Cyclic Conformation Research Articles

Total Synthesis of Talarolide A and atrop-Talarolide A: Hydroxamate H-Bond Bridge Stabilization of Cyclic Peptide Conformers Invokes Non-Canonical Atropisomerism.

The first total synthesis of the Australian marine tunicate fungus-derived cyclic peptide talarolide A (1) has confirmed the structure previously proposed on the basis of spectroscopic and chemical analyses and re-affirmed the importance of the unique hydroxamate H-bond bridge in ring conformer stabilization. The unexpected co-synthesis of atrop-talarolide A (8) revealed, for the first time, that hydroxamate H-bond bridging in the talarolide framework invokes non-canonical atropisomerism and that talarolides A (1), C (3), and D (4) all exist naturally as atropisomers. These discoveries raise the intriguing prospect that comparable functionalisation of other cyclic peptides, including those with commercial value, could provide ready access to new "unnatural atropisomeric" chemical space, with new and/or improved chemical and biological properties.

One-Step Catalyst-Transfer Macrocyclization: Expanding the Chemical Space of Azaparacyclophanes.

In this paper, we report on a one-step catalyst-transfer macrocyclization (CTM) reaction, based on the Pd-catalyzed Buchwald-Hartwig cross-coupling reaction, selectively affording only cyclic structures. This route offers a versatile and efficient approach to synthesize aza[1n]paracyclophanes (APCs) featuring diverse functionalities and lumens. The method operates at mild reaction temperatures (40 °C) and short reaction times (∼2 h), delivering excellent isolated yields (>75% macrocycles) and up to 30% of a 6-membered cyclophane, all under nonhigh-dilution concentrations (35-350 mM). Structural insights into APCs reveal variations in product distribution based on different endocyclic substituents, with steric properties of exocyclic substituents having minimal influence on the macrocyclization. Aryl-type endocyclic substituents predominantly yield 6-membered macrocycles, while polycyclic aromatic units such as fluorene and carbazole favor 4-membered species. Experimental and computational studies support a proposed mechanism of ring-walking catalyst transfer that promotes the macrocycle formation. It has been found that the macrocyclization is driven by the formation of cyclic conformers during the oligomerization step favoring an intramolecular C-N bond formation that, depending on the cycle size, hinges on either preorganization effect or kinetic increase of the reductive elimination step or a combination of the two. The CTM process exhibits a "living" behavior, facilitating sequential synthesis of other macrocycles by introducing relevant monomers, thus providing a practical synthetic platform for chemical libraries. Notably, CTM operates both under diluted and concentrated regimes, offering scalability potential, unlike typical macrocyclization reactions usually operating in the 0.1-1 mM range.

Discovering trends in the Lewis acidity of beryllium and magnesium hydrides and fluorides with increasing clusters size.

We have reported in the last years the strong effect that Be- and Mg-containing Lewis acids have on the intrinsic properties of typical bases, which become acids upon complexation. In an effort to investigate these changes when the Be and Mg derivatives form clusters of increasing size, we have examined the behavior of the (MX2)n (M = Be, Mg; X = H, F; n = 1, 2, 3) clusters when they interact with ammonia, methanimine, hydrogen cyanide and pyridine, and with their corresponding deprotonated forms. The complexes obtained at the M06-2X/aug-cc-pVTZ level were analyzed using the MBIE energy decomposition formalism, in parallel with QTAIM, ELF, NCIPLOT and AdNDP analyses of their electron density. For n = 1 the interaction enthalpy for the different families of monomers, Be (Mg) hydrides and Be (Mg) fluorides, follows the same trend as the intrinsic basicity of the base that interacts with them. This interaction is greatly reinforced after the deprotonation of the base, resulting in a significant enhancement of the intrinsic acidity of the corresponding MX2-Base complex. For (MX2)2 clusters a further reinforcement of the interaction with the base is observed, this reinforcement being again larger for the deprotonated complexes. However, the concomitant increase of their intrinsic acidity is one order of magnitude larger for hydrides than for fluorides. Unexpectedly, the cyclic conformers (MX2)3, which are more unstable than the linear ones, become the global minima after association with the base and the same is true for the deprotonated complex. Accordingly, a further increase of the intrinsic acidity of the (MX2)3-Base complexes with respect to the (MX2)2-Base ones is observed. This effect is maximum for (MgF2)3 clusters, to the point that the (MgF2)3-Base complexes become more acidic than nitric acid, the extreme case being the cluster (MgF2)3-NCH, whose acidity is higher than that of perchloric acid.

