Deep Ultraviolet Light-emitting Diodes Research Articles

Enhancement of Light Efficiency of Deep-Ultraviolet Light-Emitting Diodes by Encapsulation with a 3D Photonic Crystal Reflecting Layer.

Recently, UVC LEDs, which emit deep ultraviolet light, have found extensive applications across various fields. This study demonstrates the design and implementation of thin films of three-dimensional photonic crystals (3D PhCs) as reflectors to enhance the light output power (LOP) of UVC LEDs. The 3D PhC reflectors were prepared using the self-assembly of silica nanospheres on a UVC LED lead frame substrate via the evaporation-induced method (side) and the gravitational sedimentation method (bottom), respectively. These PhCs with the (111) crystallographic plane were deposited on the side wall and bottom of the UVC LED lead frame, acting as functional materials to reflect UVC light. The LOP of UVC LEDs with 3D PhC reflectors at a driving current of 100 mA reached 19.6 mW. This represented a 30% enhancement compared to commercial UVC LEDs with Au-plated reflectors, due to the UVC light reflection by the photonic band gaps of 3D PhCs in the (111) crystallographic plane. Furthermore, after aging tests at 60 °C and 60% relative humidity for 1000 h, the relative LOP of UVC LEDs with 3D PhC reflectors decreased by 7%, which is better than that of commercial UVC LEDs. Thus, this study offers potential methods for enhancing the light output efficiency of commercial UVC light-emitting devices.

Effects of Electron Blocking Layer Thickness on the Electrical and Optical Properties of AlGaN-Based Deep-Ultraviolet Light-Emitting Diode

Effects of Electron Blocking Layer Thickness on the Electrical and Optical Properties of AlGaN-Based Deep-Ultraviolet Light-Emitting Diode

Effect of Growth Temperature on Strain during Growth and Crack Suppression in AlGaN Templates on Sapphire Substrates for Deep Ultraviolet Light‐Emitting Diodes

The crack formations in AlGaN templates for deep ultraviolet (DUV) light‐emitting diodes (LEDs) are investigated and successfully suppressed. The strain values in AlGaN thick layers on sapphire substrates by in situ wafer curvature measurements and ex situ X‐ray diffraction measurements are evaluated. It is found that the tensile strain during the AlGaN thick layer growth comes from a thermal expansion difference between the AlGaN thick layer and the sapphire substrate as the temperature changes from the AlN nucleation layer growth to the AlGaN thick layer growth. When the temperature change is 100 °C and less, the tensile strain of 0.1% and less is observed during the AlGaN thick layer growth, resulting in no crack formations in the AlGaN thick layer. Furthermore, a DUV LED layer structure grown on such a crack‐free AlGaN template shows no crack formations. Thus, to suppress crack formation in templates fabricated for DUV LEDs, their growth temperature must be optimized by considering thermal expansions caused by the changes in the growth temperature from the nucleation layer to the thick layer.

On the origin of the enhanced light extraction efficiency of DUV LED by using inclined sidewalls.

It is known that light extraction efficiency (LEE) for AlGaN-based deep ultraviolet (DUV) light-emitting diodes (LEDs) can be enhanced by using an inclined sidewall of mesa. However, the reported optimal inclined angles are different. In this work, to explore the origin for enhancing the LEE of DUV LED by using inclined sidewalls, we investigate the effect of an inclined sidewall angle on the LEE for AlGaN-based DUV LEDs with different mesa diameters by using ray tracing. It is found that when compared to large-size DUV LEDs with inclined sidewall, the LEE of small-size DUV LEDs with inclined sidewall is enhanced from both the bottom and side surfaces due to the reduced scattering length and material absorption. Additionally, the optimal inclined sidewall angle is recommended within the range of 25°-65°, and the optimal angle for DUV LEDs decreases as the chip size increases. It can be attributed to the fact that there are two scattering mechanisms for the inclined sidewall. For smaller chip sizes, most of the light is directly scattered into escape cones by the inclined sidewall, resulting in a larger optimal angle. For larger chip sizes, the light firstly experiences total internal reflections by the out-light plane and then is scattered into escape cones by the inclined sidewalls, leading to a smaller optimal angle.

Strategically constructed AlGaN doping barriers for efficient deep ultraviolet light-emitting diodes: erratum.

