Decellularized Lung Matrix Research Articles

Pulmonary matrix-derived hydrogels from patients with idiopathic pulmonary fibrosis induce a proinflammatory state in lung fibroblasts in vitro.

Idiopathic pulmonary fibrosis (IPF), one of the most common forms of interstitial lung disease, is a poorly understood, chronic, and often fatal fibroproliferative condition with only two FDA-approved medications. Understanding the pathobiology of the fibroblast in IPF is critical to evaluating and discovering novel therapeutics. Using a decellularized lung matrix derived from patients with IPF, we generate three-dimensional hydrogels as in vitro models of lung physiology and characterize the phenotype of fibroblasts seeded into the hydrogels. When cultured in IPF extracellular matrix hydrogels, IPF fibroblasts display differential contractility compared with their normal counterparts, lose the classical myofibroblast marker α-smooth muscle actin, and increase expression of proinflammatory cytokines compared with fibroblasts seeded two-dimensionally on tissue culture dishes. We validate this proinflammatory state in fibroblast-conditioned media studies with monocytes and monocyte-derived macrophages. These findings add to a growing understanding of the lung microenvironment effect on fibroblast phenotypes, shed light on the potential role of fibroblasts as immune signaling hubs during lung fibrosis, and suggest intervention in fibroblast-immune cell cross-talk as a possible novel therapeutic avenue.

Preparation of Decellularized Lung Matrix Scaffolds and Evaluation of its Effect on Endometrial Stem Cell Differentiation into Lung Epithelial-like Cells

Preparation of Decellularized Lung Matrix Scaffolds and Evaluation of its Effect on Endometrial Stem Cell Differentiation into Lung Epithelial-like Cells

Using extracellular matrix derived from sugen-chronic hypoxia lung tissue to study pulmonary arterial hypertension.

Pulmonary arterial hypertension has characteristic changes to the mechanical environment, extracellular matrix, and cellular proliferation. In order to develop a culture system to investigate extracellular matrix (ECM) compositional-dependent changes in pulmonary arterial hypertension, we decellularized and characterized protein and lipid profiles from healthy and Sugen-Chronic Hypoxia rat lungs. Significant changes in lipid profiles were observed in intact Sugen-Hypoxia lungs compared with healthy controls. Decellularized lung matrix retained lipids in measurable quantities in both healthy and Sugen-Chronic Hypoxia samples. Proteomics revealed significantly changed proteins associated with pulmonary arterial hypertension in the decellularized Sugen-Chronic Hypoxia lung ECM. We then investigated the potential role of healthy vs. Sugen-Chronic Hypoxia ECM with controlled substrate stiffness to determine if the ECM composition regulated endothelial cell morphology and phenotype. CD117+ rat lung endothelial cell clones were plated on the variable stiffness gels and cellular proliferation, morphology, and gene expression were quantified. Sugen-Chronic Hypoxia ECM on healthy stiffness gels produced significant changes in cellular gene expression levels of Bmp2, Col1α1, Col3α1 and Fn1. The signaling and cell morphology observed at low substrate stiffness suggests early changes to the ECM composition can initiate processes associated with disease progression. These data suggest that Sugen-Chronic Hypoxia ECM can be used to investigate cell-ECM interactions relevant to pulmonary arterial hypertension.

A decellularized lung extracellular matrix/chondroitin sulfate/gelatin/chitosan-based 3D culture system shapes breast cancer lung metastasis

