Demineralized Bone Matrix Gel Research Articles

A Prospective, Multi-Center, Double-Blind, Randomized Study to Evaluate the Efficacy and Safety of the Synthetic Bone Graft Material DBM Gel with rhBMP-2 versus DBM Gel Used during the TLIF Procedure in Patients with Lumbar Disc Disease.

ObjectiveThis study is to evaluate the efficacy and safety of demineralized bone matrix (DBM) gel versus DBM gel with recombinant human bone morphogenetic protein-2 (rhBMP-2) used in transforaminal lumbar interbody fusion (TLIF). MethodsThis study was designed as a prospective, multi-center, double-blind method, randomized study. All randomized subjects underwent TLIF with DBM gel with rhBMP-2 group (40 patients) as an experimental group or DBM gel group (36 patients) as a control group. Post-operative observations were performed at 12, 24, and 48 weeks. The spinal fusion rate on computed tomography scans and X-rays films, Visual analog scale pain scores, Oswestry disability index and SF-36 quality of life (QOL) scores were used for the efficacy evaluation. The incidence rate of adverse device effects (ADEs) and serious adverse device effects (SADEs) were used for safety evaluation. ResultsThe spinal fusion rate at 12 weeks for the DBM gel with rhBMP-2 group was higher with 73.68% compared to 58.82% for the DBM gel group. The 24 and 48 weeks were 72.22% and 82.86% for the DBM gel with rhBMP-2 group and 78.79% and 78.13%, respectively, for the DBM gel group. However, there were no significant differences between two groups in the spinal fusion rate at 12, 24, and 48 weeks post-treatment (p=0.1817, p=0.5272, p=0.6247). There was no significant difference between the two groups in the incidence rate of ADEs (p=0.3836). For ADEs in the experimental group, ‘Pyrexia’ (5.00%) was the most common ADE, followed by ‘Hypesthesia’, ‘Paresthesia’, ‘Transient peripheral paralysis’, ‘Spondylitis’ and ‘Insomnia’ (2.50%, respectively). ADEs reported in control group included ‘Pyrexia’, ‘Chest discomfort’, ‘Pain’, ‘Osteoarthritis’, ‘Nephropathy toxic’, ‘Neurogenic bladder’, ‘Liver function analyses’ and ‘Urticaria’ (2.86%, respectively). There was no significant difference between the two groups in the incidence rate of SADEs (p=0.6594). For SADE in the experimental group, ‘‘Pyrexia’ and ‘Spondylitis’ were 2.50%. SADE reported in the control group included 'Chest discomfort’, ‘Osteoarthritis’ and ‘Neurogenic bladder’. All SADEs described above were resolved after medical treatment. ConclusionThis study demonstrated that the spinal fusion rates of DBM gel group and DBM gel with rhBMP-2 group were not significantly different. But, this study provides knowledge regarding the earlier postoperative effect of rhBMP-2 containing DBM gel and also supports the idea that the longer term follow-up results are essential to confirm the safety and effectiveness.

In vitro and in vivo evaluation of xenogeneic bone putty with the carrier of hydrogel derived from demineralized bone matrix.

The demineralized bone matrix (DBM) putty is a traditional bone graft utilized to facilitate the repair and reconstruction of bone. Recent studies indicated the DBM putties with the various carriers were different in bone repairing ability. In order to prepare a kind of DBM putty with a good biocompatibility and bioactivity, the DBM gel was processed from the DBM and the feasibility as a carrier for the DBM putty was evaluated. After the bovine DBM gel was prepared, the BMPs content as well as the ability to promote osteogenic differentiation of MC3T3-E1 cells in vitro were investigated. Then the DBM putty was prepared and filled into the rat calvarial defect model to evaluate the bone repairing ability by micro-CT and histology. The result showed there was 2.953 ± 0.054ng BMP contained in per gram of the DBM gel. And the ALP production of MC3T3-E1 cells in the DBM gels group increased with prolonged culturing, the mineralized nodules formed in MC3T3-E1 cells on 14th day after co-culture. The putty prepared by DBM gel was easy to handle without loss of DBM particles at room temperature. In the rat calvarial bone defect experiment, histological observation showed more mature bone formed in the DBM putty group than that in the type I collagen group at 12weeks, which indicated the bone putty prepared by DBM gel exhibited a better bone repair capability.

