Deep Convolutional Neural Network Classifier Research Articles

A novel skin cancer detection model using modified finch deep CNN classifier model

Skin cancer is one of the most life-threatening diseases caused by the abnormal growth of the skin cells, when exposed to ultraviolet radiation. Early detection seems to be more crucial for reducing aberrant cell proliferation because the mortality rate is rapidly rising. Although multiple researches are available based on the skin cancer detection, there still exists challenges in improving the accuracy, reducing the computational time and so on. In this research, a novel skin cancer detection is performed using a modified falcon finch deep Convolutional neural network classifier (Modified Falcon finch deep CNN) that efficiently detects the disease with higher efficiency. The usage of modified falcon finch deep CNN classifier effectively analyzed the information relevant to the skin cancer and the errors are also minimized. The inclusion of the falcon finch optimization in the deep CNN classifier is necessary for efficient parameter tuning. This tuning enhanced the robustness and boosted the convergence of the classifier that detects the skin cancer in less stipulated time. The modified falcon finch deep CNN classifier achieved accuracy, sensitivity, and specificity values of 93.59%, 92.14%, and 95.22% regarding k-fold and 96.52%, 96.69%, and 96.54% regarding training percentage, proving more effective than literary works.

Multiclass classification of diseased grape leaf identification using deep convolutional neural network(DCNN) classifier

The cultivation of grapes encounters various challenges, such as the presence of pests and diseases, which have the potential to considerably diminish agricultural productivity. Plant diseases pose a significant impediment, resulting in diminished agricultural productivity and economic setbacks, thereby affecting the quality of crop yields. Hence, the precise and timely identification of plant diseases holds significant importance. This study employs a Convolutional neural network (CNN) with and without data augmentation, in addition to a DCNN Classifier model based on VGG16, to classify grape leaf diseases. A publicly available dataset is utilized for the purpose of investigating diseases affecting grape leaves. The DCNN Classifier Model successfully utilizes the strengths of the VGG16 model and modifies it by incorporating supplementary layers to enhance its performance and ability to generalize. Systematic evaluation of metrics, such as accuracy and F1-score, is performed. With training and test accuracy rates of 99.18 and 99.06%, respectively, the DCNN Classifier model does a better job than the CNN models used in this investigation. The findings demonstrate that the DCNN Classifier model, utilizing the VGG16 architecture and incorporating three supplementary CNN layers, exhibits superior performance. Also, the fact that the DCNN Classifier model works well as a decision support system for farmers is shown by the fact that it can quickly and accurately identify grape diseases, making it easier to take steps to stop them. The results of this study provide support for the reliability of the DCNN classifier model and its potential utility in the field of agriculture.

DDA-SSNets: Dual decoder attention-based semantic segmentation networks for COVID-19 infection segmentation and classification using chest X-Ray images.

COVID-19 needs to be diagnosed and staged to be treated accurately. However, prior studies' diagnostic and staging abilities for COVID-19 infection needed to be improved. Therefore, new deep learning-based approaches are required to aid radiologists in detecting and quantifying COVID-19-related lung infections. To develop deep learning-based models to classify and quantify COVID-19-related lung infections. Initially, Dual Decoder Attention-based Semantic Segmentation Networks (DDA-SSNets) such as Dual Decoder Attention-UNet (DDA-UNet) and Dual Decoder Attention-SegNet (DDA-SegNet) are proposed to facilitate the dual segmentation tasks such as lung lobes and infection segmentation in chest X-ray (CXR) images. The lung lobe and infection segmentations are mapped to grade the severity of COVID-19 infection in both the lungs of CXRs. Later, a Genetic algorithm-based Deep Convolutional Neural Network classifier with the optimum number of layers, namely GADCNet, is proposed to classify the extracted regions of interest (ROI) from the CXR lung lobes into COVID-19 and non-COVID-19. The DDA-SegNet shows better segmentation with an average BCSSDC of 99.53% and 99.97% for lung lobes and infection segmentations, respectively, compared with DDA-UNet with an average BCSSDC of 99.14% and 99.92%. The proposed DDA-SegNet with GADCNet classifier offered excellent classification results with an average BCCAC of 99.98%, followed by the GADCNet with DDA-UNet with an average BCCAC of 99.92% after extensive testing and analysis. The results show that the proposed DDA-SegNet has superior performance in the segmentation of lung lobes and COVID-19-infected regions in CXRs, along with improved severity grading compared to the DDA-UNet and improved accuracy of the GADCNet classifier in classifying the CXRs into COVID-19, and non-COVID-19.

