Cycling Rate Research Articles

Tailoring Ce-Centered Metal-Organic Frameworks for Fast Li+ Transport in Composite Polymer Electrolyte.

Regulating metal nodes to innovate the metal-organic framework (MOF) structure is of great interest to boost the performance of MOFs-incorporated composite solid electrolytes. Herein, Ce4+ with a low-lying 4f orbital is selected as metal center to coordinate with organic ligand to prepare MOF of Ce-UiO-66. The unsaturated open metal sites and defected oxygen vacancies furnish Ce-UiO-66 with strengthened Lewis acidity, which promotes Ce-UiO-66 interacting effectively with both poly(ethylene oxide) (PEO) and Li salt anions. Accordingly, Ce-UiO-66 as additive fillers can be uniformly dispersed in PEO matrix to form an advanced composite solid-state electrolyte (Ce-UiO@PEO) with accelerated Li+ transport. The optimized Ce-UiO@PEO displays a boosted ionic conductivity of 4.20 × 10-4 S cm-1 and an improved Li+ transference number of 0.39 at 60 °C, which are highly comparable to those of other MOFs@PEO electrolytes. Combined with the mechanical and thermal stabilities, such a Ce-UiO@PEO electrolyte enables Li/Li symmetric and Li/LiFePO4 full cells with superior cycling stability and rate performance. The Ce-UiO@PEO electrolytes are of great potential to be applied in high-performance lithium metal batteries.

Phase Engineering of ZnSe by Small Molecules as a High-Performance Protective Layer for Zn Anode.

The practical application of aqueous zinc ion batteries is still hampered by the side reactions and dendrite growth on Zn anode. Herein, the phase engineering of ZnSe coating layer by incorporating small molecules is developed to enhance the performance of Zn anode. The unique electronic structure of ZnSe⋅0.5N2H4 promises strong adsorption for Zn atoms and enhanced ability to inhibit hydrogen evolution, thereby promoting uniform Zn deposition and preventing by-product and dendrite growth. Meanwhile, fast Zn2+ transfer and deposition kinetics are also demonstrated by ZnSe⋅0.5N2H4. As a result, the ZnSe⋅0.5N2H4@Zn symmetric cell achieves long-term cycling stability up to 1900 h and 300 h at high current densities of 5 mA cm-2 and 20 mA cm-2, respectively. The assembled ZnSe⋅0.5N2H4@Zn||NH4V4O10 full cell presents outstanding cycling stability and rate capability. This work highlights the key role of crystal phase control of protective layer for high-performance zinc anode.

Saturation Mobility of 100 cm2 V-1 s-1 in ZnO Thin-Film Transistors through Quantum Confinement by a Nanoscale In2O3 Interlayer Using Spray Pyrolysis.

In this study, we present a comprehensive study on the fabrication and characterization of heterojunction In2O3/ZnO thin-film transistors (TFTs) aimed at exploiting the quantum confinement effect to enhance device performance. By systematically optimizing the thickness of the crystalline In2O3 (c-In2O3) layer to create a narrow quantum well, we observed a significant increase in saturation mobility (μSAT) from 12.76 to 97.37 cm2 V-1 s-1. This enhancement, attributed to quantum confinement, was achieved through the deposition of a 3 nm c-In2O3 semiconductor via spray pyrolysis. Various In2O3 layer thicknesses (2-5 nm) were obtained by adjusting precursor solution concentration, flow rate, and number of spray cycles. Post annealing treatments were employed to reduce the defects at the interface and within the oxide film, enhancing device stability and performance. Transmission electron microscopy (TEM) confirmed the uniformity of the c-In2O3 film thickness, while variations in thickness significantly influenced TFT performance, particularly the turn-on voltage (VGS) due to changes in the carrier concentration. Ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS) supported the formation of a potential well with a two-dimensional electron gas (2DEG). The study of single and multiple superlattice structures of consecutive c-In2O3 and c-ZnO layers provided insights into the effects of multiple quantum wells on the TFT performance. This research presents an advanced approach to TFT optimization, highlighting high reliability, and environmental and bias stabilities. These lead to enhanced mobility and performance uniformity through the precise control of c-In2O3 layer thickness for the quantum confinement effect.

