Culturable Bacterial Aerosol Research Articles

Antibiotic resistance genes and antibiotic sensitivity in bacterial aerosols and their comparisons with known respiratory pathogens

Airborne transmission of antibiotic resistance genes (ARGs) has emerged as a global health threat, while their hosts’ resistance phenotype remains largely unknown. Here, culturable bacterial aerosol samples were collected from polluted air in Beijing using a portable high volume sampler (1000 L/min). Antimicrobial susceptibility testing was conducted to explore the antibiotic sensitivity of culturable bacterial aerosols to seven widely used antibiotics. As a comparison, ARG distribution and expression in two human respiratory pathogenic bacterial strains (Pseudomonas aeruginosa and Methicillin-resistant Staphylococcus aureus) and a non-pathogenic bacterial strain (Pseudomonas fluorescens) were also studied. Relative abundances of 39 ARG subtypes in three bacterial strains including Haemophilus influenzae were investigated by high throughput real-time qPCR platform. Surprisingly, 24.66% of the culturable bacterial aerosols in polluted air were resistant to vancomycin-the most powerful antibiotics to date, while 53.05% of airborne culturable bacteria were susceptible to ampicillin (β-lactams). Different bacteria demonstrated very different ARG distribution patterns of more or less skewed toward certain one ARG type. On the other hand, the vancomycin resistance gene vanB was detected both in H. influenza and P. fluorescens, however these bacteria did not exhibit anti-vancomycin phenotype. Furthermore, the resistance to ciprofloxacin (quinolones) was not observed in P. aeruginosa and P. fluorescens although these bacteria harbor abundant quinolone resistance gene qepA. Experimental data from this work show that air represents an important active reservoir of diverse ARGs, and some bacterial aerosols are harboring vancomycin resistance gene though not expressed. Results from human respiratory pathogens have further demonstrated similar findings. This work underscores the serious concern of airborne dissemination of ARBs including those resistant to vancomycin in polluted ambient environments, while revealing abundances and patterns of various ARGs in both pathogenic and non-pathogenic bacteria.

Seasonal concentrations and size distributions of culturable bacterial aerosols inside and outside university classrooms – A case study in Beijing

The risks of cross-infection among occupants will be greatly increased by the high occupant densities and mobility inside and outside university classrooms. In order to know the distribution characteristics of culturable bacterial aerosols in such public environments, during normal didactic activities, indoor and outdoor bacterial aerosols were sampled from December 2018 to December 2019 by using Andersen six-stage impactor in 11 university classrooms. The yearly average concentration of outdoor bacterial aerosols was 314 ± 229 CFU/m3, and the size mainly distributed within 2.1–4.7 μm. For unoccupied condition, indoor culturable bacterial aerosols were dominated by outdoors (R2 = 0.78), the yearly average concentration was 254 ± 130 CFU/m3, and the size mainly distributed within 1.1–3.3 μm. For occupied condition, the yearly average concentration of indoor bacterial aerosols was 494 ± 263 CFU/m3, and the size mainly distributed in the range of 1.1–4.7 μm. With human presence, occupants instead of outdoor air becoming the primary source of indoor culturable bacterial aerosols. The seasonal emission rates of bacterial aerosols resulted from occupants were in the order of summer > autumn > spring > winter, corresponding to 1538 ± 646, 850 ± 292, 592 ± 254, and 388 ± 219 CFU/person/h. Air temperature, relative humidity, and PM10 mass concentrations were main environmental factors (p < 0.01) to positively influence the concentrations distribution of indoor culturable bacterial aerosols. The results can provide basic data for evaluating the risks of occupants expose to bacterial aerosols and improving indoor microbial air quality in university classrooms.

Efficiency and Eco-Costs of Air Purifiers in Terms of Improving Microbiological Indoor Air Quality in Dwellings—A Case Study