Design a novel hybrid optimization with tuned deep convolutional neural network classifier for brain tumor segmentation and classification

Design a novel hybrid optimization with tuned deep convolutional neural network classifier for brain tumor segmentation and classification

Effective IoT-based crop disease prediction using localise search traversing coupled with deep convolutional neural network classifier

Effective IoT-based crop disease prediction using localise search traversing coupled with deep convolutional neural network classifier

Conditional generative adversarial network based data augmentation for fault diagnosis of diesel engines applied with infrared thermography and deep convolutional neural network

This paper tries to introduce a new intelligent method for the early fault diagnosis of diesel engines. Firstly, infrared thermography (IRT) is introduced into diesel engine condition monitoring, then infrared images of diesel engines in four health states, such as normal condition, single-cylinder misfire, multi-cylinder misfire and air filter blockage, are collected and the region of interest (ROI) of infrared images are extracted. Next, conditional generative adversarial network (CGAN) is deployed to perform data augmentation on infrared image datasets. Then, deep convolutional neural network (DCNN) and Softmax regression (SR) classifier are used for automatically extracting infrared image fault features and pattern recognition, respectively. Finally, a comparison with three deep learning (DL) models is performed. The validation results show that the data augmentation method proposed in the paper can significantly improve the early fault diagnosis accuracy, and DCNN has the best fault diagnosis effect and resistance to temperature fluctuation interference among the four DL models.

Investigation of self-supervised pre-trained models for classification of voice quality from speech and neck surface accelerometer signals

Prior studies in the automatic classification of voice quality have mainly studied the use of the acoustic speech signal as input. Recently, a few studies have been carried out by jointly using both speech and neck surface accelerometer (NSA) signals as inputs, and by extracting mel-frequency cepstral coefficients (MFCCs) and glottal source features. This study examines simultaneously-recorded speech and NSA signals in the classification of voice quality (breathy, modal, and pressed) using features derived from three self-supervised pre-trained models (wav2vec2-BASE, wav2vec2-LARGE, and HuBERT) and using a support vector machine (SVM) as well as convolutional neural networks (CNNs) as classifiers. Furthermore, the effectiveness of the pre-trained models is compared in feature extraction between glottal source waveforms and raw signal waveforms for both speech and NSA inputs. Using two signal processing methods (quasi-closed phase (QCP) glottal inverse filtering and zero frequency filtering (ZFF)), glottal source waveforms are estimated from both speech and NSA signals. The study has three main goals: (1) to study whether features derived from pre-trained models improve classification accuracy compared to conventional features (spectrogram, mel-spectrogram, MFCCs, i-vector, and x-vector), (2) to investigate which of the two modalities (speech vs. NSA) is more effective as input in the classification task with pre-trained model-based features, and (3) to evaluate whether the deep learning-based CNN classifier can enhance the classification accuracy in comparison to the SVM classifier. The results revealed that the use of the NSA input showed better classification performance compared to the speech signal. Between the features, the pre-trained model-based features showed better classification accuracies, both for speech and NSA inputs compared to the conventional features. The two classifiers performed equally well for all the pre-trained model-based features for both speech and NSA signals. It was also found that the HuBERT features performed better than the wav2vec2-BASE and wav2vec2-LARGE features for both speech and NSA inputs. In particular, when compared to the conventional features, the HuBERT features showed an absolute accuracy improvement of 3%–6% for speech and NSA signals in the classification of voice quality.

Detection of ovarian follicles cancer cells using hybrid optimization technique with deep convolutional neural network classifier

Having one’s life threatened by a disease like ovarian cancer is the single most crucial thing in the whole world. It is difficult to achieve high performance without sacrificing computational efficiency; the results of the denoising process are not as good as they could be; the proposed models are nonconvex and involve several manually chosen parameters, which provides some leeway to boost denoising performance; the methods generally involve a complex optimisation problem in the testing stage; Here at DnCNN, we’ve developed our own version of the deep ii learning model, a discriminative learning technique. The goal was to eliminate the need for the iterative optimisation technique at the time it was being evaluated. The goal was to avoid having to go through testing altogether, thus this was done. It is highly advised to use a Deep CNN model, the efficacy of which can be evaluated by comparing it to that of more traditional filters and pre-trained DnCNN. The Deep CNN strategy has been shown to be the best solution to minimise noise when an image is destroyed by Gaussian or speckle noise with known or unknown noise levels. This is because Deep CNN uses convolutional neural networks, which are trained using data. This is because convolutional neural networks, which are the foundation of Deep CNN, are designed to learn from data and then use that learning to make predictions. Deep CNN achieves a 98.45% accuracy rate during testing, with an error rate of just 0.002%.

