Current Liquid Crystal Display Research Articles

Algorithm and Architecture Design of Multirate Frame Rate Up-conversion for Ultra-HD LCD Systems

In current liquid crystal display (LCD) systems, the frame size becomes larger than the ultra-HD ( $3840\times 2160$ ) resolution, and the refresh rate becomes higher than 120 Hz or more. However, the available video frame rates are usually at 24, 30, or 60 frames/s only, which are lower than the refresh rate of LCDs. To fill the gap between the video and LCD systems, frame interpolation techniques are usually adopted. Although frame rate up-conversion (FRUC) is regarded as the most efficient method, many design challenges are encountered in the current high-resolution and high-frame-rate LCD systems. In this paper, we developed a hardware-efficient multirate FRUC, which is capable of increasing the video frame rate from 24 or 60 to 120 frames/s. We improved the accuracy of motion vectors (MVs) between the video frames using predictive square search motion estimation (ME), followed by Markov random field (MRF) correction. Subsequently, we applied the block-based forward motion compensation (MC) to interpolate the intermediate frames. Thereafter, we performed subblock refinement to enhance the visual quality. The experiments show that the proposed algorithm performed well in both subjective and objective evaluations. We also designed hardware architecture for our multirate FRUC to support the current ultra-HD LCD systems. We proposed ping-pong two-way scheduling to eliminate the dependence among blocks. We realized 54%, 70%, and 35% cycle reduction and 62%, 82%, and 35% bandwidth reduction in the ME, MRF MV correction, and MC, respectively. The SRAM was shared by all modules, and its total size was reduced by 88%. We also implemented our design to a chip using the TSMC 90-nm cell library.

Tailoring the light distribution of liquid crystal display with freeform engineered diffuser.

We propose a versatile design approach of engineered diffuser based on freeform optics that can tailor the light distribution of a liquid crystal display (LCD) to meet different applications. The proposed LCD system consists of a quasi-directional backlight, liquid crystal panel, and an engineered diffuser. It offers high efficiency, wide view, high contrast, as well as low ambient light reflection. For large size LCDs, we design a wide view diffuser to match the light distribution with state-of-the-art organic light emitting diode (OLED) TV. For mobile displays, we design a diffuser to replicate current LCD performance. Our design can also provide flattop light intensity distribution for privacy protection. These exemplary designs prove that our engineered diffuser is versatile for different applications.

LCDs are better: Psychophysical and photometric estimates of the temporal characteristics of CRT and LCD monitors

Many cognitive and perceptual phenomena, such as iconic memory and temporal integration, require brief displays. A critical requirement is that the image not remain visible after its offset. It is commonly believed that liquid crystal displays (LCD) are unsuitable because of their poor temporal response characteristics relative to cathode-ray-tube (CRT) screens. Remarkably, no psychophysical estimates of visible persistence are available to verify this belief. A series of experiments in which white stimuli on a black background produced discernible persistence on CRT but not on LCD screens, during both dark- and light-adapted viewing, falsified this belief. Similar estimates using black stimuli on a white background produced no visible persistence on either screen. That said, photometric measurements are available that seem to confirm the poor temporal characteristics of LCD screens, but they were obtained before recent advances in LCD technology. Using current LCD screens, we obtained photometric estimates of rise time far shorter (1-6 ms) than earlier estimates (20-150 ms), and approaching those of CRTs (<1 ms). We conclude that LCDs are preferable to CRTs when visible persistence is a concern, except when black-on-white displays are used.

Electric‐field‐driven LC lens for 3‐D/2‐D autostereoscopic display

Abstract— The use of an electric‐field‐driven liquid‐crystal (ELC) lens cell for switching between a 3‐D and 2‐D display is proposed. Due to the phase retardation of the non‐uniform LC directors, an ELC lens functions the same as a geometric lens. The parameters of an ELC for 3‐D applications are optimized through the simulation of the electrode configuration and voltage levels. A prototype was made where the ELC lens is placed in front of a liquid‐crystal display (LCD) 15 in. on the diagonal with a 99‐μm subpixel pitch. Under zero voltage, the ELC lens is a transparent medium and the users can see a clear 2‐D image. In 3‐D mode, the ELC lens array performs the same as a cylindrical lens array to the incident vertical polarization under suitable driving voltages. Placing a half‐wave plate between the LCD and ELC lens is proposed to change the polarization of the LCD to be parallel with the polarization lens direction of the ELC lens. The measurement of the horizontal luminance profile, performance of the ELC lens, and feasibility for 3‐D/2‐D switching was verified. The fabrication process for the ELC lens is compatible with the current LCD production process and enables the accurate control of the lens pitch of the ELC lens.