A High-Voltage n-type Organic Cathode Materials Enabled by Tetraalkylammonium Complexing Agents for Aqueous Zinc-Ion Batteries.

Tetrabutylammonium (TBA) salt of hexacyano-substituted cyclopropane dianion (Cp(CN)6 2 -) is prepared through a facile two-step synthetic protocol from commercially available materials and fully characterized as a high-voltage n-type organic cathode in rechargeable aqueous zinc-ion batteries (AZIBs). The addition of tetrabutylammonium triflate (TBAOTf)to the electrolyte mitigates dissolution issues, leading to enhanced cycling stability. Remarkably, the Cp(CN)6 2 - cathode demonstrates a high discharge voltage of 1.43V in AZIBs and retains 85% of its capacity after 1000 cycles at a high loading of 10mg cm- 2 and a cycling rate of 10C. These results, combined with spectroscopic analyses, elucidate a reversible two-electron redox process of Cp(CN)6 2 - facilitated by the insertion/de-insertion of TBA cation. These findings underscore the potential of Cp(CN)6 2 - as a conversion-based n-type cathode in energy storage applications.

Designing Bilayer Heterostructure Functional Polymer Electrolytes with Interfacial Engineering Strategy for High‐Performance Lithium Metal Batteries

AbstractThe uncontrollable lithium (Li) dendrites growth and complex electrode/electrolyte interface (EEI) problems are hindering the further application of high energy density lithium metal batteries (LMBs) in practice. Herein, a bilayer heterostructure gel polymer electrolyte (BGPE) is designed by directly curing functional boron‐containing monomers on the electrode surface to ensure excellent conductivity while solving the interface problems, achieving durable high voltage resistance and Li dendrites suppression. The unoccupied p‐orbital boron moiety of the 3D crosslinked network in BGPE not only improves the Li+ transference number (0.78), but also enhances the interfacial stability of the Li metal and inhibits the dendrites growth by anchoring PF6− anions and regulating the uniform Li deposition, thus ensuring a long cycle for Li/BGPE/Li cells. In addition, the functional additives tris(trimethylsilyl) phosphite and tris(pentafluorophenyl)borane can preferentially oxidize and decompose to form stable B, F, and Si‐rich EEIs, and effectively regulate the uniform growth of EEI. Thus, the LiNi0.5Co0.2Mn0.3O2/BGPE/Li and LiFePO4/BGPE/Li full cells exhibit stable cycling and excellent rate performance. This work provides a guiding design direction to address the EEI problems for high energy density LMBs.

Partial‐Oxidation Enabling Homologous Ru/RuO2 Heterostructures With Proper d‐Dand Center as Efficient and Durable Cathode Catalysts for Ultralong Cycle Life in Li–O2 Batteries

AbstractThe sluggish cycle kinetics is one of the major obstacles to the commercial application of Li–O2 batteries (LOBs), despite their large theoretical energy density. Efficient and long‐term durable cathode catalysts are urgently desired to strengthen their cycle stability and rate performance. Density functional theory calculations reveal that Ru/RuO2 Mott–Schottky heterostructures can manipulate the adsorption capacities of intermediates by modulating the d‐band center and redistribute interfacial charges, enabling efficient redox kinetics, reducing overpotentials, and optimizing the growth pathway of discharge products. Herein, a wet impregnation approach followed by partial oxidization of Ru nanodots to construct homologous Ru/RuO2 heterostructures as advanced cathode catalysts for boosting the electrochemical activities of LOBs is employed. They exhibit superior electrochemical performance, including high discharge specific capacity (17 120 mAh g−1 at 200 mA g−1), small overpotential (0.96 V), and ultralong cycle lifetime of 1209 cycles (>2400 h) at 500 mA g−1. Over 1260‐h stable cycle in air atmosphere at 500 mA g−1 demonstrates the potential application prospects of the Ru/RuO2 heterostructures in Li‐air batteries. Multiple ex/in situ measurements and theoretical calculation are conducted to investigate the optimizing mechanism of electrochemical performances.

