Cycling Stability Research Articles

Synergistic polarization engineering of dielectric towards low-voltage high-mobility solution-processed ultraflexible organic transistors

The emerging wearable skin-like electronics require the ultra-flexible organic transistor to operate at low voltage for electrical safety and energy efficiency and simultaneously enable high field-effect mobility to ensure the carrier migration ability and the switching speed of circuits. However, the currently reported low-voltage organic transistors generally present low mobility, originating from the trade-off between molecular polarity and surface polarity of the dielectrics. In this work, the orientation polarization of the dielectric is enhanced by introducing a flexible quaternary ammonium side chain, and the surface polarity is weakened by the shielding effect of the nonpolar methyl groups on the polar nitrogen atom. The resulting antisolvent QPSU dielectric enables the high-dielectric constant up to 18.8 and the low surface polarity with the polar component of surface energy only at 2.09 mJ/m2. Such a synergistic polarization engineering between orientation polarization and surface polarity makes the solution-processed ultraflexible transistors present the ultralow operational voltage down to −3 V, the ultrahigh charge-carrier mobility up to 8.28 cm2 V−1 s−1 at 1 Hz, excellent cyclic operational stability and long-term air stability. These results combined with the ultrathin thickness of transistor as low as 135 nm, the ultralight mass of 0.5 g/m2, the conformal adherence capability on human skin and 1-μm blade edge, and the strong mechanical robustness with stable electrical properties for 30,000 bending cycles, open up an available strategy to successfully realize low-voltage high-mobility solution-processed organic transistor, and presents the potential application of QPSU dielectric for the next-generation wearable imperceptible skin-like electronics.

Manipulating 2D Membrane Interlayer Channels with Accelerated Mass-Transfer Behavior to Boost Solar Desalination.

The scarcity of fresh water necessitates sustainable and efficient water desalination strategies. Solar-driven steam generation (SSG), which employs solar energy for water evaporation, has emerged as a promising approach. Graphene oxide (GO)-based membranes possess advantages like capillary action and Marangoni effect, but their stacking defects and dead zones of flexible flakes hinders efficient water transportation, thus the evaporation rate lag behind unobstructed-porous 3D evaporators. Therefore, fundamental mass-transfer approach for optimizing SSG evaporators offers new horizons. Herein, a universal multi-force-fields-based method is presented to regularize membrane channels, which can mechanically eliminate inherent interlayer stackings and defects. Both characterization and simulation demonstrate the effectiveness of this approach across different scales and explain the intrinsic mechanism of mass-transfer enhancement. When combined with a structurally optimized substrate, the 4Laponite@GO-1 achieves evaporation rate of 2.782kg m-2 h-1 with 94.48% evaporation efficiency, which is comparable with most 3D evaporators. Moreover, the optimized membrane exhibits excellent cycling stability (10 days) and tolerance to extreme conditions (pH 1-14, salinity 1%-15%), verifies the robust structural stability of regularized channels. This optimization strategy provides simple but efficient way to enhance the SSG performance of GO-based membranes, facilitating their extensive application in sustainable water purification technologies.

Electro‐Induced Self‐Reduction TiO2 in Viologen‐Based Ionogels for Multi‐Color Electrochromic Displays

AbstractReflective electrochromic (EC) technology is expected to e‐paper display field, and integrating optical reflective electrolyte as the optical reflective layer is a common strategy for constructing reflective EC devices. Compositing inorganic particles and electrolytes is one of the simplest and most efficient composite methods, but these composite electrolytes usually cannot perform well together in terms of both optical and electrochemical properties. Herein, the TiO2 nanoparticles are added to the ethyl viologen‐based ionogel (T‐EVG, one typical kind of EC/electrolyte) to have the highest visible light reflectivity and the best electrochemical performance compared with SiO2, Al2O3, and ZnO nanoparticles, which is attributed to the electro‐induced self‐reduction TiO2 produced in T‐EVG during EC cycling. Meanwhile, the corresponding EC devices can display red, green, and blue, and have high optical contrast (CIE Lab: ΔE>38), fast switching spend (<4 s, the fastest is 5 Hz), ultra‐low power density (<4.0 mW cm−2), and excellent cycling stability (>85% retained after 10 000 cycles). Finally, a simple 3×3 pixelated EC display array is prepared, and single‐ and multi‐point (including diagonal points) multi‐color display effects are realized through active‐matrix driving and high‐frequency refresh, demonstrating its application value in the high‐performance e‐paper display.

