Degree Of Hydroxylation Research Articles

Preparation and Characterization of Hydroxylated Recombinant Collagen by Incorporating Proline and Hydroxyproline in Proline-Deficient Escherichia coli.

Collagen possesses distinctive chemical properties and biological functions due to its unique triple helix structure. However, recombinant collagen expressed in Escherichia coli without post-translational modifications such as hydroxylation lacks full function since hydroxylation is considered to be critical to the stability of the collagen triple-helix at body temperature. Here, a proline-deficient E. coli strain was constructed and employed to prepare hydroxylated recombinant collagens by incorporating proline (Pro) and hydroxyproline (Hyp) from the culture medium. By controlling the ratio of Pro to Hyp in the culture medium, collagen with different degrees of hydroxylation (0-88%) can be obtained. When the ratio of Pro and Hyp was adjusted to 12:8 mM, the proline hydroxylation rate of recombinant human collagen (rhCol, 55 kDa) ranged from 40-50%, which was also the degree of natural collagen. After proline hydroxylation, both the thermal stability and cell binding of rhCol were significantly enhanced. Notably, when the hydroxylation rate approached that of native human collagen (40-50%), the improvements were most pronounced. Moreover, the cell binding of rhCol with a hydroxylation rate of 43% increased by 29%, and the melting temperature (Tm) rose by 5 °C compared to the non-hydroxylated rhCol. The system achieved a yield of 1.186 g/L of rhCol by batch-fed in a 7 L fermenter. This innovative technology is expected to drive the development and application of collagen-related biomaterials with significant application value in the fields of tissue engineering, regenerative medicine, and biopharmaceuticals.

Structural properties and mechanical responses of geopolymer pore models under chloride exposure: Molecular dynamics simulation

Geopolymers are aluminosilicate materials and are an environmentally friendly alternative to Portland cement. However, the presence of nanoscale gel pores in geopolymers can affect their structural properties. At the molecular level, the main component of the geopolymer is sodium aluminosilicate hydrate (NASH). Therefore, this study uses molecular dynamics simulations to investigate the impact of various NaCl concentrations on NASH pore structures, revealing significant ion interaction mechanisms. The results showed that as the NaCl concentration increased, the adsorption rate of Na+ ions on the NASH surface increased and Cl− ions diffused together with the Na+ ions. Besides, the presence of NaCl had little effect on the elastic modulus and ultimate strength of NASH, but the ability of the model to resist deformation varied with different degrees of hydroxylation in the model. This article offers a nanoscopic explanation of geopolymer performance in a chloride environment, facilitating enhancements in the optimal design of materials.

DFT study on Mo-stabilized passive films: Hydroxylation effects on chromium and iron oxide surfaces

Hydrous Cr2O3 and Fe2O3 surfaces without and with substitutional molybdenum were simulated by DFT modelling to investigate at the atomic scale the role of Mo in improving the corrosion resistance of passive films on stainless steels. The surface structures most energetically favoured were determined in the conditions of interest. For surfaces with a high degree of hydroxylation, the preferential location of substitutional Mo is just under the hydroxyl groups, in agreement with the experimental observations. The substitution by Mo is exothermic and Mo preferentially substitutes in Fe- than in Cr-rich zone of the inner barrier layer of passive films.

Water Adsorption on π-Surfaces of Open-Fullerenes.

Understanding the water adsorptive behavior of fullerenes is of particular importance for their material application in aqueous media. The conventional fullerenols usually provide complex physical pictures of water adsorption due to their uncontrollable hydroxylation degree and substitution pattern. Herein, we focus on poorly hydroxylated fullerenes with well-defined structures. The water adsorptive behavior was examined by synchrotron IR spectroscopy and computational studies. As a result, three types of IR bands were observed for adsorbed water. The population of the three states was considerably altered by the orientational difference of the hydroxy groups. Nevertheless, water adsorption could not occur for 9-fluorenol and catechol. This indicates that the Lewis acidic fullerene π-surface plays a prominent role in water adsorption, while the rather Lewis basic π-surface of 9-fluorenol is unable to attract much water at a boundary with humid air.

New Features of Laboratory-Generated EPFRs from 1,2-Dichlorobenzene (DCB) and 2-Monochlorophenol (MCP).