Investigation on the Necessity of Low Rates Activation toward Lithium‐Sulfur Batteries

AbstractLow rate activation process is always used in conventional transition metal oxide cathode and fully activates active substances/electrolyte to achieve stable electrochemical performance. However, the related working mechanism in lithium‐sulfur (Li‐ battery is unclear due to the multiple complex chemical reaction steps including the redox of sulfur and the dissolution of polysulfides intermediate. Hence, the influencing mechanism of activation process on Li‐S battery is explored by adopting different current densities of 0.05, 0.2, and 1 C in initial three cycles before long‐term cycling tests at 0.2 C (denoted by 0.05, 0.2, and 1‐battery). 0.05‐battery presents the highest initial capacity in activation process, while 0.2‐battery presents superior electrochemical performances after 150 cycles. The similar trend can be found in more long‐term cycling rates such as 0.02, 0.1, 0.5, and 1 C. Potentiostatically Li2S precipitation test demonstrates that rapid generation of Li2S is achieved at higher current density, and S8‐Li2Sn‐Li2S conversion is accelerated according to Tafel plots. However, interfacial electrochemical and physical characterizations suggest that serious lithium dendrite growth will be induced under high current density. Therefore, considering the reaction kinetics and interfacial properties, low rate activation process is unnecessary when cycling current lower than 1 C for Li‐S battery.

N-acetylcysteine supplementation improves endocrine-metabolism profiles and ovulation induction efficacy in polycystic ovary syndrome

BackgroundPolycystic ovary syndrome (PCOS) affects 6–20% of women worldwide, with insulin resistance and hyperinsulinemia occurring in 50-70% of patients. Hyperinsulinemia exacerbates oxidative stress, contributing to PCOS pathogenesis. N-acetylcysteine (NAC) is an antioxidant and insulin sensitizer that shows promise as a therapeutic for PCOS. Our current study aimed to investigate the effects of NAC supplementation on endocrine-metabolic parameters in PCOS mice and its effect on ovulation induction (OI) efficacy in women with PCOS.MethodsFemale C57BL/6 mice were orally administered letrozole (LE) to induce PCOS and then randomly divided into groups receiving daily oral administration of 160 mg/kg NAC (PCOS + NAC group), 200 mg/kg metformin (PCOS + Met group), or 0.5% carboxymethyl cellulose (drug solvent) (pure PCOS group) for 12 days. Healthy female mice served as pure controls. Estrous cycles were monitored during the intervention. Metabolic and hormone levels, ovarian phenotypes, antioxidant activity in ovarian tissues, and oxidative stress levels in oocytes were assessed post-intervention. Furthermore, a pragmatic, randomized, controlled clinical study was conducted with 230 PCOS women, randomly assigned to the NAC group (1.8 g/day oral NAC, n = 115) or the control group (n = 115). Patients in both groups underwent ≤ 3 cycles of OI with sequential LE and urinary follicle-stimulating hormone (uFSH). Cycle characteristics and pregnancy outcomes were compared between groups.ResultsSimilar to metformin, NAC supplementation significantly improved the estrous cycles and ovarian phenotypes of PCOS mice; reduced the LH concentration, LH/FSH ratio, and T level; and increased glucose clearance and insulin sensitivity. Notably, NAC significantly reduced oocyte ROS levels and increased the mitochondrial membrane potential in PCOS mice. Additionally, NAC significantly enhanced enzymatic and nonenzymatic antioxidant activities in PCOS mouse ovaries, whereas metformin had no such effect. In the clinical trial, compared to women in the control group, women receiving NAC had significantly lower average uFSH dosage and duration (p < 0.005) and significantly greater clinical pregnancy rates per OI cycle and cumulative clinical pregnancy rates per patient (p < 0.005).ConclusionNAC supplementation improved endocrine-metabolic parameters in PCOS mice and significantly enhanced OI efficacy with sequential LE and uFSH in women with PCOS. Therefore, NAC could be a valuable adjuvant in OI for women with PCOS.