Air pollution, a by-product of economic growth, generates an enormous environmental cost in Poland. The issue of healthy living spaces and indoor air quality (IAQ) is a global concern because people spend approximately 90% of their time indoors. An increasingly popular method to improve IAQ is to use air purifiers (APs). Indoor air is often polluted by bioaerosols (e.g., viruses, bacteria, fungi), which are a major concern for public health. This work presents research on culturable bacterial aerosol (CBA) samples collected from dwellings with or without active APs during the 2019 summer season. The CBA samples were collected using a six-stage Andersen cascade impactor (ACI). The CBA concentrations were expressed as Colony Forming Units (CFU) per cubic metre of air. The average concentration of CBA in dwellings when the AP was active was 450–570 CFU/m3, whereas the average concentration when the AP was not active was 920–1000 CFU/m3. IAQ, when the APs were active, was on average almost 50% better than in cases where there were no procedures to decrease the concentration of air pollutants. Moreover, the obtained results of the particle size distribution (PSD) of CBA indicate that the use of APs reduced the proportion of the respirable fraction (the particles &lt; 3.3 µm) by about 16%. Life cycle assessment (LCA) was used to assess the ecological cost of air purification. Our conceptual approach addresses the impact of indoor air pollution on human health and estimates the ecological cost of APs and air pollution prevention policies.

Air Quality and Potential Health Risk Impacts of Exposure to Bacterial Aerosol in a Waste Sorting Plant Located in the Mountain Region of Southern Poland, Around Which There Are Numerous Rural Areas

Many studies have shown an association between working in waste sorting plants (SP) and occupational health problems, such as skin irritation or pulmonary diseases. These symptoms have been related to biological aerosol exposure. The main goal of this work was to assess the levels of concentration and the characteristics of bacterial aerosols in waste sorting plants, based on measurements taken in a plant located in the mountain region of Southern Poland, around which there are numerous rural areas. The average concentrations of culturable bacterial aerosol (CCBA) collected in the unloading hall of the waste sorting plant (UHSP) and the outdoor air of the sorting plant (OSP) were 2687 CFU/m3 and 1138 CFU/m3, respectively. Sampling was undertaken in the plant using an Andersen six-stage impactor (with aerodynamic cut-off diameters of 7.0, 4.7, 3.3, 2.1, 1.1, and 0.65 μm), during the spring of 2019. Size distributions were unimodal, with a peak in particle bacterial aerodynamic diameters at less than 3.3 µm, increasing the potentially adverse health effects of their inhalation. An analysis was conducted to determine the antibiotic resistance of isolated strains of bacteria. During the study, it was found that isolates belonging to the genus Bacillus were most frequently detected in the waste sorting plant. Isolates with the highest resistance to antibiotics belonged to the genus Neisseria. This test indicates that the use of personal protective equipment is necessary.

Indoor Air Quality and Potential Health Risk Impacts of Exposure to Antibiotic Resistant Bacteria in an Office Rooms in Southern Poland.

The aims of this article are to characterize: the quantity of culturable bacterial aerosol (QCBA) and the quality of culturable bacterial aerosol (QlCBA) in an office building in Southern Poland during the spring. The average concentration of culturable bacterial aerosol (CCBA) in this building ranged from 424 CFU m−3 to 821 CFU m−3, below Polish proposals for threshold limit values. Size distributions were unimodal, with a peak of particle bacterial aerodynamic diameters less than 3.3 μm, increasing potentially adverse health effects due to their inhalation. The spring office exposure dose (SPED) of bacterial aerosol was estimated. The highest value of SPED was in April (218 CFU kg−1), whereas the lowest was in June (113 CFU kg−1). Analysis was undertaken to determine the antibiotic resistance of isolated strains and their ability to form biofilms, which may facilitate the spread of antibiotic resistance genes. In the course of the study, it was found that Staphylococcus xylosus had the greatest ability to form biofilms, while the strains with the highest antibiotic resistance were Micrococcus luteus D and Macrococcus equipercicus. Given that mainly antibiotic-sensitive bacteria from bioaerosol were isolated, which transfers resistance genes to their plasmids, this shows the need for increased monitoring of indoor air quality in workplaces.

Influence of meteorological factors on the level and characteristics of culturable bacteria in the air in Gliwice, Upper Silesia (Poland)