We present an erratum to our Letter [Opt. Lett.49, 2049 (2024)10.1364/OL.522212]. There is a careless omission of some references because our Letter is longer than the maximum allowed four pages. The missing references and their specific quote location are listed in the following. These corrections do not affect the data plotted in figures, discussion, or conclusion of the original Letter.

Enhancing the performance of AlGaN-based DUV-LEDs with multifocal laser stealth dicing

In this study, AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) processed via standard laser dicing (SLD) and multifocal laser stealth dicing (MFLSD) were investigated. Adopting the MFLSD technology would generate a roughing surface rather than the V-shaped grooves on the sidewall of 508 × 508 µm2 DUV-LEDs, which would reduce the forward operating voltage and increase the wall-plug efficiency, light output power, and far-field radiation patterns of these devices. In addition, the wavelength shift, far-field patterns, and light-tracing simulation results of the DUV-LEDs processed with SLD and MFLSD were clearly demonstrated and analyzed. Accordingly, it was observed that the MFLSD process provided more possibilities for photon escape to increase the light extraction efficiency (LEE) of DUV-LEDs, thus decreased the wavelength-redshift and junction temperature in DUV-LEDs. These results provide a reference for advanced nano-processing practices implemented during the fabrication of semiconductor devices.

Light-Field Optimization of Deep-Ultraviolet LED Modules for Efficient Microbial Inactivation

Public awareness of preventing pathogenic microorganisms has significantly increased. Among numerous microbial prevention methods, the deep-ultraviolet (DUV) disinfection technology has received wide attention by using the nitride-based light-emitting diode (LED). However, the light extraction efficiency of DUV LEDs and the utilization rate of emitted DUV light are relatively low at the current stage. In this study, a light distribution design (referred to as the reflective system) was explored to enhance the utilization of emitted DUV from LEDs, leading to successful and efficient surface and air disinfection. Optical power measurements and microbial inactivation tests demonstrated an approximately 79% improvement in average radiation power density achieved by the reflective system when measured at a 5 cm distance from the irradiation surface. Moreover, a statistically significant enhancement in local surface disinfection was observed with low electric power consumption. The reflective system was integrated into an air purifier and underwent air disinfection testing, effectively disinfecting a 3 m3 space within ten minutes. Additionally, a fluorine resin film at the nanolevel was developed to protect the light module from oxidation, validated through a 1200 h accelerated aging test under humid conditions. This research offers valuable guidance for efficient and energy-saving DUV disinfection applications.

Metal-modulated epitaxy of Mg-doped Al0.80In0.20N-based layer for application as the electron blocking layer in deep ultraviolet light-emitting diodes

This work reports the growth and characterization of p-AlInN layers doped with Mg by plasma-assisted molecular beam epitaxy (PAMBE). AlInN was grown with an Al molar fraction of 0.80 by metal-modulated epitaxy (MME) with a thickness of 180 nm on Si(111) substrates using AlN as buffer layers. Low substrate temperatures were used to enhance the incorporation of indium atoms into the alloy without clustering, as confirmed by X-ray diffraction (XRD). Cathodoluminescence measurements revealed ultraviolet (UV) range emissions. Meanwhile, Hall effect measurements indicated a maximum hole mobility of 146 cm2/(V∙s), corresponding to a free hole concentration of 1.23 × 1019 cm−3. The samples were analyzed by X-ray photoelectron spectroscopy (XPS) estimating the alloy composition and extracting the Fermi level by valence band analysis. Mg-doped AlInN layers were studied for use as the electron-blocking layer (EBL) in LED structures. We varied the Al composition in the EBL from 0.84 to 0.96 molar fraction to assess its theoretical effects on electroluminescence, carrier concentration, and electric field, using SILVACO Atlas. The results from this study highlight the importance and capability of producing high-quality Mg-doped p-AlInN layers through PAMBE. Our simulations suggest that an Al content of 0.86 is optimal for achieving desired outcomes in electroluminescence, carrier concentration, and electric field.