Evaluation of Pavement Surface Distress Using Image Processing and Artificial Neural Network

Abstract Pavement evaluation helps assess the structural and functional condition of roads. Traditional pavement evaluation methods cannot efficiently and accurately assess the state of road conditions at the network level. Though the pavement evaluation techniques based on high-resolution cameras and laser sensors assess the road conditions efficiently at traffic speeds, there are a few limitations in respect of automotive detection and quantification of pavement surface distress. Though artificial intelligence is a broad area, machine learning applications in highway engineering were proven to be successful. This paper presents the automated pavement distress classification using a convolutional neural network (NN) from the Keras library. VGG-16, the deep convolutional NN (DCNN) model, was deployed by necessary modification to get the desired output. The model is trained on a big data set of images with a wide range of pavement defects and irregularities. A DCNN classifier trained with an “Adam” optimizer was used to change the features of the NN to minimize the loss. As an output, the model classifies the pavement surface distresses as alligator cracks, longitudinal cracks, transverse cracks, pothole, and no crack portion of the pavement with maximum accuracy using a DCNN classifier.

Combining 3D skeleton data and deep convolutional neural network for balance assessment during walking.

Introduction: Balance impairment is an important indicator to a variety of diseases. Early detection of balance impairment enables doctors to provide timely treatments to patients, thus reduce their fall risk and prevent related disease progression. Currently, balance abilities are usually assessed by balance scales, which depend heavily on the subjective judgement of assessors. Methods: To address this issue, we specifically designed a method combining 3D skeleton data and deep convolutional neural network (DCNN) for automated balance abilities assessment during walking. A 3D skeleton dataset with three standardized balance ability levels were collected and used to establish the proposed method. To obtain better performance, different skeleton-node selections and different DCNN hyperparameters setting were compared. Leave-one-subject-out-cross-validation was used in training and validation of the networks. Results and Discussion: Results showed that the proposed deep learning method was able to achieve 93.33% accuracy, 94.44% precision and 94.46% F1 score, which outperformed four other commonly used machine learning methods and CNN-based methods. We also found that data from body trunk and lower limbs are the most important while data from upper limbs may reduce model accuracy. To further validate the performance of the proposed method, we migrated and applied a state-of-the-art posture classification method to the walking balance ability assessment task. Results showed that the proposed DCNN model improved the accuracy of walking balance ability assessment. Layer-wise Relevance Propagation (LRP) was used to interpret the output of the proposed DCNN model. Our results suggest that DCNN classifier is a fast and accurate method for balance assessment during walking.

An intelligent fault detection and classification technique based on variational mode decomposition-CNN for transmission lines installed with UPFC and wind farm

The output voltage and current signals of grid-connected doubly-fed induction generator (DFIG)-based wind turbine generators (WTGs) are significantly modulated during grid disturbances. Consequently, the performance of conventionally used distance relaying-based transmission line (TL) protection schemes are affected. The problem becomes further complicated when the interconnected TLs are compensated with unified power flow controller (UPFC). In this paper, an intelligent relaying scheme is proposed for efficient detection and classification of faults in such crucial TLs. In the proposed method, the suitable features are extracted from the locally measured current signals using variational mode decomposition (VMD). The main advantage of VMD is that it can extract the different frequency components of a faulted current signal adaptively with fast convergence. The extracted gray-scale images through VMD are utilized further by the deep convolution neural network (CNN) classifier for effective classification of faults. The efficacy of the proposed relaying algorithm is evaluated on 12000 fault and 120 non-fault cases generated on a system comprising of DFIG-wind farm and UPFC compensation using MATLAB/Simulink® and real time digital simulation platform (OP4510). The fast fault detection time (¡10 ms), high accuracies in the fault detection and classification (100% and 99.86%) justify the merits of the proposed relaying scheme.

Multi-stage glaucoma classification using pre-trained convolutional neural networks and voting-based classifier fusion.