Ridge Preservation Using Demineralized Bone Matrix Gel With Recombinant Human Bone Morphogenetic Protein-2 After Tooth Extraction: A Randomized Controlled Clinical Trial

The aim of the present randomized controlled trial was to determine the safety and efficacy of injectable demineralized bone matrix (DBM) gel combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) on alveolar ridge preservation after tooth extraction. A total of 69 patients were randomly assigned to either a test group (n = 35) or a control group (n = 34). In the test group, DBM, together with rhBMP-2 (0.05 mg/mL; rhBMP-2/DBM) was transplanted into the extraction sockets. The control group received DBM alone. The safety of rhBMP-2/DBM was evaluated by oral examination, serum chemistry, and hematologic examination. The radiographic changes in alveolar bone height and width were measured using computed tomography scans performed immediately after transplant and again 3 months thereafter. Healing was uneventful in all subjects, with no anticipated adverse events and no clinically significant changes in the serum chemistry and hematologic findings. No meaningful immune response was found among the study groups. No significant difference was found in the radiographic changes of alveolar bone height and width (P > .05). This new injectable biomaterial can be used easily and safely in clinical applications.

Bone formation around zirconia implants combined with rhBMP‐2 gel in the canine mandible

The aim of this study was to estimate the effects of zirconia implants and recombinant human bone morphogenetic protein-2 (rhBMP-2) gel on the acceleration of local bone formation and osseointegration in the canine mandible. Four groups of 48 implants with identical geometry were installed in the mandibles of beagle dogs: alumina-blasted zirconia implants applied with rhBMP-2, alumina-blasted zirconia implants applied with demineralized bone matrix (DBM), alumina-blasted zirconia implants, and resorbable blast media-treated titanium (Ti) implants. For the first two groups, zirconia implants were inserted after the surgical sites were filled with rhBMP-2 or DBM gel. For the other two groups, zirconia or Ti implants were installed with no adjunctive treatment. Fluorescent bone markers were administered to monitor bone remodeling at weeks 2, 4, and 5 postimplantation. After healing periods of 3 weeks and 6 weeks, the animals were sacrificed, and fluorescent microscopy, histology, and histomorphometric analyses were performed. Fluorescent microscopy showed that bone formation around the zirconia implants installed with rhBMP-2 gel was the most prominent at 2 weeks postimplantation, while the Ti implants acquired bone apposition mainly at week 5. No significant differences were found in bone area among the groups (P > 0.05). The zirconia implants showed similar bone-to-implant contact to the Ti implants. There were no significant differences in bone-to-implant contact between the zirconia implants with rhBMP-2 gel and those with DBM (P > 0.05). The zirconia implants with alumina-blasted surfaces may achieve osseointegration in much the same manner as the well-established Ti implants. The area influenced by rhBMP-2 gel, including the alveolar crest, may cause active remodeling and early bone formation.

Response of osteoblast-like cells cultured on zirconia to bone morphogenetic protein-2