Enhancing the Hole Injection in AlGaN-Based Deep Ultraviolet Light-Emitting Diodes With Engineered p-AlGaN Hole Supplier Layer

Enhancing the Hole Injection in AlGaN-Based Deep Ultraviolet Light-Emitting Diodes With Engineered p-AlGaN Hole Supplier Layer

High performance deep-ultraviolet light-emitting diodes with transverse electron injection

Conventional structure deep-ultraviolet light-emitting diodes (DUV-LEDs) at short wavelengths typically suffer from electron overflow and low light-emitting efficiency. For solar-blind communication application, conventional DUV-LEDs are struggling to simultaneously implement high external quantum efficiency (EQE) and high modulation bandwidth. In this paper, we report that transverse structure LEDs can overcome abovementioned problems and achieve high EQE and high modulation bandwidth. The n-AlGaN free transverse structure LEDs have been demonstrated to yield high crystal quality multiple quantum wells (MQWs). Due to the transverse electron injection, transverse structure LEDs can confine electrons well within the MQWs and avoid electron overflow. To enhance the electron injection and light extraction characteristics, the narrow and long mesa designs were optimized by both experimental and theoretical-fit results. Finite-difference time domain simulation indicates that the n+-GaN layer of the transverse LEDs with the transverse MQWs mesa design does not degrade light extraction. The transverse structure LEDs attain the maximum light output power and EQE recorded to date for DUV-LEDs below 250 nm, respectively 14 mW and 1.72 %. Furthermore, the −3 dB modulation bandwidth can be achieved up to 416 MHz.

Low parasitic carrier reservoir of AlGaN-based DUV-LED via controlled-polarization step-graded superlattice electron blocking layer for high luminescence lighting

Achieving high luminescence intensity of deep-ultraviolet light-emitting diode (DUV-LED) is generally performed through the implementation of electron blocking layer (EBL) on the chip’s epilayers. However, the issue of parasitic carrier reservoir that originated from the uncontrolled piezoelectric field polarization has restricted the performance of DUV-LED by reducing the radiative recombination in the active region. This work reports on the numerical computation analysis of the DUV-LED with different types of EBL designs which are reference EBL, conventional superlattice EBL and step-graded superlattice EBL. The analysis of the DUV-LED focuses on the band diagram, carrier concentration at the EBL interfaces, current density of the carrier in the active region, radiative recombination rates, and luminescence spectrum. Remarkably, it is found that the DUV-LED step-graded superlattice EBL provides the polarization-controlled band diagram and emits 272 nm UVC-wavelength in which it is superior in performance compared to the other structures, specifically in terms of its radiated intensity. The parasitic electron and hole reservoir have been reduced by 30% and 60%, respectively. The luminescence intensity was also enhanced by 11% compared with the reference EBL and the IQE obtained by the DUV-LED with step-graded superlattice EBL is 50.12%.

Improving AlGaN-based deep-ultraviolet light-emitting diodes: SiO2 passivation and size optimization for enhanced optoelectronic performance

Improving AlGaN-based deep-ultraviolet light-emitting diodes: SiO2 passivation and size optimization for enhanced optoelectronic performance

Enhanced efficiency of deep ultraviolet light-emitting diodes utilizing full-coverage Al reflector and highly reflective Ni/Rh p-electrode

Increasing the reflection of p-side is an effective way to improve the optoelectronic performance of flip-chip light-emitting diodes (FCLEDs). Here, we propose a full-coverage Al reflector (FAR) and a highly reflective Ni/Rh p-electrode to enhance the performance of deep ultraviolet (DUV) FCLEDs. The physical mechanism for the impact of the FAR and Ni/Rh electrode on the light extraction efficiency (LEE) is discussed theoretically. Simulations demonstrate that the combination of the FAR and Ni/Rh electrode improves the LEEs of transverse electric- and transverse magnetic-polarized light by 13.62% and 27.08%, respectively. At an injection current of 100 mA, the fabricated DUV FCLEDs with FAR and Ni/Rh electrode exhibits an external quantum efficiency of 4.01% and a wall plugging efficiency of 2.92%, which are 16.85% and 13.18% higher than those of conventional DUV FCLEDs, respectively. These results support the promise of the FAR and Ni/Rh electrode for high-power DUV LED applications.

Strategically constructed AlGaN doping barriers for efficient deep ultraviolet light-emitting diodes.

