Deep Circumflex Iliac Artery Flap Research Articles

The Chimeric LFC and DCIA Flap in Combined Mandibular and Condylar Head and Neck Reconstruction-A Case Series.

Background: Defects of the ascending ramus of the mandible, including the condylar head and neck or the whole temporomandibular joint (TMJ), are difficult to reconstruct. Reconstruction is mainly based on the use of alloplastic joint prosthesis, costochondral grafting, distraction osteogenesis of the dorsal part of the mandibular ramus, or osseous microvascular flaps of various origin. With the objective of developing a method that overcomes the restrictions of these methods, we recently introduced a sequential chimeric flap consisting of a lateral femoral condyle flap (LFC) and deep circumflex iliac artery flap (DCIA) for reconstruction of up to half of the mandible and the condylar head and neck. Methods: The chimeric flap was used in four patients with the following diagnoses: therapy-refractory osteomyelitis, extended recurrent odontogenic keratozyst, Goldenhar syndrome, and adenocarcinoma of the parotid gland. After a diagnostic workup, LFC and DCIA flaps were harvested in all patients and used in a sequential chimeric design for the reconstruction of the mandibular body and condylar head and neck. Results: Follow-up from at least 24 months up to 70 month after surgery showed a successful reconstruction in all four patients. The LFC provided a cartilaginous joint surface, allowing for a satisfactory masticatory function with a stable occlusion and unrestricted mouth opening and preserved or regained lateral and medial excursions in all patients. The DCIA allowed for a bony reconstruction anatomically resembling a non-atrophied mandibular body. No flap-related complications were observed. Conclusions: The sequential chimeric LFC and DCIA flap is an appropriate method for reconstructing up to half of the mandible and the condylar head and neck. It is suitable in cases where alloplastic joint replacement cannot be used or where other methods have failed. Due to the necessity of harvesting two flaps, the burden of care is increased, and a careful indication is required. The technique is reserved for maxillofacial surgeons who have already gained significant experience in the field of microsurgery.

Retrospective study of the deep circumflex iliac artery flap and the vascularized fibula free flap for maxillary defect repair

ObjectivesThe deep circumflex iliac artery flap (DCIA) and vascularized fibular free flap (FFF) are mainstay flaps for maxillary defect reconstruction. This study compared the functional outcomes and success rates of these flaps to provide midface reconstruction strategies. Materials and MethodsMaxillary defects reconstructed with DCIA or FFF at the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology between May 2016 and May 2023 were retrospectively analyzed. The length, width, and height of the grafted bone segments; intermaxillary distance; buttress reconstruction rate (BRR); dental arch reconstruction rate (DAR); success rate; and dental implantation rate were compared. ResultsThe DCIA and FFF groups had 33 and 27 patients, respectively. Success rate in the DCIA group was 93.94 % and 100 % in the FFF group. The DCIA length was less than that of FFF; however, the width and height were significantly larger. 87.10 % of cases in the DCIA group were classified as Brown class b and c, 51.85 % of cases in the FFF group were classified as Brown class d. The average BRR in the DCIA group was 69.89 % ± 16.05 %, which was significantly higher than that in the FFF group. A total of 38.7 % and 11.1 % patients in the DCIA and FFF groups, respectively, had completed implantation. ConclusionDCIA has a greater width and height, and is more suitable for repairing Brown class b and c defects, providing sufficient bone for implantation, while the FFF is longer and more suitable for Brown class d defect reconstruction.

Development of a universal cutting guide for raising deep circumflex iliac artery flaps.

The deep circumflex iliac crest flap (DCIA) is used for the reconstruction of the jaw. For fitting of the transplant by computer-aided planning (CAD), a computerized tomography (CT) of the jaw and the pelvis is necessary. Ready-made cutting guides save a pelvic CT and healthcare resources while maintaining the advantages of the CAD planning. A total of 2000 CTs of the pelvis were divided into groups of 500 by sex and age (≤ 45 and > 45 years). Three-dimensional (3D) pelvis models were aligned and averaged. Cutting guides were designed on the averaged pelvis for each group and an overall averaged pelvis. The cutting guides and 50 randomly selected iliac crests (10 from each group and 10 from the whole collective) were 3D printed. The appropriate cutting guide was mounted to the iliac crest and a cone beam CT was performed. The thickness of the space between the iliac crest and the cutting guide was evaluated. Overall the mean thickness of the space was 2.137mm and the mean volume of the space was 4513mm3. The measured values were significantly different between the different groups. The overall averaged group had not the greatest volume, maximum thickness and mean thickness of the space. Ready-made cutting guides for the DCIA flap fit to the iliac crest and make quick and accurate flap raising possible while radiation dose and resources can be saved. The cutting guides fit sufficient to the iliac crest and should keep the advantages of a standard CAD planning.