3D-engineered WO3 microspheres assembled by 2D nanosheets with superior sodium storage capacity.

Because of the inadequate sodium storage capacity of graphite, the exploration of high-performance SIB anodes is a crucial step forward. Herein, we report the hydrothermally synthesized self-assembled interconnected nanosheets of WO3 microspheres possessing admirable sodium storage in terms of cycling stability and acceptable rate capability. Benefitting from the interconnected nature of the nanosheets with a hollow interior, the WO3 microspheres exhibited a high sodiation capacity of 431 mA h g-1 at 100 mA g-1 and an excellent rate performance of 60 mA h g-1 at 500 mA g-1 with an impressive coulombic efficiency of around 99%. Importantly, even after continuous cycling with increasing current densities, a specific capacity as high as 220 mA h g-1 could be recovered at a current density of 50 mA g-1, suggesting excellent sodium storage reversibility.

Gas-Phase-Induced Engineering for Fabrication of 3D Hierarchical Porous Nickel and Its Application toward High-Performance Supercapacitors.

Commercial nickel foam (NF), which is composed of numerous interconnected ligaments and hundred-micron pores, is widely acknowledged as a current collector/electrode material for catalysis, sensing, and energy storage applications. However, the commonly used NF often does not work satisfactorily due to its smooth surface and hollow structure of the ligaments. Herein, a gas-phase-induced engineering, two-step gaseous oxidation-reduction (GOR) is presented to directly transform the thin-walled hollow ligament of NF into a three-dimensional (3D) nanoporous prism structure, resulting in the fabrication of a unique hierarchical porous nickel foam (HPNF). This 3D nanoporous architecture is achieved by utilizing the spontaneous reconstruction of nickel atoms during volume expansion and contraction in the GOR process. The process avoids the involution of acid-base corrosion and sacrificial components, which are facile, environmentally friendly, and suitable for large-scale fabrication. Furthermore, MnO2 is electrochemically deposited on the HPNF to form a supercapacitor electrode (HPNF/MnO2). Because of the fully open structure for ion transport, superhydrophilic properties, and the increased contact area between MnO2 and the current collector, the HPNF/MnO2 electrode exhibits a high specific capacitance of 997.5 F g-1 at 3 A g-1 and remarkable cycling stability with 99.6% capacitance retention after 20000 cycles in 0.1 M Na2SO4 electrolyte, outperforming most MnO2-based supercapacitor electrodes.

Stabilizing High-Voltage Performance of Nickel-Rich Cathodes via Facile Solvothermally Synthesized Niobium-Doped Strontium Titanate.

Ni-rich layered ternary cathodes are promising candidates thanks to their low toxic Co-content and high energy density (∼800 Wh/kg). However, a critical challenge in developing Ni-rich cathodes is to improve cyclic stability, especially under high voltage (>4.3 V), which directly affects the performance and lifespan of the battery. In this study, niobium-doped strontium titanate (Nb-STO) is successfully synthesized via a facile solvothermal method and used as a surface modification layer onto the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. The results exhibited that the Nb-STO modification significantly improved the cycling stability of the cathode material even under high-voltage (4.5 V) operational conditions. In particular, the best sample in our work could provide a high discharge capacity of ∼190 mAh/g after 100 cycles under 1 C with capacity retention over 84% in the voltage range of 3.0-4.5 V, superior to the pristine NCM811 (∼61%) and pure STO modified STO-811-600 (∼76%) samples under the same conditions. The improved electrochemical performance and stability of NCM811 under high voltage should be attributed to not only preventing the dissolution of the transition metals, further reducing the electrolyte's degradation by the end of charge, but also alleviating the internal resistance growth from uncontrollable cathode-electrolyte interface (CEI) evolution. These findings suggest that the as-synthesized STO with an optimized Nb-doping ratio could be a promising candidate for stabilizing Ni-rich cathode materials to facilitate the widespread commercialization of Ni-rich cathodes in modern LIBs.

Centrifugal-Gravity-Enforced Deposition of MXene Electrodes for High-Performance and Ultrastable Microsupercapacitors.