Synergistic Dual Electrolyte System of LATP and In‐ Situ Solod‐State PDOL System and its Improvement on the Performance of NCM811 Batteries

Abstract1,3‐Dioxolane (DOL) can undergo in‐situ polymerization in batteries to form solid‐state organic electrolyte PDOL. When applied to NCM811||Li battery system, PDOL electrolyte helps optimize the contact and interface stability between electrolyte and electrodes. This study explores the effects of PDOL with PE separators coated with Li1.3Al0.3Ti1.7(PO4)3(LATP) on the performance of NCM811||Li batteries. 2,2,2‐trifluoroethyl phosphite (DETFPi), was mixed with DOL at a 1 : 35 mass ratio. Then, LiBF4 was used to initiate in‐situ polymerization and thereby obtained DETFPi‐PDOL electrolyte after 24 h at room temperature. The composite electrolyte exhibits enhanced ion conductivity (1.59×10−4 S cm−1), high lithium ion transference number (0.78), wide electrochemical stability window (4.53 V), and high critical current density (2.2 mA cm−2). Li||PDOL@LATP||Li battery shows extremely low overpotential (35 mV) after a constant current stable cycle of 500 h at 1.0 mA cm−2. After 500 cycles at 1 C, the remaining capacity is 153.9 mAh g−1 with a capacity retention of 82.1 % in NCM811||PDOL@LATP||Li batteries. This indicates that the LATP coating on the surface of the PE separator plays an important role in optimizing the performance of DETFPI‐PDOL electrolyte batteries. LATP and DETFPI‐PDOL are effective in improving the cycling stability, rate performance, and interface state of NCM811 batteries.

Dextran Sulfate Sodium as Multifunctional Aqueous Binder Stabilizes Spinel LiMn2O4 for Lithium Ion Batteries

AbstractSpinel LiMn2O4 (LMO) has several beneficial properties for utilization as a cathode material for lithium‐ion batteries, including a high operating voltage, thermal stability, low cost, and eco‐friendliness. However, its application is limited by capacity fading due to structural transformation and manganese dissolution upon cycling. A method is proposed to resolve these two issues, using dextran sulfate sodium (DSS) as an aqueous binder to coat the LMO surface. DSS stabilizes the surface/interface structure of LMO by incorporating Na into the interstitial 16c sites, creating a uniform surface coating layer and promoting the formation of a homogeneous and stable cathode‐electrolyte interphase derived from the sulfate groups in DSS and enriched with LiF/LiSOxF. The aqueous DSS binder effectively suppresses the surface degradation and Mn dissolution of spinel LMO. The LMO electrode based on DSS exhibits superior cycling stability and rate performance compared with those of electrodes using the conventional poly(vinylidene difluoride) binder. These findings demonstrate the potential value of DSS as a multifunctional aqueous binder in stabilizing spinel LMO for lithium‐ion batteries.

Quantifying Lithium-Ion Battery Rate Capacity, Electrode Structuring, and Transport Phenomena Using E-I Measurements

The specific energy of lithium-ion batteries (LIBs) can be enhanced through various approaches, one of which is increasing the proportion of active materials by thickening the electrodes. However, this typically leads to the battery having lower performance at a high cycling rate, a phenomenon commonly known as rate capacity retention. One solution to this is perforating the electrode, by creating channels or corrugations in the active electrode material, either as holes or as channels. This is known to reduce the rate capacity retention effect, but in order to engineer this better, a simplified transport process analysis needs to be established. In this paper, we propose a classic electrochemical analysis based on voltage–charge cycling measurements in order to obtain a classical mass transport coefficient, hm, that is further used as a main indicator for electrode design quality assessment. We also demonstrate theoretically and experimentally how the mass transfer coefficient, hm, can be determined and how it changes as the electrode layer thickness increases, with and without electrode corrugations.

Architecting Sturdy Si/Graphite Composite with Lubricative Graphene Nanoplatelets for High-Density Electrodes.