PurposeThe aim of this study was to compare osteoblast behavior on zirconia and titanium under conditions cultured with bone morphogenetic protein-2.MethodsMC3T3-E1 cells were cultured on sandblasted zirconia and sandblasted/etched titanium discs. At 24 hours after seeding MC3T3-E1, the demineralized bone matrix (DBM) gel alone and the DBM gel with bone morphogenetic protein-2 (BMP-2) were added to the culture medium. The surface topography was examined by confocal laser scanning microscopy. Cellular proliferation was measured at 1, 4, and 7 days after gel loading. Alkaline phosphatase activity was measured at 7 days after gel loading. The mRNA expression of ALPase, bone sialoprotein, type I collagen, runt-related transcription factor 2 (Runx-2), osteocalcin, and osterix were evaluated by real-time polymerase chain reaction at 4 days and 7 days.ResultsAt 1, 4, and 7 days after loading the DBM gel alone and the DBM gel with BMP-2, cellular proliferation on the zirconia and titanium discs was similar and that of the groups cultured with the DBM gel alone and the DBM gel with BMP-2 was not significantly different, except for titanium with BMP-2 gel. ALPase activity was higher in the cells cultured with BMP-2 than in the other groups, but there was no difference between the zirconia and titanium. In ALPase, bone sialoprotein, osteocalcin, Runx-2 and osterix gene expression, that of cells on zirconia or titanium with BMP-2 gel was much more highly increased than titanium without gel at day 7. The gene expression level of cells cultured on zirconia with BMP-2 was higher than that on titanium with BMP-2 at day 7.ConclusionsThe data in this study demonstrate that the osteoblastic cell attachment and proliferation of zirconia were comparable to those of titanium. With the stimulation of BMP-2, zirconia has a more pronounced effect on the proliferation and differentiation of the osteoblastic cells compared with titanium.

Effect of hyperbaric oxygen on demineralized bone matrix and biphasic calcium phosphate bone substitutes

The aim of this study was to assess the possible effect of hyperbaric oxygen (HBO) on the healing of critical-sized defects that were grafted with demineralized bone matrix (DBM) combined with Pluronic F127 (F127) to form a gel or putty, or a commercially available biphasic calcium phosphate (BCP), mixed either with blood or F127 to form a putty. Twenty New Zealand White rabbits were randomly divided into 2 groups of 10 animals each. Bilateral 15-mm calvarial defects were created in the parietal bones of each animal, resulting in 40 critical-sized defects. Group I defects were grafted with either DBM putty or DBM gel. Group II defects were grafted with either BCP or BCP putty. Five animals from each group received HBO treatment (100% oxygen, at 2.4 ATA) for 90 minutes per day 5 days a week for 4 weeks. The other 5 animals in each group served as a normobaric (NBO) controls, breathing only room air. All animals were humanely killed at 6 weeks. The calvariae were removed and analyzed by micro computed tomography (mCT) and histomorphometry. mCT analysis indicated a higher bone mineral content (BMC, P < .05), bone volume fraction (BVF; P < .001), and bone mineral density (BMD; P < .001) of the defects grafted with BCP rather than DBM. Furthermore, the voxels that were counted as bone had a higher tissue mineral density (TMD) in the BCP- than in the DBM-filled defects (P < .001). Histologically complete bony union over the defects was observed in all specimens. Histomorphometric analysis showed that DBM-filled defects had more new bone (P < .007) and marrow (P < .001), and reduced fibrous tissue compared with the BCP defects (P < .001) under NBO conditions. HBO treatment reduced the amount of fibrous tissue in BCP filled defects (P < .05), approaching levels similar to that in matching DBM-filled defects. HBO also resulted in a small but significant increase in new bone in DBM-grafted defects (P < .05). Use of DBM or BCP promoted healing in these critical-sized defects. Hyperbaric oxygen therapy resulted in a slight increase in new bone in DBM-grafted defects and much larger reduction in fibrous tissue and matching increases in marrow in BCP-grafted defects, possibly through increased promotion of angiogenesis.

Hydroxyl Groups in Demineralized Bone Matrix

Human demineralized bone matrix (DBM) containing bone morphogenetic proteins (BMPs) is naturally biocompatible and can be remodeled by patients’ own bone. The major shortcoming of many of the currently used DBM gel formulations is that they have a tendency to flow, particularly if there is continuous bleeding at the application site. In this study, the physicochemical properties of human DBM were examined to improve the efficiency of DBM formulations. DBM remarkably showed higher water absorption than nondemineralized bone powder after 150 min. Hydroxyl groups in DBM appeared in fourier transform infrared analysis, although hydroxyl band in nondemineralized bone powder was not observed. The results suggested that hydrogels such as CMC, hyaluronic acid, or poloxamer as carriers can be applied for injectable DBM products, such as gel or putty types.