Numerous studies have focused on occupational and indoor environments because people spend more than 90% of their time in them. Nevertheless, air is the main source of bacteria in indoors, and outdoor exposure is also crucial. Worldwide studies have indicated that bacterial concentrations vary among different types of outdoor environments, with considerable seasonal variations as well. Conducting comprehensive monitoring of atmospheric aerosol concentrations is very important not only for environmental management but also for the assessment of the health impacts of air pollution. To our knowledge, this is the first study to present outdoor and seasonal changes of bioaerosol data regarding an urban area of Poland. This study aimed to characterize culturable bacteria populations present in outdoor air in Gliwice, Upper Silesia Region, Poland, over the course of four seasons (spring, summer, autumn and winter) through quantification and identification procedures. In this study, the samples of bioaerosol were collected using a six-stage Andersen cascade impactor (with aerodynamic cut-off diameters of 7.0, 4.7, 3.3, 2.1, 1.1 and 0.65 μm). Results showed that the concentration of airborne bacteria ranged from 4 CFU m−3, measured on one winter day, to a maximum equal to 669 CFU m−3 on a spring day. The average size of culturable bacterial aerosol over the study period was 199 CFU m−3. The maximal seasonally averaged concentration was found in the spring season and reached 306 CFU m−3, and the minimal seasonally averaged concentration was found in the winter 49 CFU m−3. The most prevalent bacteria found outdoors were gram-positive rods that form endospores. Statistically, the most important meteorological factors related to the viability of airborne bacteria were temperature and UV radiation. These results may contribute to the promotion and implementation of preventative public health programmes and the formulation of recommendations aimed at providing healthier outdoor environments.

Seasonal Variation in Culturable Bioaerosols in a Wastewater Treatment Plant.

Bioaerosols produced from Wastewater Treatment Plants (WWTPs) can pose health risks to plant workers and nearby inhabitants. There is a gap in air quality data for WWTPs in developing countries. The present study aimed to measure airborne bacterial and fungal concentrations in a WWTP in southwestern Iran between September 2015 and May 2016. Active sampling was conducted around operational units, and a total of 600 bacterial and fungal samples were collected. Spatial and seasonal comparisons were made. The highest average concentrations of culturable bacterial aerosol at seasonally dependent locations were, in decreasing order, 2581 ± 401 and 1952 ± 390 CFU m-3 for the selector and aeration tanks, respectively, in autumn; 1363 ± 299 CFU m-3 for the aeration tank in winter; and 1738 ± 350 CFU m-3 for the screw pump in spring. Furthermore, the predominant genera of airborne fungi isolated from the air of the WWTP in all three seasons were Cephalotrichum spp., Alternaria spp., Penicillium spp., Monilia spp., and Aspergillus spp. The results of this work emphasize the necessity of controlling WWTP workers' exposure to bioaerosols when bacteria and fungi become aerosolized during aeration.

Concentration and Size Distribution of Culturable Bacteria in Ambient Air during Spring and Winter in Gliwice: A Typical Urban Area

The concentrations and size distributions of culturable bacterial aerosols were measured during spring and winter in outdoor air in Gliwice, Upper Silesia, Poland. This research on culturable bacteria was carried over a period of two years. The samples were collected using a six-stage Andersen cascade impactor (with aerodynamic cut-off diameters of 7.0, 4.7, 3.3, 2.1, 1.1, and 0.65 μm). The results showed that the average concentration of culturable bacterial aerosol was 355 CFU m−3 in spring, which was four times higher than during winter (65 CFU m−3). Bacterial aerosol concentrations showed the unimodal size distribution with the highest range of 3.3–4.7 μm particles. The seasonal distributions of bacterial aerosol grain clearly indicate that, in winter, the size distribution of particles &lt;7 μm is more “flattened” and is characterized by an increased share of fine fractions and a decreased share of coarse ones. Environmental parameters, such as temperature, UV radiation, relative humidity, wind velocity, as well as PM10 and PM2.5 concentrations, were measured in order to analyse whether environmental factors had any effect on bacterial aerosols. Statistically, the most important meteorological factors in the viability of airborne bacteria were temperature and UV radiation.

A high-flow portable biological aerosol trap (HighBioTrap) for rapid microbial detection