Discovery of Novel 11-Membered Templates as Squalene Synthase Inhibitors.

Squalene synthase is one of the most promising pharmaceutical targets to treat hyperlipidemia. Inhibition of the squalene synthase causes a decrease in the hepatic cholesterol concentration. We have already reported the design and synthesis of highly potent benzhydrol-type squalene inhibitors. Although these templates showed unique and potent cyclic active conformations via intramolecular hydrogen bonds, the in vivo cholesterol-lowering efficacy was insufficient. We attempted to improve their potential as an orally active medicine. In our medicinal chemistry effort, cyclized 11-membered ring templates were acquired. The novel series of compounds exhibited potent squalene synthase inhibitory activity, and one of the derivatives, isomer A-(1S, 3R)-14i, showed plasma lipid-lowering efficacy in hamster and marmoset repeated-dose studies. Our findings provide valuable insights into the design and development of novel and unique 11-membered ring-type highly potent squalene synthase inhibitors.

Sculpting Secondary Structure of a Cyclic Peptide: Conformational Analysis of a Cyclic Hexapeptide Containing a Combination of l-Leu, d-Leu, and Aib Residues.

We have previously reported that cyclo(l-Leu-d-Leu-Aib-l-Leu-d-Leu-Aib) (2), a cyclic hexapeptide consisting of heterochiral l-Leu and d-Leu (l-Leu-d-Leu) residues with achiral 2-aminoisobutyric acid (Aib) residues, forms a figure-8 conformation. In this study, we newly designed cyclo(l-Leu-d-Leu-Aib-d-Leu-l-Leu-Aib)+ (4), an epimer of 2, and examined the conformational differences between 2 and 4 by X-ray crystallographic analysis. Peptide 4 formed a planar cyclic conformation with an antiparallel β-sheet hydrogen-bonding pattern. This investigation demonstrates the potential to manipulate the molecular conformation of cyclic peptides by simply arranging the l- and d-amino acids and emphasizes that diverse conformations can be obtained by using cyclic peptides. Harnessing cyclic peptides as platforms for distinct molecular structures is a promising approach to expanding the chemical space for various applications.

Modulation of the Gut Microbiota by the Plantaricin-Producing Lactiplantibacillus plantarum D13, Analysed in the DSS-Induced Colitis Mouse Model.

Lactiplantibacillus plantarum D13 shows antistaphylococcal and antilisterial activity, probably due to the synthesis of a presumptive bacteriocin with antibiofilm capacity released in the cell-free supernatant (CFS), whose inhibitory effect is enhanced by cocultivation with susceptible strains. An in silico analysis of the genome of strain D13 confirmed the pln gene cluster. Genes associated with plantaricin biosynthesis, structure, transport, antimicrobial activity, and immunity of strain D13 were identified. Furthermore, the predicted homology-based 3D structures of the cyclic conformation of PlnE, PlnF, PlnJ, and PlnK revealed that PlnE and PlnK contain two helices, while PlnF and PlnJ contain one and two helices, respectively. The potential of the strain to modulate the intestinal microbiota in healthy or dextran sulphate sodium (DSS)-induced colitis mouse models was also investigated. Strain D13 decreased the disease activity index (DAI) and altered the gut microbiota of mice with DSS-induced colitis by increasing the ratio of beneficial microbial species (Allobaculum, Barnesiella) and decreasing those associated with inflammatory bowel disease (Candidatus Saccharimonas). This suggests that strain D13 helps to restore the gut microbiota after DSS-induced colitis, indicating its potential for further investigation as a probiotic strain for the prevention and treatment of colitis.

Is triple crossed C28 cyclic polyyne cluster a stable conformation?

Polyynes sometimes referred to as oligoynes or carbinoids, and their resonance cumulene form are valuable precursors to a whole series of more complex organic derivatives. Motivated by a series of studies that explore the stabilization of polyynes, in different ways, the possibility of their stabilization through the formation of crossed cycles is explored in this article. It is easy to notice that the cyclic conformations represent a special case, in that they possess an increased symmetry. The stability of the polyene molecule can be enhanced by building cross-clusters. In this article, the molecular modeling tools were employed in order to provide insights about the construction and stability of 3C28 triple crossed C28 cyclic polyyne cluster. It has been shown that C28 and 3C28 triple crossed C28 are very similar energetically. HOMO–LUMO gap suggests a metallic conductivity. The angles between the planes of the molecular rings shows almost an axial alignment of the rings. A symmetry-constrained optimization was conducted using Z-matrix internal coordinates and Gaussian software, and it revealed that the geometrical conformation of C28 polyyne as triple crossed cluster is a stable conformation, since in all investigated scenarios the convergence is assured and it is to nearly optimum local points.