Augmentation of demineralized bone matrix (DBM) mineralization by a synthetic growth factor mimetic

These studies evaluated whether F2A4-K-NS, a peptide mimetic of FGF-2, could augment ectopic bone production following the subcutaneous implant of human demineralized bone matrix (DBM). DBM was formulated into a gel with and without F2A4-K-NS, and injected subcutaneously into athymic rats. After 28 days the resultant tissue was excised and fixed. The tissue was examined with soft X-rays and microcomputerized tomography (micro-CT), and by histological methods. Inclusion of F2A4-K-NS with DBM resulted in an increased mineral deposition as determined by soft X-ray and micro-CT analysis and von Kossa staining. DBM-containing tissues showed extensive mineralization compared to the carrier alone, which was poorly mineralized. The mineralization was qualitatively and quantitatively the most extensive in the samples containing F2A4-K-NS plus DBM. Additionally, the highest amount of von Kossa staining for calcium was observed in tissues from animals that had received DBM plus F2A4-K-NS. In these studies, 100 ng of peptide per 0.2 mL of injectable DBM gel generated the most optimal results. The synthetic peptide F2A4-K-NS augmented DBM-induced ectopic mineralization in athymic animals.

Histomorphometric evaluation of bone regeneration using allogeneic and alloplastic bone substitutes

Purpose The purpose of this investigation was to assess bone regeneration in critical sized defects in the rabbit calvarium using allogeneic and alloplastic bone substitutes. Materials and Methods Thirty New Zealand White rabbits were divided into 3 groups of 10 animals each. Bilateral 15 mm × 17 mm calvarial defects were made in the parietal bones of each animal. Group 1 had demineralized bone matrix (DBM) gel placed in one defect, while the other defect was left unfilled and served as the control. Group 2 had one defect filled with calcium hydroxide (CaOH)-treated DBM gel and the other defect filled with DBM gel. Group 3, the calcium-phosphate cement group, had Norian CRS (Norian Corp, Cupertino, CA) placed on one side and Bone Source (Howmedica Leibinger, Dallas, TX) placed on the contralateral side. Five animals in each group were killed at 6 and 12 weeks. Data analysis included qualitative assessment of the calvarial specimens and radiographic evaluation. Histomorphometric analysis was used to quantify the amount of new bone within the defects. Results Histomorphometric analysis showed that DBM gel-treated defects had significantly more new bone at 12 weeks compared with all other groups. There was no significant difference between defects filled with CaOH-treated DBM gel and those filled with DBM gel at 12 weeks. In group 3, Norian CRS- and Bone Source-treated defects were not statistically different from the unfilled controls. Conclusion DBM gel was an effective allogeneic bone substitute that showed reliable osseous healing of critical size defects in the rabbit calvarium. The addition of CaOH to DBM gel did not significantly improve the bone regenerative capacity of the DBM gel. Both Norian CRS and Bone Source did not promote bone regeneration in this animal model.

The effect of demineralized bone matrix gel on bone ingrowth and fixation of porous implants

The presence of demineralized bone matrix (DBM) gel did not enhance or accelerate attachment strength or bone ingrowth and resulted in a significant decrease in implant interface attachment strength at 3 weeks. Hydroxyapatite (HA) coating resulted in significant increases in interface shear strength and bone ingrowth compared with non–HA-coated porous implants at all time periods. The HA-coated implants achieved greater attachment strength and bone ingrowth at earlier time periods and maintained greater attachment strength at long-term periods. The results of this study indicate that in the presence of a good bone–implant interference fit, there is no beneficial effect in applying DBM gel to a porous-coated or HA-coated porous implant surface. The small amount that can be applied and the degree of osteoinductivity of DBM seem to preclude it from having a significant biologic effect. Copyright 2002, Elsevier Science (USA). All rights reserved.