Bioaerosols exposure can lead to many adverse health effects and even result in death if highly infectious agents involved. Apparently, there is a great need for rapid detection of bioaerosols, for which air sampling often is the first critical step. However, currently available samplers often either require an external power and/or with low sampling flow rate, thus falling short of providing a practical solution when response time is of great concern.Here, we have designed and evaluated a new portable high volume bioaerosol sampler named as HighBioTrap through optimizing its operating parameters. The sampler was operated at a sampling flow rate of 1200L/min, with an impaction velocity of about 10.2m/s (S/W = 1.5, T/W = 1), while the weight of the sampler is about 1.9kg. The performances of the HighBioTrap sampler were tested both in lab controlled and natural environments (outdoor and indoor environments in a university building) along with the reference sampler-the BioStage impactor using aerosolized Polystyrene (PS) uniform microspheres of various sizes, aerosolized bacteria and also ambient air particles. The microbial community structures of collected culturable bacterial aerosol particles both by the HighBioTrap and the BioStage impactor in the natural environments were analyzed using gene sequence method.Experimental results with PS particles showed the HighBioTrap has a cutoff size of ~ 2µm. The widely used impactor design equation was found to be not applicable for predicting the performance of the HighBioTrap due to its large Reynolds number. When sampling aerosolized individual Pseudomonas fluorescens and Bacillus subtilis bacterial particles, the HighBioTrap had physical collection efficiencies of 10% and 20%, respectively. Despite the higher desiccation effects introduced by higher flow rate, the HighBioTrap was shown to obtain a higher microbial diversity than the BioStage impactor for both in outdoor and indoor environments given the same sampling time (p < 0.01). Our data also showed that most of the desiccation effects might have occurred between 3 and 5min of the sampling and an impaction velocity of around 10m/s might be a close-to-optimal impaction velocity for collecting most environmental bacterial aerosols while maximally preserving their culturability. This work contributes to our understanding of microbial sampling stress (impaction velocity and sampling time), while developing a portable high volume sampler. The HighBioTrap sampler could find its great efficiencies in qualitative microbial aerosol detection and analysis, such as investigation of microbial aerosol diversity for a particular environment, or when the low level of pathogens is present and detection time is of great concern.

Onshore Wind Speed Modulates Microbial Aerosols along an Urban Waterfront

Wind blowing over aquatic and terrestrial surfaces produces aerosols, which include microbial aerosols. We studied the effect of onshore wind speeds on aerosol concentrations as well as total and culturable microbial aerosols (bacterial and viral) at an urban waterfront (New York, NY, United States of America). We used two distinct methods to characterize microbial aerosol responses to wind speed: A culture-based exposure-plate method measuring viable bacterial deposition near-shore (CFU accumulation rate); and a culture-independent aerosol sampler-based method measuring total bacterial and viral aerosols (cells m−3 air). While ambient coarse (&gt;2 µm) and fine (0.3–2 µm) aerosol particle number concentrations (regulated indicators of air quality) decreased with increasing onshore wind speeds, total and depositing culturable bacterial aerosols and total viral aerosols increased. Taxonomic identification of the 16S rDNA of bacterial aerosol isolates suggested both terrestrial and aquatic sources. Wind appears to increase microbial aerosol number concentrations in the near-shore environment by onshore transport at low wind speeds (&lt;4 m s−1), and increased local production and transport of new microbial aerosols from adjacent water surfaces at higher wind speeds (&gt;4 m s−1). This study demonstrates a wind-modulated microbial connection between water and air in the coastal urban environment, with implications for public health management and urban microbial ecology.

Culturable bioaerosols along an urban waterfront are primarily associated with coarse particles.

The source, characteristics and transport of viable microbial aerosols in urban centers are topics of significant environmental and public health concern. Recent studies have identified adjacent waterways, and especially polluted waterways, as an important source of microbial aerosols to urban air. The size of these aerosols influences how far they travel, their resistance to environmental stress, and their inhalation potential. In this study, we utilize a cascade impactor and aerosol particle monitor to characterize the size distribution of particles and culturable bacterial and fungal aerosols along the waterfront of a New York City embayment. We seek to address the potential contribution of bacterial aerosols from local sources and to determine how their number, size distribution, and taxonomic identity are affected by wind speed and wind direction (onshore vs. offshore). Total culturable microbial counts were higher under offshore winds (average of 778 CFU/m3 ± 67), with bacteria comprising the majority of colonies (58.5%), as compared to onshore winds (580 CFU/m3 ± 110) where fungi were dominant (87.7%). The majority of cultured bacteria and fungi sampled during both offshore winds (88%) and onshore winds (72%) were associated with coarse aerosols (>2.1 µm), indicative of production from local sources. There was a significant correlation (p < 0.05) of wind speed with both total and coarse culturable microbial aerosol concentrations. Taxonomic analysis, based on DNA sequencing, showed that Actinobacteria was the dominant phylum among aerosol isolates. In particular, Streptomyces and Bacillus, both spore forming genera that are often soil-associated, were abundant under both offshore and onshore wind conditions. Comparisons of bacterial communities present in the bioaerosol sequence libraries revealed that particle size played an important role in microbial aerosol taxonomy. Onshore and offshore coarse libraries were found to be most similar. This study demonstrates that the majority of culturable bacterial aerosols along a New York City waterfront were associated with coarse aerosol particles, highlighting the importance of local sources, and that the taxonomy of culturable aerosol bacteria differed by size fraction and wind direction.