The present research is primarily focused on investigating the characteristics of environmentally persistent free radicals (EPFRs) generated from commonly recognized aromatic precursors, namely, 1,2-dichlorobenzene (DCB) and 2-monochlorophenol (MCP), within controlled laboratory conditions at a temperature of 230 °C, termed as DCB230 and MCP230 EPFRs, respectively. An intriguing observation has emerged during the creation of EPFRs from MCP and DCB utilizing a catalyst 5% CuO/SiO2, which was prepared through various methods. A previously proposed mechanism, advanced by Dellinger and colleagues (a conventional model), postulated a positive correlation between the degree of hydroxylation on the catalyst's surface (higher hydroxylated, HH and less hydroxylated, LH) and the anticipated EPFR yields. In the present study, this correlation was specifically confirmed for the DCB precursor. Particularly, it was observed that increasing the degree of hydroxylation at the catalyst's surface resulted in a greater yield of EPFRs for DCB230. The unexpected finding was the indifferent behavior of MCP230 EPFRs to the surface morphology of the catalyst, i.e., no matter whether copper oxide nanoparticles are distributed densely, sparsely, or completely agglomerated. The yields of MCP230 EPFRs remained consistent regardless of the catalyst type or preparation protocol. Although current experimental results confirm the early model for the generation of DCB EPFRs (i.e., the higher the hydroxylation is, the higher the yield of EPFRs), it is of utmost importance to closely explore the heterogeneous alternative mechanism(s) responsible for generating MCP230 EPFRs, which may run parallel to the conventional model. In this study, detailed spectral analysis was conducted using the EPR technique to examine the nature of DCB230 EPFRs and the aging phenomenon of DCB230 EPFRs while they exist as surface-bound o-semiquinone radicals (o-SQ) on copper sites. Various aspects concerning bound radicals were explored, including the hydrogen-bonding tendencies of o-semiquinone (o-SQ) radicals, the potential reversibility of hydroxylation processes occurring on the catalyst's surface, and the analysis of selected EPR spectra using EasySpin MATLAB. Furthermore, alternative routes for EPFR generation were thoroughly discussed and compared with the conventional model.

Tuning electronic levels in photoactive hydroxylated titania nanosystems: combining the ligand dipole effect and quantum confinement.

Reducing the size of titania (TiO2) to the nanoscale promotes the photoactive anatase phase for use in a range of applications from industrial catalysis to environment remediation. The nanoscale dimensions of these systems affect the magnitude of the electronic energy gap by quantum confinement. Upon interaction with aqueous environments or water vapour, the surfaces of these systems will also be hydroxylated to some degree. In turn, this affects the electronic energy levels due to the cumulative electrostatic effect of the dipolar hydroxyl (-OH) ligands (i.e. the ligand dipole effect). Using accurate density functional calculations, we investigate the combined effects of quantum confinement and the hydration-induced ligand dipole effect on a set of realistic titania nanosystems over a wide range of hydroxylation. Our detailed investigation reveals that, contrary to previous models, the ligand dipole effect does not-linearly depend on the ligand coverage due to the formation of inter-ligand OH⋯OH hydrogen bonds. To account for the resulting effects, we propose a refined model, which describes the ligand dipole effect more accurately in our systems. We show that both hydroxylation (by the ligand dipole effect) and size (by quantum confinement) have significant but distinct impacts on the electronic energy levels in nanotitania. As an example, we discuss how variations in these effects can be used to tune the highest unoccupied energy level in nanotitania for enhancing the efficiency of the hydrogen evolution reaction. Overall, we show that any specific energy shift can be achieved by a range of different combinations of nanosystem size and degree of hydroxylation, thus providing options for energy-level tuning while also allowing consideration of practical constraints (e.g. synthetic limitations, operating conditions) for photochemical applications.

Effects of cosolvents on CO2 displacement of shale oil and carbon storage

Molecular dynamics method was used to establish composite wall/inorganic nanopores of three pore sizes, three shale oil systems, five CO2-cosolvent systems, and pure CO2 system. The process of CO2-cosolvent displacement of crude oil in shale nanopores and carbon storage was simulated and the influencing factors of displacement and storage were analyzed. It is shown that the attraction of the quartz wall to shale oil increases with the degree of hydroxylation. The higher the degree of quartz hydroxylation, the more difficult it is to extract the polar components of shale oil. Nanopore size also has a great impact on shale oil displacement efficiency. The larger the pore size, the higher the shale oil displacement efficiency. The closer the cosolvent molecules are to the polarity of the shale oil, the higher the mutual solubility of CO2 and shale oil. The more the non-polar components of shale oil, the lower the mutual solubility of CO2 and shale oil with highly polar cosolvent. Ethyl acetate is more effective in stripping relatively high polar shale oil, while dimethyl ether is more effective in stripping relatively low polar shale oil. Kerogen is highly adsorptive, especially to CO2. The CO2 inside the kerogen is not easy to diffuse and leak, thus allowing for a stable carbon storage. The highest CO2 storage rate is observed when dimethyl ether is used as a cosolvent, and the best storage stability is observed when ethyl acetate is used as a cosolvent.