Two-dimensional (2D) transition metal carbides, known as MXenes, have captured much attention for their excellent electrical conductivity and electrochemical capability. However, the susceptibility of MXenes to oxidation, particularly Ti3C2Tx transforming into titanium dioxide upon exposure to ambient air, hinders their utilization for extended operational life cycles. This work introduces a simple and straightforward method for producing ultrathin MXene electrode films tailored for energy storage applications, employing centrifugal-gravity force. Our approach significantly suppresses the oxidation phenomenon that arises in MXene materials and also effectively prevents the recrystallization of potentially residual LiF during the film formation. Additionally, the utilization of this MXene electrode in an all-solid-state microsupercapacitor (MSC) with an interdigitated pattern demonstrates an exceptionally improved and stable electrochemical performance. This includes a high volumetric capacitance of approximately 467 F cm-3, an energy density of around 65 mWh cm-3, and impressive long-term cycle stability, retaining about 94% capacity after 10 000 cycles. Moreover, a downsized MSC device exhibits remarkable mechanical durability, retaining over 98% capacity even when folded and sustaining stability over extended periods. Therefore, we believe that this study provides valuable insights for advancing highly integrated energy storage devices, ensuring exceptional electrochemical efficiency and prolonged functionality in diverse environments, whether ambient or humid.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

LiCl in situ decorated metal-organic framework (MOF)-derived porous carbon for efficient solar-driven atmospheric water harvesting.

Solar-powered sorption-based atmospheric water harvesting (AWH) technology is a promising solution to the freshwater scarcity in arid regions. Existing adsorbent materials still face challenges in aspects such as cycling stability and adsorption kinetics and require further development. Herein, we presented a strategy for the in situ fabrication of high-performance adsorbents, lithium chloride (LiCl)-decorated metal-organic framework (MOF)-derived porous carbon sorbents (PCl), via high-temperature pyrolysis and hydrogen chloride (HCl) vapor treatment. The sorbents display high adsorption capacity across a wide range of humidity water adsorption capacities in a wide humidity range with the maximum adsorption capacity of 7.87 g g-1, and rapid response to the solar-driven process and excellent cyclic stability. The LiCl nanocrystals in PCl can be utilized efficiently and decorated within the porous framework stably, and demonstrate water adsorption at 20%, 40%, 60% and 80% RH, of 1.34, 1.69, 2.56 and 4.23 gH2O·gLiCl-1, respectively, and significantly higher water uptake and release rates than bulk LiCl. This may provide new guides for designing efficient solar-driven AWH.

MnO2 superstructure cathode with boosted zinc ion intercalation for aqueous zinc ion batteries

The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.

Deciphering the storage mechanism of biochar anchored with different morphology Mn3O4 as advanced anode material for lithium-ion batteries

Biochar is regarded as a promising lithium-ion batteries anode material, owing to its high cost-effectiveness. However, the poor specific capacity and cycling stability have limited its practical applications. A straightforward and cost-efficient solvothermal method is presented for synthesizing Mn3O4/biochar composites in this study. By adjusting solvothermal temperatures, Mn3O4 with different morphology is prepared and anchored on the biochar surface (MKAC-T) to improve the electrochemical performance. Due to the morphological effect of nanospherical Mn3O4 on the biochar surface, the MKAC-180 anode material demonstrates outstanding reversible capacity (992.5 mAh/g at 0.2 A/g), significant initial coulombic efficiency (61.1 %), stable cycling life (605.3 mAh/g at 1.0 A/g after 1000 cycles), and excellent rate performance (385.8 mAh/g at 1.6 A/g). Moreover, electro-kinetic analysis and ex-situ physicochemical characterizations are employed to illustrate the charge storage mechanisms of MKAC-180 anode. This study provides valuable insights into the “structure–activity relationship” between Mn3O4 microstructure and electrochemical performance for the Mn3O4/biochar composites, illuminating the industrial utilization of biomass carbon anode materials.