Distal metastasis of breast cancer is a primary cause of death, and the lung is a common metastatic target of breast cancer. However, the role of the lung niche in promoting breast cancer progression is not well understood. Engineered three-dimensional (3D) in vitro models capable of bridging this knowledge gap can be specifically designed to mimic crucial characteristics of the lung niche in a more physiologically relevant context than conventional two-dimensional systems. In this study, two 3D culture systems were developed to mimic the late stage of breast cancer progression at a lung metastatic site. These 3D models were created based on a novel decellularized lung extracellular matrix/chondroitin sulfate/gelatin/chitosan composite material and on a porcine decellularized lung matrix (PDLM), with the former tailored with comparable properties (stiffness, pore size, biochemical composition, and microstructure) to that of the in vivo lung matrix. The different microstructure and stiffness of the two types of scaffolds yielded diverse presentations of MCF-7 cells in terms of cell distribution, cell morphology, and migration. Cells showed better extensions with apparent pseudopods and more homogeneous and reduced migration activity on the composite scaffold compared to those on the PDLM scaffold. Furthermore, alveolar-like structures with superior porous connectivity in the composite scaffold remarkably promoted aggressive cell proliferation and viability. In conclusion, a novel lung matrix-mimetic 3D in vitro breast cancer lung metastasis model was developed to clarify the underlying correlativity between lung ECM and breast cancer cells after lung colonization. A better understanding of the effects of biochemical and biophysical environments of the lung matrix on cell behaviors can help elucidate the potential mechanisms of breast cancer progression and further improve target discovery of therapeutic strategies.

Engineering a 3D Vascularized Adipose Tissue Construct Using a Decellularized Lung Matrix.

Critically sized defects in subcutaneous white adipose tissue result in extensive disfigurement and dysfunction and remain a reconstructive challenge for surgeons; as larger defect sizes are correlated with higher rates of complications and failure due to insufficient vascularization following implantation. Our study demonstrates, for the first time, a method to engineer perfusable, pre-vascularized, high-density adipose grafts that combine patient-derived adipose cells with a decellularized lung matrix (DLM). The lung is one of the most vascularized organs with high flow, low resistance, and a large blood–alveolar interface separated by a thin basement membrane. For our work, the large volume capacity within the alveolar compartment was repurposed for high-density adipose cell filling, while the acellular vascular bed provided efficient graft perfusion throughout. Both adipocytes and hASCs were successfully delivered and remained in the alveolar space even after weeks of culture. While adipose-derived cells maintained their morphology and functionality in both static and perfusion DLM cultures, perfusion culture offered enhanced outcomes over static culture. Furthermore, we demonstrate that endothelial cells seamlessly integrate into the acellular vascular tree of the DLM with adipocytes. These results support that the DLM is a unique platform for creating vascularized adipose tissue grafts for large defect filling.

Type I Collagen Signaling Regulates Opposing Fibrotic Pathways through α2β1 Integrin

Fibrosis is characterized by fibroblast activation, leading to matrix remodeling culminating in a stiff, type I collagen-rich fibrotic matrix. Alveolar epithelial cell (AEC) apoptosis is also a major feature of fibrogenesis, and AEC apoptosis is sufficient to initiate a robust lung fibrotic response. TGF-β (transforming growth factor-β) is a major driver of fibrosis and can induce both AEC apoptosis and fibroblast activation. We and others have previously shown that changes in extracellular matrix stiffness and composition can regulate the cellular response to TGF-β. In the present study, we find that type I collagen signaling promotes TGF-β-mediated fibroblast activation and inhibits TGF-β-induced AEC death. Fibroblasts cultured on type I collagen or fibrotic decellularized lung matrix had augmented activation in response to TGF-β, whereas AECs on cultured on type I collagen or fibrotic lung matrix were more resistant to TGF-β-induced apoptosis. Both of these responses were mediated by integrin α2β1, a major collagen receptor. AECs treated with an α2 integrin inhibitor or with deletion of α2 integrin had loss of collagen-mediated protection from apoptosis. We found that mice with fibroblast-specific deletion of α2 integrin were protected from fibrosis whereas mice with AEC-specific deletion of α2 integrin had more lung injury and a greater fibrotic response to bleomycin. Intrapulmonary delivery of an α2 integrin-activating collagen peptide inhibited AEC apoptosis in vitro and in vivo and attenuated the fibrotic response. These studies underscore the need for a thorough understanding of the divergent response to matrix signaling.