Instrumented posterolateral lumbar fusion using coralline hydroxyapatite with or without demineralized bone matrix, as an adjunct to autologous bone

Background context: Autogenous posterolateral fusion with and without instrumentation has been reported with good results. However, difficult-to-fuse patients, such as smokers, elderly patients with poor bone quality and/or quantity, or patients with prior posterior surgeries, may have somewhat lower fusion rates. Purpose: To determine the efficacy of coralline hydroxyapatite with or without demineralized bone matrix as a bone graft extender in a human clinical model with long-term follow-up. Study design/setting: A retrospective series of 40 patients undergoing instrumented autogenous posterolateral lumbar fusion augmented with coralline hydroxyapatite with or without demineralized bone matrix. Patient sample: Long-term clinical and radiographic follow-up were examined for 40 patients who underwent an instrumented posterolateral fusion only. Patients undergoing anterior lumbar interbody fusion (ALIF) procedures were not considered part of the sample. Methods: All patients underwent successful transpedicular fixation with autogenous posterolateral lumbar fusion. Fifteen cc of Pro Osteon™ 500 coralline hydroxyapatite (Interpore Cross International, Irvine, CA) was used at each level. An additional 10 cc of Grafton demineralized bone matrix gel (Osteotech, Eatontown, NJ) was used in 70% of these patients. Results: An overall fusion rate of 92.5% was achieved. Pain and function improvement were good but somewhat age dependent and correlated with the number of comorbidities. Patients with Grafton DBM gel had a lower fusion rate of 89.3%. Conclusions: Based on this small retrospective review, coralline hydroxyapatite is an effective bone graft extender in difficult-to-fuse patients as an adjunct to autologous bone for posterolateral fusion of the lumbar spine when combined with rigid instrumentation.

Experimental posterolateral lumbar spinal fusion with a demineralized bone matrix gel.

A controlled rabbit model of lumbar posterolateral intertransverse process arthrodesis was used to evaluate a bone graft substitute. To determine the efficacy of demineralized bone matrix gel as an autograft extender, using different ratios of demineralized bone matrix to autograft and to determine the efficacy of demineralized bone matrix as an autogenous bone graft enhancer by adding it to the usual quantity of autograft. Autogenous bone is considered the most effective bone graft material for posterolateral lumbar arthrodesis, yet nonunions occur in up to 30% of patients. In addition, donor site complications may occur in 25-30% of patients. This has prompted the search for and investigation of bone graft extenders, enhancers, and substitutes. Commercially available demineralized bone matrix gel is one possible graft extender and enhancer, which, unlike mineralized allografts, has osteoinductive properties. Although the gel is in common use, the efficacy of demineralized bone matrix when used for posterolateral spine arthrodesis has not been examined in prospective clinical studies. Furthermore, no known animal studies have tested demineralized bone matrix gel in a posterolateral arthrodesis model. Forty-seven New Zealand white rabbits underwent bilateral posterolateral spine arthrodesis at L5-L6 using autogenous iliac crest bone graft alone or in combination with demineralized bone matrix. Four groups were formed on the basis of the ratio of autograft to demineralized bone matrix: autograft alone (3 mL), 100:0 group; autograft (3 mL) and demineralized bone matrix (1.5 mL), 100:50 group; autograft (1.5 mL) and demineralized bone matrix (1.5 mL), 50:50 group; and autograft (0.75 mL) and demineralized bone matrix (2.25 mL), 25:75 group. Rabbits were killed 6 weeks after surgery. Inspection, manual palpation, radiographic film, and histologic evaluation were used to assess fusion. All groups had similar fusion rates (66-73%) based on manual palpation. Rabbits implanted with demineralized bone matrix had more mature fusion masses, evidenced by the greater trabecular bone formation seen on radiographic film and histologic study. Demineralized bone matrix was effective as a graft extender when used in up to a 3:1 ratio with autograft in a rabbit posterolateral spine fusion model. When less than the standard volume of autograft was used, the addition of demineralized bone matrix gel lead to fusion success rates comparable to those of the standard amount of autograft alone. However, demineralized bone matrix did not increase the frequency of successful fusion when added to the standard amount of autograft.