Mixed polyanionic NaFe1.6V0.4(PO4)(SO4)2@CNT cathode for sodium-ion batteries: Electrochemical diffusion kinetics and distribution of relaxation time analysis at different temperatures

We report the electrochemical sodium-ion kinetics and distribution of relaxation time (DRT) analysis of a newly designed mixed polyanionic NaFe1.6V0.4(PO4)(SO4)2@CNT composite as a cathode. The specific capacity of 104 mAhg−1 is observed at 0.1 C with the average working voltage of ∼3 V. Intriguingly, a remarkable rate capability and reversibility are demonstrated up to very high current rate of 25 C. The long cycling test up to 10 C shows high capacity retention even after 2000 cycles. The detailed analysis of galvanostatic intermittent titration technique (GITT) and cyclic voltammetry (CV) data reveal the diffusion coefficient of 10−8–10−11 cm2s−1. We find excellent stability in the thermal testing between 25–55 °C temperatures and 80% capacity retention up to 100 cycles at 5 C. Further, we analyze the individual electrochemical processes in the time domain using the novel DRT technique at different temperatures. The ex-situ investigation shows the stable and reversible structure, morphology and electronic states of the long cycled cathode material. More importantly, we demonstrate relatively high specific energy of ≈155 Wh kg−1 (considering the total active material loading of both the electrodes) at 0.2 C for full cell battery having excellent rate capability up to 10 C and long cyclic stability at 1 C.

Enhancing Carbon Fiber Fabrics with ALD AlxOy Coatings: An Investigation of Thickness Effects on Weight, Morphology, Coloration, and Thermal Properties

This study explores the impact of non-stoichiometric aluminum oxide (AlxOy) coatings applied via thermal atomic layer deposition (ALD) on carbon fiber fabrics (CFFs), emphasizing volume per cycle, FESEM analyses, color transitions, and thermal stability enhancements. Using trimethylaluminum and water at 100 °C, AlxOy was deposited across a range of 1000 to 5000 ALD cycles, with film thicknesses extending up to 500 nm. This notable increase in the volume of material deposited per cycle was observed for the 3D CFFs, highlighting ALD’s capability to coat complex structures effectively. FESEM analyses revealed the morphological evolution of CFF surfaces post-coating, showing a transition from individual grains to a dense, continuous layer as ALD cycles increased. This morphological transformation led to significant color shifts from green to red to blue, attributed to structural coloration effects arising from variations in film thickness and surface morphology. Thermogravimetric analyses (TGA and dTG) indicated that the AlxOy coatings enhanced the thermal stability of CFFs, with a postponement in degradation onset observed in samples subjected to more ALD cycles. In essence, this research highlights the nuanced relationship between ALD processing parameters and their collective influence on both the aesthetic and functional properties of CFFs. This study illustrates ALD’s potential in customizing CFFs for applications requiring specific color and thermal resilience, balancing the discussion between the surface morphological changes and their implications for color and thermal behavior.

Superfast Zincophilic Ion Conductor Enables Rapid Interfacial Desolvation Kinetics for Low‐Temperature Zinc Metal Batteries

AbstractLow‐temperature rechargeable aqueous zinc metal batteries (AZMBs) as highly promising candidates for energy storage are largely hindered by huge desolvation energy barriers and depressive Zn2+ migration kinetics. In this work, a superfast zincophilic ion conductor of layered zinc silicate nanosheet (LZS) is constructed on a metallic Zn surface, as an artificial layer and ion diffusion accelerator. The experimental and simulation results reveal the zincophilic ability and layer structure of LZS not only promote the desolvation kinetics of [Zn(H2O)6]2+ but also accelerate the Zn2+ transport kinetics across the anode/electrolyte interface, guiding uniform Zn deposition. Benefiting from these features, the LZS‐modified Zn anodes showcase long‐time stability (over 3300 h) and high Coulombic efficiency with ≈99.8% at 2 mA cm−2, respectively. Even reducing the environment temperature down to 0 °C, ultralong cycling stability up to 3600 h and a distinguished rate performance are realized. Consequently, the assembled Zn@LZS//V2O5‐x full cells deliver superior cyclic stability (344.5 mAh g−1 after 200 cycles at 1 A g−1) and rate capability (285.3 mAh g−1 at 10 A g−1) together with a low self‐discharge rate, highlighting the bright future of low‐temperature AZMBs.