Short and Extra Short Dental Implants in Osseous Microvascular Free Flaps: A Retrospective Case Series.

There is limited information regarding implant and prosthetic survival after osseous microvascular free flap (OMFF). This case series aims to describe the placement of short and extra short implants in osseous microvascular free flaps to support prostheses, and present an up to 40-month retrospective follow-up. Short and extra short dental implants were placed in six fibula free flaps (FFF) and in two microvascular deep circumflex iliac artery (DCIA) flaps. In total, 27 short and extra short dental implants have been placed into two different types of free flaps. Kaplan-Meyer (K-M) survival analyses were performed to evaluate the survival and success outcomes of implants and prostheses. Out of the eight patients reconstructed with free flap, five were rehabilitated with prostheses, one patient has a temporary prosthesis, and two patients are in the process of prosthetic rehabilitation. Twenty-seven implants were followed up for up to 40 months, and K-M analyses showed 100% implant survival probability (95% confidence interval: 100%), while the implant success probability was 91.0% (95% confidence interval: 68.6-97.7%). Short and extra short dental implants placed in OMFF presented high survival and success rates in a retrospective case series after up to 40 months.

Mandibular reconstruction using an iliac bone flap with perforator-supported external oblique abdominal muscle island: a pilot study

The deep circumflex iliac artery (DCIA) flap is one of the bone flaps commonly used for mandibular reconstruction. Observation of the skin paddle and Doppler ultrasound are methods that are usually used to monitor DCIA flaps after mandibular reconstruction surgery. The aim of this study was to introduce a novel DCIA flap with a perforator-supported external oblique abdominal muscle (EOAM) island for postoperative flap monitoring. This study included five patients who underwent mandibular reconstruction using this modified technique. The DCIA flap and the EOAM island supplied by the ascending branch of the DCIA were harvested during the surgery. After mandibular reconstruction, the EOAM island was placed in the submandibular region to monitor the blood supply to the DCIA flap after surgery. The blood supply to the DCIA flap was monitored by observing the colour, texture, and bleeding condition of the EOAM island. After the monitoring period, the EOAM was removed and the ascending branch of the DCIA was ligated. The outcome was successful in all patients. The EOAM island supported by the ascending branch of the DCIA is reliable and safe, thus providing a robust option to monitor the blood supply to the DCIA flap.

Reconstruction of the anterior maxillary defect using a vascularized bone flap with residual teeth in the posterior maxilla.

Microsurgical bone reconstruction is challenging in cases of anterior maxillary defects because of the presence of residual teeth. The study analyzed the method and feasibility of using vascularized bone flaps to reconstruct anterior maxillary defects. We retrospectively analyzed 15 patients treated at the Department of Oral and Maxillofacial Surgery, Peking University School, and Hospital of Stomatology between November 2017 and January 2023. A total of 14 patients were successfully reconstructed using the digital technique: 6 deep circumflex iliac artery (DCIA) flaps and 8 fibular free flaps. Palatal and buccal pedicle paths were used in 4 and 10 cases, respectively, for vascular anastomosis. The implant coverage rates of the DCIA and fibular free flaps were 87.2% and 92.6%, respectively (p > 0.05). Anterior maxillary defects reconstructed with the DCIA and fibular free flaps are reliable methods. Furthermore, the palatal and buccal paths are recommended for vascular anastomosis.