Bacterial aerosols in an urban nursery school in Gliwice, Poland: a case study

This work presents the results of the study of airborne bacteria in a kindergarten in Gliwice, Upper Silesia, Poland. In this study, the samples of bioaerosols were collected using six-stage Andersen cascade impactor (with aerodynamic cutoff diameters 7.0, 4.7, 3.3, 2.1, 1.1, and 0.65 μm). The level of culturable bacterial aerosols indoors was about 3000 CFU m−3—six to eight times higher than outdoors. In the classrooms, respirable bacterial particles, <4.7 µm, contributed up to 85 % of the total number of culturable bacteria, increasing the possible adverse health effects due to their inhalation. The identification of the bacterial species showing the dominance of gram-positive cocci in the indoor environment and non-sporing gram-positive rods in the outdoor air indicates that most of the bacteria present in the studied kindergarten are human origin. Using the obtained data, the nursery school exposure dose (NSED) of bioaerosols was estimated for the children and personnel of this kindergarten (nursery school). The highest value of NSED was obtained for younger children (930 CFU kg−1) compared to older children (about 600 CFU kg−1) and to the kindergarten staff (about 300 CFU kg−1). This result suggests the elevated risk of adverse health effects in younger children exposed to the bioaerosols in the kindergarten, including infections.

Seasonal variation in the concentrations of culturable bacterial and fungal aerosols in underground subway systems

The concentrations of total culturable bacterial and fungal aerosols in underground subway systems were determined by quantitative measurements. In addition, concentrations of airborne bacteria and fungi were observed at different locations in a subway station. We found that bacterial aerosol concentration in the subway systems varied throughout the seasonal transitions from spring to summer and from fall to winter. Bacterial aerosol concentrations increased by more than three times from March to April, and decreased by more than two times from October to November. The results of t-test showed that these changes were statistically significant. The number of passengers had a small effect on the concentration of bacterial aerosols in the subway station. However, fungal aerosols are relatively unaffected by seasonal changes and human presence. These experimental results provide useful and basic guidelines for analyzing existing methods and developing new methods to control airborne microorganisms in underground subway stations by providing information on initial air quality conditions.

Bioaerosol emissions and detection of airborne antibiotic resistance genes from a wastewater treatment plant

Abstract Air samples from twelve sampling sites (including seven intra-plant sites, one upwind site and four downwind sites) from a wastewater treatment plant (WWTP) in Beijing were collected using a Reuter Centrifugal Sampler High Flow (RCS); and their microbial fractions were studied using culturing and high throughput gene sequence. In addition, the viable (fluorescent) bioaerosol concentrations for 7 intra-plant sites were also monitored for 30 min each using an ultraviolet aerodynamic particle sizer (UV-APS). Both air and water samples collected from the plant were investigated for possible bacterial antibiotic resistance genes and integrons using polymerase chain reaction (PCR) coupled with gel electrophoresis. The results showed that the air near sludge thickening basin was detected to have the highest level of culturable bacterial aerosols (up to 1697 CFU/m3) and fungal aerosols (up to 930 CFU/m3). For most sampling sites, fluorescent peaks were observed at around 3–4 μm, except the office building with a peak at 1.5 μm, with a number concentration level up to 1233–6533 Particles/m3. About 300 unique bacterial species, including human opportunistic pathogens, such as Comamonas Testosteroni and Moraxella Osloensis, were detected from the air samples collected over the biological reaction basin. In addition, we have detected the sul2 gene resistant to cotrimoxazole (also known as septra, bactrim and TMP-SMX) and class 1 integrase gene from the air samples collected from the screen room and the biological reaction basin. Overall, the screen room, sludge thickening basin and biological reaction basin imposed significant microbial exposure risks, including those from airborne antibiotic resistance genes.