Study on the Biomolecular Competitive Mechanism of Polybrominated Diphenyl Ethers and Their Derivatives on Thyroid Hormones.

Polybrominated diphenyl ethers (PBDEs) are widely used brominated flame retardants. PBDEs and their derivatives, hydroxylated PBDEs (OH-PBDEs), can bind to hormone receptors and impact hormone secretion, transportation, and metabolism, leading to endocrine disruption and the development of various diseases. They have particularly strong interference effects on thyroid hormones. This study used decabromodiphenyl ether (BDE-209); 2,2',4,4'-tetrabromodiphenyl ether (BDE-47); and 6-OH-BDE-47 as representative compounds of PBDEs and their derivatives, OH-PBDEs. A fluorescence probe, fluorescein-isothiocyanate-L-thyroxine (FITC-T4, F-T4), specific for binding to transthyretin (TTR), a thyroid transport protein, was prepared. The binding capacity of PBDEs and their derivatives, OH-PBDEs, to TTR was quantitatively measured using fluorescence spectroscopy. The principle of quenching the fluorescence intensity of F-T4 after binding to TTR was used to analyze the competitive interaction between the probe and BDE-209, BDE-47, and 6-OH-BDE-47, thereby evaluating the toxic effects of PBDEs and their derivatives on the thyroid system. Additionally, AutoDock molecular docking software (1.5.6) was used to further analyze the interference mechanism of OH-PBDEs on T4. The results of the study are as follows: (1) Different types of PBDEs and OH-PBDEs exhibit varying degrees of interference with T4. Both the degree of bromination and hydroxylation affect their ability to competitively bind to TTR. Higher bromination and hydroxylation degrees result in stronger competitive substitution. (2) The competitive substitution ability of the same disruptor varies at different concentrations. Higher concentrations lead to stronger substitution ability, but there is a threshold beyond which the substitution ability no longer increases. (3) When OH-PBDEs have four or more bromine atoms and exhibit the most structural similarity to T4, their binding affinity to TTR is stronger than that of T4.

Polyphenols Cause Structure Dependent Effects on the Metabolic Profile of Human Hepatocarcinogenic Cells.

Although many beneficial health effects are attributed to polyphenols their influence on the human metabolome has not been elucidated yet. The ubiquitous occurrence of polyphenols in the human diet demands comprehensive knowledge about physiological and toxicological effects of these compounds on human cells. The human hepatocarcinogenic cell line HepG2 is used to elucidate the effects of 13 polyphenols and three respective phenolic degradation products on the human metabolome using HPLC-MS/MS. To investigate structure-activity-relationships, structurally related examples of polyphenols from different compound classes are selected. The analysis of catechins points toward a relation between the degree of hydroxylation and the extent of metabolic effects particularly on the urea cycle and the pentose phosphate pathway (PPP). A correlation between the modulation of the PPP and the stability of the compounds is demonstrated, which may be caused by reactive oxygen species (ROS). The incubation of flavones and alkenylbenzenes demonstrates reduced activity of methoxylated compounds and no impact of the B-ring position. In general, polyphenols induce a multitude of metabolic effects, for example, on energy metabolism, PPP, and urea cycle. These metabolic alterations may be related to the widely reported bioactivity of these compounds such as the anticarcinogenic effects.

Emergence of Nano-Based Formulations for Effective Delivery of Flavonoids against Topical Infectious Disorders.