Induction of lung-like cells from mouse embryonic stem cells by decellularized lung matrix

Decellularization of tissues is a recently developed technique mostly used to provide a 3-dimensional matrix structure of the original organ, including decellularized lung tissues for lung transplantation. Based on the results of the present study, we propose new utilization of decellularized tissues as inducers of stem cell differentiation. Decellularized lung matrix (L-Mat) samples were prepared from mouse lungs by SDS treatment, then the effects of L-Mat on differentiation of ES cells into lung cells were investigated. ES cell derived-embryoid bodies (EBs) were transplanted into L-Mat samples and cultured for 2 weeks. At the end of the culture, expressions of lung cell-related markers, such as TTF-1 and SP-C (alveolar type II cells), AQP5 (alveolar type I cells), and CC10 (club cells), were detected in EB outgrowths in L-Mat, while those were not found in EB outgrowths attached to the dish. Our results demonstrated that L-Mat has an ability to induce differentiation of ES cells into lung-like cells.

Electrospun Decellularized Lung Matrix Scaffold for Airway Smooth Muscle Culture.

Chronic respiratory disease affects many people worldwide with little known about the intricate mechanisms driving the pathology, making it difficult to develop novel therapies. Improving the understanding of airway smooth muscle and extracellular matrix (ECM) interactions is key to developing treatments for this leading cause of death. With currently no relevant or controllable in vivo or in vitro models to investigate cell-ECM interactions in the small airways, the development of a biomimetic in vitro model with cell attachment, signaling, and organization is needed. The goal of this study was to create a biologically and structurally relevant in vitro model of small airway smooth muscle. In order to achieve this goal, a scaffold was engineered from synthetic poly-l-lactic acid (PLLA) and decellularized pig lung ECM (PLECM). PLECM scaffolds have improved physical characteristics over synthetic scaffolds, by exhibiting a significant decrease in the elastic modulus and an increase in hydrophilicity. Histological staining and SDS-PAGE showed that essential proteins or protein fragments found in natural ECM were present after processing. Human bronchial smooth muscle cells (HBSMCs) seeded onto PLECM 3D scaffolds formed confluent layers and maintained a contractile phenotype, as demonstrated by the organized arrangement of actin filaments within the cell and expected contractile protein expression of calponin 1. HBSMCs cultured on electrospun PLECM scaffold also increased alpha-1 type 1 collagen compared to those cultured on PLLA scaffolds. In summary, this research demonstrates that a PLLA/PLECM composite electrospun mat is a promising tool to produce an in vitro model of the airway with the potential for a better understanding of bronchiole smooth muscle behavior in diseased or normal states.

Native matrix-based human lung alveolar tissue model in vitro: studies of the reparatory actions of mesenchymal stem cells.

Studies of lung diseases in vitro often rely on flat, plastic-based monocultures, due to short lifespan of primary cells, complicated anatomy, lack of explants, etc. We hereby present a native 3D model with cues for repopulating epithelial cells. Abilities of mesenchymal stem cells (MSC) to modulate bacterial lipopolysaccharide (LPS) and cigarette smoke-induced injury to pulmonary epithelium were tested in our model. Post-mortem human lung tissue was sliced, cut and decellularized. Resulting matrix pads were reseeded with pulmonary epithelium (A549 line). Markers of the layer integrity and certain secreted proteins in the presence of cigarette smoke extract (CSE) and LPS were assessed via Western blot, ELISA and RT-PCR assays. In parallel, the effects of MSC paracrine factors on exposed epithelial cells were also investigated at gene and protein levels. When cultured on native 3D matrix, A549 cells obtain dual, type I- and II-like morphology. Exposure to CSE and LPS leads to downregulation of several epithelial proteins and suppressed proliferation rate. MSC medium added to the model restores proliferation rate and some of the epithelial proteins, i.e. e-cadherin and beta-catenin. CSE also increases secretion of pro-inflammatory cytokines by epithelial cells and upregulates transcription factor NFκB. Some of these effects might be counteracted by MSC in our model. We introduce repopulated decellularized lung matrix that highly resembles in vivo situation and is convenient for studies of disease pathogenesis, cytotoxicology and for exploring therapeutic strategies in the human lung context in vitro. MSC paracrine products have produced protecting effects in our model.

Sterilization of Lung Matrices by Supercritical Carbon Dioxide.