LiF‐Rich Solid Electrolyte Interfaces Guarantee the Cycle Stability of Metal‐Organic Frameworks for Lithium Storage

Metal‐organic framework materials (MOFs) with hierarchical porosity, structural tunability, and rich redox‐active centers have attracted intensive attention as potential substitutes for carbonaceous anode materials. However, the practical commercialization of MOFs still remains a challenge, due to uncontrollable performance degradation. Inspired by the prolonged lifespans of traditional anode materials with LiF‐rich solid electrolyte interface (SEI), the roles of LiF are examined in enhancing the cycle stability of MOFs, with copper benzenedicarboxylate (Cu‐BDC) as an example. By adjusting the electrolyte composition, the cycle performance of Cu‐BDC material is optimized, due to the generation of LiF‐rich SEI. In the optimal 3 M LiPF6 electrolyte, the formed SEI membrane is the thinnest, and the LiF content is the highest, so the Cu‐BDC shows a specific charge/discharge capacity of 378/387.2 mAh g−1 after 100 cycles at 100 mA g−1, comparing to less than 200 mAh g−1 in the electrolyte with 1% vinyl carbonate.

Cellulose-based separator woven by double-layer-configuration fibers for high S-load Li-S batteries

Lithium-sulfur (Li-S) battery with high theoretical energy density, has been the most promising next-generation energy storage devices. However, the capacity of the high S-loaded cathode decays rapidly due to the shuttling of soluble polysulfide intermediates between the two electrodes, which seriously inhibits its development. In this work, polyacrylonitrile (PAN) and cellulose composite film (PAN@CE) is designed, which is woven by double-layer configuration fiber. The outer layer of fiber is mainly composed of cellulose, and the inner layer is mainly PAN. From DFT calculations and experiments, the double-layer configuration enriched with nitrogen and oxygen groups can effectively inhibit the shuttle of soluble polysulfides. Meanwhile, the interlaced network structure of PAN@CE improves the electrolyte wettability and provides abundance transport paths for ions. In addition, the film also has good thermal stability. Hence, the cycling stability of Li-S batteries with PAN@CE as separator has been greatly improved. Cellulose-based Li-S battery with 9.1 mg S loading and an E/S ratio of 6.2 μL mg−1 is assembled. Its initial area capacity is 5.67 mAh cm−2. After 200 long cycles, the area capacity keeps above 4.0 mAh cm−2.

In Situ Construction of a Multifunctional Interphase Enabling Continuous Capture of Unstable Lattice Oxygen Under Ultrahigh Voltages.

The use of nickel-rich layered materials as cathodes can boost the energy density of lithium batteries. However, developing a safe and long-term stable nickel-rich layered cathode is challenging primarily due to the release of lattice oxygen from the cathode during cycling, especially at high voltages, which will cause a series of adverse effects, leading to battery failure and thermal runaway. Surface coating is often considered effective in capturing active oxygen species; however, its process is rather complicated, and it is difficult to maintain intact on the cathode with large volume changes during cycling. Here, we propose an in situ construction of a multifunctional cathode/electrolyte interphase (CEI), which is easy to prepare, repairable, and, most importantly, capable of continuously capturing active oxygen species during the entire life span. This unique protective mechanism notably improves the cycling stability of Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) cells at rigorous working conditions, including ultrahigh voltage (4.8 V), high temperature (60 °C), and fast charging (10 C). An industrial 1 A h graphite||NCM811 pouch cell achieved stable operation of 600 cycles with a capacity retention of 79.6% at 4.4 V, exhibiting great potential for practical use. This work provides insightful guidance for constructing a multifunctional CEI to bypass limitations associated with high-voltage operations of nickel-rich layered cathodes.

Constructing sulfur-rich interphase to promote the cycle stability of graphite/LiNi0.8Co0.1Mn0.1O2 pouch battery at elevated temperature

Lithium-ion batteries (LIBs) with LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes have a high energy density, but their long-cycle performance, especially at high temperature, should still be improved due to the instability of the NCM811 cathode-electrolyte interphase. In this work, 2, 2, 2-Trifluoroethyl p-Toluenesulfonate (TPTS) is introduced as a functional film-forming electrolyte additive design to improve the long-term stability of graphite/NCM811 batteries. The preferential redox reactions of TPTS molecules play a pivotal role in fostering the creation of a sulfur-riched interphase, characterized by low impedance. This interphase works to fortify the interfacial structure, effectively inhibiting the dissolution of transition metal ions. Therefore, in comparison to the graphite/NCM811 pouch batteries lacking additive, TPTS enhance the long-cycle capacity retention from 47 % to 80 % after 450 cycles at 45 °C. What's more, TPTS suppresses outgassing and demonstrates enhanced capacity maintenance for the battery even after storage at 60 °C. This work not only demonstrates the stabilizing impacts of TPTS on the electrode-electrolyte interphase and its enhancement of cycling performance at elevated temperatures but also introduces a novel approach for the practical utilization of functional electrolytes matching high-nickel LIBs.