Densification of the electrode by calendering is essential for achieving high-energy density in lithium-ion batteries. However, Si anode, which is regarded as the most promising high-energy substituent of graphite, is vulnerable to the crack during calendering process due to its intrinsic brittleness. Herein, a distinct strategy to prevent the crack and pulverization of Si nanolayer-embedded Graphite (Si/G) composite with graphene nanoplatelets (GNP) is proposed. The thickly coated GNP layer on Si/G by simple mechanofusion process imparts exceptional mechanical strength and lubricative characteristic to the Si/G composite, preventing the crack and pulverization of Si nanolayer against strong external force during calendering process. Accordingly, GNP coated Si/G (GNP-Si/G) composite demonstrates excellent electrochemical performances including superior cycling stability (15.6% higher capacity retention than P-Si/G after 300 cycles in the full-cell) and rate capability under the industrial testing condition including high electrode density (>1.6gcm-3) and high areal capacity (>3.5mAhcm-2). The material design provides a critical insight for practical approach to resolve the fragile properties of Si/G composite during calendering process.

Unravelling the performance of lead-free perovskite cathodes for rechargeable aqueous zinc-ion batteries

The quest for efficient and sustainable energy storage solutions has led to the emergence of zinc-ion batteries (ZIBs) as a promising candidate, offering numerous advantages in terms of cost-effectiveness, safety, and performance. The key to commercialising ZIBs lies in developing cathode materials that offer high specific capacity and prolonged cycle performance. The present study demonstrates the capability of environmentally friendly, lead-free inorganic perovskites for high-rate rechargeable aqueous zinc-ion batteries with enhanced stability and excellent rate performance. The battery exhibits a high specific capacity of 220 mAh/g at a current density of 1000 mA/g and a quite stable capacity of 50 mAh/g and a good cycling stability of 20000 cycles at a very high rate of 20 A/g. The caesium bismuth iodide perovskite emerges as a promising candidate for cathode material in Zn-ion batteries, exhibiting high specific capacity and superior rate cyclability. Furthermore, incorporation of Ag in CsBi3I10 is found to enhance the specific capacity and exhibits superior cycling stability. This study marks a significant advancement in the utilisation of perovskite materials as new cathodes for high-rate ZIBs.

Tuning Crystalline Preferred Orientation of SnSe2 Anode by Co-doping to Enhance Pseudocapacitive Behaviors for High-Performance Sodium Storage.

SnSe2 has attracted great attention due to its unique 2D-layered structure, which makes it capable of sodium ion storage and higher theoretical capacities compared to traditional anode materials like hard carbon for sodium ion batteries (SIBs). However, SnSe2-based materials will cause structural damage due to volume expansion during ion storage, leading to poor cycle stability and rate capacity. In this work, Co-doped SnSe2 (Co-SnSe2) with preferred crystal orientation was fabricated by a one-step solvothermal method. It has been found that after doping Co, the lower (001) crystal plane located at 14.4° replaced the higher (101) plane at 30.7° as the dominant crystal plane in Co-SnSe2, which significantly promoted ion diffusion and enhanced the pseudocapacitance behavior. Therefore, this Co-SnSe2 anode achieves a high capacity of 504 mAh g-1 at 1 A g-1, and a high-rate cycle stability, delivering a reversible capacity of 302 mAh g-1 at 5 A g-1 after 1800 cycles with a retained capacity rate of 94%. Moreover, the Na3V2(PO4)3||Co-SnSe2 full cell exhibits a stable cycle performance of over 300 cycles at 1 A g-1, demonstrating great promise for practical applications. This work provides an effective reference for the exploration of high-performance sodium storage anode materials.

Effect of progesterone concentration on hCG trigger day on clinical outcomes after high-quality single blastocyst transfer in GnRH antagonist cycles.