Lung engineering is a potential alternative to transplantation for patients with end-stage pulmonary failure. Two challenges critical to the successful development of an engineered lung developed from a decellularized scaffold include (i) the suppression of resident infectious bioburden in the lung matrix, and (ii) the ability to sterilize decellularized tissues while preserving the essential biological and mechanical features intact. To date, the majority of lungs are sterilized using high concentrations of peracetic acid (PAA) resulting in extracellular matrix (ECM) depletion. These mechanically altered tissues have little to no storage potential. In this study, we report a sterilizing technique using supercritical carbon dioxide (ScCO2) that can achieve a sterility assurance level 10(-6) in decellularized lung matrix. The effects of ScCO2 treatment on the histological, mechanical, and biochemical properties of the sterile decellularized lung were evaluated and compared with those of freshly decellularized lung matrix and with PAA-treated acellular lung. Exposure of the decellularized tissue to ScCO2 did not significantly alter tissue architecture, ECM content or organization (glycosaminoglycans, elastin, collagen, and laminin), observations of cell engraftment, or mechanical integrity of the tissue. Furthermore, these attributes of lung matrix did not change after 6 months in sterile buffer following sterilization with ScCO2, indicating that ScCO2 produces a matrix that is stable during storage. The current study's results indicate that ScCO2 can be used to sterilize acellular lung tissue while simultaneously preserving key biological components required for the function of the scaffold for regenerative medicine purposes.

Development of an ex vivo breast cancer lung colonization model utilizing a decellularized lung matrix.

The metastatic spread of cancer cells to distant sites represents the major cause of cancer-related deaths in breast cancer patients, and lungs are one of the most common sites for metastatic colonization. Developing a physiologically relevant tissue culture model to mimic lung colonization of breast cancer is crucial for the investigation of the biology of cancer metastasis and evaluation of drug treatment efficacy. Here, we describe an ex vivo lung colonization assay for breast cancer using the native three-dimensional (3D) lung extracellular matrix. The native matrix was isolated from murine lungs using a decellularization technique, and the preservation of extracellular matrix (ECM) composition, integrity and mechanical properties was confirmed. We showed that metastatic MDA-MB 231 and 4T1 cells invaded and colonized in the decellularized lung matrix, whereas only a small mass of non-metastatic MCF7 cells survived under the same condition. Furthermore, knockdown of ZEB1, an epithelial-mesenchymal transition (EMT) inducer, significantly reduced invasion and colonization of MDA-MB 231 cells in the decellularized lung, suggesting an important role of EMT in breast cancer metastasis. We conclude that the decellularized lung retains the biophysical and biochemical properties of the lung ECM and provides a powerful tool to investigate the lung colonization of breast cancer.

Enhanced Lung Epithelial Specification of Human Induced Pluripotent Stem Cells on Decellularized Lung Matrix

Whole-lung scaffolds can be created by perfusion decellularization of cadaveric donor lungs. The resulting matrices can then be recellularized to regenerate functional organs. This study evaluated the capacity of acellular lung scaffolds to support recellularization with lung progenitors derived from human induced pluripotent stem cells (iPSCs). Whole rat and human lungs were decellularized by constant-pressure perfusion with 0.1% sodium dodecyl sulfate solution. Resulting lung scaffolds were cryosectioned into slices or left intact. Human iPSCs were differentiated to definitive endoderm, anteriorized to a foregut fate, and then ventralized to a population expressing NK2 homeobox 1 (Nkx2.1). Cells were seeded onto slices and whole lungs, which were maintained under constant perfusion biomimetic culture. Lineage specification was assessed by quantitative polymerase chain reaction and immunofluorescent staining. Regenerated left lungs were transplanted in an orthotopic position. Activin-A treatment, followed by transforming growth factor-β inhibition, induced differentiation ofhuman iPSCs to anterior foregut endoderm as confirmed by forkhead box protein A2 (FOXA2), SRY (Sex Determining Region Y)-Box 17 (SOX17), and SOX2 expression. Cells cultured on decellularized lung slices demonstrated proliferation and lineage commitment after5 days. Cells expressing Nkx2.1 were identified at 40%to 60% efficiency. Within whole-lung scaffolds andunder perfusion culture, cells further upregulated Nkx2.1 expression. After orthotopic transplantation, grafts were perfused and ventilated by host vasculature and airways. Decellularized lung matrix supports the culture and lineage commitment of human iPSC-derived lung progenitor cells. Whole-organ scaffolds and biomimetic culture enable coseeding of iPSC-derived endothelial and epithelial progenitors and enhance early lung fate. Orthotopic transplantation may enable further invivo graft maturation.