Aim: To design an automated glaucoma detection system for early detection of glaucoma using fundus images. Background: Glaucoma is a serious eye problem that can cause vision loss and even permanent blindness. Early detection and prevention are crucial for effective treatment. Traditional diagnostic approaches are time consuming, manual, and often inaccurate, thus making automated glaucoma diagnosis necessary. Objective: To propose an automated glaucoma stage classification model using pre-trained deep convolutional neural network (CNN) models and classifier fusion. Methods: The proposed model utilized five pre-trained CNN models: ResNet50, AlexNet, VGG19, DenseNet-201, and Inception-ResNet-v2. The model was tested using four public datasets: ACRIMA, RIM-ONE, Harvard Dataverse (HVD), and Drishti. Classifier fusion was created to merge the decisions of all CNN models using the maximum voting-based approach. Results: The proposed model achieved an area under the curve of 1 and an accuracy of 99.57% for the ACRIMA dataset. The HVD dataset had an area under the curve of 0.97 and an accuracy of 85.43%. The accuracy rates for Drishti and RIM-ONE were 90.55 and 94.95%, respectively. The experimental results showed that the proposed model performed better than the state-of-the-art methods in classifying glaucoma in its early stages. Understanding the model output includes both attribution-based methods such as activations and gradient class activation map and perturbation-based methods such as locally interpretable model-agnostic explanations and occlusion sensitivity, which generate heatmaps of various sections of an image for model prediction. Conclusion: The proposed automated glaucoma stage classification model using pre-trained CNN models and classifier fusion is an effective method for the early detection of glaucoma. The results indicate high accuracy rates and superior performance compared to the existing methods.

Deep Convolutional Neural Network Architecture to Detect COVID-19 from Chest X-Ray Images

Today, the world is living in a time of epidemic diseases that spread unnaturally and infect and kill millions of people worldwide. The COVID-19 virus, which is one of the most well-known epidemic diseases currently spreading, has killed more than six million people as of May 2022. The World Health Organization (WHO) declared the 2019 coronavirus disease (COVID-19) after an outbreak of SARS-CoV-2 infection. COVID-19 is a severe and potentially fatal respiratory disease caused by the SARS-CoV-2 virus, which was first noticed at the end of 2019 in Wuhan city. Artificial intelligence plays a meaningful role in analyzing medical images and giving accurate results that serve healthcare workers, especially X-ray images, which are complex images in their interpretation. In this article, two deep convolutional neural network (DCNN) classifiers, such as Inception-v2 and VGG-16, are utilized to detect COVID-19 from a set of chest X-ray images. The dataset for this article was collected from the Kaggle platform (COVID-19 Radiography Database) and consists of images of positive and healthy people. This article concludes that the most suitable performance is the Inception-v2 classifier, which has achieved an accuracy of 97% in comparison to the VGG-16 classifier, which has achieved an accuracy of 93%.

Surface concrete cracks detection and segmentation using transfer learning and multi-resolution image processing

Surface crack detection must be precise and efficient for the structural health monitoring (SHM) of concrete structures. The traditional techniques of crack detection entail human visual examination. These procedures are labor-intensive, expensive, and inefficient. In order to forestall potentially hazardous circumstances caused by concrete surfaces that have deteriorated, it is vital to have an autonomous concrete crack inspection system. Crack detection and segmentation are the two main components of automatic crack inspection. In this research, deep convolutional neural networks (DCNN) and transfer learning (TL) methods are employed for crack detection in concrete structure images, also multiresolution image analysis based on the wavelet transform is the main process in the crack segmentation. The concrete crack dataset is randomly selected from two prevalent concrete crack datasets for developing the proposed method. The results indicated that DCNN classifier models provide good performance with F1-score ranging from 94.5 to 99.6 percent. In addition, the proposed multiresolution image analysis can segment crack pixels with 95.25 percent for the F1-score and shows acceptable and stable performance regarding various segmentation performance metrics.

Knee osteoarthritis classification using social wolf swarm-based deep convolutional neural network

ABSTRACT Osteoarthritis is an agonising disease that affects millions of people every year and the occurrence rate is also increasing promptly. The prompting leads to irrelevant lifestyle among the individuals and early detection and diagnosis help to reduce the influence of osteoarthritis to a greater extent. In this research, knee osteoarthritis is identified using the optimised deep convolutional neural network (deep CNN) classifier from the necessary features extracted. The significant steps in this research are feature extraction using a hybrid pretrained model and classification using optimised deep CNN. The hybrid pretrained model is developed using the Visual Geometry Group (VGG), Resnet 101, and Alexnet architectures and the composed characteristics provide effortless training with reduced error and loss function. The deep CNN classifier is optimised using the social wolf swarm-based optimisation that effectively tunes the classifier by its fitness function and finally, the knee osteoarthritis is determined. The proposed method achieved an efficient accuracy rate of 98%, f1 measure of 94.03%, precision of 98%, and recall of 97.173%, which is more efficient.