Here, we propose a sandwich-like Si-doping scheme (undoped/Si-doped/undoped) in Al0.6Ga0.4N quantum barriers (QBs) to simultaneously promote the optoelectronic performances and reliability of deep ultraviolet light-emitting diodes (DUV-LEDs). Through experimental and numerical analyses, in the case of DUV-LEDs with conventional uniform Si-doping QB structure, severe operation-induced reliability degradation, including the increase of reverse leakage current (IR) and reduction of light output power (LOP), will offset the enhancement of optoelectronic performances as the Si-doping levels increase to an extent, which hinders further development of DUV-LEDs. According to a transmission electron microscope characterization and a numerical simulation, an improved interfacial quality in multiple quantum wells (MQWs) and more uniform carrier distribution within MQWs are demonstrated for our proposed Si-doping structure in comparison to the uniform Si-doping structure. Consequently, the proposed DUV-LED shows superior wall-plug efficiency (4%), IR at -6 V reduced by almost one order of magnitude, and slower LOP degradation after 168-h 100 mA-current-stress operation. This feasible doping scheme provides a promising strategy for the high-efficiency and cost-competitive DUV-LEDs.

Enhancing light extraction efficiency of the inclined-sidewall-shaped DUV micro-LED array by hybridizing a nanopatterned sapphire substrate and an air-cavity reflector

In this work, we hybridize an air cavity reflector and a nanopatterned sapphire substrate (NPSS) for making an inclined-sidewall-shaped deep ultraviolet micro light-emitting diode (DUV micro-LED) array to enhance the light extraction efficiency (LEE). A cost-effective hybrid photolithography process involving positive and negative photoresist (PR) is explored to fabricate air-cavity reflectors. The experimental results demonstrate a 9.88% increase in the optical power for the DUV micro-LED array with a bottom air-cavity reflector when compared with the conventional DUV micro-LED array with only a sidewall metal reflector. The bottom air-cavity reflector significantly contributes to the reduction of the light absorption and provides more escape paths for light, which in turn increases the LEE. Our investigations also report that such a designed air-cavity reflector exhibits a more pronounced impact on small-size micro-LED arrays, because more photons can propagate into escape cones by experiencing fewer scattering events from the air-cavity structure. Furthermore, the NPSS can enlarge the escape cone and serve as scattering centers to eliminate the waveguiding effect, which further enables the improved LEE for the DUV micro-LED array with an air-cavity reflector.

Design and Performance Evaluation of a Deep Ultraviolet LED-Based Ozone Sensor for Semiconductor Industry Applications.

Ozone (O3) is a critical gas in various industrial applications, particularly in semiconductor manufacturing, where it is used for wafer cleaning and oxidation processes. Accurate and reliable detection of ozone concentration is essential for process control, ensuring product quality, and safeguarding workplace safety. By studying the UV absorption characteristics of O3 and combining the specific operational needs of semiconductor process gas analysis, a pressure-insensitive ozone gas sensor has been developed. In its optical structure, a straight-through design without corners was adopted, achieving a coupling efficiency of 52% in the gas chamber. This device can operate reliably in a temperature range from 0 °C to 50 °C, with only ±0.3% full-scale error across the entire temperature range. The sensor consists of a deep ultraviolet light-emitting diode in a narrow spectrum centered at 254 nm, a photodetector, and a gas chamber, with dimensions of 85 mm × 25 mm × 35 mm. The performance of the sensor has been meticulously evaluated through simulation and experimental analysis. The sensor's gas detection accuracy is 750 ppb, with a rapid response time (t90) of 7 s, and a limit of detection of 2.26 ppm. It has the potential to be applied in various fields for ozone monitoring, including the semiconductor industry, water treatment facilities, and environmental research.

Monolithic integration of deep ultraviolet and visible light-emitting diodes for radiative sterilization application

The demand for effective sterilization methods, particularly in the wake of the Covid-19 pandemic, has sparked interest in the use of deep ultraviolet (DUV) radiation for disinfection. The high risk of skin/eye exposure to the high-energy DUV radiation requires the integration of DUV and visible (VIS) LED chips to sterilize and indicate its operation simultaneously in the portable sterilization devices. However, conventional double-chip integration suffers from high power consumption and fabrication complexity. This study sets out to explore the monolithic integration of DUV and VIS LEDs for the radiative sterilization application. This is accomplished by cascading AlGaN/AlGaN/AlGaN multiple quantum wells (QWs) and GaN/InGaN/GaN QWs through the compositional grading AlGaN cascade region. The inevitable overflown electrons from DUV QWs are deliberately introduced into the VIS QWs, allowing for the electron–hole recombination and the simultaneous emission of VIS light. Both experiment and simulation results confirm the feasibility of the proposed dual-wavelength LED integration. The proposed DUV&VIS LED shows an external quantum efficiency and wall-plug efficiency of 2.03% and 1.54% at 40 mA, respectively. This study establishes a quantitative framework for the monolithic integration of DUV and VIS LEDs for radiative sterilization, which has the potential to replace the current technique of using discrete DUV and VIS double-chip configurations.