Charge levels and Gram (±) fractions of environmental bacterial aerosols

Here, we investigated charge levels and Gram (+/–) fractions of environmental bacterial aerosols. The bioaerosols with +/– charges were collected separately over different time periods using an electrostatic sampler. Air samples were cultivated using selective media for G+ and G–, and further confirmed by Gram stain method. In addition, the viable bioaerosol size distributions over a 24h time period were also obtained using an ultraviolet aerodynamic particle sizer (UV-APS). Finally, the elementary charge units carried by environmental G+ and G– bacterial aerosols were derived based on distribution-weighted particle aerodynamic diameters.Results showed that G+ had equal abundances with G– regardless of the charge polarity and environments. The outdoor viable bioaerosols were observed to have slightly smaller distribution-weighted particle size (1.64µm) than that (1.79µm) of the indoor environment. In general, the outdoor culturable bacterial aerosol charge levels turned to be normally-distributed with a peak around 21–29 elementary charge units, while the indoor ones seemed to be skewed toward 46–92 elementary charge units. Results here suggest that a significant fraction of viable-but-not-culturable (VBNC) bioaerosol particles might be present for indoor environments. Results here can not only help design better electrostatic sampling device, but also assist in bioaerosol exposure assessment.

Aeration remediation of a polluted waterway increases near-surface coarse and culturable microbial aerosols

Aeration remediation is currently used in polluted urban waterways to increase oxygen levels in the water column. Recent studies have provided increasing evidence that the bursting of bubbles at water surfaces introduced by aeration, or other surface disturbances, can transfer viable bacteria to the air. In heavily sewage-polluted waterways these water-originated bacterial aerosols may pose as a health risk to recreators in small boats or residents inhabiting the shoreline. Nonetheless, few studies have explored aerosols above active aeration remediation projects in waterways or investigated how bacterial aerosols change with vertical distance from aeration activities. This study, conducted at the Newtown Creek superfund site in Brooklyn, NY, USA, measured coarse aerosol particles and culturable bacteria in near-surface air above waters undergoing aeration remediation. Regardless of aeration operation culturable bacterial fallout was greater near-surface (0.6m above water) than previously-reported measurements made at 2.5m. Molecular analysis of the 16S rRNA gene sequences from isolated bacteria demonstrates that water and air shared a large number of bacterial genera and that the genera present in the near-surface aerosols (0.6m) contained water-associated Vibrio and Caulobacter, which were not present at 2.5m, despite the smaller sequence library size from the near-surface. Also, the near-surface microbial assemblage had significantly greater association with sequences detected previously in aquatic environments compared to the 2.5m library. We found compelling evidence that aeration activity contributed to this vertical gradient in bacterial aerosol concentrations and identity. Similar to results from 2.5m, concentrations of near-surface respirable coarse aerosols (<10 um) increased significantly when aeration was occurring. Culturable bacterial aerosol fallout was also greater near-surface when the aerator was on compared to simultaneous measurements made at 2.5m. Furthermore, when the aerator was operating, the near-surface bacterial aerosol assemblage was statistically more similar to water assemblages than when the aerator was off. These findings highlight the potential for aeration remediation to increase exposure to viable bacterial aerosols in recreators (e.g. kayakers), a problem of greater concern where surface water is heavily polluted with sewage, as in Newtown Creek.

Negatively and positively charged bacterial aerosol concentration and diversity in natural environments

Bioaerosol charge information is of vital importance for their electrostatic collection. Here, electrostatic means and molecular tools were applied to studying bioaerosol charge dynamics. Positively or negatively charged bioaerosols were collected using an electrostatic sampler operated with a field strength of 1.1 kV cm−1 at a flow rate of 3 L min−1 for 40 min. Those with fewer or no charges bypassing the sampler were also collected using a filter at the downstream of the electrostatic sampler in one environment. The experiments were independently conducted three times in three different environments. The collected bacterial aerosols were cultured directly on agar plates at 26°C, and the colony forming units (CFU) were manually counted. In addition, the CFUs were washed off from the agar plates, and further subjected to polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE) for culturable diversity analysis. The results revealed remarkable differences in positively and negatively charged culturable bacterial aerosol concentration and diversity among the studied environments. In the office environment, negatively charged culturable bacterial aerosols appeared to dominate (P = 0.0489), while in outdoor and hotel environments both polarities had similar concentration levels (P = 0.078, P = 0.88, respectively). DGGE patterns for positively charged culturable bacterial aerosols were shown strikingly different from those of negatively charged regardless of the sampling environments. In addition, for each of the environments positively charged culturable bacterial aerosols collected were found to have more band pattern similarity with those positively charged for respective regions of agar plates than those negatively charged, and vice versa. The information developed here is useful for developing efficient electrostatic sampling protocols for bioaerosols.