Biomechanical behavior of the three-dimensionally printed surgical plates for mandibular defect reconstruction: a finite element analysis

The aim of the study was to investigate the biomechanical behavior of three-dimensionally (3D)-printed surgical plates used for mandibular defect reconstruction, compare them with conventional surgical plates, and provide experimental evidence for their clinical application. Three-dimensional models were created for the normal mandible and for mandibular body defects reconstructed using free fibula and deep circumflex iliac artery flaps. Three-dimensional finite element models of reconstructed mandibles fixed using 3D-printed and conventional surgical plates were established. Vertical occlusal forces were applied to the remaining teeth and the displacement and Von Mises stress distributions were studied using finite element analysis. The normal and reconstructed mandibles had similar biomechanical behaviors. The displacement distributions for the surgical plates were similar, and the maximum total deformation occurred at the screw hole of the anterior segment of the surgical plates. However, there were differences in the Von Mises stress distributions for the surgical plates. In reconstructed mandibles fixed using 3D-printed surgical plates, the maximum equivalent Von Mises stress occurred at the screw hole of the posterior segment, while in those fixed using conventional surgical plates, the maximum equivalent Von Mises stress was at the screw hole of the anterior segment. In the mandible models reconstructed with the same free flap but fixed with different surgical plates, the plates had similar biomechanical behaviors. The biomechanical behavior of 3D-printed surgical plates was similar to conventional surgical plates, suggesting that 3D-printed surgical plates used to reconstruct mandibular body defects with vascularized autogenous bone grafts could lead to secure and stable fixation.

Deep Circumflex Iliac Artery Flap Reconstruction in Brown Class I Defect of the Mandible Using a Three-Component Surgical Template System.

Computer-assisted surgery is widely used in mandibular reconstruction, but the process is not well described for cases using the deep circumflex iliac artery flap (DCIA) as the donor site. This study aimed to present a DCIA-based three-component surgical template system (3-STS) in patients with a mandibular Brown class I defect. This retrospective cohort study compared clinical outcomes of mandibular reconstruction with DCIA flap using 3-STS or conventional surgical templates. The primary outcome of the study was the accuracy of reconstruction, and the secondary outcomes included surgical time and bone flap ischemia time. Surgery-related parameters and functional outcomes were also recorded and compared. Forty-four patients (23 in the 3-STS group and 21 in the control group) between 2015 and 2021 were included. Compared with the control group, the 3-STS group had higher accuracy of reconstruction, indicated by lower deviation in absolute distance (1.45 ± 0.76 mm versus 2.02 ± 0.89 mm; P = 0.034), and less deviation in coronal and sagittal angles (0.86 ± 0.53 degree versus 1.27 ± 0.59 degrees, P = 0.039; and 2.52 ± 1.00 degrees versus 3.25 ± 1.25 versus, P = 0.047) between preoperative and postoperative computed tomographic imaging. Surgical time and bone flap ischemia time were significantly reduced in the 3-STS group compared with the control group (median time, 385 minutes versus 445 minutes and 32 minutes versus 53 minutes, respectively; P < 0.001). In addition, masseter attachment was preserved in the 3-STS group but not in the control group. No differences were found in adverse events or other clinical variables. The 3-STS can improve accuracy, simplify intraoperative procedures to increase surgical efficiency, and preserve functionality in mandibular reconstruction for Brown class I defects. Therapeutic, III.

Fixation of Iliac Avulsion Fracture Using Additive Manufacturing Titanium Mesh after DCIA Flap Harvesting: Case Report

Jaw defects can have a variety of causes, including tumors, trauma, and osteomyelitis. The reconstruction of jaw defects has been improved with the free flap technique and sophisticated microvascular techniques. A deep circumflex iliac artery (DCIA) flap provides a large amount of bone for the reconstruction of the mandible. However, various complications and side effects, such as abnormal hip contour, hernia, severe bleeding tendency, gait disturbance, and hypoesthesia, can occur. Iliac bone fracture is not a common complication after DCIA flap harvesting, because the anterior superior iliac spine (ASIS) can include the harvested flap. If an iliac avulsion fracture occurs, various treatment options exist. If severe dislocation of the bone fragment exists, open reduction and internal fixation are required. At this time, orthopedic implants composed of various materials can be used. Among these, when using a 3D-fabricated implant using a Ti6Al4V alloy, the accuracy of the size and shape is excellent, and it can have mechanical–biocompatible advantages. In this study, we report cases of iliac bone fracture after reconstruction of the jaw with a DCIA flap and the treatment modality using a 3D-printed, patient-specific titanium implant.