Organic Electrode Materials for Energy Storage and Conversion: Mechanism, Characteristics, and Applications.

ConspectusLithium ion batteries (LIBs) with inorganic intercalation compounds as electrode active materials have become an indispensable part of human life. However, the rapid increase in their annual production raises concerns about limited mineral reserves and related environmental issues. Therefore, organic electrode materials (OEMs) for rechargeable batteries have once again come into the focus of researchers because of their design flexibility, sustainability, and environmental compatibility. Compared with conventional inorganic cathode materials for Li ion batteries, OEMs possess some unique characteristics including flexible molecular structure, weak intermolecular interaction, being highly soluble in electrolytes, and moderate electrochemical potentials. These unique characteristics make OEMs suitable for applications in multivalent ion batteries, low-temperature batteries, redox flow batteries, and decoupled water electrolysis. Specifically, the flexible molecular structure and weak intermolecular interaction of OEMs make multivalent ions easily accessible to the redox sites of OEMs and facilitate the desolvation process on the redox site, thus improving the low-temperature performance, while the highly soluble nature enables OEMs as redox couples for aqueous redox flow batteries. Finally, the moderate electrochemical potential and reversible proton storage and release of OEMs make them suitable as redox mediators for water electrolysis. Over the past ten years, although various new OEMs have been developed for Li-organic batteries, Na-organic batteries, Zn-organic batteries, and other battery systems, batteries with OEMs still face many challenges, such as poor cycle stability, inferior energy density, and limited rate capability. Therefore, previous reviews of OEMs mainly focused on organic molecular design for organic batteries or strategies to improve the electrochemical performance of OEMs. A comprehensive review to explore the characteristics of OEMs and establish the correlation between these characteristics and their specific application in energy storage and conversion is still lacking.In this Account, we initially provide an overview of the sustainability and environmental friendliness of OEMs for energy storage and conversion. Subsequently, we summarize the charge storage mechanisms of the different types of OEMs. Thereafter, we explore the characteristics of OEMs in comparison with conventional inorganic intercalation compounds including their structural flexibility, high solubility in the electrolyte, and appropriate electrochemical potential in order to establish the correlations between their characteristics and potential applications. Unlike previous reviews that mainly introduce the electrochemical performance progress of different organic batteries, this Account specifically focuses on some exceptional applications of OEMs corresponding to the characteristics of organic electrode materials in energy storage and conversion, as previously published by our groups. These applications include monovalent ion batteries, multivalent ion batteries, low-temperature batteries, redox flow batteries with soluble OEMs, and decoupled water electrolysis employing organic electrodes as redox mediators. We hope that this Account will make an invaluable contribution to the development of organic electrode materials for next-generation batteries and help to unlock a world of potential energy storage applications.

Bond Structure Engineering Induced the Mn Redox Stabilization Toward High‐Energy Mn‐Based Phosphate Cathode

AbstractManganese (Mn) ‐based phosphate is poised for commercial applications driven by its cost‐effectiveness, robust NASICON framework, and multi‐dimensional Na+ pathways. However, it encounters insufficient redox reactions and rapid structural collapse with severe lattice distortion as the culprit. Herein, one meticulously engineered substitutional solid solution cathode (integrating Na4MnCr(PO4)3 and Na3MnTi(PO4)3, denoted NMCTP) is proposed to regulate the local crystal structure of Mn─O bond to stabilize and promote the Mn redox reaction for optimizing the electrochemical performance. It is uncovered that the bulk framework with structural stability is constructed by strongly symmetric Mn─O bond lengths of MnO6 octahedrons and strengthened Mn─O covalency. In addition, the sufficient utilization of Mn redox is tightly correlated with redistributed Na2 occupancy and enhanced diffusion kinetics with accelerated electron transportation. By virtue of the above merits, The NMCTP performs ultra‐high capacity (150.3 mAh g−1 at 0.1 C) and appealing cycling stability (84.7% retention over 1000 cycles). Sodium storage mechanisms and potential factors at high potentials are unveiled in NMCTP materials. This work sheds light on fire‐new solid solution strengthening in view of the Mn─O bond structure for high‐performance Mn‐based phosphate cathodes.