Flavonoids are hydroxylated phenolic substances in vegetables, fruits, flowers, seeds, wine, tea, nuts, propolis, and honey. They belong to a versatile category of natural polyphenolic compounds. Their biological function depends on various factors such as their chemical structure, degree of hydroxylation, degree of polymerization conjugation, and substitutions. Flavonoids have gained considerable attention among researchers, as they show a wide range of pharmacological activities, including coronary heart disease prevention, antioxidative, hepatoprotective, anti-inflammatory, free-radical scavenging, anticancer, and anti-atherosclerotic activities. Plants synthesize flavonoid compounds in response to pathogen attacks, and these compounds exhibit potent antimicrobial (antibacterial, antifungal, and antiviral) activity against a wide range of pathogenic microorganisms. However, certain antibacterial flavonoids have the ability to selectively target the cell wall of bacteria and inhibit virulence factors, including biofilm formation. Moreover, some flavonoids are known to reverse antibiotic resistance and enhance the efficacy of existing antibiotic drugs. However, due to their poor solubility in water, flavonoids have limited oral bioavailability. They are quickly metabolized in the gastrointestinal region, which limits their ability to prevent and treat various disorders. The integration of flavonoids into nanomedicine constitutes a viable strategy for achieving efficient cutaneous delivery owing to their favorable encapsulation capacity and diminished toxicity. The utilization of nanoparticles or nanoformulations facilitates drug delivery by targeting the drug to the specific site of action and exhibits excellent physicochemical stability.

Preparation of Antioxidative MXene by Deep Eutectic Solvent-Assisted Electrochemical Ultrasonic Composite Exfoliation and Its Application in Flexible Solid-State Supercapacitors

In this work, we achieved a novel preparation of Ti3C2 MXene (MXene–DES) with few layers and a high degree of hydroxylation by a deep eutectic solvent (DES)-assisted electrochemical ultrasonic composite exfoliation method which is easy to scale up. The electrochemical process used a mixture of low-cost DES (choline chloride–urea) and water as the electrolyte, in which DES acts as a triple role of intercalation, interlayer expansion, and anti-oxidation. DES attached to the surface and interlayer of layered Ti3C2 formed an antioxidative protective cover, resulting in the layered Ti3C2 being grafted with hydroxyl functional groups instead of forming TiO2 in water during the entire exfoliation process. The prepared MXene–DES exhibits fewer layers, larger interlayer spacing, higher degree of hydroxylation, and stronger oxidation resistance than the MXene prepared by traditional ultrasound in a nitrogen atmosphere (MXene–N2). The symmetric flexible solid-state supercapacitor based on an activated carbon electrode and the composite gel polymer electrolyte composed of MXene–DES, DES, and polyvinyl alcohol exhibits good mechanical properties, a wide voltage window of 2.3 V, and a high specific capacitance of 133.7 F·g–1 (0.1 A·g–1). Our strategy paved a simple, low-cost, and relatively environmentally friendly way to the scalable preparation and application of antioxidative high-quality MXene.

New Atomistic Insights on the Chemical Mechanical Polishing of Silica Glass with Ceria Nanoparticles.

Reactive molecular dynamics simulations have been used to simulate the chemical mechanical polishing (CMP) process of silica glass surfaces with the ceria (111) and (100) surfaces, which are predominantly found in ceria nanoparticles. Since it is known that an alteration layer is formed at the glass surface as a consequence of the chemical interactions with the slurry solutions used for polishing, we have created several glass surface models with different degrees of hydroxylation and porosity for investigating their morphology and chemistry after the interaction with acidic, neutral, and basic water solutions and the ceria surfaces. Both the chemical and mechanical effects under different pressure and temperature conditions have been studied and clarified. According to the simulation results, we have found that the silica slab with a higher degree of hydroxylation (thicker alteration layer) is more reactive, suggesting that proper chemical treatment is fundamental to augment the polishing efficiency. The reactivity between the silica and ceria (111) surfaces is higher at neutral pH since more OH groups present at the two surfaces increased the Si-O-Ce bonds formed at the interface. Usually, an outermost tetrahedral silicate unit connected to the rest of the silicate network through a single bond was removed during the polishing simulations. We observed that higher pressure and temperature accelerated the removal of more SiO4 units. However, excessively high pressure was found to be detrimental since the heterogeneous detachment of SiO4 units led to rougher surfaces and breakage of the Si-O-Si bond, even in the bulk of the glass. Despite the lower concentration of Ce ions at the surface resulting in the lower amount of Si-O-Ce formed, the (100) ceria surface was intrinsically more reactive than (111). The different atomic-scale mechanisms of silica removal at the two ceria surfaces were described and discussed.