Talarolides Revisited: Cyclic Heptapeptides from an Australian Marine Tunicate-Associated Fungus, Talaromyces sp. CMB-TU011.

Application of a miniaturized 24-well plate system for cultivation profiling (MATRIX) permitted optimization of the cultivation conditions for the marine-derived fungus Talaromyces sp. CMB-TU011, facilitating access to the rare cycloheptapeptide talarolide A (1) along with three new analogues, B-D (2-4). Detailed spectroscopic analysis supported by Marfey's analysis methodology was refined to resolve N-Me-l-Ala from N-Me-d-Ala, l-allo-Ile from l-Ile and l-Leu, and partial and total syntheses of 2, and permitted unambiguous assignment of structures for 1 (revised) and 2-4. Consideration of diagnostic ROESY correlations for the hydroxamates 1 and 3-4, and a calculated solution structure for 1, revealed how cross-ring H-bonding to the hydroxamate moiety influences (defines/stabilizes) the cyclic peptide conformation. Such knowledge draws attention to the prospect that hydroxamates may be used as molecular bridges to access new cyclic peptide conformations, offering the prospect of new biological properties, including enhanced oral bioavailability.

The cooperative effect of HX (X = Br, F) acids in CH3SH clusters

In this study, the cooperative effect of clusters of HBr, HF and CH3SH was investigated. Therefore, (HX)n…(CH3SH)m, (X = Br, F; n, m = 1, 2) clusters were calculated using B3LYP at DFT level and aug-cc-pVDZ and aug-cc-pVTZ basis sets at MP2 level.Structures, energies and infrared vibrational frequencies are all used to discuss the results in this study. It was observed that the cooperative effect makes a significant contribution to the total interaction energies of the cyclic conformers of (HX)n…(CH3SH)m. In addition, it was determined that the double addition potential cannot be neglected in the simulations where it is applied. Tetramer complexes were studied to evaluate behavior in the presence of larger clusters. Furthermore, thermodynamic parameters were calculated for each cluster examined.These results show that the sulfur's hydrogen bond accepting ability increases further in the presence of HBr, HF and exhibits hydrogen bonding behavior in the clusters.

An Inherent Difference between Serine and Threonine Phosphorylation: Phosphothreonine Strongly Prefers a Highly Ordered, Compact, Cyclic Conformation.

Phosphorylation and dephosphorylation of proteins by kinases and phosphatases are central to cellular responses and function. The structural effects of serine and threonine phosphorylation were examined in peptides and in proteins, by circular dichroism, NMR spectroscopy, bioinformatics analysis of the PDB, small-molecule X-ray crystallography, and computational investigations. Phosphorylation of both serine and threonine residues induces substantial conformational restriction in their physiologically more important dianionic forms. Threonine exhibits a particularly strong disorder-to-order transition upon phosphorylation, with dianionic phosphothreonine preferentially adopting a cyclic conformation with restricted ϕ (ϕ ∼ -60°) stabilized by three noncovalent interactions: a strong intraresidue phosphate-amide hydrogen bond, an n → π* interaction between consecutive carbonyls, and an n → σ* interaction between the phosphate Oγ lone pair and the antibonding orbital of C-Hβ that restricts the χ2 side-chain conformation. Proline is unique among the canonical amino acids for its covalent cyclization on the backbone. Phosphothreonine can mimic proline's backbone cyclization via noncovalent interactions. The preferred torsions of dianionic phosphothreonine are ϕ,ψ = polyproline II helix > α-helix (ϕ ∼ -60°); χ1 = g-; χ2 ∼ +115° (eclipsed C-H/O-P bonds). This structural signature is observed in diverse proteins, including in the activation loops of protein kinases and in protein-protein interactions. In total, these results suggest a structural basis for the differential use and evolution of threonine versus serine phosphorylation sites in proteins, with serine phosphorylation typically inducing smaller, rheostat-like changes, versus threonine phosphorylation promoting larger, step function-like switches, in proteins.

Development of Orally Bioavailable Peptides Targeting an Intracellular Protein: From a Hit to a Clinical KRAS Inhibitor.