Optimization of AlGaN-based deep ultraviolet light emitting diodes with superlattice step doped electron blocking layers.

The superlattice electron blocking layer (EBL) has been proposed to reduce the electron leakage of the deep ultraviolet light emitting diodes (DUV-LEDs). However, the hole transport is hindered by the barriers of EBL and the improvement of hole injection efficiency still suffers enormous challenges. The superlattice step doped (SLSD) EBL is proposed to improve the hole injection efficiency while enhancing the electron confinement capability. The SLSD EBL enhances the electron confinement capability by multi-reflection effects on the electron wave function. And a built-in electric field towards the active region is generated by superlattice step doping, which facilitates the transport of holes into the multiple quantum wells. The Advaced Physical Model of Semiconductor Devices (APSYS) software is used to simulate the DUV-LEDs with conventional EBL, superlattice EBL, superlattice doped EBL, and SLSD EBL. The results indicate that the SLSD EBL contributes to the increased electron concentration in the multiple quantum wells, the reduced electron leakage in the p-type region, the increased hole injection current, and the increased radiative recombination rate. When the current is 60 mA, the external quantum efficiency of DUV-LED with SLSD EBL is increased to 5.27% and the output power is increased to 13.81 mW. The SLSD EBL provides a valuable reference for solving the problems of serious electron leakage and insufficient hole injection of the DUV-LEDs.

Non-heavy doped pnp-AlGaN tunnel junction for an efficient deep-ultraviolet light emitting diode with low conduction voltage.

While traditional tunnel junction (TJ) light-emitting diodes (LEDs) can enhance current diffusion and increase hole injection efficiency, their reliance on highly doped AlGaN layers to improve hole tunneling efficiency results in a higher conduction voltage, adversely impacting LED device performance. This paper proposes a non-heavy doped pnp-AlGaN TJ deep ultraviolet (DUV) LED with a low conduction voltage. By inserting the TJ near the active region, between the electron blocking layer and the hole supply layer, the need for heavily doped AlGaN is circumvented. Furthermore, the LED leverages the polarization charge in the pnp-AlGaN TJ layer to decrease the electric field strength, enhancing hole tunneling effects and reducing conduction voltage. The non-heavy doped pnp-AlGaN TJ LED effectively enhances carrier concentration in the quantum well, achieving a more uniform distribution of electrons and holes, thus improving radiative recombination efficiency. Consequently, at an injection current of 120 A/cm2, compared to the traditional structure LED (without TJ), the proposed LED exhibits a 190.7% increase in optical power, a 142.8% increase in maximum internal quantum efficiency (IQE) to 0.85, and a modest efficiency droop of only 5.8%, with a conduction voltage of just 4.1V. These findings offer valuable insights to address the challenges of high heavy doped TJ and elevated conduction voltage in high-performance TJ DUV LEDs.

Deep ultraviolet AlGaN-multiple quantum wells with photoluminescence enhanced by topological corner state

The AlGaN-based deep ultraviolet light-emitting diode (DUV LED) has advantages of environmentally friendly materials, tunable emission wavelength, and easy miniaturization. However, an increase in Al composition leads to a decline in the lattice quality, thereby reducing the internal quantum efficiency (IQE). In addition, the light extraction efficiency (LEE) is limited due to the strong transverse magnetization polarization emission from the multiple quantum wells. Here, we designed the topological corner structure in AlGaN-MQWs, and the high electric field intensity in a tiny space at the corner results in an extremely high local density of optical states (LDOS), which could shorten the luminescence decay time of the emitter and increase the radiative rate by 26 times. Meanwhile, because the excited topological corner state resonance mode is a transverse-electric mode, enhancing only the transverse-electric luminescence without any gain for transverse-magnetic luminescence, thereby significantly improving the light extraction efficiency. Finally, according to theoretical calculations, the IQE could reach 68.75% at room temperature.