Accurate occlusion-driven maxillary reconstruction with deep circumflex iliac artery flap using computer-assisted techniques and intraoral anastomosis: a case series

The aim of this study was to evaluate the feasibility and accuracy of occlusion-driven maxillary reconstruction with the deep circumflex iliac artery (DCIA) flap, using computer-assisted design and manufacturing (CAD/CAM) technology and intraoral anastomosis. The data of 11 patients who underwent occlusion-driven maxillary reconstruction with this method between December 2018 and December 2020 in the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology were reviewed retrospectively. Postoperative complications and functional and aesthetic outcomes were recorded. The accuracy of the postoperative restoration was assessed using Geomagic Control 2014. Reconstruction was successful in nine patients; all were satisfied with their aesthetic and functional outcomes. One patient underwent extraoral anastomosis after failure of intraoral anastomosis. In another patient, the DCIA flap had to be removed after the operation because of flap failure. Among the 10 patients with DCIA flap success, colour map analysis showed a mean deviation of 0.40 ± 0.08 mm between the preoperative and postoperative craniomaxillary models. Thus, occlusion-driven maxillary reconstruction with the DCIA flap, using CAD/CAM technology and intraoral anastomosis, appears to be a feasible and accurate method for the repair of maxillary defects.

Analysis of the accuracy of computer‐assisted DCIA flap mandibular reconstruction applying a novel approach based on geometric morphometrics

This study evaluated the accuracy of computer-assisted surgery (CAS)-driven DCIA (deep circumflex iliac artery) flap mandibular reconstruction by traditional morphometric methods and geometric morphometric methods (GMM). Reconstruction accuracy was evaluated by measuring distances and angles between bilateral anatomical landmarks. Additionally, the average length of displacements vectors between landmarks was computed to evaluate factors assumed to influence reconstruction accuracy. Principal component analysis (PCA) was applied to unveil main modes of dislocation. High reconstruction accuracy could be demonstrated for a sample consisting of 26 patients. The effect of the number of segments and length of defect on reconstruction accuracy were close to the commonly used significance threshold (p=0.062/0.060). PCA demonstrated displacement to result mainly from sagittal and transversal shifts. CAS is a viable approach to achieve high accuracy in mandibular reconstruction and GMM can facilitate the evaluation of factors influencing reconstruction accuracy and unveil main modes of dislocation in this context.

Analysis of Dental Implant Rehabilitation in the Reconstructed Jaw by Deep Circumflex Iliac Artery Flap, a Retrospective Study

The purpose of this study is to analyze the clinical results of the implant rehabilitation for a jaw reconstructed by the deep circumflex iliac artery (DCIA) flap. A total of 13 patients were included in this study from 2010 to 2020. Medical records were collected retrospectively and analyzed. The mandible was involved in 10 cases and the maxilla was in 3 cases. The average width of the DCIA flap was 8.6 mm, and the height was 20.65 mm. A total of 41 dental implants with a diameter of 3.9–5.0 mm and a length of 10.0–11.5 mm were placed at an average of 12.3 months after the reconstruction. The average follow-up period after delivering a permanent prosthesis was 15 months (range, 2 to 51 months) and the overall mean follow-up period was 48 months. In all, 3 implants of the total 41 implants were removed. The DCIA flap is the most suitable for reproducing the original contour of the original jawbone compared with the fibular flap. In addition, the height and width of the reconstructed bone is appropriate for implant placement, which is advantageous for the rehabilitation of oral function and aesthetics using the implant.

Virtual Surgical Planning of Deep Circumflex Iliac Artery Flap for Midface Reconstruction.