Cyclic peptides as a therapeutic modality are attracting a lot of attention due to their potential for oral absorption and accessibility to intracellular tough targets. Here, starting with a drug-like hit discovered using an mRNA display library, we describe a chemical optimization that led to the orally available clinical compound known as LUNA18, an 11-mer cyclic peptide inhibitor for the intracellular tough target RAS. The key findings are as follows: (i) two peptide side chains were identified that each increase RAS affinity over 10-fold; (ii) physico-chemical properties (PCP) including Clog P can be adjusted by side-chain modification to increase membrane permeability; (iii) restriction of cyclic peptide conformation works effectively to adjust PCP and improve bio-activity; (iv) cellular efficacy was observed in peptides with a permeability of around 0.4 × 10-6 cm/s or more in a Caco-2 permeability assay; and (v) while keeping the cyclic peptide's main-chain conformation, we found one example where the RAS protein structure was changed dramatically through induced-fit to our peptide side chain. This study demonstrates how the chemical optimization of bio-active peptides can be achieved without scaffold hopping, much like the processes for small molecule drug discovery that are guided by Lipinski's rule of five. Our approach provides a versatile new strategy for generating peptide drugs starting from drug-like hits.

Propagation Capacity of Phage Display Peptide Libraries Is Affected by the Length and Conformation of Displayed Peptide.

The larger size and diversity of phage display peptide libraries enhance the probability of finding clinically valuable ligands. A simple way of increasing the throughput of selection is to mix multiple peptide libraries with different characteristics of displayed peptides and use it as biopanning input. In phage display, the peptide is genetically coupled with a biological entity (the phage), and the representation of peptides in the selection system is dependent on the propagation capacity of phages. Little is known about how the characteristics of displayed peptides affect the propagation capacity of the pooled library. In this work, next-generation sequencing (NGS) was used to investigate the amplification capacity of three widely used commercial phage display peptide libraries (Ph.D.™-7, Ph.D.™-12, and Ph.D.™-C7C from New England Biolabs). The three libraries were pooled and subjected to competitive propagation, and the proportion of each library in the pool was quantitated at two time points during propagation. The results of the inter-library competitive propagation assay led to the conclusion that the propagation capacity of phage libraries on a population level is decreased with increasing length and cyclic conformation of displayed peptides. Moreover, the enrichment factor (EF) analysis of the phage population revealed a higher propagation capacity of the Ph.D.TM-7 library. Our findings provide evidence for the contribution of the length and structural conformation of displayed peptides to the unequal propagation rates of phage display libraries and suggest that it is important to take peptide characteristics into account once pooling multiple combinatorial libraries for phage display selection through biopanning.

Ensemble Generation for Linear and Cyclic Peptides Using a Reservoir Replica Exchange Molecular Dynamics Implementation in GROMACS.

The profile of shapes presented by a cyclic peptide modulates its therapeutic efficacy and is represented by the ensemble of its sampled conformations. Although some algorithms excel at creating a diverse ensemble of cyclic peptide conformations, they seldom address the entropic contribution of flexible conformations and often have significant practical difficulty producing an ensemble with converged and reliable thermodynamic properties. In this study, an accelerated molecular dynamics (MD) method, namely, reservoir replica exchange MD (R-REMD or Res-REMD), was implemented in GROMACS ver. 4.6.7 and benchmarked on two small cyclic peptide model systems: a cyclized furin cleavage site of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike (cyclo-(CGPRRARSG)) and oxytocin (disulfide-bonded CYIQNCPLG). Additionally, we also benchmarked Res-REMD on alanine dipeptide and Trpzip2 to demonstrate its validity and efficiency over REMD. For Trpzip2, Res-REMD coupled with an umbrella-sampling-derived reservoir generated similar folded fractions as regular REMD but on a much faster time scale. For cyclic peptides, Res-REMD appeared to be marginally faster than REMD in ensemble generation. Finally, Res-REMD was more effective in sampling rare events such as trans to cis peptide bond isomerization. We provide a GitHub page with the modified GROMACS source code for running Res-REMD at https://github.com/PlotkinLab/Reservoir-REMD.

Nanoreactor Based on Cyclodextrin for Direct Electrocatalyzed Ammonia Synthesis.

