the nebula, its surrounding environment, and the NGC6611 cavity. The dust temperature and column density maps reveal a prominent eastern filament running north-south and away from the high-mass star-forming central region and the NGC6611 cluster, as well as a northern filament which extends around and away from the cluster. The dust temperature in each of these filaments decreases with increasing distance from the NGC6611 cluster, indicating a heating penetration depth of \sim 10 pc in each direction in 3 - 6 \times 10^{22} cm-2 column density filaments. We show that in high-mass star-forming regions OB clusters impact the temperature of future star-forming sites, modifying the initial conditions for collapse and effecting the evolutionary criteria of protostars developed from spectral energy distributions. Possible scenarios for the origin of the morphology seen in this region are discussed, including a western equivalent to the eastern filament, which was destroyed by the creation of the OB cluster and its subsequent winds and radiation.

Turbulent Flow–driven Molecular Cloud Formation: A Solution to the Post–T Tauri Problem?

We suggest that molecular clouds can be formed on short time scales by compressions from large scale streams in the interstellar medium (ISM). In particular, we argue that the Taurus-Auriga complex, with filaments of 10-20 pc $\times$ 2-5 pc, most have been formed by H I flows in $\lesssim 3$Myr, explaining the absence of post-T Tauri stars in the region with ages $\gtrsim 3$ Myr. Observations in the 21 cm line of the H I `halos' around the Taurus molecular gas show many features (broad asymmetric profiles, velocity shifts of H I relative to $^{12}$CO) predicted by our MHD numerical simulations, in which large-scale H I streams collide to produce dense filamentary structures. This rapid evolution is possible because the H I flows producing and disrupting the cloud have much higher velocities (5-10 kms) than present in the molecular gas resulting from the colliding flows. The simulations suggest that such flows can occur from the global ISM turbulence without requiring a single triggering event such as a SN explosion.