Three-dimensional imaging system based on a light-emitting diode array

A two-dimensional light-emitting diode array is used to replace the viewing-zone-forming optics in-multiview full-parallax three-dimensional image display systems. Since the array is not working merely as the viewing-zone-forming optics but also as the backlight panel for the liquid-crystal display (LCD) panel, it allows constructing three-dimensional imaging systems having the same structure as the current LCD display. The designed system displays images with good depth sense.

P‐208L: Late‐News Poster: Liquid Crystal Lasers for Projection Displays

AbstractThe liquid crystal laser presents itself as an interesting tool for projection displays, acting as the illumination source. Liquid crystal lasers are fast becoming an interesting area of research within the liquid crystal community. In utilizing integrating these systems with current liquid crystal display (LCD) projection systems, novel designs can be envisioned.

Ambient illumination revisited: A new adaptation‐based approach for optimizing medical imaging reading environments

Ambient lighting in soft-copy reading rooms is currently kept at low values to preserve contrast rendition in the dark regions of a medical image. Low illuminance levels, however, create inadequate viewing conditions and may also cause eye strain. This eye strain may be potentially attributed to notable variations in the luminance adaptation state of the reader's eyes when moving the gaze intermittently between the brighter display and darker surrounding surfaces. This paper presents a methodology to minimize this variation and optimize the lighting conditions of reading rooms by exploiting the properties of liquid crystal displays (LCDs) with low diffuse reflection coefficients and high luminance ratio. First, a computational model was developed to determine a global luminance adaptation value, Ladp, when viewing a medical image on display. The model is based on the diameter of the pupil size, which depends on the luminance of the observed object. Second, this value was compared with the luminance reflected off surrounding surfaces, Ls, under various conditions of room illuminance, E, different values of diffuse reflection coefficients of surrounding surfaces, Rs, and calibration settings of a typical LCD. The results suggest that for typical luminance settings of current LCDs, it is possible to raise ambient illumination to minimize differences in eye adaptation, potentially reducing visual fatigue while also complying with the TG18 specifications for controlled contrast rendition. Specifically, room illumination in the 75-150 lux range and surface diffuse reflection coefficients in the practical range of 0.13-0.22 sr(-1) provide an ideal setup for typical LCDs. Future LCDs with lower diffuse reflectivity and with higher inherent luminance ratios can provide further improvement of ergonomic viewing conditions in reading rooms.

Flexible Plastic Liquid Crystal Displays

ABSTRACTFlexible plastic liquid crystal displays (LCDs) offer a number of advantages over traditional glass displays. Roll-to-roll manufacturing of such displays makes possible large size, inexpensive displays. While this type of manufacturing is still in the future, here we report solutions of some of the pressing problems needed to achieve this goal. We utilize liquid crystal effects that do not require polarizers and can therefore utilize commercially available, birefringent substrates such as polyesters and polyethylene terephthalate. We achieve excellent optical and mechanical performance of these flexible displays, even when bent, by creating polymer networks and polymer walls that adhere the front and back substrates and maintain uniform spacing between the substrates. Roll-to-roll processing of flexible plastic displays also requires that the photolithographic techniques used to pattern the electrodes on the current glass LCD’s be replaced by printing techniques and the development of techniques to rapidly etch unwanted electrode material. We must also develop and optimize techniques for rapidly forming polymer walls. Here we report methods of patterning ITO electrodes on flexible plastic substrates using conventional wax transfer printing techniques and rapid etching and cleaning techniques. We also report experiments that elucidate the basic science of rapidly forming polymer walls. We combine these new achievements and understanding and demonstrate their utility by fabricating a flexible plastic LCD using techniques compatible with roll-to-roll manufacturing. Finally, we discuss the critical issues that must be addressed if flexible plastic LCD’s are to reach their full potential.

液晶ディスプレイにおける白色色度点の階調に対する変化と画質の関係 肌色評価への影響

Liquid-crystal displays (LCDs) are now widely used as computer display devices. Among them, twisted nematic (TN-mode) and super twisted nematic (STN-mode) displays are the most popular. The spectral transmittance of these LCDs, however, depends on the gray tone level so the gray tone color becomes bluish. We have therefore investigated the quality of the displays and in this study we focus on face color quality. We prepared test images by using a software program to add blue into the image data. Five different bluish levels were used in simulated TN-mode and STN-mode displays. Nine portraits were selected as the testing images. Test participants were asked to judge the quality of the faces according to a five-grade scale and judge the amount of blue according to an impairment scale. These test results show that face color quality is significantly affected by the bluish level of gray tones and that face-color quality is good when no blue is perceived in the face color. We then compared the simulated face color quality with the gray-tone chromaticity of three current TN-mode LCDs, and we found that two of them will be able to display good face colors.