To investigate whether progesterone levels on the human chorionic gonadotropin (hCG) trigger day are associated with clinical outcomes in fresh cycles and the first frozen-thawed cycles (the freeze-all strategy) following the transfer of a high-quality single blastocyst. This single-center retrospective analysis was conducted on patients undergoing in vitro fertilization with the gonadotropin-releasing hormone (GnRH) antagonist protocol from January 2017 to December 2023. The study included the first and second oocyte retrieval cycles with progesterone levels ≤2 ng/ml on hCG trigger day. Clinical pregnancy rates and early miscarriage rates were compared among groups using curve fitting, threshold effect analysis, and multivariable regression. When progesterone levels were between 1 and 2 ng/ml, the pregnancy rate in fresh cycles was only 51% of that in cycles with progesterone levels ≤1 ng/ml (95% CI: 0.33, 0.79, p = 0.0028). And the pregnancy rate decreased by 25% (95% CI: 0.51, 1.09) for frozen cycles, although there was no statistically significant (p = 0.1273). When cycle types were used as a binary variable in multivariate regression analysis, it was found that the clinical pregnancy rate in frozen cycles was 1.84 times higher than in fresh cycles (OR = 1.84, 95% CI: 1.38-2.47). For progesterone levels between 1 and 2 ng/ml, the clinical pregnancy rate in frozen cycles was 2.90 times that of fresh cycles (OR = 2.90, 95% CI: 1.59, 5.29, p = 0.0015). Progesterone levels on hCG day had no impact on the clinical pregnancy rate in thaw cycles, nor did they affect miscarriage rates in fresh or thaw cycles (p > 0.05). When progesterone levels on hCG trigger day were between 1 and 2 ng/ml, the clinical pregnancy rate for frozen-thawed cycles of high-quality single blastocyst transfer using an GnRH antagonist protocol significantly surpasses that of fresh cycles, thus elective frozen embryo transfer after the freeze-all strategy is recommended.

Phosphorus and Nitrogen Dual-Doped Hollow Porous Carbon Spheres toward Enhanced Cycling Stability of Room-Temperature Na-S Batteries.

Development of room-temperature sodium-sulfur (RT Na-S) batteries with satisfactory cycling life and rate capability remains challenging due to the unfavorable electric conductivity from S species, sluggish redox kinetics of S conversion, and serious shuttle effects of sodium polysulfides (NaPSs). To address these issues, a phosphorus and nitrogen dual-doped hollow porous carbon sphere (PN-HPCs) is synthesized as the S hosts, which enhances the electric conductivity, ion diffusion, and conversion of polysulfides. Such a hollow hierarchically porous structure is beneficial to accommodate the volume variations of S species and shorten the ion/electron transfer distances during electrochemical reaction process. As a result, the S@PN-HPCs600 cathode delivers noticeable cycling performance (313 mAh g-1 after 4500 cycles at 5.0 C, and capacity degeneration of only 0.01% per cycle) and rate capability (646.4 mAh g-1@1.0 and 527.5 mAh g-1@3.0 C). This work presents an efficient strategy based on structural confinement and dual-heteroatom doping engineering for long-life RT Na-S batteries.

Exotic mangrove Laguncularia racemosa litter input accelerates nutrient cycling in mangrove ecosystems.

Exotic plant litter presents different chemical and physical properties relative to native plant litter and alters ecosystem processes and functions that may facilitate exotic plant dispersal. However, these effects are largely unknown, especially within wetland ecosystems. This study examines whether introducing litter from theexotic mangrove Laguncularia racemosa could result in (1) accelerated community litter decomposition rates and increased nutrient cycling rates and (2)microbial community structure changes in the invaded areas. A single decomposition experiment using litterbags was conducted to examine the short-term effects of L. racemosa litter in the native mangrove forest ecosystem. The soil nutrients and microbial communities of Rhizophora stylosa, L. racemosa, and mixed forests were also compared to explore the long-term cumulative effects of L. racemosa litter in native ecosystems. The results indicated that L. racemosa has lower-quality leaf litter than R. stylosa and a significantly faster decomposition rate. This may result from changes in the soil microbial community structure caused by L. racemosa leaf litter input, which favors the decomposition of its own litter. Both the short-term and cumulative effect experiments demonstrated that L. racemosa leaf litter significantly increased the relative abundance of microbes related to litter decomposition, such as Proteobacteria and Bdellovibrionota, and enhanced the alpha diversity of soil fungi, thus creating a microbial environment conducive to L. racemosa leaf litter decomposition. Moreover, the accumulation of soil nutrients was lower under L. racemosa than under R. stylosa over several years. This may be related to the more rapid growth of L. racemosa, which causes soil nutrient absorption and storage within the plant tissues, thereby reducing the soil nutrient content. Inputting exotic mangrove L. racemosa leaf litter reduced the soil blue carbon content, potentially adversely affecting global climate change. L. racemosa may employ a unique strategy to lower soil nutrient levels in native mangroves based on its low-quality leaf litter, thereby weakening the competitive ability of native plants that are intolerant to low-nutrient conditions and enhancing its own competitive advantage to further spread into these areas. In summary, the input of exotic L. racemosa leaf litter accelerates nutrient cycling in local mangroves.