Seasonal evaluation of fine and coarse culturable bacterial aerosols from residences within a rural and an urban city in Egypt

Non-complaint Egyptian homes were examined to determine the residential culturable airborne bacterial concentrations so that these could be used as comparisons in indoor air quality investigations. Concentrations of airborne bacteria were investigated in 26 urban flats across Cairo and 17 rural flats in the Dakahlia governorate. Air samples were collected using a two-stage viable cascade impactor sampler, dividing particles into coarse (>8 μm) and fine (<8 μm) sizes. For urban flats, the year's median indoor and comparison site concentrations were 9133 CFU/m3 and 9423 CFU/m3, respectively. For rural flats, the year's median indoor and comparison site concentrations were 15,915 CFU/m3 and 10,859 CFU/m3, respectively. The median indoor bacterial concentrations increased in winter and spring compared to autumn and summer. Winter months had the greatest median concentration for coarse indoor organisms, whereas spring had the largest for the fine indoor organisms. Fine bacterial concentration composed more than 60% of the indoor bacterial fraction.

Applicability of a modified MCE filter method with Button Inhalable Sampler for monitoring personal bioaerosol inhalation exposure

In this study, a "modified" mixed cellulose ester (MCE) filter culturing method (directly placing filter on agar plate for culturing without extraction) was investigated in enumerating airborne culturable bacterial and fungal aerosol concentration and diversity both in different environments. A Button Inhalable Sampler loaded with a MCE filter was operated at a flow rate of 5 L/min to collect indoor and outdoor air samples using different sampling times: 10, 20, and 30 min in three different time periods of the day. As a comparison, a BioStage impactor, regarded as the gold standard, was operated in parallel at a flow rate of 28.3 L/min for all tests. The air samples collected by the Button Inhalable Sampler were directly placed on agar plates for culturing, and those collected by the BioStage impactor were incubated directly at 26 °C. The colony forming units (CFUs) were manually counted and the culturable concentrations were calculated both for bacterial and fungal aerosols. The bacterial CFUs developed were further washed off and subjected to polymerase chain reaction-denaturing gradient gel electrophoresis (DGGE) for diversity analysis. For fungal CFUs, microscopy method was applied to studying the culturable fungal diversity obtained using different methods. Experimental results showed that the performance of two investigated methods varied with sampling environments and microbial types (culturable bacterial and fungal aerosols). For bacterial aerosol sampling, both methods were shown to perform equally well, and in contrast the "modified" MCE filter method was demonstrated to enumerate more culturable fungal aerosols than the BioStage impactor. In general, the microbial species richness (number of gel bands) was observed to increase with increasing collection time. For both methods, the DGGE gel patterns were observed to vary with sampling time and environment despite of similar number of gel bands. In addition, an increase in sampling time from 20 to 30 min was found not to substantially alter the species richness. Regardless of the sampling methods, more species richness was observed in the outdoor environment than the indoor environment. This study described a new personal bioaerosol exposure assessment protocol, and it was demonstrated applicable in monitoring the personal bioaerosol exposure in replace of an Andersen-type impactor.

Local Environmental Pollution Strongly Influences Culturable Bacterial Aerosols at an Urban Aquatic Superfund Site

In polluted environments, when microbial aerosols originate locally, species composition of the aerosols should reflect the polluted source. To test the connection between local environmental pollution and microbial aerosols near an urban waterfront, we characterized bacterial aerosols at Newtown Creek (NTC), a public waterway and Superfund site in a densely populated area of New York, NY, USA. Culturable bacterial aerosol fallout rate and surface water bacterial concentrations were at least an order of magnitude greater at NTC than at a neighboring, less polluted waterfront and a nonurban coastal site in Maine. The NTC culturable bacterial aerosol community was significantly different in taxonomic structure from previous urban and coastal aerosol studies, particularly in relative abundances of Actinobacteria and Proteobacteria. Twenty-four percent of the operational taxonomic units in the NTC overall (air + water) bacterial isolate library were most similar to bacterial 16S rRNA gene sequences previously described in terrestrial or aquatic environments contaminated with sewage, hydrocarbons, heavy metals, and other industrial waste. This study is the first to examine the community composition and local deposition of bacterial aerosols from an aquatic Superfund site. The findings have important implications for the use of aeration remediation in polluted aquatic environments and suggest a novel pathway of microbial exposure in densely populated urban communities containing contaminated soil and water.