Homopolymeric Protein Phosphors: Overpassing the Stability Frontier of Deep‐Red Bio‐Hybrid Light‐Emitting Diodes

AbstractAlthough protein‐polymer phosphors are an emerging photon‐management filter concept for hybrid light‐emitting diodes, deep‐red‐emitting devices based on archetypal fluorescent proteins (FPs; mCherry) are still poorly performing with lifetimes <50 h under high photon‐flux excitation and ambient conditions. Here, the challenge is two‐fold: i) understanding the deactivation mechanism of red‐emitting FP‐polymer coatings and, in turn, ii) identifying the best polymer design for highly stable devices. This study first provides comprehensive photophysical/thermal/structural studies and device degradation (ambient/inert) analysis, revealing the presence of photo‐induced cis–trans isomerization and the effect of oxygen and water on the deactivation of mCherry in reference polymer coatings. Based on these findings, a new bio‐phosphor configuration using polyvinyl alcohol derivatives, in which crystallinity and amount of trapped water (stiffness and oxygen/moisture barriers) are easily controlled by the hydroxylation degree, is successfully achieved. Compared to the prior art, these devices significantly outperform the reference stability (>50‐fold enhancement), showing a brightness loss of <5% over the first 2000 h and a final device lifetime of 2600 h. Hence, this study describes a unique rationale toward designing polymers to stabilize FPs for lighting, overpassing stability frontiers in deep‐red hybrid light‐emitting diodes (HLEDs) going from hours to months.

The Degree of Hydroxylation of Phenolic Rings Determines the Ability of Flavonoids and Stilbenes to Inhibit Calcium-Mediated Membrane Fusion

This paper discusses the possibility of using plant polyphenols as viral fusion inhibitors with a lipid-mediated mechanism of action. The studied agents are promising candidates for the role of antiviral compounds due to their high lipophilicity, low toxicity, bioavailability, and relative cheapness. Fluorimetry of calcein release at the calcium-mediated fusion of liposomes, composed of a ternary mixture of dioleoyl phosphatidylcholine, dioleoyl phosphatidylglycerol, and cholesterol, in the presence of 4'-hydroxychalcone, cardamonin, isoliquiritigenin, phloretin, resveratrol, piceatannol, daidzein, biochanin A, genistein, genistin, liquiritigenin, naringenin, catechin, taxifolin, and honokiol, was performed. It was found that piceatannol significantly inhibited the calcium-induced fusion of negatively charged vesicles, while taxifolin and catechin showed medium and low antifusogenic activity, respectively. As a rule, polyphenols containing at least two OH-groups in both phenolic rings were able to inhibit the calcium-mediated fusion of liposomes. In addition, there was a correlation between the ability of the tested compounds to inhibit vesicle fusions and to perturb lipid packing. We suggest that the antifusogenic action of polyphenols was determined by the depth of immersion and the orientation of the molecules in the membrane.

Hydroxylation Studies on High-Solid Load Magnesia Aqueous Suspensions

The magnesia (MgO) hydroxylation behavior in dilute suspensions (below 50% volumetric solid loads) has been extensively studied over the past decades due to its role in refractory castables. However, its equivalent effects on concentrated systems have not been analyzed in such a systemic way, although they are known to be as or more deleterious than those observed in dilute systems. This study focuses on the hydroxylation behavior of different sources of magnesia (sinter and caustic magnesia) in aqueous suspensions prepared at various solids concentrations (17-96 vol%) and shaped by distinct methods. They were analyzed by thermogravimetry, apparent volumetric expansion measurements, X-ray diffraction, scanning electron microscopy, and in situ temperature measurements during curing. The ratio between experimental and theoretical extents of the hydroxylation degree resulted in the reaction yield. A comparison between samples containing the same water amount revealed those with caustic magnesia showed a faster evolution of hydroxylation degree, apparent volumetric expansion, and higher maximum internal temperature during curing. In both systems, the yield levels of compositions of heavier solid loads were higher, despite the small quantity of hydroxylation products formed. Significant differences in the products’ microstructure were observed and related to the ions' mobility toward crystallization nuclei.

Collagen Type II—Chitosan Interactions as Dependent on Hydroxylation and Acetylation Inferred from Molecular Dynamics Simulations

Chitosan-collagen blends have been widely applied in tissue engineering, joints diseases treatment, and many other biomedical fields. Understanding the affinity between chitosan and collagen type II is particularly relevant in the context of mechanical properties modulation, which is closely associated with designing biomaterials suitable for cartilage and synovial fluid regeneration. However, many structural features influence chitosan's affinity for collagen. One of the most important ones is the deacetylation degree (DD) in chitosan and the hydroxylation degree (HD) of proline (PRO) moieties in collagen. In this paper, combinations of both factors were analyzed using a very efficient molecular dynamics approach. It was found that DD and HD modifications significantly affect the structural features of the complex related to considered types of interactions, namely hydrogen bonds, hydrophobic, and ionic contacts. In the case of hydrogen bonds both direct and indirect (water bridges) contacts were examined. In case of the most collagen analogues, a very good correlation between binding free energy and DD was observed.