The high-efficiency transition metal-free electrocatalytic nitrate reduction reaction (NO3-RR) for ammonia synthesis has received more attention because of its green and environmentally friendly characteristics. Here, we report an efficient electrochemical NH3 synthesis directly from purely organic macrocyclic compounds α-, β-, and γ-cyclodextrins (CDs)-catalyzed transition metal-free electroreduction of nitrate under ambient conditions. In comparison with α-, and β-CDs, parent γ-CD presented uncommon catalytic performance with a relatively higher NH3 yield that can reach up to 2.28 mg h-1 cm-2 with a Faradaic efficiency (FE) of 63.2% at -0.9 V versus a reversible hydrogen electrode in alkaline medium, and the potassium ion-coordinated γ-CD complex can achieve a maximum NH3 production rate up to 4.66 mg h-1 cm-2 with an NH3 FE of 79.3%. Further comparison with permethyl-γ-CD, d-glucose, and poly(vinyl alcohol) for the NO3-RR indicated that the typical torus-shaped cyclic conformation and edge hydroxyl groups of parent CDs play important roles in the electrocatalytic process. The K+-mediated 3D γ-CD-K+ frameworks containing six CDs as nanoreactors greatly strengthen the enrichment effect of nitrate through hydrogen-bonding interaction and electrostatic interaction and promote the mass transfer, thus leading to the efficient NO3-RR in an alkaline electrolyte. This work provides a convenient, green, and economic method for high-performance NO3-RR, which has potential applications in the fields of environment, energy, and industry.

Noncovalent Surface Modification of Metal-Organic Frameworks: Unscrambling Adsorption Properties via Isothermal Titration Calorimetry.

Despite the importance of noncovalent interactions in the utilization of metal-organic frameworks (MOFs), using these interactions to functionalize MOFs has rarely been explored. The ease of functionalization and potential for surface-selective functionalization makes modification via noncovalent interactions promising for the creation of porous photocatalytic assemblies. Using isothermal titration calorimetry, photoluminescence measurements, and desorption experiments, we have explored the nature and magnitude of the interactions of [Ru(bpy)2(bpy-R)]2+-functionalized dyes with the surface of MIL-96, where R = C3, C8, C12, and C18 alkyl chains of either straight-chain or cyclic conformations. The orientation of the dyes appears to be flat against the surface with respect to the long alkyl chains, and the surface concentration approaches a monolayer at high initial concentrations of dye. Strangely, the dodecyl-functionalized dye, despite having a smaller interaction energy and larger footprint than either octyl-functionalized dye, achieves the highest maximum surface concentration. Based on photoluminescence spectra, desorption experiments, and ITC data, we believe this is due to the core of the dye being lifted from the surface as the chain length increases. Our understanding of these interactions is important for further utilization of this method for the functionalization of the internal and external surface areas of MOFs.

A simpler and greener alternative route for anchoring carbohydrates with structural integrity on silica and glass supports

A novel, straightforward, and environmentally friendly direct coupling procedure to immobilize carbohydrates on solid supports is presented. A characterization study showed that all amino groups on solid supports participated in the linkage with a carbohydrate unit, implicating that the surface load can be easily adjusted by tuning the amination coverage of the surface. Most importantly, the integrity of the cyclic conformation of the linked sugar unit was demonstrated, a feature that is critical for most of the possible applications of carbohydrate-functionalized surfaces. Furthermore, carbohydrate-immobilized submicron particles synthesized by the direct coupling method, on which lectin profiling experiments were conducted, validated the successfulness of our simplistic approach.

Mechanistic Insights into Palladium(II)-Catalyzed Carboxylation of Thiophene and Carbon Dioxide

The mechanism in palladium-catalyzed carboxylation of thiophene and CO2 is investigated using the density functional theory (DFT) calculations, including three consecutive steps of the formation of carbanion through breaking the C–H bond(s) via the palladium acetate, the elimination of acetic acid and the nucleophile attacking the weak electrophile CO2 to form C–C bond. Results show that the C–C bond is formed through taking the three-membered cyclic conformation arrangement involving the interaction of the transition metal and the CO2, and the CO2 insertion step is the rate-determining step for this entire reaction process. Aiming to precisely disclose what factor determine the origin of the activation energy barrier in this carboxylation reaction, the distortion/interaction analysis is performed along with the entire reaction coordinate.

Cyclization and Docking Protocol for Cyclic Peptide-Protein Modeling Using HADDOCK2.4.