Comparison of deep convolutional neural network classifiers and the effect of scale encoding for automated pavement assessment

Comparison of deep convolutional neural network classifiers and the effect of scale encoding for automated pavement assessment

Human Activity Classification Based on Dual Micro-Motion Signatures Using Interferometric Radar

Micro-Doppler signatures obtained from the Doppler radar are generally used for human activity classification. However, if the angle between the direction of motion and radar antenna broadside is greater than 60°, the micro-Doppler signatures generated by the radial motion of human body reduce significantly, thereby degrading the performance of the classification algorithm. For the accurate classification of different human activities irrespective of trajectory, we propose a new algorithm based on dual micro-motion signatures, namely, the micro-Doppler and interferometric micro-motion signatures, using an interferometric radar. First, the motion of different parts of the human body is simulated using motion capture (MOCAP) data, which is further utilized for radar echo signal generation. Second, time-varying Doppler and interferometric spectrograms obtained from time-frequency analysis of a single Doppler receiver and interferometric output data, respectively, are fed as input to the deep convolutional neural network (DCNN) for feature extraction and the training/testing process. The performance of the proposed algorithm is analyzed and compared with a micro-Doppler signatures-based classifier. Results show that a dual micro-motion-based DCNN classifier using an interferometric radar is capable of classifying different human activities with an accuracy level of 98%, where Doppler signatures diminish considerably, providing insufficient information for classification. Verification of the proposed classification algorithm based on dual micro-motion signatures is also performed using a real radar test dataset of different human walking patterns, and a classification accuracy level of approximately 90% is achieved.

Automated identification of myocardial perfusion defects in dynamic cardiac computed tomography using deep learning

PurposeThe purpose of this study was to develop and evaluate deep convolutional neural network (CNN) models for quantifying myocardial blood flow (MBF) as well as for identifying myocardial perfusion defects in dynamic cardiac computed tomography (CT) images. MethodsAdenosine stress cardiac CT perfusion data acquired from 156 patients having or being suspected with coronary artery disease were considered for model development and validation. U-net-based deep CNN models were developed to segment the aorta and myocardium and to localize anatomical landmarks. Color-coded MBF maps were obtained in short-axis slices from the apex to the base level and were used to train a deep CNN classifier. Three binary classification models were built for the detection of perfusion defect in the left anterior descending artery (LAD), the right coronary artery (RCA), and the left circumflex artery (LCX) territories. ResultsMean Dice scores were 0.94 (±0.07) and 0.86 (±0.06) for the aorta and myocardial deep learning-based segmentations, respectively. With the localization U-net, mean distance errors were 3.5 (±3.5) mm and 3.8 (±2.4) mm for the basal and apical center points, respectively. The classification models identified perfusion defects with the accuracy of mean area under the receiver operating curve (AUROC) values of 0.959 (±0.023) for LAD, 0.949 (±0.016) for RCA, and 0.957 (±0.021) for LCX. ConclusionThe presented method has the potential to fully automate the quantification of MBF and subsequently identify the main coronary artery territories with myocardial perfusion defects in dynamic cardiac CT perfusion.

Discriminating Healthy Optic Discs and Visible Optic Disc Drusen on Fundus Autofluorescence and Color Fundus Photography Using Deep Learning—A Pilot Study

The aim of this study was to use deep learning based on a deep convolutional neural network (DCNN) for automated image classification of healthy optic discs (OD) and visible optic disc drusen (ODD) on fundus autofluorescence (FAF) and color fundus photography (CFP). In this study, a total of 400 FAF and CFP images of patients with ODD and healthy controls were used. A pre-trained multi-layer Deep Convolutional Neural Network (DCNN) was trained and validated independently on FAF and CFP images. Training and validation accuracy and cross-entropy were recorded. Both generated DCNN classifiers were tested with 40 FAF and CFP images (20 ODD and 20 controls). After the repetition of 1000 training cycles, the training accuracy was 100%, the validation accuracy was 92% (CFP) and 96% (FAF), respectively. The cross-entropy was 0.04 (CFP) and 0.15 (FAF). The sensitivity, specificity, and accuracy of the DCNN for classification of FAF images was 100%. For the DCNN used to identify ODD on color fundus photographs, sensitivity was 85%, specificity 100%, and accuracy 92.5%. Differentiation between healthy controls and ODD on CFP and FAF images was possible with high specificity and sensitivity using a deep learning approach.

Inventive deep convolutional neural network classifier for emotion identification in accordance with EEG signals

Inventive deep convolutional neural network classifier for emotion identification in accordance with EEG signals