A Nonhuman Primate Model of Lung Regeneration: Detergent-Mediated Decellularization and Initial In Vitro Recellularization with Mesenchymal Stem Cells

Currently, patients with end-stage lung disease are limited to lung transplantation as their only treatment option. Unfortunately, the lungs available for transplantation are few. Moreover, transplant recipients require life-long immune suppression to tolerate the transplanted lung. A promising alternative therapeutic strategy is decellularization of whole lungs, which permits the isolation of an intact scaffold comprised of innate extracellular matrix (ECM) that can theoretically be recellularized with autologous stem or progenitor cells to yield a functional lung. Nonhuman primates (NHP) provide a highly relevant preclinical model with which to assess the feasibility of recellularized lung scaffolds for human lung transplantation. Our laboratory has successfully accomplished lung decellularization and initial stem cell inoculation of the resulting ECM scaffold in an NHP model. Decellularization of normal adult rhesus macaque lungs as well as the biology of the resulting acellular matrix have been extensively characterized. Acellular NHP matrices retained the anatomical and ultrastructural properties of native lungs with minimal effect on the content, organization, and appearance of ECM components, including collagen types I and IV, laminin, fibronectin, and sulfated glycosaminoglycans (GAG), due to decellularization. Proteomics analysis showed enrichment of ECM proteins in total tissue extracts due to the removal of cells and cellular proteins by decellularization. Cellular DNA was effectively removed after decellularization (∼92% reduction), and the remaining nuclear material was found to be highly disorganized, very-low-molecular-weight fragments. Both bone marrow- and adipose-derived mesenchymal stem cells (MSC) attach to the decellularized lung matrix and can be maintained within this environment in vitro, suggesting that these cells may be promising candidates and useful tools for lung regeneration. Analysis of decellularized lung slice cultures to which MSC were seeded showed that the cells attached to the decellularized matrix, elongated, and proliferated in culture. Future investigations will focus on optimizing the recellularization of NHP lung scaffolds toward the goal of regenerating pulmonary tissue. Bringing this technology to eventual human clinical application will provide patients with an alternative therapeutic strategy as well as significantly reduce the demand for transplantable organs and patient wait-list time.

Development of a Decellularized Lung Bioreactor System for Bioengineering the Lung: The Matrix Reloaded

We developed a decellularized murine lung matrix bioreactor system that could be used to evaluate the potential of stem cells to regenerate lung tissue. Lungs from 2-3-month-old C57BL/6 female mice were excised en bloc with the trachea and heart, and decellularized with sequential solutions of distilled water, detergents, NaCl, and porcine pancreatic DNase. The remaining matrix was cannulated and suspended in small airway growth medium, attached to a ventilator to simulate normal, murine breathing-induced stretch. After 7 days in an incubator, lung matrices were analyzed histologically. Scanning electron microscopy and histochemical staining demonstrated that the pulmonary matrix was intact and that the geographic placement of the proximal and distal airways, alveoli and vessels, and the basement membrane of these structures all remained intact. Decellularization was confirmed by the absence of nuclear 4',6-diamidino-2-phenylindole staining and negative polymerase chain reaction for genomic DNA. Collagen content was maintained at normal levels. Elastin, laminin, and glycosaminglycans were also present, although at lower levels compared to nondecellularized lungs. The decellularized lung matrix bioreactor was capable of supporting growth of fetal alveolar type II cells. Analysis of day 7 cryosections of fetal-cell-injected lung matrices showed pro-Sp-C, cytokeratin 18, and 4',6-diamidino-2-phenylindole-positive cells lining alveolar areas that appeared to be attached to the matrix. These data illustrate the potential of using decellularized lungs as a natural three-dimensional bioengineering matrix as well as provide a model for the study of lung regeneration from pulmonary stem cells.

Transplantable lung graft from a decellularized lung matrix

Transplantable lung graft from a decellularized lung matrix