Surface Properties and Antioxidant Activity of Silicate and Borosilicate Bioactive Glasses

Herein, silicate and borosilicate bioactive glasses are synthetized and characterized. The antioxidant activity, in the presence and absence of human osteoblasts’ progenitor cells, of the different glass compositions, is correlated to the surface properties: wettability, zeta potential, hydroxylation degree, reactivity in simulated body fluid (SBF), and Tris buffer. An enhancing effect of boron in glass reactivity and a stabilizing role of Sr and Mg are evidenced. The scavenging potential of the analyzed bioactive glasses toward reactive oxygen species (ROS) is clearly proved. Moreover, cellular tests confirm the protective effect of the bioactive glasses toward viable cells acting as ROS/RNS species scavenger. The obtained results represent an original improvement of the knowledge concerning the intrinsic antioxidant ability of bioactive glasses with different compositions and the mechanisms involved.

Expanding the Ajudazol Cytotoxin Scaffold: Insights from Genome Mining, Biosynthetic Investigations, and Novel Derivatives.

Myxobacteria have proven to be a rich source of natural products, but their biosynthetic potential seems to be underexplored given the high number of biosynthetic gene clusters present in their genomes. In this study, a truncated ajudazol biosynthetic gene cluster in Cystobacter sp. SBCb004 was identified using mutagenesis and metabolomics analyses and a set of novel ajudazols (named ajudazols C-J, 3-10, respectively) were detected and subsequently isolated. Their structures were elucidated using comprehensive HR-MS and NMR spectroscopy. Unlike the known ajudazols A (1) and B (2), which utilize acetyl-CoA as the biosynthetic starter unit, these novel ajudazols were proposed to incorporate 3,3-dimethylacrylyl CoA as the starter. Ajudazols C-J (3-10, respectively) are characterized by varying degrees of hydroxylation, desaturation, and different glycosylation patterns. Two P450-dependent enzymes and one glycosyltransferase are shown to be responsible for the hydroxylation at C-8, the desaturation at C-15 and C-33, and the transfer of a d-β-glucopyranose, respectively, based on mutagenesis results. One of the cytochrome P450-dependent enzymes and the glycosyltransferase were found to be encoded by genes located outside the biosynthetic gene cluster. Ajudazols C-H (3-8, respectively) exhibit cytotoxicity against various cancer cell lines.

Stabilizing Oxide Nanolayer via Interface Confinement and Surface Hydroxylation.

Surface hydroxylation over oxide catalysts often occurs in many catalytic processes involving H2 and H2O, which is considered to play an important role in elementary steps of the reactions. Here, monolayer CoO and CoOHx nanoislands on Pt(111) are used as inverse model catalysts to study the effect of surface hydroxylation on the stability of Co oxide overlayers in O2. Surface science experiments indicate that hydroxyl groups formed on CoO nanoislands produced by deuterium-spillover can enhance oxidation resistance of the Co oxide nanostructures. Theoretical calculation shows that the interfacial adhesion between CoO and Pt is linearly strengthened with the increasing hydroxylation degree of CoO surface. Thus, the interface confinement effect between CoO and Pt can be enhanced by the surface hydroxylation due to the more reduced Co ions and stronger Co-Pt bonding at the CoOHx/Pt interface.

Advanced characterization of albumin adsorption on a chemically treated surface for osseointegration: An innovative experimental approach

Surface chemistry, charge, wettability, and roughness affect the adsorbed protein layer, influencing biocompatibility and functionality of implants. Material engineering seeks innovative, sensitive, and reliable characterization techniques for study the adsorbed proteins. These techniques must be suitable to be directly used on the surfaces of clinical interest. In this paper, the characterization of surfaces with topography and chemistry developed for osseointegration is performed by innovative surface analysis techniques to investigate the properties of adsorbed bovine serum albumin. Ti6Al4V alloy chemically treated with an oxidative process to obtain peculiar surface features (roughness and surface hydroxylation) was tested and compared with mirror-polished titanium. Albumin forms a continuous layer on both Ti surfaces when adsorbed from near physiological concentrations, as proved by Kelvin force probe microscopy. It was observed that the hydroxylation degree plays a pivotal role in determining the conformation of proteins after adsorption, where it strongly drives protein unfolding, as confirmed by Surface Enhanced Raman scattering, and in influencing the mechanism and chemical stability of protein-surface interactions, which was highlighted by zeta potential titration curves.