Induction of bone by a demineralized bone matrix gel: A study in a rat femoral defect model

Demineralized bone matrix contains osteoinductive factors and stimulates filling of gaps and defects with bone; however, it is difficult to handle by itself and various preparations have been tested. Demineralized bone matrix with a gel consistency now is available for clinical use. We studied, in a femoral segment defect in the rat, the effects of rat demineralized bone matrix gel with and without a ceramic substratum. This preparation is analogous to the human demineralized bone matrix in the same carrier, used clinically for humans. One hundred adult male Fischer rats were divided into 10 experimental groups. Independent variables included the presence or absence of hydroxyapatite ceramic cylinders, the presence of demineralized bone matrix in carrier or carrier alone (glycerol), and the duration of observation (1, 2, and 4 months). Defects filled with the gel alone had significantly higher radiographic scores for host-graft union at 4 months compared with ceramic with the gel, ceramic alone, or carrier alone. Demineralized bone matrix gel significantly increased the total histologic score for host-graft union, whether ceramic was present or not, and a three-way interaction occurred among ceramic, the gel, and time. Demineralized bone matrix gel was an effective inducer of bone formation in this model. An additional substratum was not required; in fact, significantly more bone was formed in the absence of the ceramic cylinder. Neither the gel nor the ceramic were impediments to revascularization of the defect. Host-graft union was enhanced by demineralized bone matrix gel but not by the ceramic cylinder.

Osteoinduction within PEO/PBT copolymer implants in cranial defects using demineralized bone matrix

This study was undertaken to assess the osteoinductive effect addition of demineralized bone matrix (DBM) gel has, on the behaviour of osteoconductive bone-bonding PEO/PBT copolymer (PolyactiveR) implants. Cranial defects in rats were filled with these composites to study bone formation in comparison with several controls after 2 and 8 weeks survival time. Osteogenesis was qualitatively evaluated by using light- and transmission electron microscopy as well as backscatter electron imaging. Quantification of the amount of bone ingrowth was performed by using a computerized image analysis system. Initially, rapid calcification was observed in the polymer and DBM, followed by formation of new trabecular bone around the demineralized bone fragments. Bone ingrowth in implants consisting of plain copolymer was less than expected based on previous research, but the addition of demineralized bone matrix gel resulted in a significantly greater amount of new bone formation in the defects. We concluded that the application of DBM-gel to PolyactiveR implants had a beneficial effect on the amount of new bone formation in this material. This procedure combines the osteoinductive potential of DBM with the mechanical and bone-bonding properties of a copolymer, thus opening the way to the development of a line of osteoactive composite implants with good surgical handling properties.

Demineralized bone matrix. Enhancement of spinal fusion.

A study was conducted to determine the ability of demineralized bone matrix gel to act as an osteoconductive/osteoinductive material to enhance canine spinal fusion. Seven dogs underwent posterior spinal fusion. Four-level fusions were performed with one of four procedures at each level: decortication alone, with gel added, with autograft, or with both gel and autograft. Dogs were killed at 6 weeks and early histologic response was studied. At untreated control sites, little bone formation was evident. Gel-filled sites showed abundant osteoid, with 60% of demineralized particles fused to or surrounded by new bone. Sites filled with autograft had more new bone, but there was more osteoid at gel-treated sites. Autograft augmented with gel showed the most vigorous response, with extensive bridging between demineralized particles, host bone, autograft, and new bone. Significantly less autograft was needed to induce a similar amount of new bone formation when gel was added. Use of the gel as an autograft extender may improve the chance for successful spinal fusion.