ObjectiveMidface reconstruction is challenging for functional and esthetic reasons. The present study analyzed the effect of virtual surgical planning (VSP) of the deep circumflex iliac artery (DCIA) flap for midface reconstruction.Patients and MethodsThirty-four patients who underwent midface reconstruction with the DCIA flap were included in this retrospective study. Of the 34 patients, 16 underwent preoperative VSP, which used a three-dimensionally printed surgical guide, computer-assisted navigation system, and pre-bent titanium implants to transfer VSP into real-world surgery. The other 18 patients underwent traditional midface reconstruction. The following were compared between the two groups: bony contact rate in the buttress region (BCR), dental arch reconstruction rate (DAR), surgical approach, position of vascular anastomosis, and dental implantation rate. The independent-samples t-test and Fisher’s exact test were used for analysis. P < 0.05 was considered statistically significant.ResultsIn total, 12 males and 22 females were included in this study. All patients underwent midface reconstruction using the DCIA flap at the same institution. The median age of patients was 33 years (range: 16–68 years). The average BCR and DAR values in the VSP group were 59.4% ± 27.9% and 87.5% ± 18.9%, respectively, which were significantly higher compared with the non-VSP group (P = 0.049 and P = 0.004, respectively). The dental implantation rate in the VSP group (50.0%) was significantly higher compared with the non-VSP group (11.1%; P = 0.023). The intraoral approach for tumor ablation and vascular anastomosis was the most frequent choice in both groups. There was no significant difference between the two groups. All patients were satisfied with facial symmetry postoperatively.ConclusionsVSP could effectively augment the effect of midface reconstruction with the DCIA flap. Stronger bone contact in the buttress region and higher DAR provide more opportunity for dental implantation, which might be the best solution to improve masticatory function in patients with midface defects.

Application of Free Iliac Bone Flap Based on Superficial Circumflex Iliac Perforators in Mandibular Reconstruction.

We introduce the application of mandibular reconstruction with the superficial circumflex iliac artery (SCIA)-based iliac bone flap. Until now, iliac bone flaps based on the SCIA have been used in relatively small bony and plane defects, such as in the orbital floor, maxilla, distal phalanx, and calcaneus. This flap has minimal donor-site morbidity compared with the conventional deep circumflex iliac artery flap, and it can be harvested simultaneously with tumor resection in most reconstructions, including those in the head and neck. A great advantage of the SCIA-based iliac bone flap is the thin and reliable large skin paddle that can be used for intraoral and lip defects. Although there are remaining problems to overcome, such as the blood circulation to the bone, this flap may be an option in mandibular reconstruction where there are large soft tissue defects, or where there is complicated peripheral arteriosclerosis or arterial abnormality.

Three-dimensional Printing Technology for Deep Circumflex Iliac Artery Flap: From Recipient to Donor Sites.

SummaryThe deep circumflex iliac artery (DCIA) flap is one of the most commonly used vascularized free flaps for jaw reconstruction; however, its clinical application is limited by donor site complications. We aimed to describe a new technique of using 3-dimensionally (3D) printed patient-specific devices for mandibular reconstruction with DCIA flap and simultaneous dental implants, and for donor site restoration after harvesting the DCIA flap. One patient with mandible ameloblastoma underwent mandibular reconstruction using a DCIA flap with the “jaw-in-a-day” approach. The 3D-printed patient-specific devices included mandibular cutting guides, DCIA harvesting and dental implant guide, surgical plate, and iliac prosthesis. The postoperative 1-month accuracy measurement showed the mean distance deviations of the mandible, transferred bone grafts, dental implants and iliac prosthesis were 1.8 mm, 2.1 mm, 0.9 mm, and 1.2 mm, respectively. Three-dimensionally printed iliac prosthesis satisfactorily restored the contour of the iliac crest after DCIA flap harvesting. No complication of donor site was recorded during the follow-up of 12 months. We successfully used 3D-printed patient-specific implants in both donor and recipient sites for DCIA flap jaw reconstruction. Further studies with a larger sample size and long-term follow-up are needed.

Abdominal-based free flaps in head and neck reconstruction.

The head and neck reconstructive surgeon is intimately familiar with the anterolateral thigh, radial forearm, and parascapular flaps. This review serves to describe the major abdominal-based free tissue transfers in head and neck reconstruction that can be used as alternatives to these traditional workhorse flaps. Abdominal-based free flaps, while not traditionally used in head and neck reconstruction, are great alternatives or second-line flaps. For example, the deep circumflex iliac artery flap is an excellent alternative to the fibular free flap due to its bone height and greater overall quality of life. This review article serves to review the major abdominal-based free tissue transfers in head and neck reconstruction in order to expand the toolbox of the head and neck surgeon.

The deep circumflex iliac artery free flap in maxillofacial reconstruction: a comparative institutional analysis.