Enhanced Cycling Stability and Rate Capability of Al2O3-Coated NaNi1/3Fe1/3Mn1/3O2 Cathodes for Sodium-Ion Batteries

Enhanced Cycling Stability and Rate Capability of Al2O3-Coated NaNi1/3Fe1/3Mn1/3O2 Cathodes for Sodium-Ion Batteries

Effects of SiO2 Particle Size in Soggy‐Sand Electrolyte on Electrochemical Performance of Zinc‐Ion Batteries

AbstractThe presence of free water molecules in the aqueous electrolyte leads to serious side reactions at the interface, easy dissolution of the cathode material, and uncontrolled growth of zinc dendrites in Zn‐ion batteries, which hinders their practical applications. Here, we propose a type of SiO2‐based soggy‐sand electrolyte (ZnSO4+MnSO4 electrolyte with SiO2, SiO2‐ZMSO4) and focus on the effect of the SiO2 nanoparticle size on the performance of soggy‐sand electrolyte. It is found that SiO2 with smaller nanoparticle size provides higher porosity, and the SiO2 network‐formed can effectively trap the free water in the electrolyte, which increases the ionic conductivity of electrolyte, widens working voltage window, and decreases the internal resistance of batteries. As a result, the Zn//MnO2 batteries with 20 nm SiO2‐based soggy‐sand electrolyte show stable cycling performance and rate capacities. The specific capacity of the battery can be maintained at 198.5 mAh g−1 after 1200 cycles at 1 A g−1 without capacity degradation. The specific capacity can be increased by 100 mAh g−1 even at a high rate of 5 A g−1. This study provides the rule of particle selection for the development of aqueous soggy‐sand electrolytes used in aqueous rechargeable batteries.

Heteroatom doped graphitic carbon nanotubes as freestanding anodes for advanced potassium-ion batteries

Owing to its higher earth element reserve and similar chemical properties to lithium, potassium ion batteries (PIBs) have been regarded as a potential alternative to lithium-ion batteries. And considering the relatively larger ionic radius of potassium, available electrode materials need to be equipped with enough space for volume expansion during charge-discharge cycles, thus graphitic carbon nanomaterials with adjustable layer spacing gradually come into researcher's version. Here with copper nanowires serving as growth template and organic polyvinyl pyrrolidone (PVP) providing carbon source, freestanding and ultra-light graphitic carbon nanotube (GCNT) aerogels were simply assembled and annealed, which were directly used as anodes of PIBs. Annealing parameters (temperature and atmosphere) were adapted to regulate the lattice order and interlayer spacing of GCNTs, and N, O heteroatoms derived from PVP were directly doped into the carbon lattice during thermal annealing, to optimize and enhance the cycle capacity and rate performance of GCNT anodes. The electrochemical potassium storage mechanism of GCNTs was also quantitatively analyzed. Most of the potassium ions are reversibly stored by squeezing into and escaping from the carbon lattice, and simultaneously oxygen-containing functional groups with different chemical states also offer active redox sites and dedicate partial capacity. Therefore, our assembled GCNTs with large lumen are expected to sandwich-like load with active substances efficiently, further constructing next-generation PIBs with excellent performance.