An emerging class of therapeutic molecules are cyclic peptides with over 40 cyclic peptide drugs currently in clinical use. Their mode of action is, however, not fully understood, impeding rational drug design. Computational techniques could positively impact their design, but modeling them and their interactions remains challenging due to their cyclic nature and their flexibility. This study presents a step-by-step protocol for generating cyclic peptide conformations and docking them to their protein target using HADDOCK2.4. A dataset of 30 cyclic peptide–protein complexes was used to optimize both cyclization and docking protocols. It supports peptides cyclized via an N- and C-terminus peptide bond and/or a disulfide bond. An ensemble of cyclic peptide conformations is then used in HADDOCK to dock them onto their target protein using knowledge of the binding site on the protein side to drive the modeling. The presented protocol predicts at least one acceptable model according to the critical assessment of prediction of interaction criteria for each complex of the dataset when the top 10 HADDOCK-ranked single structures are considered (100% success rate top 10) both in the bound and unbound docking scenarios. Moreover, its performance in both bound and fully unbound docking is similar to the state-of-the-art software in the field, Autodock CrankPep. The presented cyclization and docking protocol should make HADDOCK a valuable tool for rational cyclic peptide-based drug design and high-throughput screening.

Antibacterial and hemostatic capacities of cellulose nanocrystalline-reinforced poly(vinyl alcohol) electrospun mats doped with Tiger 17 and pexiganan peptides for prospective wound healing applications.

Infection is a major issue in chronic wound care. Different dressings have been developed to prevent microbial propagation, but an effective, all-in-one (cytocompatible, antimicrobial and promoter of healing) solution is still to be uncovered. In this research, polyvinyl alcohol (PVA) nanofibrous mats reinforced with cellulose nanocrystal (CNC), at 10 and 20% v/v ratios, were produced by electrospinning, crosslinked with glutaraldehyde vapor and doped with specialized peptides. Crosslinking increased the mats' fiber diameters but maintained their bead-free morphology. Miscibility between polymers was confirmed by Fourier-transform infrared spectroscopy and thermal evaluations. Despite the incorporation of CNC having reduced the mats' mechanical performance, it improved the mats' surface energy and its structural stability over time. Pexiganan with an extra cysteine group was functionalized onto the mats via hydroxyl- polyethylene glycol 2-maleimide, while Tiger 17 was physisorbed to preserve its cyclic conformation. Antimicrobial assessments demonstrated the peptide-doped mat's effectiveness against Staphylococcus aureus and Pseudomonas aeruginosa; pexiganan contributed mostly for such outcome. Tiger 17 showed excellent capacity in accelerating clotting. Cytocompatibility evaluations attested to these mats' safety. C90/10 PVA/CNC mats were deemed the most effective from the tested group and, thus, a potentially effective option for chronic wound treatments.

Cyclo(L-Leucyl-L-Prolyl) from Lactobacillus coryniformis BCH-4 inhibits the proliferation of Aspergillus flavus: an in vitro to in silico approach.

Fungal spoilage led to a considerable economic loss of foodstuff which ultimately affects public health due to mycotoxins production. Moreover, the consumption of commercial antifungal drugs creates side effects and develops antifungal resistance. To overcome these challenges, the current work was aimed to investigate novel antifungal cyclic dipeptide (CDP) from Lactobacillus coryniformis (Loigolactobacillus coryniformis)BCH-4. CDPs have flexible, cyclic, and stable conformation. The proline-based CDPs provide additional structural compatibility and bio-functional values. Keeping in view, high-performance liquid chromatography (HPLC) was performed to explore cyclo(L-Leu-L-Pro) from L. coryniformis BCH-4. The HPLC detected concentration (135 ± 7.07mg/mL) exhibited in vitro antifungal activity of 5.66 ± 0.57mm (inhibitory zone) against Aspergillus flavus. Based on these results, cyclo(L-Leu-L-Pro) was used as a bioprotectant for selected food samples (grapes, lemon, cashew nuts, and almonds). A significant impact of cyclo(L-Leu-L-Pro) was observed in contrast with MRS broth (control) and cell-free supernatant. In silico molecular docking analysis of this CDP was carried out against FAD glucose dehydrogenase, dihydrofolate reductase, and urate oxidase of A. flavus as target proteins. Among these proteins, FAD glucose dehydrogenase exerted strong interactions with cyclo(L-Leu-L-Pro) having S-score of - 8.21. The results evaluated that the detected CDP has strong interactions with selected proteins, causing excellent growth inhibition of A. flavus. Therefore, cyclo(L-Leu-L-Pro) could be used as a potent bioprotectant against food-borne pathogenic fungi.