The aim of the present study was to perform a comparative analysis of the utility, outcomes, and complications of DCIA (deep circumflex iliac artery) flap for the reconstruction of maxillofacial defects between two institutions that continue to use the DCIA flap as a reconstructive resource. This retrospective analysis included a total of 68 patients (mean age 51.1 years) at the University Hospital of Parma, Parma, Italy, and the University of Maryland, Baltimore, USA, between January 2010 and April 2019. No statistical differences were found in relation to the site of reconstruction (p = 0.09), bone graft quantity (p = 0.93), rehabilitation with dental implants (p = 0.464), length of hospitalization (p = 0.086), BMI (0.677), swallow function (p = 0.419), medical comorbidities (p = 0.933), pre-existing radiation (p = 0.691), adjuvant treatment (p = 0.298), ECOG-PS pre-and post-surgery (p = 0.329; p = 0.545), and flap failure: one partial failure observed (p = 0.412) and donor site morbidities (p = 0.742). A noted trend to increased risk of hernia without the use of a primary mesh repair was observed (p = 0.059). The DCIA free flap represents a useful and reliable reconstructive flap for maxillofacial reconstruction. Reconstructive microvascular surgeons should be proficiently trained in this flap technique for its consideration as a first-line option in maxillofacial reconstruction.

Improved procedure for Brown’s Class III maxillary reconstruction with composite deep circumflex iliac artery flap using computer-assisted technique

Reconstruction of Brown’s Class III maxillary defect can be challenging due to the complex geometry of maxilla. We aimed to introduce an improved method for maxillary reconstruction with a composite deep circumflex iliac artery (DCIA) flap aided by virtual surgical planning and intraoperative navigation. A 27-year-old woman diagnosed with left maxillary fibromyxoma was admitted to our institution in December 2018. Pre-operative facial and iliac computed tomography data were obtained for virtual surgical planning. Personalized cutting template, tooth-supported surgical guide, and rapid prototype model with reconstructed orbital floor were printed for pre-operative preparation. Surgery was completely guided by the intraoperative navigation system. The root mean square estimate of the reconstructed area was 3.68 mm. The average errors measured on the lateral and medial DCIA segments were 0.61 and 0.85 mm, respectively. Application of virtual surgical planning and intraoperative navigation could potentially enhance the reconstruction outcomes.

New series of surgical design for anterior maxillary reconstruction with deep circumflex iliac artery flap.

Microsurgical reconstruction for anterior maxillary defects presents a surgical challenge. The objective of this study was to ascertain the feasibility of a new series of intraoral surgical approach using deep circumflex iliac artery (DCIA) flap to achieve functional reconstruction for anterior maxillary defects. Two male patients with anterior maxillary defects (Brown Class IC) were treated in this study. Both patients underwent computer-assisted maxillary reconstruction with a DCIA flap (with pedicle positioning laterally to the bony flap) using intraoral anastomosis techniques. The overall DCIA flap survival rate was 100% and mucosa was all healed uneventfully. One patient received dental implantation and loaded with prosthetic superstructures. Both patients were satisfied with their postoperative oral function and appearance. This study illustrated a new and feasible series of surgical design for anterior maxillary bone defect reconstruction with DCIA flaps and intraoral anastomosis assisted by digital techniques.

Three-dimensional CAD/CAM reconstruction of the iliac bone following DCIA composite flap harvest

This article reports a new technique to restore iliac bone integrity with a customized titanium device designed by CAD/CAM, in patients undergoing deep circumflex iliac artery (DCIA) composite flap harvest. Eight consecutive patients who underwent the repair of major head and neck defects with DCIA flaps were enrolled retrospectively. Computed tomography scans of the pelvis were obtained preoperatively. Starting from DICOM data, each personalized device was designed using modelling software and was finally made by additive manufacturing using a laser sintering machine. After surgery, the patients were followed up at 3-month intervals to evaluate the incidence of complications and the long-term outcome at the donor site. A subcutaneous seroma developed in one patient and an inguinal skin burn occurred in another. At a median follow-up of 12 months, the patients did not report pain, or any gait or sensory disturbance at the donor site. There was no occurrence of bulging, herniation, or instability or inflammation near the device for the entire follow-up duration. All patients were satisfied with the aesthetic result. In conclusion, reconstruction of the iliac bone with a customized device is safe and well tolerated. We recommend use of this device in patients deemed at high risk of herniation. Further studies are needed to confirm the stability of the device in the long term.